Sanyo Computer Monitor VMC 8618 User Guide

INSTRUCTION MANUAL  
VMC-8618  
VMC-8620  
Color Video Monitor  
CONTENTS  
INFORMATION TO USER . . . . . . . . . . . . . . . . . . . . . . 1  
PRECAUTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
BASIC OPERATION. . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
ADJUST THE OSD MENU ITEM . . . . . . . . . . . . . . . . . 7  
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . 9  
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
FEATURES  
About this manual  
Before installing and using this unit, please read this  
manual carefully. Be sure to keep it handy for later  
reference.  
Equipped with video and audio input terminals  
The video and audio input terminals (two systems for  
each input) allow bridge connections.  
This manual gives basic connections and operating  
instructions for 2 models.  
Equipped with Y/C input (S-VIDEO input) terminal  
This terminal is used to input Y/C separation signals  
(S-VIDEO signals).  
Eight languages OSD MENU  
ENGLISH, FRANCAIS, DEUTSCH, ESPAÑOL,  
ITALIANO, RUSSIAN, CHINESE, JAPANESE  
Horizontal resolution  
More than 800 TV lines (VMC-8618)  
More than 450 TV lines (VMC-8620)  
PAL/NTSC color system, selected automatically  
Built-in speaker  
Multi voltage (100 – 240 V)  
ACCESSORY  
AC power cord (Re-attachable)  
 
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS -- All the safety and operating  
instructions should be read before the appliance is operated.  
12. LIGHTNING -- For added protection for video monitor or  
equipment during a lightning storm, or when it is left  
unattended and unused for long periods of time, unplug it  
from the wall outlet and disconnect the antenna or cable  
system. This will prevent damage to the video product due  
to lightning and power-line surges.  
2. RETAIN INSTRUCTIONS -- The safety and operating  
instructions should be retained for future reference.  
3. CLEANING -- Unplug video monitor or equipment from the  
wall outlet before cleaning. Do not use liquid cleaners or  
aerosol cleaners. Use a damp cloth for cleaning.  
13. OVERLOADING -- Do not overload wall outlets and  
extension cords as this can result in a risk of fire or electric  
shock.  
4. ATTACHMENT -- Do not use attachments not  
recommended by the video monitor or equipment  
manufacturer as they may result in the risk of fire, electric  
shock or injury to persons.  
14. OBJECT AND LIQUID ENTRY -- Never push objects of any  
kind into video monitor or equipment through openings as  
they may touch dangerous voltage points or short-out parts  
that could result in a fire or electric shock. Never spill liquid  
of any kind on the product.  
5. WATER AND MOISTURE -- Do not use the video monitor  
or equipment near water -- for example, near a bathtub,  
washbowl, kitchen sink, laundry tub, in a wet basement, or  
near a swimming pool, or the like.  
15. SERVICING -- Do not attempt to service video monitor or  
equipment yourself as opening or removing covers may  
expose you to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
6. ACCESSORIES -- Do not place video monitor or equipment  
on an unstable cart, stand or table. The video monitor or  
equipment may fall, causing serious injury to a child or  
adult, and serious damage to the equipment. Wall or shelf  
mounting should follow the manufacturers instructions, and  
should use a mounting kit approved by the manufacturer.  
16. DAMAGE REQUIRING SERVICE -- Unplug video monitor  
or equipment from the wall outlet and refer servicing to  
qualified service personnel under the following conditions.  
A. When the power-supply cord or the plug has been  
damaged.  
6A. Video monitor or equipment and cart  
combinations should be moved with care. Quick  
stops, excessive force, and uneven surfaces may  
cause the equipment and cart combination to  
overturn.  
B. If liquid has spilled, or objects have fallen into the video  
product.  
C. If the video product has been exposed to rain or water.  
D. If the video product does not operate normally by  
following the operating instructions, adjust only those  
controls that are covered by the operating instructions as an  
improper adjustment of other controls may result in damage  
and will often require extensive work by a qualified  
technician to restore the video product to its normal  
operation.  
7. VENTILATION -- Slots and openings in the cabinet and the  
back or bottom are provided for ventilation, and to ensure  
reliable operation of the video monitor or equipment and to  
protect it from overheating. These openings must not be  
blocked or covered. The openings should never be blocked  
by placing the video monitor or equipment on a bed, sofa,  
rug, or other similar surface. Video monitor or equipment  
should never be placed near or over a radiator or heat  
register. Video monitor or equipment receiver should not be  
placed in a built-in installation such as a bookcase unless  
proper ventilation is provided.  
E. If the video product has been dropped, or the cabinet  
damaged.  
F. When the video product exhibits a distinct change in  
performance -- this indicates a need for service.  
8. POWER SOURCES -- Video monitor or equipment should  
be operated only from the type of power source indicated on  
the marking label. If you are not sure of the type of power  
supplied to your home, consult your video monitor or  
equipment dealer or local power company. For video  
monitor or equipment designed to operate from battery  
power refer to the operating instructions.  
17. REPLACEMENT PARTS -- When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or that  
have the same characteristics as the original parts.  
Unauthorized substitutions may result in fire, electric shock  
or other hazards.  
18. SAFETY CHECK -- Upon completion of any service or  
repairs to this video product, ask the service technician to  
perform safety checks to determine that the video product is  
in proper operating condition.  
9. GROUNDING OR POLARIZATION -- This product is  
equipped with a three-wire grounding-type plug, a plug  
having a third (grounding) pin. This plug will only fit into a  
grounding-type power outlet. This is a safety feature. If you  
are unable to insert the plug into the outlet, contact your  
electrician to replace your obsolete outlet. Do not defeat the  
safety purpose of the grounding-type plug.  
10. POWER CORDS -- Do not allow anything to rest on the  
power cord. Do not locate video monitor or equipment  
where the cord will be abused by persons walking on it.  
11. HEED WARNINGS -- Follow all instructions marked on the  
video monitor or equipment.  
2
 
