Samsung Speaker System MXFS9000ZA User Guide

MX-FS9000  
PREMIUM HI-FI Component System  
MP3/WMA/CD-DA Playback with CD/USB  
user's manual  
Imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
 
Important Information on Use  
Disc Storage  
Precautions  
Ensure that the AC power supply in your house complies  
with the identification sticker located on the back of your  
product.  
Install your product horizontally, on a suitable base (furniture),  
with enough space around it for ventilation (7.5~10cm).  
Do not place the product on amplifiers or other equipment  
which may become hot. Make sure the ventilation slots are  
not covered.  
Do not stack anything on top of the product.  
Before moving the product, ensure the Disc Insert Slot is  
empty.  
To turn off the product completely, disconnect the AC plug from  
the wall outlet. Disconnect the AC plug from the wall outlet if  
you will leave the device unused for a long period of time.  
During thunderstorms, disconnect the AC plug from the wall  
outlet. Voltage peaks due to lightning could damage the  
product.  
Do not expose the product to direct sunlight or other heat  
sources. This could cause the product to overheat and  
malfunction.  
Do not keep in direct sunlight.  
Keep in a cool ventilated area.  
Keep in a clean protective jacket.  
Store vertically.  
Do not allow the discs to become contaminated with dirt.  
Do not load cracked or scratched discs.  
Handling and Storing Discs  
If you get fingerprints or dirt on a disc, clean it with a mild  
detergent diluted in water and wipe with a soft cloth.  
When cleaning, wipe gently from the inside to the outside of  
the disc  
Condensation may form if warm air comes into contact  
with cold parts inside the product. When condensation  
forms inside the product, it may not operate correctly. If this  
occurs, remove the disc and let the product stand for 1 or  
2 hours with the power on.  
Protect the product from moisture, and excess heat or  
equipment creating strong magnetic or electric fields (i.e.  
speakers.).  
Disconnect the power cable from the AC supply if the  
product malfunctions.  
Disc Types And Disc Format  
This product does not support Secure (DRM) Media files.  
CD-R Discs  
Your product is not intended for industrial use. It is for  
personal use only.  
Some CD-R discs may not be playable depending on  
the disc recording device (CD-Recorder or PC) and the  
condition of the disc.  
Use 650MB/74 minute CD-R discs.  
Do not use CD-R discs over 700MB/80 minutes as they  
may not be played back.  
Some CD-RW (Rewritable) media may not be playable.  
Only CD-Rs that are properly "closed" can be fully played. If  
the session is closed, but the disc is left open, you may not  
be able to fully play the disc.  
Condensation may occur if your product or disc has been  
stored in cold temperatures. If transporting the product  
during the winter, wait approximately 2 hours until the  
product has reached room temperature before using.  
The batteries used with this product contain chemicals  
that are harmful to the environment. Do not dispose of  
batteries in the general household trash.  
Maintain an open space of approximately 6 inches (15 cm)  
on the sides and rear of the system, for ventilation purposes.  
Place the loudspeakers at a reasonable distance on either  
side of the system to ensure good stereo sound.  
Direct the loudspeakers towards the listening area.  
CD-R MP3/WMA Discs  
Only CD-R discs with MP3 files in ISO 9660 or Joliet format  
can be played.  
MP3 file names should contain no blank spaces or special  
characters (. / = +).  
Use discs recorded with a compression/decompression  
data rate greater than 128Kbps.  
Only files with the ".mp3" and ".wma" extensions can be  
played.  
Only a consecutively written multisession disc can be  
played. If there is a blank segment in the Multisession disc,  
the disc can be played only up to the blank segment.  
If the disc is not closed, it will take longer to begin playback  
and not all of the recorded files may play.  
For files encoded in Variable Bit Rate (VBR) format, i.e. files  
encoded in both low bit rate and high bit rate (e.g., 32Kbps  
~ 320Kbps), the sound may skip during playback.  
A maximum of 999 files can be played per CD.  
Supported Audio Formats (Bit Rate):WMA 56~128kbps,  
MP3 80~320kbps  
Cautions On Handling And Storing Discs  
Small scratches on the disc may reduce sound and picture  
quality or cause skipping.  
Be especially careful not to scratch discs when handling  
them.  
Holding Discs  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not get  
on the surface.  
Do not stick paper or tape on the disc.  
English  
3
 
Contents  
Contents  
Thank you for buying this SAMSUNG Hi-Fi-Component system.  
Please take time to read these instructions.  
They will allow you to operate your system with ease and take full advantage of its features.  
Safety Warnings................................................. 2  
Move FOLDER ......................................12  
How to safely remove the USB device...... 12  
Read Before Using the USB Storage  
Important Information On Use .......................... 3  
Precautions.................................................... 3  
Cautions On Handling And Storing Discs  
Devices..................................................12  
Bluetooth.....................................................12  
What is Bluetooth?................................12  
To connect the Hi-Fi Component to a  
...................................................................... 3  
Disc Types And Disc Format.......................... 3  
Accessories........................................................ 4  
Bluetooth device....................................12  
To disconnect the Bluetooth device from  
Hi-Fi Component...................................13  
To disconnect the Hi-Fi Component  
Description ......................................................... 5  
Front Panel .................................................... 5  
Rear Panel..................................................... 6  
Remote Control ............................................. 7  
Installing Batteries In The Remote  
from the Bluetooth device......................13  
Using My Karaoke .......................................13  
10 Skip Function..........................................14  
Auto Change Function.................................14  
Listening to the Radio..................................14  
To Store the Stations You Want.............14  
Selecting a Stored Station.....................14  
Control .................................................... 7  
Connecting the Speakers .............................. 8  
Attacking the speaker feet ............................. 8  
Basic Functions ................................................. 9  
The Display function....................................... 9  
Playing CDs................................................... 9  
Loading a Compact Disc......................... 9  
CD/MP3/WMA-CD Playback .................. 9  
Selecting a Track...................................10  
Searching for a Track/Folder Quickly .....10  
Searching for a Specific Music Passage  
on a CD.................................................10  
Repeat One or All Tracks on a CD.........10  
A-B Repeat Playback............................10  
CD Programming ..................................10  
Viewing or Editing the Programmed  
Advanced Functions........................................15  
Timer Function.............................................15  
Setting the Clock...................................15  
Setting the Timer...................................15  
Cancelling the Timer..............................16  
The Recording Function...............................16  
Basic Recording....................................16  
Recording Speed ..................................17  
Special Sound Effect....................................17  
Selecting EQ Mode ...............................17  
Using the FOOTBALL Mode..................17  
GIGA SOUND Function.........................17  
BEAT WAVING Function........................18  
DJ BEAT Function .................................18  
Track .....................................................11  
Playing USB Devices ...................................11  
Before you begin! ..................................11  
To Select a File from a USB Device........11  
To Use High Speed Search ...................11  
To Delete a File......................................11  
To Skip Next 10 Files.............................12  
Troubleshooting ...............................................19  
Specifications ..................................................20  
Symbols  
Important  
Note  
Accessories  
Check for the supplied accessories below.  
USB  
CD/  
AH59-02553A  
User's Manual  
Remote Control/ Batteries  
FM Antenna  
Power Cable  
FOOT Rubber  
(AH68-02612A)  
(AH59-02553A/4301-000116)  
(AH42-00021A)  
(3903-000467)  
(AH81-05916L)  
Figures and illustrations in this User's Manual are provided for reference only and may differ from actual product  
4 appearance.  
English  
 
