A-B1H-100-11 (1)
Audio Player
fo r Ad a p t e r
Operating Instructions
2001 Sony Corporation
Table of contents
What you can do with the Audio Player
for Adapter .......................................... 4
Playing audio files on your CLIÉ
handheld ............................................ 17
To Listen to MP3 format audio files on
your CLIÉ handheld ................................ 5
Connecting the supplied headphones .. 17
Playing audio files................................ 18
Playing in various modes ..................... 21
Installing the software ......................... 6
Installing Audio Player for Adapter to
your CLIÉ handheld ................................ 6
Selecting playback audio
files (Pick up) ....................................... 22
Re-install the Audio Player for Adapter . 7
Switching the display view .................. 23
Importing audio files into your
computer .............................................. 9
Switching the JogDial navigator function
for Audio Player for Adapter ................ 24
Installing RealJukebox for
Sony software ...................................... 11
Playing audio files with the Audio
Adapter................................................ 26
Setting recording preferences of
RealJukebox......................................... 12
Notes on Memory Stick media ........... 28
Notes on using RealJukebox .............. 30
Importing audio files into your computer
with RealJukebox for Sony ................... 13
Audio Player for Adapter
menu items ........................................ 31
Transferring audio files from your
computer to your CLIÉ handheld ....... 14
Problems for Audio Player
for Adapter ........................................ 33
Preparing your CLIÉ handheld.............. 14
On playback ......................................... 33
Transferring MP3 format audio files to
your CLIÉ handheld .............................. 16
On the connection with your
computer ............................................. 34
Other ................................................... 35
3
What you can do with the Audio Player for
Adapter
Audio Player for Adapter is an application used to play MP3 format audio
files on your CLIÉ handheld.
Audio Player for Adapter supports MP3 files that meet follow ing
specifications
• Format: MP3 (MPEG-1, Audio Layer-3)
• Sampling frequency: 44.1 kHz
• Bit rate: 32 to 128 kbps
• File extension: .mp3 or .rmp
To confirm the format of the audio files, see 31 page.
You may not be able to play back all audio files that meet the above
requirements.
A Memory Stick media is required to play audio files on your CLIÉ
handheld
There are two types of Memory Stick media. One is the normal Memory
Stick media (purple), and the other is the “MagicGate Memory Stick” media
(white).
You can play audio files that are stored in both standard Memory Stick
media and “Magicgate memory Stick” media with Audio Player for
Adapter.
However, you cannot play ATRAC3 format audio files managed by OpenMG
Jukebox software (supplied with the CLIÉ handheld PEG-N710C/PEG-N760C,
etc).
No t e
You cannot use Audio Player for Adapter to play back audio files while you use
another application simultaneously.
4
What you can do with the Audio Player for Adapter
To Listen to MP3 format audio files on your CLIÉ handheld
You need to have;
• Memory Stick media (not supplied).
• Any software for managing MP3 format audio file on your computer.
(e.g.,RealJukebox)
To listen to MP3 format audio files w ith your CLIÉ handheld, follow
these steps.
Install Audio Player for Adapter on your CLIÉ handheld. (See
page 6)
1
Prepare any MP3 audio files for playback on your computer
For details, see the manual or online help of your software for managing
MP3 format audio files.
2
Transfer audio files from your computer to your CLIÉ
handheld. (See page 16)
3
Play audio files on your CLIÉ handheld. (See page 18)
4
5
Installing the software
Installing Audio Player for Adapter to your CLIÉ handheld
Install the Audio Player for Adapter to your CLIÉ handheld by the
procedures below.
No t e
Make sure that your CLIÉ handheld and computer can operate HotSync by attaching
your CLIÉ handheld to the cradle or the USB cable before installing the software. For
details on how to connect your CLIÉ handheld and your computer, and how to
operate HotSync, refer to the Operating Instructions of the CLIÉ handheld.
Insert the installation CD-ROM supplied with Audio Adapter
PEGA-SA10 into the CD-ROM drive of your computer.
