SX-350
Easy-to-Use Wireless and Wired Networking
for OEM Printers
The SX-350 is an internal multiprotocol print server designed to allow
OEM printer manufacturers and printer controller manufacturers to
easily add wired and/or wireless network printing capabilities to their
products. It is a small board-level product that mounts inside the printer
and includes:
• Centronics/IEEE1284 parallel port (40-pin ribbon cable connector)
• 802.11a/b/g wireless radio module (wireless models only)
• RJ45 Ethernet jack (autosensing 100Base-T/10Base-T)
• RS-232 serial port (for console terminal configuration)
• 3 status LEDs
SX-350 OEM Internal
Print Server
• Complete internal OEM network
printing solution
• Pushbutton reset switch
The SX-350 is based on proven print server technology from
Silex Technology, Inc., the world’s leading manufacturer of OEM
print servers, so you can be assured of the highest quality and
maximum reliability.
• 802.11a/b/g wireless and
100Base-T/10Base-T Ethernet
• Works with all major operating systems
and network operating systems
• Minimal hardware and firmware
changes required in OEM printer
SX-350 Features and Benefits
FEATURE
BENEFIT
40-pin Centronics/IEEE 1284 parallel port
interface to printer
OEM can use standard cabling to connect
SX-350 with little or no hardware or firmware
modifications required in the printer
802.11a/b/g wireless radio model
Allows OEM to network portable printers and to
locate printers where cabling is difficult or
impossible
Compatibility with all major operating systems,
network operating systems, and printing
methods
OEM can sell his printers into virtually any type
of customer environment
JetAdmin and Web JetAdmin management
software support
Allows OEM printers to be managed by the
world’s most popular printer network
management software
Sophisticated security features, including
802.1X authentication, plus all major wireless
security protocols
Allows OEM to sell printers into virtually any
type of customer network
UART (RS-232) serial port
Provides a method for configuring the print
server without a network connection; can also
be used as an interface to the printer’s front
panel configuration subsystem
|