Description  
Front Panel  
10  
1
2
3
4
5
6
7
8
9
11  
12  
13  
14  
15  
16  
33  
32  
31  
17  
30 29 28 27 26 25 24 23 22 21  
20  
19  
18  
1. DELETE button  
20. REMOTE CONTROL SENSOR  
21. BACKWARD SEARCH/SKIP button  
22. AUX IN 1 jack  
2. EASY SEARCHING JOG  
3. DISPLAY/ DEMO button  
4. STOP button  
Connecting an external device such as an MP3  
player.  
5. CD/ Bluetooth button  
Connect AUX IN 1 on the front panel of the  
product to the Audio Out of the external  
device/MP3 player.  
6. Display Panel  
7. PLAY/PAUSE button  
8. TUNER/AUX button  
Press the TUNER/AUX button to select the  
AUX1.  
9. +PANNING button for DJ BEAT sound effect  
10. MASTER VOLUME/DJ JOG control  
11. CHORUS button for DJ BEAT sound effect  
12. BEAT WAVING button  
13. POWER button  
23. MIC jack  
24. ENTER button  
25. USB 2 SELECT button  
26. USB 2 jack for Playing and USB Recording  
27. USB REC button  
Press this button to switch your product on or  
off.  
28. USB 1 jack for only Playback  
29. USB 1 SELECT button  
30. RETURN button  
14. EJECT button  
15. FLANGER button for DJ BEAT sound effect  
16. DJ BEAT button  
31. FOOTBALL MODE button  
32. GIGA SOUND BEAT button  
33. EQ button  
17. DISC slot  
18. WAHWAH button for DJ BEAT sound effect  
19. FORWARD SEARCH/SKIP button  
English  
5
 
Description  
Rear Panel  
7
6
1
2
3
4
5
1. FM Antenna Connector Terminal  
4. LED Terminals for Speaker Beat Waving.  
Connect the FM antenna to the FM antenna con-  
nector terminal.  
1.  
5. 2.2 CH Speaker Terminals  
To achieve the correct sound quality, when you con-  
nect the speakers, match the color of the speaker  
plugs to the color of the speaker jacks. See below.  
1.  
Slowly move the antenna wire until you find a  
location where reception is good, then fasten it to  
a wall or other rigid surface.  
2.  
L
LEFT channel (marked , White/Purple).  
If reception is poor, you may need to install an  
outdoor antenna. To do so, connect an outdoor  
FM antenna to the FM antenna connector terminal  
of the product using a 75Ω coaxial cable (not  
supplied).  
3.  
R
RIGHT channel (marked , Red/Purple).  
Don't force the Purple SUBWOOFER connector  
into the White or Red speaker jack.  
6. POWER  
Insert only the provided power cable.  
2. ONLY FOR SERVICE  
This jack is just for testing. Do not use.  
7. Cooling fan  
The fan operates while the unit is powered on.  
3. AUX IN 2 Terminals  
Use an Audio Cable (not supplied) to connect AUX  
If you set the unit to the minimum volume, the fan  
won't operate.  
Provide a minimum of 6 inches (15 cm) of clear  
space in front of the fan when you install the  
product.  
1.  
IN 2 on the product to Audio Out on an external  
analog output device.  
Be sure to match connector colors.  
If the external analog output device has only one  
Audio Out jack, connect either left or right.  
Press the TUNER/AUX button to select the AUX 2.  
If no button actions for more than 8 hours in AUX  
mode, the power will automatically turn off.  
6
English  
 
Description  
Remote Control  
1. POWER  
2. TUNER/AUX  
3. USB  
17. MY KARAOKE  
18. MIC VOLUME -, +  
19. USB REC  
30  
29  
1
USB  
CD/  
4. Number(0~9) button  
During playback, press the  
desired track number. The  
selected track is played.  
20. DELETE  
2
3
28  
21. Mono/Stereo for FM, CD  
REC SPEED for CD  
Ripping  
4
5. SKIP (-10, +10)  
6. SKIP  
22. TUNING/ALBUM ,,.  
23. EQ  
7. STOP  
8. PLAY  
9. REPEAT  
10. GIGA  
24. AUTO CHANGE  
25. REPEAT A-B  
26. PAUSE  
5
6
27  
26  
7
8
9
10  
11  
12  
27. SEARCH  
28. CD/Bluetooth  
29. BEAT WAVING  
30. MUTE  
11. ENTER  
25  
24  
23  
12. VOLUME (-,+)  
13. TUNING MODE  
14. TIMER ON/OFF  
15. TIMER SET  
16. SLEEP  
Turn off the sound  
temporarily. Press again to  
turn the sound back on.  
22  
13  
21  
20  
19  
Set a sleep time to shut  
off the product.  
14  
15  
16  
17  
18  
AH59-02553A  
Installing Batteries In The Remote Control  
`
Place batteries in the remote control so they match the polarity : (+) to (+) and  
(–) to (–).  
`
`
`
Always replace both batteries at the same time.  
Do not expose the batteries to heat or a flame.  
The remote control can be used up to  
approximately 23 feet (7 meters) in a straight line from the system.  
* Battery size: AAA  
English  
7
 
Description  
Connecting the Speakers  
Recommended speaker setup.  
The product may not operate properly if not installed in accordance with recommended speaker  
setup, or exposed to shaking or external shocks.  
Do not stretch the speaker wires or place a heavy object on them.  
Attaching the speaker feet  
Attach the supplied speaker feet to the bottom rear corner of each speaker to stabilize the speakers  
and to prevent them from slipping.  
FOOT Rubber  
8
English  
 