1
The setup program starts automatically.
Click [Install Audio Adapter system files].
2
Install the Audio Player for Adapter following the displayed
instructions.
3
Select the model of your CLIÉ handheld on the model selection screen.
No t e s
• If you use multiple models, install the software for each model.
• Select the model name of your CLIÉ handheld on the select user name screen.
Click [Finish] on the screen to complete the installation.
Audio Player for Adapter is transferred to CLIÉ (Sony PDA) Palm
Desktop software.
4
Connect your CLIÉ handheld to the computer by the cradle or
the USB cable and perform the HotSync.
5
Audio Player for Adapter is installed to your CLIÉ handheld.
Click [Exit] to complete the set-up program on the computer.
6
Perform soft-reset of your CLIÉ handheld following the
displayed instructions.
7
6
Installing the software
Re-install the Audio Player for Adapter
If you hard-reset your CLIÉ handheld, or delete the Audio Player for
Adapter, perform the following procedures to re-install the Audio Player for
Adapter.
Double-click Palm Desktop for CLIÉ (Sony PDA Palm Desktop)
icon on the Windows desktop.
1
The CLIÉ Palm Desktop software starts.
Click [Install].
The Install Tool dialog box appears.
2
Select a user name from the user list.
3
Click [Add].
Make sure that the Add-on folder is selected.
4
If the Add-on folder is not selected, select it manually.
At the default setup, the Add-on folder is stored in the Sony Handheld
folder of the Program Files folder.
Double-click the AudioAdapter folder.
5
Double-click the Audio Player folder.
6
Double-click AudioPlayAUAE.prc.
AudioPlayerAUAE.prc is added to the File Name list.
7
Repeat steps from 4 to 6, and then double-click
AudioPlayerSkin.prc.
8
AudioPlayerSkin.prc is added to the File Name list.
If you use the PEG-T415 and re-install Audio Player for Adapter after
performing hard-reset of your CLIÉ handheld, add the update file
(update 2.0-T415) to the File Name list by following step 4 to 6.
Click [Done].
9
Click [OK].
10
Continued on next page
7
Installing the software
Connect your CLIÉ handheld to the computer by the cradle
or the USB cable and perform the HotSync.
11
AudioPlayAUAE.prc and AudioPlayerSkin.prc are installed on your
CLIÉ handheld during the HotSync operation.
After the HotSync operation ends, tap [Reset] on your CLIÉ
handheld screen.
12
After installing the softw are, performing soft-reset of your CLIÉ
handheld is required.
If you install Audio Player for Adapter using another procedure, you have
to perform soft-reset of your CLIÉ handheld after installation.
If you w ant to delete Audio Player for Adapter from your CLIÉ
handheld
• See “Removing add-on applications” in the operating Instructions
supplied with your CLIÉ handheld.
• After deleting Audio Player for Adapter, perform soft-reset of your CLIÉ
handheld
If you delete Audio Player for Adapter manually not performing the
operation in “Removing add-on applications” in the operating
Instructions supplied w ith your CLIÉ handheld.
Delete AudioPlayerSkin.prc manually at the same time you delete Audio
PlayAUAE.prc.
8
Importing audio files into your computer
You need to import audio files into your computer and convert audio files to
MP3 format, before you play back audio files using Audio Player for
Adapter.
To import MP3 format audio files to your computer
You need the software that creates MP3 format audio files on your
computer. If you do not have any commercially available audio file
managing software, use RealJukebox2 Basic for Sony (Referred to as
“RealJukebox for Sony” hereon), contained in the Installation CD-ROM of
Audio Player for Adapter.
The formats of audio files you can play back
You can playback MP3 format audio files that are created by the following methods;
• Audio files recorded and converted to the MP3 format from audio CDs
inserted into the CD-ROM drive of the computer to the PC hard disk.
• Already converted MP3 audio files.
System requirements
Before installing RealJukebox for Sony software, make sure that your
computer meets the following hardware requirements.
