Samsung Flat Panel Television LC650 QSG User Guide

Connecting an audio device (Home Theater, etc.)  
Quick Setup Guide  
Step 4: Connect External Devices  
Congratulations on the purchase of your new Samsung TV.  
Read this setup guide to get your TV up and running quickly.  
Connect your TV to your Home Theater or other  
audio device to enjoy enhanced Sound quality.  
Analog Audio connection  
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)  
Using an Audio Cable  
1-800-SAMSUNG (1-800-726-7864)  
Use one of the connections below to connect your TV to an external A/V device. We recommend using HDMI for the highest picture quality.  
STOP  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park, NJ 07660-2112  
Samsung Electronics Canada Inc.  
55 Standish Court Mississauga, Ontario L5R 4B2  
Call Center hours of operation: Mon-Sun, 9:00 AM -12  
AM EST.  
Amplifier / DVD home theater  
AUDIO IN  
Please do not return this unit.  
Best Connection  
If you have problems operating your  
TV, call:  
Audio (Not Supplied)  
HD connection (up to 1080p)  
1-800-SAMSUNG (1-800-726-7864)  
For web support please visit:  
register.  
Digital Audio connection  
Using an HDMI Cable  
Using an Optical Cable  
DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box)  
satellite receiver  
HDMI Cable (Not Supplied)  
Digital Audio System  
HDMI OUT  
DVD  
Optical Cable (Not Supplied)  
OPTICAL  
Step 1: Install the Stand  
Very Good Connection  
HD connection (up to 1080p)  
Follow the steps below to connect the TV to the stand.  
HDMI to DVI Cable (Not Supplied)  
Connecting a PC  
NOTE  
Using an HDMI to DVI Cable  
Make sure to distinguish between the front and back of the Stand and  
Guide Stand when assembling them.  
x
HD connection  
Connect your TV to a PC to use it as  
a Monitor.  
Using an HDMI to DVI Cable  
Device  
AUDIO OUT  
DVI OUT  
Make sure that at least two persons lift and move the LCD TV.  
x
x
Audio (Not Supplied)  
AUDIO OUT  
Stand the product up to fasten the screws. If you fasten the screws with  
the LCD TV placed down, it may lean to one side.  
HDMI to DVI Cable (Not Supplied)  
Audio Cable (Not Supplied)  
DVI OUT  
Good Connection  
Video Cable (Not Supplied)  
Top view  
Component connection (up to 1080p)  
Audio Cable  
(Not Supplied)  
Screws (M4 X L12)  
Component Cable (Not Supplied)  
Using a Component Cable  
DVD, Blu-ray player, cable box, STB satellite receiver, VCR  
Blu-ray player  
Guide Stand  
Stand  
Lowest Quality Connection  
Front  
Audio/Video connection (480i only)  
1
2
Connect the Guide Stand to the  
Stand using five screws (M4 X L12)  
as shown.  
Audio Cable (Not Supplied)  
COMPONENT OUT  
AUDIO OUT  
Using an D-Sub Cable  
Using an Audio/Video Cable  
PC OUT  
Rear  
DVD, Blu-ray player, cable box, STB satellite receiver, VCR  
VCR  
D-Sub Cable (Not Supplied)  
Audio Cable (Not Supplied)  
Rear  
VIDEO OUT  
AUDIO OUT  
AUDIO OUT  
When connecting to AV IN 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the  
AV IN 1 label. The jack will not match the color of the video cable (yellow).  
With your TV upright, connect the  
TV to the Stand.  
3
Fasten two screws (M4 X L12) at  
position 1, and then fasten the  
two screws (M4 X L12) at position  
2.  
Changing the Picture Mode  
Step 5: Run Plug & Play  
6
Select the Daylight savings time setting: Off or On, and then press the  
ENTER button.  
E
Your TV has four preset Picture Modes with factory adjusted settings, each  
designed to give you an excellent picture under specific conditions.  
The Picture Modes are listed and described in the table below:  
When you turn on your TV for the first time, it automatically launches the Plug &  
Play function. With Plug & Play, you can select the On Screen Display language, set  
the clock mode, and launch the TVs channel memorizing process.  
2
1
7
8
Select the time zone in which you live, and then press the ENTER  
E
button.  
It also displays connection instructions similar to those in this guide.  
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow  
buttons on your remote. To make a selection, press the ENTER  
To skip a screen, press the MENU button. To turn on your TV, press the POWER  
Mode  
Description  
After the time zone screen, The connection method for best HD screen  
quality is displayed. Press the Right arrow button on your remote to view  
each screen in succession. Press the Blue button to skip this section.  