Basic Functions  
The Display function  
CD/MP3/WMA-CD Playback  
This product is designed to play the following audio  
You can view all functions available on the dis-  
play, adjust the brightness of the display and set  
the Display/LED either on or off.  
disc types: CD, CD-R, CD-RW, MP3/WMA-CD.  
1. Insert a disc gently into the disc slot with the disc's  
Each time you press the DISPLAY/DEMO button,  
the display mode will change as follows:  
label facing up.  
2. The disc will be played automatically.  
The Dimmer function  
For MP3/WMA-CD audio, it may take several minutes  
for the product to finish scanning the disc tracks.  
The Dimmer function is selected and the display dark-  
ens.  
If you play a file with an English name or an MP3/  
WMA-CD file with an English title, the song title will be  
shown in the display. (Titles in other languages will not  
be displayed.)  
LED OFF  
The LED is turned off while the dimmer function is work-  
ing.  
Clock ON  
The clock you set is displayed.  
Display/LED ON  
An English-titled track containing a special character  
will not be displayed.  
<CD Playback Display>  
All displays and the LED are turned on.  
Track Indicator  
Playtime Indicator  
The DEMO function  
Press DISPLAY/DEMO button for 5 seconds to oper-  
ate the demo mode.  
When you press the DISPLAY/DEMO button while  
displaying the demo, the function operates as follows:  
3. To adjust the volume:  
Turn the VOLUME control on the product.  
Press the VOL + or VOL - button of the remote  
control.  
The volume level can be adjust in 31 steps (VOLUME  
MIN, VOLUME01~ VOLUME 29, and VOLUME MAX).  
DIMMER  
LED Off (unit/speaker)  
[time dis-  
--:--  
play]  
LED On (unit/speaker)  
-
To cancel the Demo mode  
4. Main Unit  
To pause playback temporarily, press the p button.  
Press the DISPLAY/DEMO again for 5 seconds. The  
Press p again to continue playing the disc.  
current mode is canceled and the product is turned off.  
Press the TUNER/AUX, CD/Bluetooth or USB  
button. The current mode is canceled and the mode  
is changed to the mode you selected.  
Remote control  
To pause playback temporarily, press the PAUSE(#) but-  
ton.  
- While displaying DEMO, only the [Power], VOL  
buttons and the buttons mentioned  
- If you connect speaker to AUX1 while displaying  
DEMO, sound is produced through AUX1 and you  
Press the PLAY (+) button to continue playing the disc.  
above work.  
5. To end playing, press the STOP (@) button.  
If no CD is in the disc slot, “NO DISC” appears on the  
display.  
can use the VOL buttons and  
[MUTE].  
The quality of MP3/WMA-CD playback may vary  
depending on the condition of the disc or the condition of  
the recorder with which the disc was created.  
Playing CDs  
Loading a Compact Disc  
If a disc contains different types of files or unnecessary  
folders, you will have problems with playback.  
You can play standard CDs that require no adapter.  
Gently insert a CD into the disc slot. Do not apply  
excessive force.  
1. Insert a disc gently into the disc slot with the disc's  
label facing up. The disc will be played automatically.  
Do not apply force to the product or place a heavy object  
on the product.  
You can load or unload compact discs when the  
radio, USB or auxiliary source function is selected.  
When you press the EJECT button, all of the other  
functions will change to the CD mode.  
If no buttons are pressed on the product or remote  
control for more than 3 minutes when the product is  
in Pause mode, it will change to Stop mode.  
Do not insert an out-of-spec or oddly shaped CD (heart  
shaped, octangular, etc.). You can damage the product.  
Carefully maintain your CDs.  
If no buttons are pressed on the product or remote  
control for more than 25 minutes when the product  
is in Stop mode, the product will turn off.  
English  
9
 
Basic Functions  
Selecting a Track  
1. Press the REPEAT button on the remote  
control.  
You can select a desired track while the disc is  
Each time you press the REPEAT button, the  
repeat mode will change as follows:  
being played  
.
To play the previous track  
MP3: OFF TRACK DIR ALL RANDOM  
Press the [ button within 3 seconds after the current  
track has started playing.  
CD: OFF TRACK ALL RANDOM  
2. When you want to stop the repeat function,  
press the REPEAT button until "OFF" is  
displayed.  
Press the [ button twice at least 3 seconds after the  
current track has started playing.  
To play the next track  
OFF: Cancels repeat playback.  
]
Press the  
button.  
TRACK: Repeatedly plays the selected track.  
DIR (DIRECTORY): Repeatedly plays all tracks  
in the selected directory.  
To play the current track from the beginning  
Press the [ button 3 seconds after the current track  
track has started playing.  
ALL: Repeatedly plays the entire disc.  
RANDOM: Plays tracks in random order.  
To play the track of your choice  
[
]
Press the  
or  
button to move to a desired track.  
A-B Repeat Playback  
You can also  
use the number ( 0~9 ) buttons on  
the remote control to select a track.  
You can repeatedly play back a designated  
section of a CD.  
Searching for a Track/Folder Quickly  
You can select a track/folder directly without  
1. Press the REPEAT A-B button at the beginning  
of desired part.  
'RPT A' will be displayed.  
2. Press the REPEAT A-B button at the ending of  
desired part.  
'RPT AB' will be displayed.  
3. To cancel REPEAT A-B function, press the  
REPEAT A-B button again.  
the [  
] buttons.  
,
CDDA/MP3-CD/WMA-CD  
1. Turn the EASY SEARCHING JOG on the product  
to the left or right to select a desired track.  
You can move to the selected track directly.  
2. When searching is done, the track will automatically  
'OFF' will be displayed.  
start playing.  
The REPEAT A-B function is available within a  
track.  
Searching for a Specific Music Passage on  
a CD  
CD Programming  
When listening to a CD, you can quickly search  
for a specific music passage on a track.  
This function is not available during playback of an  
MP3/WMA-CD.  
You can program the playback order of up to 24  
tracks of your choice.  
However, you must stop playing the CD before  
selecting tracks.  
Forward Search............................  
Backward Search .........................  
)
(
You can also press and hold the  
the product to automatically scan for a track.  
[
,
]
buttons on  
1. While in CD playback mode, press the STOP  
(@) button to stop playing the CD.  
Repeat One or All Tracks on a CD  
2. Press the ENTER  
(
)
button to display the  
You can repeatedly play a track, a group of  
tracks, or an entire CD.  
message below:  
(01= program number, ---= track number)  
10  
English  
 