• IBM computer/AT or Compatible
– CPU: MMX Pentium® 200 MHz or higher
– Hard disk drive space: 215 MB or more
(15MB: for software, 200MB: for audio data)
– RAM: 64 MB or higher
– CD-ROM drive
– Sound Board
– USB port
• Operating System: Windows® 98/Windows® 98 Second Edition/
Windows® 2000 Professional/Windows® Me/Windows® XP
(manufacturer installed)
• Display: High (16 bit) Color or better (800 × 600 pixels or higher)
• Internet access: Recommended
Continued on next page
9
Importing audio files into your computer
No t e s
• We do not assure trouble-free operation for all computers that satisfy the system
requirements.
• If you use Windows 2000 professional Edition, use the Administrator’s user name to
install software.
• The following environments are not supported:
–Windows® 95, Windows® NT
–A system upgraded from Windows® 3.1/95 to Windows® 98/Windows® 98 Second
Edition/Windows® Me/Windows® XP
10
Importing audio files into your computer
Installing RealJukebox for Sony softw are
No t e
If the “Installing:” message continues to appear without advancing to the next step for
some time, click the “InstallShield Wizard” on the taskbar.
Exit all applications and follow the steps below on your
computer.
1
Insert the installation CD-ROM into the CD-ROM drive of your
computer.
2
The setup program starts automatically.
Click [Install RealJukebox2 Basic for Sony].
3
Click [Accept] after you read the information on the screen.
4
Click [Next].
5
Confirm the contents and fill in the blanks, and then click
[Finish].
6
It is recommended to check the [Add a desktop shortcut to RealJukebox]
checkbox.
The install procedure of the RealJukebox for Sony starts.
No t e
Do not delete, move, or edit the installed folders using Windows Explorer or any
other application. If you do so, the RealJukebox Basic database may become unstable
or corrupted.
11
Importing audio files into your computer
Setting recording preferences of RealJukebox
After installing the RealJukebox software, change recording preferences of
the RealJukebox to encode in MP3 audio files that can be played back with
the Audio Player for Adapter.
Double-click the RealJukebox icon on your Windows desktop,
or click [Start], point to [Programs], [Real], [RealJukebox], and
then click [RealJukebox].
1
RealJukebox for Sony starts.
Follow the instructions on the setup screen.
Set as follows on the main screen of RealJukebox.
2
1
Click [Tools] - [Preferences] from the menu bar, and then select the
[Audio Quality] screen.
- Select MP3 Audio in [Select a Format].
- Select 96kbps stereo in [Select a Quality Level].
- Click the icon of the [Security my Music Files when encoding]
checkbox to delete its check in the [Secure Files]. The warning
message about copyright appears.
2 Read the warning message and click the icon of the [I accept the above
terms] checkbox.
3 Click [OK].
Click [OK].
The setting of RealJukebox is complete.
3
12
Importing audio files into your computer
Importing audio files into your computer w ith
RealJukebox for Sony
The following procedure describes the basic operation for importing audio
files to your computer. For more information on RealJukebox, refer to the
online manual and following resources.
• Support service for RealJukebox is also available through e-mail at
The RealJukebox software is the product of RealNetworks, Inc.
Double-click the RealJukebox icon on your Windows desktop,
or click [Start], point to [Programs], [Real], [RealJukebox], and
then click [RealJukebox].
1
RealJukebox starts.
Insert the CD you want to record into the CD-ROM drive of
your computer.
2
The Auto-Record dialog box appears.
Click [Yes, record the CD now] and then click [OK].
Recording starts.
3
When recording completes, MP3-format audio data is saved to the folder at
C:\My Music\(Artist’s name)\(CD Title).
To stop recording
Click
(Stop).
13
Transferring audio files from your computer to
your CLIÉ handheld
To transfer audio files, MS Export application needs to be installed onto your
CLIÉ handheld. MS Export is stored in CD-ROM included with CLIÉ
handheld. For details, refer to the operating instructions of CLIÉ handheld.