PRECAUTION  
If an abnormality does occur, turn the power switch  
off and unplug the unit. Have a qualified technician  
perform any repairs.  
Cleaning  
Dirt can be removed from the cabinet by wiping it with  
a soft cloth. To remove stains, wipe with a soft cloth  
moistened with a soft detergent solution and wrung dry,  
then wipe dry with dry soft cloth.  
Do not use the monitor if it makes a strange noise,  
emits a strange odor, or if smoke comes out from it  
Do not use benzine, thinner or other chemical product  
on the cabinet, as that may cause deformation and  
paint peeling. Before using a chemical cloth, make sure  
to read all accompanying instructions. Make sure that  
no plastic or rubber material comes in contact with the  
cabinet for a long period of time, as that may cause  
damage or paint peeling.  
If used under these conditions, the monitor may cause a  
fire or electric shock. Immediately unplug it and wait to  
make sure no more smoke comes from it. Then take it to  
the dealer for service. Do not try to repair or open the  
monitor yourself.  
Do not allow the power cord to get damaged  
Do not place heavy objects on the power cord.  
SERVICE  
Do not place the power cord near a heat source.  
Do not excessively bend the power cord, modify it, or secure  
it with staples.  
This unit is a precision instruments and if treated with  
care, will provide years of satisfactory performance.  
However, in the event of a problem, the owner is advised  
not to attempt to make repairs or open the cabinet.  
Servicing should always be referred to your dealer or  
Sanyo Authorized Service Centre.  
Doing so may damage the power cord and cause a fire or  
electric shock.  
If the power cord is damaged, take it to the dealer and  
have it replaced.  
Do not allow dust or dirt to build up on the  
power cord or power outlet  
A build-up of dust may cause a short circuit or generate  
heat and cause a fire.  
Be especially careful when using the monitor in areas of  
high humidity, in areas with frequent condensation, in  
kitchens, and in places where there is excessive dust.  
Periodically unplug the power cord and clean away the  
dust that builds up between the plug terminals.  
Cautions when plugging in the power cord  
Make sure you insert the plug of the power cord all the  
way in the power outlet. Using the monitor with the  
power cord not fully plugged in may cause heat to  
generate and cause a fire.  
Do not use the monitor with the power cord wound or  
tied up. Heat may generate and cause a fire.  
When using an extension cord, be sure that the total  
current load of all equipment connected to it dose not  
exceed the specified ratings of the extension cord. If the  
rating are exceeded, heat may generate and cause a fire.  
Make sure to carefully read the specifications  
accompanying the extension cord.  
3
 