Basic functions  
2. Select the USB mode by pressing the USB 1 or USB 2  
button on the product or the USB button on the remote  
control.  
3. Use the  
[
or  
]
button to move to a desired  
track.  
Press  
Press  
[
]
to move to the previous track.  
to move to the next track.  
3. The first file of the first directory plays automatically  
.
4. To stop playing  
4. Press the ENTER  
(
)
button to confirm your  
Press the STOP (  
@
) button to stop playing.  
selection. The selection is stored and  
is displayed.  
To remove the USB device  
If you press the STOP ( @ ) button once  
again, you can remove the USB device safely.  
5. To select another track, follow Steps 3 and 4  
above.  
Do not connect a USB recharger to the USB port  
of this product. You can damage the product.  
6. Press the PLAY (+) button to play the  
programmed tracks.  
To Select a File from a USB Device  
7. Press the STOP (@) button to stop playing the  
programmed tracks, Press the STOP (@) button  
again to cancel playing the programmed tracks.  
You can select an MP3 file while the product is  
playing.  
If you want to move to the previous/next track, press  
the [,] buttons briefly.  
If you eject the disc or turn off the product  
or change other function mode, your  
programming will be canceled.  
The unit moves to the previous/next file within the  
directory.  
If you press the [,] buttons more times than the  
number of the files in the directory, the unit moves to  
the next directory.  
Viewing or Editing the Programmed Track  
You can view a list of programmed tracks and  
edit them as you want.  
To repeat  
1. Press the REPEAT button.  
1. If a programmed track is being played, press  
Each time you press the REPEAT button, the repeat  
mode will change as follows::  
OFF TRACK DIR ALL RANDOM  
the STOP (@) button once.  
2. Press the ENTER  
(
)
button twice to display  
2. When you want to stop the repeat function, press the  
the message below:  
REPEAT button until "OFF" is displayed.  
OFF: Cancels repeat playback.  
TRACK: Repeatedly plays the selected file.  
DIR(DIRECTORY): Repeatedly plays all files in the  
selected folder.  
(01= program number, 002= track number)  
3. Repeatedly press the ENTER  
(
)
button until  
the desired track is displayed.  
ALL: Repeatedly plays all files.  
4. Press the  
[
or  
]
button to select a different  
button to confirm your  
RANDOM: Plays files in random order.  
track.  
To Use High Speed Search  
5. Press the ENTER  
(
)
selection.  
You can search the desired section quickly while  
the product is playing.  
6. To play the programmed tracks, press the Play  
) button.  
1. Press the  
,
button.  
( )  
(+  
Each time you press the button, you will move  
forward/backward fast.  
Playing USB Devices  
Sound does not output during a high speed search.  
Connect an external storage device such as a USB  
flash memory or external HDD (Hard Disk Drive) to  
the product. You can play files in MP3/WMA format.  
To Delete a File  
You can delete a file from your USB device.  
Select a file you want to delete.  
1.  
2.  
3.  
Before you begin!  
Press the DELETE button.  
1. Connect the external USB storage device to your  
Press the [,  
] buttons on the product or remote  
control to select YES/NO.  
product.  
To cancel the selection, press the RETURN button on  
the product.  
English  
11  
 
Basic Functions  
Press the ENTER button on the remote control.  
The selected file will be deleted.  
4.  
Bluetooth  
You can use a Bluetooth device to enjoy music with  
high quality stereo sound, all without wires!  
The NTFS file system is not supported.  
To Skip Next 10 Files  
What is Bluetooth?  
1. Press the +10 or -10 button while in playback mode.  
The unit will skip as many as 10 tracks forward or 10  
tracks back from the current track.  
Bluetooth is a technology that enables Bluetooth  
compliant devices to interconnect easily with each  
other using a short wireless connection.  
Move FOLDER  
A Bluetooth device may cause noise or malfunction,  
depending on usage, when:  
Press the remote control's TUNING/ALBUM  
to move to the previous/next folder.  
,
,
.
button  
-
A part of your body is in contact with the receiving/  
transmitting system of the Bluetooth device or the Hi-Fi  
Component.  
How to safely remove the USB device  
-
-
It is subject to electrical variation from obstructions  
caused by a wall, corner, or office partitioning.  
It is exposed to electrical interference from same  
frequency-band devices including medical equipment,  
microwave ovens, and wireless LANs.  
1. Press the (  
@
) button twice while the USB is playing or  
press the (  
@
) button once when play is stopped.  
2. When the REMOVE message appears on the display,  
remove the USB device.  
Pair the Hi-Fi Component with the Bluetooth device while  
they are close together.  
The greater the distance between the Hi-Fi Component and  
the Bluetooth device, the worse the quality. If the distance  
exceeds the Bluetooth operational range, the connection is  
lost.  
Read Before Using the USB Storage Devices  
Some USB devices may not work properly with this  
product.  
This product only supports external HDD's that are  
formatted in the FAT file system.  
USB 2.0 HDDs should be connected to a separate power  
source. Otherwise, the USB 2.0 HDDs will not work.  
If multiple USB external storage devices are connected  
together, only the MP3 files in the first HDD will be played.  
Files with DRM are not supported. Digital Right  
Management (DRM) restricts unauthorized access to a  
DRM file so that the copyright of the file is protected from  
piracy.  
In poor reception-sensitivity areas, the Bluetooth connection  
may not work properly.  
The Bluetooth connection only works when it is close to  
the set. The connection will be automatically cut off if the  
Bluetooth device is out of range. Even within range, the  
sound quality may be degraded by obstacles such as walls  
or doors.  
This wireless device may cause electric interference during  
its operation.  
Even if a file has an .mp3 extension, the file cannot be  
played if it is formatted in MPEG layer 1 or 2.  
Do not use an unrecognized USB hub.  
Only the first 15 characters of a MP3/WMA file are  
displayed.  
Only removable HDDs with less than 160GB are supported.  
Depending on the device, a 160GB- or more removable  
HDD may not be supported.  
It can take several minutes for the product to recognize the  
files on some USB devices.  
Some USB devices (USB HDDs, in particular) may cause a  
delay when moving from track to track.  
With USB storage devices supporting USB VER1.1 only,  
the product may access files slowly or may not recognize  
file properties.  
The maximum electrical current supported by external USB  
devices via each USB port is 0.5A (based on DC 5V).  
A certain USB, digital camera device, USB card reader,  
iPod, iPhone or Smart Phone may not be supported.  
To connect the Hi-Fi Component to a  
Bluetooth device  
Before you begin, confirm that your Bluetooth  
device supports the Bluetooth-compliant stereo  
headset function.  
Press the CD/ Bluetooth button of the Hi-Fi Component  
to display the BLUETOOTH message.  
1.  
You will see WAIT for a while and then READY on the  
front display of the Hi-Fi Component.  
Select the Bluetooth menu on the Bluetooth device you  
want to connect. (Refer to the Bluetooth device's user  
manual.)  
2.  
Select the Stereo headset menu on the Bluetooth device.  
3.  
4.  
You will see a list of scanned devices.  
Select "[Samsung] HI-FI XXXXXX" from the list.  
When the product is connected to the Bluetooth  
device,it will display CONNECTED  
BLUETOOTH  
on the front display.  
12  
English  
 