Preparing your CLIÉ handheld
After making sure that the write protect tab is not set to
LOCK, insert the Memory Stick media into the Memory Stick
slot.
1
Memory Stick indicator
The Memory Stick indicator
lights in orange while
accessing a
Memory Stick media
On the home screen, rotate the JogDial navigator to select
AudioPlayer and then press the JogDial navigator.
2
Or, tap the AudioPlayer icon on the home screen.
Continued on next page
14
Transferring audio files from your computer to your CLIÉ
handheld
Audio Player for Adapter starts.
Connect your CLIÉ handheld to your computer by the cradle
or the USB cable.
3
Tap [Menu]
, [Options], and then [Transfer].
4
Audio Player for Adapter enters the file transfer mode.
When you use Audio Player for Adapter
• Make sure that the cradle is connected to the AC power adapter, or that the battery
is fully charged.
• Once transfering has started, the Memory Stick indicator of the CLIÉ handheld
flashes.
Do not do any of the following until transfering is complete:
– Disconnect the USB cable.
– Remove the Memory Stick.
– Remove your CLIÉ handheld from the cradle.
– Tap Exit on the Audio Player for Adapter application.
– Press any application buttons on your CLIÉ handheld or the HotSync button on the
cradle.
– Tap home icon
on your CLIÉ handheld.
15
Transferring audio files from your computer to your CLIÉ
handheld
Transferring MP3 format audio files to your CLIÉ handheld
After preparing your CLIÉ handheld in the procedures on page 14-15, you
can copy MP3 format audio files to your CLIÉ handheld using Windows
Explorer.
Double-click the My Computer icon on your Windows
desktop.
1
The CLIÉ handheld in the audio files transferring mode is recognized as a
Removable Disc and displayed on the My Computer screen.
Double-click the Removable Disc icon.
2
Double-click the Palm, Programs, and then MSAudio folder.
If these folders do not exist, make them manually in the Memory Stick
media using Windows Explorer.
3
Drag and drop MP3 format audio files that you want to
transfer to the MSAudio folder.
4
No t e
If the auto power off function of the CLIÉ handheld is activated during the above
procedure, the CLIÉ handheld and your computer are disconnected.
In this case, turn on the CLIÉ handheld and exit the audio files transferring mode on
the screen. And then do Step 4 of the procedure on page 15 to switch to the audio files
transferring mode again.
When you use the computer w ith Memory Stick slot
You can copy MP3 format audio files directly to the Memory Stick media
inserted to the Memory Stick slot of your computer and playback them with
Audio Player for Adapter.
In this case, create the PALM\PROGRAMS\MSAUDIO folder in the
Memory Stick media, and then copy the audio files to the MSAUDIO folder.
To delete the transferred audio files
Perform the above Steps 1, 2 and 3 of the procedure, and then delete the
audio files on Explorer of your computer.
16
Playing audio files on your CLIÉ handheld
Connecting the supplied headphones
Connect the headphones to the mini-plug of the Audio
Adapter.
1
Connect the Audio Adapter to your CLIÉ handheld.
2
No t e s
• While Audio Player for Adapter is running, operation beep sounds are output from
the headphones. They are not output from the CLIÉ handheld itself. However,
warning or error sounds are output from the CLIÉ handheld.
• While Audio Player for Adapter is running, you cannot use the beaming function
(infrared data transfer).
17
Playing audio files on your CLIÉ handheld
Playing audio files
Play songs as follows using Audio Player for Adapter.
Charge the battery fully before starting playback.
No t e s
• If the battery power level of CLIÉ handheld runs low, playback stops automatically.
In this case, you can still use other applications such as Memo Pad or Address Book.
Remove the Audio Adapter and charge the battery before it becomes completely
empty.
• If the battery power level of your CLIÉ handheld runs low, power may turn off
suddenly or an error message may appear when you start the Audio Player for
Adapter.
Connect the headphones to your Audio Adapter.
1
Connect the Audio Adapter to your CLIÉ handheld.