Rear  
Dynamic  
Brightens picture. For a vibrant, enhanced image in brightly lit or  
sunny room.  
E
button.  
Standard  
Natural  
For a bright, detailed picture in a normally lit room.  
button on the remote or on the TV. To run Plug & Play, follow these steps:  
9
The Enjoy your TV. screen appears. Then press the ENTER  
E
button.  
For a comfortable, easy-on-the-eyes picture in a normally lit room.  
For a studio quality cinema picture in a dimly lit or dark room.  
Step 2: Install the Batteries into the Remote  
Movie  
1
2
3
Using your remote control,  
select the language for the On  
Screen Display (OSD), and then  
Plug & Play  
Changing the Screen Size  
To install batteries into your remote  
control, follow these steps:  
Select Language of the OSD.  
English  
Español  
Français  
To change the Picture Mode, follow these steps:  
Your TV has several screen size options, each designed to work best with specific  
types of video input. If you have a cable box or satellite receiver, it may have its own  
set of screen sizes as well.  
To change the screen size, press the P.SIZE button on your remote. The first time  
you press it, your TV displays the current setting. Thereafter, each time you press  
the P.SIZE button, you change the size of the picture on the screen.  
1. Lift the cover on the back of the  
remote upward as shown in the figure  
to the right.  
Menu Language  
:
press the ENTER  
E
button.  
1. Turn on your TV, press the TOOLS button on your remote.  
The Tools menu appears.  
Select Home Use, and then  
press the ENTER button.  
U
Move  
E
Enter  
2. Using the or on your remote, select Picture Mode.  
E
2. Install two AAA batteries.  
If you select Store Demo, the TV will reset your picture and audio settings  
every 30 minutes.  
3. On the Picture Mode menu, use the or button on your remote to select  
Make sure to match the + and -  
ends of the batteries to the diagram in the battery compartment.  
the Picture Mode you want.  
The following sizes are available:  
4. Press the EXIT button to exit the menu.  
3. Replace the cover.  
Select Antenna Source and Channel Source. If Antenna Source is  
Cable or Auto, you must select Channel Source to same type as your  
cable system type. After selecting source, select Search; then press the  
Setting the Clock  
ENTER  
E
button on your remote.  
Before you can use your TVs On/Off Timer, you must set the clock. To set the  
clock, follow these steps:  
1. Turn on your TV, press the MENU button on your remote, then select Setup →  
Step 3: Connect Power and Antenna or Cable  
Most cable systems are Standard (STD) systems, If you are not sure  
about what kind of cable system you have, contact your cable company.  
16:9 Widescreen  
4:3 Standard screen  
Wide Fit  
VHF/UHF Antenna  
If your TV is attached to a cable or satellite box, skip Steps 3 through 5.  
After Plug & Play is complete, set your TV to Channel 3 or 4, according  
to the directions for your cable or satellite box.  
Time.  
2. Select Clock Mode, and then press the ENTER  
E
button.  
Connect Ant In to  
Antenna Cable (Not Supplied)  
or  
3. Choose Auto or Manual.  
Wall cable jack  
Zoom 1  
Zoom 2  
Screen Fit  
VHF/UHF Antenna  
Cable or Satellite box  
Ant or Cable Out  
If you select Auto, the current time will be set automatically using the time  
from a digital channel.  
4
5
The TV memorizes the available channels. This process can take up to 45  
minutes.  
x
x
Screen Fit: Displays the full image without any cut-off when HDMI (720p /  
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.  
Use a 75 ohm (round) cable.  
If you select Manual, you can set the Month, Day, Year, Hour, Minute  
and am/pm directly by pressing up, down, left and right arrow button on  
your remote.  
After the TV has memorized the channels, choose the Clock Mode. Select  
Auto if you have a digital channel in your area. Select Manual if you don’t, or  
Make sure the AC power cord is plugged in securely to  
the wall outlet and the TV.  
if you have a cable or satellite box. When done, press the ENTER  
E
button.  
4. Press the RETURN button on your remote when done.  
If you select Manual, the clock setting screen appears.  
 

Remington Trimmer ST3812B, ST4514B User Guide
Rockford Fosgate Speaker HPC1204 User Guide
Roland Recording Equipment SCWS01 User Guide
Samsung Bread Maker SGH D780 User Guide
Samsung Computer Drive BN68 01416D 00 User Guide
Samsung MP3 Player 20051027153106109 User Guide
Samsung Refrigerator DA68 01454B User Guide
SECO LARM USA Home Safety Product SS 075C PE User Guide
SECO LARM USA Security Camera EV 122C FVA3Q User Guide
Senco Power Screwdriver DS200 S4 User Guide