Basic functions  
If the Bluetooth device has failed pair with the product,  
delete the previous “[Samsung] HI-FI XXXXXX” found by  
the Bluetooth device and have it search for the product  
again.  
To disconnect the Hi-Fi Component  
from the Bluetooth device  
Press the CD/Bluetooth button on the front panel  
of the Hi-Fi Component to switch from Bluetooth  
mode to another mode or turn off the Hi-Fi Compo-  
nent.  
Play music on the connected device.  
5.  
You can listen to the music playing on the connected  
Bluetooth device over the Hi-Fi Component system.  
In Bluetooth mode, some model's Play/Repeat/Stop/  
Next/Back functions are not available.  
The connected Bluetooth device will wait a certain amount  
of time for a response from the Hi-Fi Component before  
terminating the connection.(Disconnection time may differ,  
depending on the Bluetooth device)  
The product only supports Middle Quality SBC data (up  
to 237kbps@48kHz), and does not support High Quality  
SBC data ([email protected]).  
The currently connected device will be disconnected.  
In Bluetooth connection mode, the Bluetooth connection  
The AVRCP feature is not supported.  
Connect only to a Bluetooth device that supports the  
A2DP (AV) function.  
will be lost if the distance between the Hi-Fi Component  
and the Bluetooth device exceeds 16.25 feet (5 meters).  
If the Bluetooth device comes back into the effective  
range after disconnecting, you can restart the Hi-Fi  
Component to restore the pairing with the Bluetooth  
device.  
The Hi-Fi Component automatically turns off after 25  
minutes in the Ready mode.  
You cannot connect to a Bluetooth device that  
supports only the HF (Hands Free) function.  
Only one Bluetooth device can be paired at a time.  
Once you have turned off Hi-Fi Component and the  
pairing is disconnected, the pairing will not be restored  
automatically. To reconnect, you must pair the device  
again.  
The Hi-Fi Component system may not search or  
connect properly in the following cases:  
Using My Karaoke  
-
If there is a strong electrical field around Hi-Fi  
Component.  
You can use the MY Karaoke function to sing  
along with your favorite CDs and USB tracks.  
-
-
-
If several Bluetooth devices are simultaneously paired  
with Hi-Fi Component.  
If the Bluetooth device is turned off, not in place, or  
malfunctions.  
Note that such devices as microwave ovens, wireless  
LAN adaptors, fluorescent lights, and gas stoves use  
the same frequency range as the Bluetooth device,  
which can cause electric interference.  
1. Connect the microphone to the MIC jack on the front  
of the product.  
`
If your microphone plug is larger than the 3.5 mm  
MIC jack, you need a Connector-Adaptor (not  
supplied) to complete the connection.  
-
First, connect the Connector-Adaptor (not supplied)  
to the MIC jack on the front of the product,  
Second, connect the microphone (with the larger  
jack) to the Connector-Adaptor.  
-
To disconnect the Bluetooth device from  
the Hi-Fi Component  
2. Press the MIC VOL-, + button on the remote  
control to adjust the volume of the microphone.  
You can disconnect the Bluetooth device from Hi-  
Fi Component. For instructions, see the Bluetooth  
device's user manual.  
3. Press the MY KARAOKE button on the remote  
control to suppress the vocal if you need. Each time  
the button is pressed, the selection is changed as  
follows:  
The Hi-Fi Component will be disconnected.  
When the Hi-Fi Component is disconnected from the  
Bluetooth device, the Hi-Fi Component will display  
MY KARAOKE ON  
MY KARAOKE OFF  
`
If you hear strange noises (squealing or howling)  
while using the Karaoke feature, move the  
microphone away from the speakers. Turning down  
the microphone's volume or the speaker volume is  
also effective. Do not set the MICROPHONE towards  
the SPEAKER.  
DISCONNECTED  
READY on the its front display.  
`
`
The microphone does not operate in the AUX and  
TUNER mode.  
If you connect a microphone, GIGA SOUND  
automatically turns off. To turn Giga Sound back on  
you must remove the microphone, and then press  
the Giga Sound button.  
English  
13  
 
Basic Functions  
`
`
`
When My Karaoke is on, EQ and GIGA SOUND do  
not work.  
When you stop playing the CD or USB, My Karaoke  
turns off automatically.  
My Karaoke is only available when a microphone is  
connected to the HI-Fi Component.  
Listening to the Radio  
To Store the Stations You Want  
You can store up to:  
15 FM stations.  
1. Select FM by pressing the TUNER/AUX button.  
10 Skip Function  
2. To search for a station, press the TUNNING MODE  
button on the remote control or the STOP button on  
the product one or more times until MANUAL is  
displayed.  
Press the +10 or -10 button while the unit is in  
playback mode. The unit will skip as many as 10  
tracks forward or 10 tracks back from the current  
track.  
3. Select a station by:  
Pressing the TUNING/ALBUM , or . button on  
the remote control to find a station.  
Auto Change Function  
4. Press the MO/ST button to switch between stereo and  
mono.  
You can set the product to play a disc, and then  
play files on USB devices connected to USB 1  
and USB 2 continuously.  
In a poor reception area, select MONO for a  
clear, interference-free broadcast.  
This applies only when listening to an FM station.  
1. Press the AUTO CHANGE button on the remote.  
Each time you press this button, the mode  
switches as follows:  
5. If you do not want to store the radio station found, go  
back to Step 3 and search for another station.  
Otherwise:  
a. Press the ENTER button.  
;
AUTO CHANGE OFF  
AUTO CHANGE ON  
b. Or, press the TUNING/ALBUM button on the  
remote control to select a program number.  
c. Press the ENTER button to save the preset.  
When AUTO CHANGE is "ON",  
-
The Hi-Fi Component will play a disc in the disc slot,  
then play files on a USB device connected to USB1,  
and then play files on a USB device connected to  
USB2. The files will be played continuously.  
If you press the POWER button, function change  
button, or the EJECT button, the AUTO CHANGE  
function automatically turns "OFF".  
6. To store other radio frequencies, repeat Steps 3, 4 and  
5.  
-
In Tuner mode  
In the Manual mode, you can use the [ or ]  
button on the product to search for a radio station  
manually.  
In the Preset mode, you can use the [ or ]  
button or the EASY SEARCHING JOG control on  
-
-
Recording is disabled.  
The REPEAT and SLEEP functions are automatically  
set to OFF and are unavailable.  
-
The CD REC SPEED, USB REC, PROGRAM and  
DELETE functions unavailable.  
the product to search for a stored radio station.  
If you disconnect a playing USB device, the AUTO  
CHANGE function automatically turns "OFF".  
Selecting a Stored Station  
To listen to a stored station, follow these steps:  
1. Select FM by pressing the TUNER/AUX button on  
the product or remote control.  
If there's no device in USB1, the function automatically  
switches to USB2.  
2. Press the TUNING MODE button on the remote  
control until “PRESET” is displayed.  
3. Press [,] button on the main unit or the TUNING/  
ALBUM , , . on the remote control to select a  
preset number.  
or  
Turn the EASY SEARCHING JOG control left or right on  
the main unit to select a stored station.  
14  
English  
 