2
Insert the Memory Stick media into the Memory Stick slot of
your CLIÉ handheld.
3
On the home screen, rotate the JogDial navigator to select
Audio Player and then press the JogDial navigator.
4
Or, tap the Audio Player icon on the home screen.
Audio Player for Adapter starts and then reads the TOC information
including the song name, artist name and so on of the Memory Stick
media.
While TOC reading, the Memory Stick indicator of the CLIÉ handheld
flashes.
Do not remove the Memory Stick media at this time. If you do, the audio
data may be damaged and a malfunction may occur.
No t e s
• Unless the built-in battery of the CLIÉ handheld is sufficiently charged, a
malfunction may occur, e.g., Audio Player for Adapter does not start, does not
operate, or suddenly turns off. Be sure to check the remaining battery charge before
using the Audio Player for Adapter.
• Depending on the number of songs stored in the Memory Stick media, it may take
several seconds to read the TOC data. You cannot operate Audio Player for Adapter
while it is reading the TOC information including the song name, artist name and
so on; this is not a malfunction.
Continued on next page
18
Playing audio files on your CLIÉ handheld
Tap
.
5
Playback starts from the first song.
Song information appears during playback.
Playback stops automatically when the song reaches the end.
If you cannot start playback
Make sure that the HOLD switch on your Audio Adapter is not set to
ON.
To stop playback
Tap
.
To perform the follow ing operations
Pause
Tap
.
.
Go to the beginning of the current track
Go to previous tracks
Tap
Tap
repeatedly.
Go to the beginning of the next track
Go to the beginning of succeeding tracks
Go backward
Tap
.
Tap
repeatedly.
and hold.
and hold.
Press
Press
Go forward
Continued on next page
19
Playing audio files on your CLIÉ handheld
Adjusting the volume
You can adjust the volume in one of the following ways:
• Tap
or
.
• Rotate the Jog Dial navigator.
• Press the scroll buttons of the CLIÉ handheld.
Protecting your hearing (AVLS)
The AVLS (Automatic Volume Limiter System) function keeps down the
maximum volume to protect your ears.
To use AVLS, tap
to change it to
.
Notes on battery life during audio playback
With a fully-charged battery, you can play audio for the approximate length
of time specified below (if the back light is not used). The battery life varies
depending on the usage conditions and environment where you use your
handheld.
• PEG-T415: (Approx. 5 hours)
Since the battery power level falls rapidly during audio playback, the
Battery Low warning appears earlier than with normal use. In this case if
you stop audio playback immediately, you may still use other applications.
z Hint
To charge the battery of the CLIÉ handheld fully, charge the battery for
more than 2 hours after the remaining battery charge indication on the
Application Launcher screen becomes full.
20
Playing audio files on your CLIÉ handheld
Playing in various modes
Playing tracks repeatedly
Tap the repeat button to select the desired repeat playback item.
• REP OFF: normal playback
• REP ALL: repeat all tracks
• REP 1: repeat current playback track
You can use repeat playback during shuffle or reverse playback
For example, when you set shuffle playback to On during repeat playback, Audio
Player for Adapter plays all tracks repeatedly in random order.
Repeating a specific song portion (A-B repeat function)
You can choose to play a specific song portion repeatedly.
During playback, tap
at the repeat starting point.
.Playback starts from the first song.
1
The
icon changes to
Tap
The
at the repeat end point.
2
icon changes to
, and repeat playback starts between the
specified points.
To cancel the A-B repeat function
Tap to change the icon to
.
Playing tracks in random or reverse order
Tap the playback mode icon to select the desired playback item.
Each time you tap the playback mode icon, the playback mode changes.
• CONTINUE: normal playback
• SHUFFLE: play tracks in random order
• REVERSE: play backward from the last tracks played
No t e
When you tap REVERSE or SHUFFLE, the playback sound is momentarily
interrupted. This is not a malfunction.