PARTS NAMES  
Front Panel  
Rear Panel  
1
2
3
4
2 4 5 6 7 8 9  
F
G
SCAN  
1
3
1 AC INPUT socket  
1 Speaker  
Connect the AC power cord (supplied) securely to this  
socket and to a wall outlet.  
When the monitor selector button (A, B or Y/C) is pressed,  
the speaker lets you hear the sound from the unit which is  
connected to the audio input terminals at the rear of the  
monitor.  
2 Rear A terminals (AUDIO/VIDEO A terminals)  
When the monitor A selector button at the front of the  
monitor is pressed, the audio and video signals from the unit  
which is connected to these terminals can be monitored.  
2 On-screen display button (OSD)  
When this button is pressed, the menu screen appears on  
the monitor screen.  
A AUDIO OUT/IN terminals  
3 Cursor (l) button (ã)  
B VIDEO OUT/IN terminals  
When this button is pressed, the cursor moves down. When  
it reaches the bottom, it reappears at the top. In addition, this  
button is used to make adjustment values smaller.  
3 Rear B terminals (AUDIO/VIDEO B terminals)  
When the monitor B selector button at the front of the  
monitor is pressed, the audio and video signals from the unit  
which is connected to these terminals can be monitored.  
4 Cursor (j) button (»)  
When this button is pressed, the cursor moves up. When it  
reaches the top, it reappears at the bottom. In addition, this  
button is used to make adjustment values larger.  
C AUDIO OUT/IN terminals  
D VIDEO OUT/IN terminals  
4 Rear Y/C terminals (AUDIO/VIDEO Y/C terminals)  
5 Display selector button (ENTER)  
When the monitor Y/C selector button at the front of the  
monitor is pressed, the audio and video signals from the unit  
which is connected to these terminals can be monitored.  
E AUDIO OUT/IN terminals  
F S-VIDEO OUT/IN terminals  
If this button is pressed while a picture is on the monitor screen,  
the screen changes to the adjustment screen. If the button is  
pressed once more, the picture returns to the previous screen.  
6 Underscan/overscan select button (SCAN)  
The initial setting is for the normal screen (overscan). If the  
SCAN button is pressed, the screen will become smaller  
(underscan) than the normal screen. Change this setting in  
cases such as when screen display characters are missing.  
If the SCAN button is pressed once more, the normal screen  
is displayed again.  
Note: If there is no signal being input from the input  
terminals selected (A, B or Y/C) at the rear of the  
monitor, “NO SIGNAL” will be displayed.  
7 Monitor A selector button (A)  
When this button is pressed, the audio and video input  
changes to the unit which is connected to the A terminals at  
the rear of the monitor.  
8 Monitor B selector button (B)  
When this button is pressed, the audio and video input  
changes to the unit which is connected to the B terminals at  
the rear of the monitor.  
9 Monitor Y/C selector button (Y/C)  
When this button is pressed, the audio and video input  
changes to the unit which is connected to the Y/C terminals  
at the rear of the monitor.  
F Power indicator (POWER)  
Lights when the power is on.  
G Power button (POWER)  
Press this button to turn the power on and off.  
4
 
CONNECTIONS  
Before making any connection, make sure all the devices are turned off.  
Before making the connections, please refer to the instruction manual accompanying each device. If the devices are not connected  
properly, that may cause a fire and/or damages.  
Basic connections  
Connections to the S-VIDEO terminals  
Monitor  
Video recorder  
: IN signal  
: OUT signal  
To Video  
input terminal  
To AUDIO  
input terminal  
To Audio input  
terminal  
To S-VIDEO input terminal  
To Video  
input terminal  
To Audio input  
terminal  
To AUDIO A  
INPUT terminal  
(Rear panel)  
To VIDEO A  
INPUT terminal  
To AUDIO  
input terminal  
To AUDIO B  
INPUT terminal  
To Y/C input terminal  
To VIDEO B  
INPUT terminal  
Video camera  
Video camera  
Monitor  
Monitor  
Video recorder  
Video recorder  
Note:  
The components and connection cables are not included and must be purchased separately.  
If connecting a single component, it can be connected to either the A or B terminals at the rear of the monitor.  
5
 