Advanced Functions  
Timer Function  
4. Set the timer switch-off time.  
a
b
c
d
Press the TUNING/ALBUM , or . button to  
set the hours.  
Press the ENTER (  
) button.  
Setting the Clock  
Result: The minutes flash.  
Press the TUNING/ALBUM , or . button to set  
the minutes.  
For each step, you have a few seconds to set the  
required options. If you exceed this time, you must  
start again.  
Press the ENTER (  
) button.  
Result: VOLUME XX is displayed, where XX corre-  
sponds to the volume already set.  
1. Press the TIMER SET button on the remote  
5. Press the TUNING/ALBUM , or . button to adjust the  
volume level and press the ENTER ( ) button.  
control twice. "CLOCK SET" is displayed.  
2. Press the ENTER (  
) button on the remote  
Result: The source to be selected is displayed.  
control. The hour flashes.  
6. Press the TUNING/ALBUM , or . button to select the  
Increase the hours: TUNING/ALBUM ,  
Decrease the hours: TUNING/ALBUM .  
source the Hi-Fi Component will play when it switches  
on.  
If you select...  
You must also...  
3. When the correct hour is displayed, press the  
ENTER ( ) button, and then the minutes flash.  
FM (radio) ................... a Press the ENTER (  
)
button.  
Increase the minutes: TUNING/ALBUM ,  
Decrease the minutes: TUNING/ALBUM .  
b
Select a preset station by  
pressing the TUNING/  
ALBUM , or . button.  
4. When the correct minute is displayed, press the  
ENTER ( ) button, and then "TIMER PLAY  
CD (compact disc) .....Load a compact disc.  
USB ............................Connect the USB device.  
SET" appears in the display.  
7. Press the ENTER (  
) button.  
Setting the Timer  
Result: TIMER REC SET (Do you want to record?) is  
The timer enables you to switch the product on or  
off at specific times automatically.  
displayed.  
8. Press the ENTER (  
) button.  
Before setting the timer, check that the current time  
is correct.  
For each step, you have a few seconds to set the  
required options. If you exceed this time, you must  
start again.  
Result: REC SET YES/NO is displayed. You can press  
the TUNING/ALBUM , or . button to select  
REC YES or REC NO, and then press  
ENTER button.  
If you no longer want the product to be switched  
on or off automatically, you must cancel the timer  
by pressing the TIMER ON/OFF button.  
If you select REC NO, it will cancel tuner timer  
recording even if you have already set the tuner timer  
recording.  
1)  
If you select REC YES, you can set the tuner timer  
2)  
Example: You want to wake up to music every morn-  
ing.  
recording on and off times.  
Press the ENTER (  
) button.  
a.  
Result: ON TIME is displayed for a few seconds.  
You can set the tuner timer recording switch-  
on time.  
1. Press the TIMER SET button until TIMER PLAY SET is  
displayed.  
2. Press the ENTER (  
) button.  
Press the ENTER (  
) button.  
b.  
Result: ON TIME is displayed for a few seconds. You  
can set the timer switch-on time.  
3. Set the timer switch-on time.  
Result: OFF TIME is displayed for a few seconds.  
You can set the tuner timer recording switch-  
off time.  
a
b
c
d
Press the TUNING/ALBUM , or . button to  
set the hours.  
Press the ENTER (  
) button.  
Result: The minutes flash.  
Press the TUNING/ALBUM , or . button to  
set the minutes.  
Press the ENTER (  
) button.  
Result: OFF TIME is displayed for a few seconds.  
You can now set the timer switch-off time.  
English  
15  
 