21
Playing audio files on your CLIÉ handheld
Selecting playback audio files (Pick up)
Using the Audio Player for Adapter, you can select audio files for playback as
follows:
Tap [Menu]
The PickUp screen appears.
, [Tools], and then [PickUp].
1
2
Tap to select the check box of the audio file that you want to
play.
After selecting, tap [OK].
3
4
Start playback.
Audio Player for Adapter plays only selected audio files.
To play all audio files
Tap Select All in the Pick up screen.
22
Playing audio files on your CLIÉ handheld
Sw itching the display view
You can switch between the following two types of display view.
• Normal view : displays the title and artist name of the currently played
audio file, the number of audio files, and playback controls.
• List view : displays a title and an artist name of audio files that are stored
in the Memory Stick media. Playback controls are also displayed.
In List view, you can play the desired audio file by tapping the file
directly. You can also change displayed items by tapping
.
List view
• To change to the normal view, tap
• To change to the list view, tap
(normal).
(list).
23
Playing audio files on your CLIÉ handheld
Sw itching the JogDial navigator function for Audio Player
for Adapter
You can switch the JogDial navigator function for Audio Player for Adapter.
By simply using the JogDial navigator, you can adjust the volume, go to
specific tracks, fast-forward or fast-rewind.
Tap the JogDial icon at the top left of the screen, or hold the
JogDial navigator down for a few seconds.
1
The jog function select screen appears.
Tap the desired setup, or rotate the JogDial navigator to
select the desired setup.
2
• 1 (Volume control): you can adjust the volume by rotating the JogDial
navigator. When you press the JogDial navigator, the playback starts/
stops.
• 2 (AMS) : you can go to the beginning of the previous/succeeding
tracks by rotating the JogDial navigator. When you press the JogDial
navigator, the playback starts/stops.
• 3 (Speed): you can go backward/forward by rotating the JogDial
navigator. When you press the JogDial navigator, the playback starts/
stops.
• 4 (Position): you can control the playback point manually by rotating
the JogDial navigator. When you press the JogDial navigator, the
playback starts/stops.
• 5 (Scroll): when the List view is displayed, you can select the playback
audio file by rotating the JogDial navigator. When you press the
JogDial navigator, playback starts from the selected file.
Continued on next page
24
Playing audio files on your CLIÉ handheld
Tap [OK] or press the Jog Dial navigator.
3
The JogDial icon at the top left of the screen changes to the icon you
select, and the JogDial navigator function for Audio Player for
Adapter is switched to your choice.
25
Playing audio files on your CLIÉ handheld
Playing audio files w ith the Audio Adapter
If you turn off your CLIÉ handheld while Audio Player for Adapter is
running, you can turn the CLIÉ back on and start playback of songs by just
pressing the playback button. Otherwise, turn on your CLIÉ handheld and
start Audio Player for Adapter, and then follow this procedure:
Connect the headphones to your Audio Adapter.
1
Connect the Audio Adapter to your CLIÉ handheld.
2
Insert the Memory Stick media into the Memory Stick slot.
3
Press N on the Audio Adapter.
Playback starts from the first song.
4
Playback stops automatically when the song reaches the end.
To stop playback
Press x on the Audio Adapter.
No t e
If playback does not start even when you press N on the Audio Adapter, hold N
down again for a few seconds.
N/x button
./> button
Volume adjustment button
Continued on next page
26
Playing audio files on your CLIÉ handheld
To perform the follow ing operations
Pause
Press x.
Go to the beginning of the current track
Go to previous tracks
Go to the beginning of the next track
Go to the beginning of succeeding tracks
Go backward
Press ..
Press . repeatedly.
Press >.
Press > repeatedly.
Press . and hold.
Press > and hold.
Press + or –.
Go forward
Adjust the volume
Locking the controls (Hold)
To prevent the controls from being accidentally operated when you carry the
player, use the HOLD function.
Slide the HOLD switch of the Audio Adapter to ON.
None of the controls on the Audio Adapter will operate.