BASIC OPERATION  
3 Select the desired menu item and then press the  
1 Press the POWER button to turn on the  
ENTER button.  
power.  
If you press the ENTER button repeatedly while the  
menu screen is being displayed, the display will  
alternately change between the menu screen and the  
setting screen. At this time, the menu item will still be  
selected.  
ON: The power is turned on (the POWER indicator is lit).  
The signals from the channel (A, B or Y/C) which was  
being used when the power was last turned off will be  
input.  
OFF: The power is turned off (the POWER indicator is off).  
Note: If the power for the connected components is not  
turned on, or if a problem with operation has  
OSD  
ENTER  
occurred, VIDEO LOSSwill appear on the screen.  
If this happens, check the component concerned.  
2 Select the audio and video input.  
Use the monitor selector buttons (A or B) at the front of the  
monitor to select the picture being input to either the A or B  
terminals at the rear of the monitor.  
ENTER  
ENTER  
If using the S-VIDEO input terminal at the rear of the  
monitor, press the monitor Y/C selector button.  
Note: If there is no signal being input from the input  
terminals selected (A, B or Y/C) at the rear of the  
monitor, NO SIGNALwill be displayed.  
ENTER  
ENTER  
Normal picture  
3 Menu screen operations  
1 Press the OSD button.  
The menu screen will be displayed.  
The menu screen will only be displayed for about 13  
seconds.  
Note: During this operation, 9. TITLEand 10. VERSIONwill  
be skipped and the screen will go straight to EXT: OSD.  
2 Press the cursor (l) or (j) button.  
The cursor will move up or down, so that you can select  
the desired menu item.  
To return to the normal monitor screen  
Press the OSD button once more, or  
Select EXIT: OSDand then press the ENTER button.  
6
 
ADJUST THE OSD MENU ITEM  
Open the menu screen (press the OSD button), use the  
cursor buttons to select the desired menu item, and then  
press the ENTER button.  
CONTRAST adjustment  
1 Select “4. CONTRAST 75%” and then press the  
ENTER button.  
2 Use the cursor (l) and (j) buttons to adjust the  
contrast of the picture.  
OSD  
Note: The setting characters which are displayed on each  
adjustment screen (such as 50%) may not display  
correctly (dropout) in some cases.  
SHARPNESS adjustment  
1 Select “5. SHARPNESS 75%” and then press the  
COLOR adjustment  
ENTER button.  
1 Select “1. COLOR 50%” and then press the ENTER  
2 Use the cursor (l) and (j) buttons to adjust the  
button.  
sharpness of the picture.  
2 Use the cursor (l) and (j) buttons to adjust the  
color of the picture.  
OSD  
OSD  
VOLUME adjustment  
1 Select “6. VOLUME 50%” and then press the ENTER  
TINT adjustment  
button.  
1 Select “2. TINT 53%” and then press the ENTER  
2 Use the cursor (l) and (j) buttons to adjust the  
button.  
sound volume.  
2 Use the cursor (l) and (j) buttons to adjust the tint  
of the picture (NTSC only).  
OSD  
OSD  
Monitor switching time (dwell time) setting  
It is not available.  
BRIGHTNESS adjustment  
1 Select “3. BRIGHTNESS 75%” and then press the  
ENTER button.  
2 Use the cursor (l) and (j) buttons to adjust the  
brightness of the picture.  
OSD  
7
 
ADJUST THE OSD MENU ITEM  
2. Press the ENTER button, and then use the cursor l  
Menu screen language setting  
(j) button to select A.  
1 Select 8. LANGUAGEand then press the ENTER  
button.  
2 Use the cursor (l) and (j) buttons to select the  
display language.  
Only the menu screen and setting screen languages  
will be changed.  
OSD  
3. Press the ENTER button, and then use the cursor l  
(j) button to select B.  
4. Press the ENTER button, and then use the cursor l  
(j) button to select C.  
5. Press the ENTER button, and then use the cursor l  
(j) button to select D.  
Displaying characters such as for setting  
location on the monitor screen  
Note: If there is no signal being input from the input  
terminals selected (A, B or Y/C) at the rear of the  
monitor, the title cannot be set for those terminals.  
1 Select 9. TITLE ONand then press the ENTER  
button.  
6. Press the OSD button.  
The cursor will move to the next monitor display.  
OSD  
The settings for the CH A and CH Y/C monitors can  
be carried out by the same procedure as described  
above.  
3 Use the cursor l (j) button to select TITLE ON,  
and then press the ENTER button.  
The text that has been set for that monitor screen will  
then be displayed.  
2 To display ABCDon the CH B monitor as an  
example:  
A maximum of eight characters can be displayed on the  
screen.  
Note: The setting screen will disappear after  
approximately 13 seconds of no activity.  
1. Use the cursor (l) button to select CH B.  
8
 