Advanced Functions  
The maximum length of time for tuner timer recording is  
5 hours.  
USB 1  
Connect the USB device with the files you want to  
record to USB 1 jack.  
Press the USB button to select USB 1.  
If the timer switch on and off times are identical, the  
word ERROR is displayed.  
You can use the [, ] buttons on the product  
instead of the TUNING/ALBUM , or . button to  
make adjustments in Steps 3 through 8.  
If the switch-on or -off time is the same as the timer  
recording time, only the switch-on or -off time is  
effective, and the timer recording is not applied.  
When you use the auto timer, you may need an  
additional step to use a CD or USB device with it,  
depending on the disc (or device). Consequently, it is  
easier to use the tuner instead.  
Play a song from USB 1.  
External Source  
Connect an External device/MP3 player to the  
product.  
Press the TUNER/AUX button to select <AUX IN 1 or  
AUX IN 2>.  
Play a song from the external device.  
3. Press the USB REC button on the remote control to  
start recording.  
If you select CD or USB mode when there is no disc or  
no USB in the product, it will automatically change to  
TUNER.  
CD  
Track recording message is displayed and CD  
recording starts.  
If you want to record all the tracks on the disc,  
press and hold the USB REC button. Then, Full CD  
recording message will be displayed.  
Cancelling the Timer  
After having set the timer, it will start automatically  
as shown by the TIMER ON message on the dis-  
play. If you no longer want to use the timer, you  
must cancel it.  
RADIO  
Tuner recording message is displayed and recording  
starts.  
To cancel the timer, Press the TIMER ON/OFF button  
once.  
To restart the timer, Press the TIMER ON/OFF button  
once again.  
CD-ROM/ USB  
“FILE COPY” is displayed and recording starts.  
You can also copy a folder including MP3/WMA files  
to a device on USB 2. if you press and hold the USB  
REC button while the system plays an MP3 or WMA  
file in a folder, your system will display "FOLDER  
COPY".  
When you select the TIMER OFF mode, the TIMER  
RECORDING and TIME function are not available.  
When the recording is done, “STOP” will be displayed.  
If there is a file with the same name on the USB 2  
device, "EXIST FILE" is displayed, and the function is  
canceled.  
If a microphone is connected to the product and you  
press the USB REC button, you activate the MP3  
Recording function, not the Copy function.  
When you press the USB REC button for a second,  
file copy starts. When you press the USB REC button  
for a few seconds, folder copy starts.  
The Recording Function  
Basic Recording  
You can record from a CD, a USB device, a radio  
broadcast, or an external source to a USB storage  
device.  
1. Connect the external USB storage device to a USB  
External Source  
(
) jack on your product.  
AUX recording message is displayed and recording  
starts.  
2. Play a disc or USB, turn on the radio and select a  
station, or connect the external source to your  
product as described below.  
CD/USB1(MP3) & MIC  
MP3 recording message is displayed and recording  
starts.  
CD  
Press the CD button on the product to select the CD  
function.  
Insert a CD gently into the disc slot.  
Use the CD selection ( [ or ] ) buttons to select the  
desired song.  
4. To stop recording, press the STOP (@) button.  
The recording is automatically saved as an MP3  
file.  
5. After the recording is finsihsed, a directory named  
“RECORDING”(CD-DA), “CD COPY”(CD-ROM/  
USB(WMA/MP3)), “TUNER RECORDING”, “AUX  
RECORDING” or “MP3 RECORDING” is created in  
your device.  
TUNER  
Select FM by pressing the TUNER/AUX button.  
Select the radio frequency you want to record.  
16  
English  
 
Advanced functions  
The WMA/MP2 file just can be copied not recorded.  
Do not disconnect the USB device or the AC Cord during  
recording. You can cause file damage.  
If you disconnected the USB device during recording,  
the product will turn off and you will not be able to delete  
the file that has been recorded. If his occurs, connect the  
USB device to a PC, back up the USB data to the PC,  
and then reformat the USB device.  
If the USB device does not have enough memory, NOT  
ENOUGH MEMORY” will appear on the display.  
The Recording function supports the FAT file systems  
only. The NTFS file system is not supported.  
When you use the CD high speed search function, the  
CD recording function is unavailable.  
With some USB devices, recording time may be longer.  
In the Program mode, you can't use the CD recording  
function.  
When the Recording function is active, the EQ and  
GIGA SOUND functions automatically turn off and are  
unavailable.  
During a CD recording, the REPEAT function automatically  
turns off and is unavailable.  
If you use the MIC function during a CD recording, the  
voice from the microphone will be recorded.  
You can not record audio from the radio when searching  
for a station or if there are no frequencies available when  
the product is set to Tuner mode.  
Note that setting the input level too loud when recording  
music from an external device through the AUX or USB  
channel may introduce noise into the recording. If this  
occurs, lower the external devices volume level.  
;
;
;
;
;
;
;
;
OFF FLAT RANCHERA SAMBA CUMBIA  
;
HABANERA BOOMBA REGGAE MERENGUE  
;
SALSA PARTY POP HIP HOP ROCK JAZZ  
CLASSIC;ELECTRONIC;MP3 ENHANCER;  
VIRTUAL SOUND;USER EQ  
;
;
;
;
;
2. To set the BASS, MID (Middle) and TREB (Treble)  
levels manually, select USER EQ, and then press  
the ENTER button.  
Result: The BASS level (left numeric) flashes..  
Press the TUNING/ALBUM , or . button to  
select a level from -06 to 06.  
Then, press the ENTER button.  
Result: The MIDDLE level (middle numeric) flashes.  
Press the TUNING/ALBUM , or . button to  
select a level from -06 to 06.  
Then, press the ENTER button.  
Result: The TREBLE level (right numeric) flashes.  
Press the TUNING/ALBUM , or . button to  
select a level from -06 to 06.  
Then, press the ENTER button.  
Result: Setting is complete.  
When the Hi-Fi Component is recording, the EQ function is  
turned off automatically and is unavailable.  
If no buttons are pressed within 8 seconds, your settings will  
automatically be cancelled and the previous settings will be  
saved.  
The EQ mode may be different depending on your region.  
Using the FOOTBALL Mode  
The football mode brings greater realism to sports  
broadcasts.  
Recording Speed  
Each time you press the CD REC SPEED button  
on the remote control, the recording speed will  
change as follows:  
1. Press the FOOTBALL MODE button on the product.  
Each time you press the button, the sound mode  
switches as follows:  
RECORD SPEED x 1; RECORD SPEED X 4  
FOOTBALL OFF ; FOOTBALL MODE 1 ;  
When you record from the tuner or an external source, you  
cannot change the recording speed.  
If you select RECORD SPEED X 4, sound is not produced  
during the recording.  
If you connect the microphone, you have one recording speed  
mode available: RECORD SPEED X 1.  
During recording, if you disconnect the microphone, the  
recording will stop. If you reconnect the microphone, the  
recording will not restart.  
FOOTBALL MODE 2  
The FOOTBALL mode may be different depending on your  
region.  
GIGA SOUND Function  
The GIGA SOUND function amplifies the bass  
sound and provides twice the bass for powerful,  
realistic sound.  
Special Sound Effect  
1. Press the GIGA SOUND BEAT button on the main  
unit or the GIGA button on the remote control.  
Each time you press the button, the sound mode  
switches as follows:  
Selecting EQ Mode  
GIGA SOUND BEAT ; GIGA SOUND OFF  
Your Hi-Fi Component system provides predefined  
equalizer settings that are optimized for particular  
music genre. You can also adjust the bass, middle  
and treble levels manually.  
2. To cancel this function, press the GIGA SOUND  
BEAT button until “OFF” is displayed.  
The GIGA SOUND mode may be different depending  
on your region.  
1. Press the EQ button.  
Each time you press this button, the sound mode will  
switch as follows:  
English  
17  
 