ON
HOLD switch
Sliding the HOLD switch of the Audio Adapter to ON, you cannot use the
buttons of the Audio Adapter, but you can use the buttons of the CLIÉ
handheld itself.
27
Notes on Memory Stick media
What is Memory Stick media?
Memory Stick media is a new compact, portable and versatile Integrated
Circuit recording medium with a data capacity that exceeds that of a floppy
disk. The Memory Stick media is specially designed for exchanging and
sharing digital data among Memory Stick media compatible products.
Because it is removable, a Memory Stick media can also be used for external
data storage.
Types of Memory Stick media
There are two types of Memory Stick media:
– “MagicGate Memory Stick” media (hereafter referred to as MG Memory
Stick) (white).
– Memory Stick media (purple).
You can use either Memory Stick media type to play back MP3 format audio
files.
No t e s
• You cannot play ATRAC3 audio files that are recorded or converted by OpenMG
Jukebox software with Audio Player for Adapter.
• Your CLIÉ handheld supports Memory Stick media with a capacity of up to 128 MB.
Notes on use
To avoid damaging data, do not
• remove the Memory Stick media or unplug the AC power adaptor during
reading or writing of data.
• use the Memory Stick media in a location subject to static electricity or
electric noise.
TOC reading time depends on the number of songs
When you start Audio Player for Adapter, the application starts reading the
TOC information including the song name, artist name and so on of the
Memory Stick media.
Depending on the number of songs stored in the Memory Stick media, it
may take a few seconds to do this. You cannot operate Audio Player for
Adapter while it is reading the TOC information; this is not malfunction.
Continued on next page
28
Notes on Memory Stick media
On formatting the Memory Stick media
The Memory Stick media is shipped with a FAT format as the standard
format.
To format the Memory Stick media, please use devices compatible with the
Memory Stick media. For details, refer to the Operating Instructions manual.
No t e
If you format your Memory Stick media using your computer, further operation with
your CLIÉ handheld is not guaranteed. Format the Memory Stick using the CLIÉ
handheld according to the procedures in the Operating Instructions manual.
29
Notes on using RealJukebox
Caution
When you use the external CD-ROM (including docking-station)
While using RealJukebox softw are, do not connect/remove the
external CD-ROM drive. If you w ant to connect/remove the
CD-ROM drive, turn off your computer, then connect/remove the
drive. If you do not, serious malfunction may occur.
30
Audio Player for Adapter menu items
This section discribes the menu commands specific to Audio Player for
Adapter. For common menu, see “Using the Edit menu” in the Operating
Instructions manual of CLIÉ handheld.
The following items appear when you tap the MENU icon.
Tools menu
About Memory Stick
Shows the information for the Memory Stick media inserted into your CLIÉ
handheld and album information of MP3 audio files.
About Album
Shows the current album information of MP3 audio files.
MP3 audio files in the Memory Stick media are managed as Album with
Audio Player for Adapter.
If you want to switch the album to be played, tap Custom Album, and then
desired album.
About Track
Shows the information for the track being played or selected.
Pickup
Shows the Pickup Mode screen to select playback audio files. For details, see
“Selecting playback audio files (Pick up)” on page 22.
Options menu
Transfer
Sets your CLIÉ handheld to the transfer mode.
The transfer mode screen appears and other controls will not operate.
Preferences
Shows the preference screen.
• Enable operation beep: if you want the beep to sound when you use
controls, tap to select the check box.
Continued on next page
31
Audio Player for Adapter menu items
• Reset PB mode by album change: if you want to reset the playback mode
to the factory preset setting when you change the album or the Memory
Stick media, tap to select the check box.
• JOG extended push: changes the function when you push the Jog Dial
navigator for a certain length of time. Tap to select the check box of the
desired function.
– Select JOG func: shows the jog function screen. For details, see
“Switching the Jog Dial navigator function for Audio Player for Adapter”
on page 24.
– Change view : switches the display view as follows:
Normal view c List view c Normal view c ...
For details, see “Switching the display view” on page 23.