TROUBLESHOOTING  
Solutions to common problems related to your monitor are describe here. If none of the solutions presented here solve the problem,  
unplug the monitor and consult a SANYO-authorized dealer or service center for assistance.  
Problems  
Points to be checked  
Measures (Remedy)  
Page  
5
No picture with  
the power on  
Is the video signal being output from the  
connected component?  
Set the connected component correctly.  
Is the input signal selected properly?  
Select the required video signal input  
with the monitor selector buttons. (A, B  
and Y/C)  
3
5
No sound.  
Is the audio signal being output from the  
connected component?  
Set the connected component correctly.  
Is the volume set to the minimum level?  
Adjust the volume using the VOLUME  
setting screen.  
7
5
Is the audio cable disconnected?  
Securely connect the audio cable.  
Shaking picture  
Is the monitor close to a device which is  
generating a strong magnetic field?  
Move the device away from the monitor  
until the picture stabilizes.  
No color, color is  
incorrect or  
picture is too  
dark  
Have the picture control settings  
(CONTRAST, BRIGHTNESS, TINT)  
been changed?  
Adjust the settings using the adjustment  
screens.  
7
Uneven or  
Are there any speakers or magnets  
nearby, or were they brought close to the  
monitor?  
Move the speaker or magnet away from  
the monitor, and then turn the power off  
and wait at least 30 minutes before  
turning the power back on again.  
mismatched  
color in parts of  
the picture  
9
 
SPECIFICATIONS  
VMC-8618  
VMC-8620  
Color system  
PAL/NTSC, selected automatically  
Picture tube  
18 inch  
20 inch  
Resolution  
More than 800 TV lines  
More than 450 TV lines  
Input terminals  
S-VIDEO signal (VIDEO C)  
Separate Y/C signal, mini-DIN connector (1)  
Y signal: 1.0 Vp-p, 75 negative sync  
C signal: 0.286 Vp-p, 75 negative sync, bridge connection possible  
Video signal (VIDEO A, B)  
Audio signal (AUDIO A, B)  
Output terminals  
Composite sync signal, 1.0 Vp-p, 75 BNC connector (2)  
6 dBs (400 mVrms), RCA pin (3), bridge connection possible  
S-VIDEO signal (VIDEO C)  
Separate Y/C signal, mini-DIN connector (1)  
Y signal: 1.0 Vp-p, 75 negative sync  
C signal: 0.286 Vp-p, 75 negative sync, bridge connection possible  
Video signal (VIDEO A, B)  
Audio signal (AUDIO A, B)  
Menu screen items  
Composite sync signal, 1.0 Vp-p, 75 BNC connector (2), automatic termination setting  
6 dBs (400 mVrms), RCA pin (3), bridge connection possible  
Picture adjustment  
Adjustable COLOR, TINT (NTSC only), BRIGHTNESS, CONTRAST, SHARPNESS  
Adjustable speaker volume  
Sound adjustment  
Language setting  
Eight languages (English, Francais, Deutsch, Espanol, Italiano, Russian Chinese and  
Japanese)  
Title setting  
Title entry up to [eight] alphanumeric characters  
Overscan or underscan selection  
Speaker  
YES  
x1, impedance of 8 Ω  
1 W  
Audio output  
Power source  
100 ~ 240 V AC, 50/60 Hz  
95 W  
Power consumption  
Ambient operating temperature  
Ambient operating humidity  
Dimensions (W x H x D)  
Weight  
10 ~ +45°C, storage temperature  
10 ~ 90%  
448 x 433 x 447 mm  
25 kg  
492 x 474 x 482 mm  
29 kg  
Accessory  
AC power cord x1  
Diagrams are shown for explanatory purposes only, and have been exaggerated, abbreviated or created as required, and so may  
differ from the actual product.  
Features and specifications are subject to change without prior notice or obligations.  
Dimensions  
D
W
Y/C (Mini DIN 4 pin) terminal specification  
OUT  
Pin No.  
1
Signal  
GND (Y)  
GND (C)  
Y
4
3
2
4
1
3
H
2
2
1
3
IN  
4
C
10  
 