Advanced Functions  
BEAT WAVING Function  
The Beat Waving function lets you change the  
Speaker LED display mode.  
1. Each time you press the BEAT WAVING button on  
the product, the Speaker LED display mode changes  
as follows:  
PARTY 1 ; PARTY 2 ; FUN 1 ; FUN 2 ; PURE ;  
FRESH ; LOVE ; JOY ; SUNSET ; SUNRISE ;  
NATURE 1 ; NATURE 2 ; WAVE 1 ; WAVE 2 ;  
;
AURORA OFF  
If you select BEAT WAVING OFF, all the speaker LED  
displays are turned off.  
DJ BEAT Function  
The DJ Beat function lets you turn on the  
FLANGER, PANNING, CHORUS, and WAHWAH  
sound effect functions. The level of each effect is  
adjustable.  
The set scope is [-15 ~ +15] and the initial set up  
values are all 0.  
FLANGER : Creates a vibration similar to the sound of a jet  
engine revving up and down.  
PANNING : Increases the left and right speaker's output in  
turn and makes it seem as if the sound is moving  
from side to side.  
WAHWAH : Creates a 'Wah~ Wah~' effect.  
CHORUS : Creates a vibration that sounds like a singing  
chorus.  
1. To set the desired effect, press the FLANGER,  
PANNING, CHORUS, or WAHWAH button on the  
product.  
The blue LED turns on around the button you pushed  
and around the DJ BEAT button.  
You can control the intensity of the effect with the  
Volume Jog. To control the volume, press the product's  
DJ BEAT button.  
To cancel an effect, press the effect's button again.  
To change to a different effect, press another effect  
button.  
You can apply the PANNING effect to the FLANGER,  
CHORUS, or WAHWAH effects.  
To apply the PANNING effect to another effect, press  
the PANNING button when the other effect is active or  
press another effect button when the PANNING effect  
is active.  
Use the Volume JOG to control the intensity of the  
effect that was activated last. For example, if you  
activated the WahWah effect and then the Panning  
effect, the Volume Jog will control the Panning effect.  
To control the intensity of the effect you applied first,  
press the button of effect that you applied last to turn  
it off. Then, you can use the Volume Jog to control the  
intensity of the first effect.  
18  
English  
 
Troubleshooting  
Troubleshooting  
Refer to the chart below when this product does not function properly. If the problem you are  
experiencing is not listed below or if the instruction below does not help, turn off the product,  
disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service  
Center.  
Symptom  
Check/Remedy  
I cannot eject the disc.  
• Is the power cord plugged securely into the outlet?  
Turn off the power and then turn it back on.  
Playback does not start  
immediately when the  
• Are you using a deformed disc or a disc with scratches on the surface?  
• Wipe the disc clean.  
Play/Pause button is pressed.  
Sound is not produced.  
• No sound is heard during fast playback, slow playback, and step  
motion playback.  
• Are the speakers connected properly? Is the speaker setup correctly  
customized?  
• Is the disc severely damaged?  
The remote control does not  
work.  
• Is the remote control being operated within its operational angle and  
distance range?  
• Are the batteries drained?  
• The product is not working.  
(Example: The power goes out or  
the front panel key doesn't work  
or you hear a strange noise.)  
• Run the reset function. With the “NO DISC” message on the display of  
the product and no disc in the disc slot, press and hold the STOP (@)  
button on the product for more than 5 seconds.  
Using the RESET function will erase all stored settings.  
Do not use this unless necessary.  
• The product is not working  
normally.  
Can't receive radio broadcast.  
• Is the antenna connected properly?  
• If the antenna's input signal is weak, install an external FM antenna in an  
area with good reception.  
English  
19  
 
Specifications  
Specifications  
AC110-120V~ 50/60Hz 80W  
8 Kg (17.64 pounds)  
Power Requirements  
Main unit  
Weight  
70 Kg (154.32 pounds)  
Speakers  
General  
Main unit  
23.1 in. x 9.4 in. x 15.3 in. (588mm (W) X 238mm (H) X 388mm (D))  
Dimensions  
Each Speaker  
23.1 in. x 34.7 in. x 22.7 in. (588mm (W) X 882mm (H) X 577mm (D))  
41° ~ 95° F (+5°C~+35°C)  
Operating Temperature Range  
Operating Humidity Range  
Signal/Noise ratio  
10 % to 75 %  
55 dB  
10 dB  
FM Tuner  
CD Disc  
Usable sensitivity  
1 %  
Total harmonic distortion  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
CD : 12 cm (COMPACT DISC)  
640W/CH (4Ω)  
640W/CH (4Ω)  
22Hz~20KHz  
65 dB  
Front speaker output  
Subwoofer output  
Frequency range  
S/N Ratio  
Amplifier  
Channel separation  
Input sensitivity  
60 dB  
800mV (AUX)  
*: Nominal specification  
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.  
- Weight and dimensions are approximate.  
- Design and specifications are subject to change without prior notice.  
- For information on the power supply and power consumption, refer to the label attached to the product.  
20  
English  
 
WARRANty  
LIMItED WARRANty tO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered  
new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in  
materials and workmanship for a limited warranty period of:  
One (1) year Parts and Labor*  
(*90 Days Parts and Labor for Commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.  
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the  
product to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned  
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products  
become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the  
remaining original warranty, or ninety (90) days, whichever is longer.  
SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the  
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to  
the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the  
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for  
which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse,  
neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies,  
accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or  
which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer  
adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered  
and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise,  
echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free  
operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED  
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH  
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF  
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF  
THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY  
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE  
PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING  
THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER  
AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR  
INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG.  
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS  
PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state.  
To obtain warranty hardware service, please contact SAMSUNG customer care center.  
 
QUESTIONS OR COMMENTS?  
COUNTRY  
CALL  
OR VISIT US ONLINE AT  
WRITE  
1-800-SAMSUNG  
(726-7864)  
Samsung Electronics America, Inc. 85  
Challenger Road Ridgefield Park, NJ 07660  
U.S.A  
AH68-02612A-00  
 

Radio Shack Stereo Amplifier 32 2054 User Guide
Renesas Computer Hardware M37630T RFS User Guide
Rinnai Fan FS35ETRBL US User Guide
Rinnai Water Heater 16e User Guide
RocketFish Computer Keyboard RF CMBO User Guide
Samsung Flat Panel Television LC650 QSG User Guide
Samsung Microwave Oven CE2933N User Guide
Samsung Projection Television HLN467W1 User Guide
Schwinn Exercise Bike 231 User Guide
Sears Garage Door Opener 13953535SRT1 User Guide