About Audio Player
Shows the version information of the Audio Player for Adapter application.
32
Problems for Audio Player for Adapter
On playback
When CLIÉ handheld is turned off, you cannot start playback, even if
you press the N button.
, You can start playback if you turn off your CLIÉ handheld while
Audio Player for Adapter is running.
, Press N and hold for at least one second.
When you try to start Audio Player for Adapter after connecting the
Audio Adapter to your CLIÉ handheld, pow er turns off suddenly or
an error message appears.
, The built-in battery may not be fully charged. Depending the model,
an error message appears even if the remaining battery charge
indication is more than 30 % on the Launcher screen.
The number of audio files does not appear w hen you start Audio
Player for Adapter.
, When you insert the Memory Stick media which has many audio
files recorded, you cannot operate your Audio Player for Adapter
for a few seconds; this is not a malfunction.
There is no sound.
, Adjust the volume.
The volume does not increase.
, Cancel the AVLS function.
Sound skips.
, Playback sound may be distorted when you tap REVERSE or
SHUFFLE during playback.
, You may be attempting to play an MP3 file that is not encoded to
Audio Player Specifications.
Sound is distorted.
, If you record audio files with low bit rate, the sound of the audio files
may be distorted. However, this is not a malfunction. For details
about the bit rates that this application supports, see 4 page.
There is no sound from the one channel of the headphones.
, Make sure that the headphones plug is connected securely.
Continued on next page
33
Problems for Audio Player for Adapter
Cannot locate the next track.
, During shuffle playback without any repeat function, you cannot
locate the next track when you play the last track of the album. In
this case, set the playback mode to ALL REP and then locate the
track.
Playback has stopped suddenly.
, The battery is exhausted. You need to recharge it.
, The connector of the Memory Stick media may be dirty. Insert and
remove it several times.
, Start the Audio Player for Adapter and playback the audio files after
inserting and removing the connector of the Audio Adapter several
times.
The buttons on the remote controller do not operate.
, Make sure the HOLD switch on the remote controller is OFF.
, The battery is exhausted. You need to recharge it.
On the connection w ith your computer
The connection is cut suddenly.
, Connect the supplied AC power adapter to the cradle or recharge
your CLIÉ handheld fully.
, Make sure the your cradle or the USB cable is correctly connected to
your computer.
, Make sure that your CLIÉ handheld is correctly placed in your cradle
or the cable is connected securely.
There are only a few songs I can transfer (The recordable time
is short).
, The free memory space of the Memory Stick media in your CLIÉ
handheld may be less than the data of the songs you want to transfer.
Transfer unnecessary songs to your computer to make more memory
space.
Continued on next page
34
Problems for Audio Player for Adapter
Audio files in the Memory Stick media do not appear.
, Insert the Memory Stick media and then reconnect to your computer.
Your computer/CLIÉ handheld do not operate normally w hen they
are connected.
, If you are connecting both devices with a USB hub or a USB
extension cable, normal operation is not guaranteed. Please use only
the supplied dedicated USB cable.
A w arning message about the removal of the device appears on the
computer screen.
, Click [OK] and proceed.
, Do not tap [Exit] during audio data transfer.
, Do not detach the CLIÉ handheld from the cradle or do not
disconnect USB cable during audio data transfer.
, You must first stop the device via the “Unplug or eject hardware” in
the Windows System tray.
Other
Cannot insert the Memory Stick media
, Make sure that it is being inserted properly.
The Memory Stick media does not w ork.
, If you format your Memory Stick media using your computer,
further operation with your CLIÉ handheld is not guaranteed.
Format the Memory Stick using the CLIÉ handheld according to the
procedures in the Operating Instructions manual.
Cannot operate your CLIÉ handheld for a few seconds after inserting
the Memory Stick media.
, When you insert the Memory Stick media which has many audio
files recorded, you cannot operate your CLIÉ handheld for a few
seconds; this is not a malfunction.
Wait until the title of the audio file appears or the Memory Stick indicator
stops flashing.
35
|