SANYO INDUSTRIAL VIDEO  
VIDEO MONITOR LIMITED WARRANTY  
OBLIGATIONS  
In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense,  
unless specifically stated otherwise in this warranty. The names and addresses of Authorized Sanyo Service Centers may be obtained by calling the  
toll-free number listed below.  
For product operation, authorized service center referral, service assistance or problem resolution, call  
CUSTOMER INFORMATION 1-800-421-5013  
Weekdays 8:30 AM – 5:00 PM Pacific Time  
For accessories and/or parts, call  
PARTS ORDER INFORMATION 1-800-726-9662  
Weekdays 8:30 AM – 5:00 PM Pacific Time  
THIS WARRANTY IS VALID ONLY ON SANYO PRODUCTS PURCHASED OR RENTED IN THE UNITED STATES OF AMERICA, EXCLUDING ALL  
U.S. TERRITORIES AND PROTECTORATES. THIS WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER OR END-USER. THE  
ORIGINAL DATED BILL OF SALE, SALES SLIP OR RENTAL AGREEMENT MUST BE SUBMITTED TO THE AUTHORIZED SANYO SERVICE  
CENTER AT THE TIME WARRANTY SERVICE IS REQUESTED.  
Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO Fisher Company warrants this SANYO product against defects in materials  
and workmanship for the periods specified below. SFC will repair or replace (at its option) the product and any of its parts which fail to conform to this  
warranty. The warranty period commences on the date the product was first purchased or rented at retail.  
LABOR  
1 YEAR  
PARTS  
1 YEAR  
PICTURE TUBE  
1 YEAR  
EXCLUSIONS  
This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instruction manual, or (B) the  
repair of any product whose serial number has been altered, defaced or removed.  
This warranty shall not apply to the cabinet or cosmetic parts, batteries or routine maintenance.  
This warranty does not apply to uncrating, setup, installation, removal of the product for repair or reinstallation of the product after repair.  
This warranty does not apply to repairs or replacements necessitated by any cause beyond the control of SFC including, but not limited to, any  
malfunction, defect or failure caused by or resulting from unauthorized service or parts, improper maintenance, operation contrary to furnished  
instructions, shipping or transit accidents, modification or repair by the user, abuse, misuse, neglect, accident, incorrect power line voltage, fire, flood or  
other Acts of God, or normal wear and tear.  
The foregoing is in lieu of all other expressed warranties and SFC does not assume or authorize any party to assume for it any other obligation or  
liability.  
SFC DISCLAIMS ALL OTHER WARRANTIES EXPRESS OR IMPLIED, WITH REGARD TO THIS PRODUCT (INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS). IN NO EVENT SHALL SFC BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES  
ARISING FROM THE OWNERSHIP OR USE OF THIS PRODUCT OR FOR ANY DELAY IN THE PERFORMANCE OF ITS OBLIGATIONS UNDER  
THIS WARRANTY DUE TO CAUSES BEYOND ITS CONTROL. SFC’S LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM  
ANY CAUSE WHATSOEVER, ARISING OUT OF OR IN CONNECTION WITH THE SALE, USE OR OWNERSHIP OF THIS PRODUCT INCLUDING  
WARRANTOR’S NEGLIGENCE, ALLEGED DAMAGED OR DEFECTIIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR  
LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCT.  
ATTENTION  
For your protection in the event of theft or loss of this product, please fill in the information below for you own personal records.  
Model No.  
_____________________________________________  
Serial No.  
______________________________________________  
(Located on back or bottom side of unit.)  
Date of Purchase  
Where Purchased  
_______________________________________  
_______________________________________  
Purchase Price  
_________________________________________  
Printed on recycled paper  
SANYO Electric Co., Ltd.  
1AC6P1P2709--  
L8MV5/US--2, L8MZ5/US--2 (0503KP-TVS)  
312-0219-101  
Printed in Taiwan  
 

Pyramid Technologies Clock Wood Series User Guide
RIDGID Impact Driver R82320 User Guide
Rosewill Server RSV R4000 User Guide
Safety 1st Baby Accessories 48400 User Guide
Samsung Blu ray Player BD F5500K User Guide
Samsung Microwave Oven MD800 User Guide
Sanyo Microwave Oven EM S7595S User Guide
Savin Printer SDC103 User Guide
Scientific Atlanta DVR 8300 User Guide
Sealife Digital Camera DC1400 User Guide