Calisto P240-M
USB Handset
USER GUIDE
TM
Contents
1 Package Contents and Features................................ 4
2 Set Up ........................................................................ 5
Connecting USB Phone to PC....................................... 5
3 Using Your Calisto P240-M USB Handset ................ 6
Placing a Call Using Lync/Microsoft Office
Communicator............................................................... 6
Placing a Call Using the Dial Pad .................................. 6
Answering and Ending a Call......................................... 6
Rejecting an Incoming call ............................................ 6
Answering a Call During an Active Call ......................... 6
Muting the Microphone.................................................. 6
Redial............................................................................. 6
Adjusting Incoming Volume ........................................... 6
Adjusting Call Alert Volume............................................ 6
Using the Speakerphone .............................................. 7
Placing a call on hold to make a second call ................ 7
Changing Language Settings ........................................ 7
4 Troubleshooting.......................................................... 8
Plantronics Calisto P240 USB Handset
1 Package contents and features
10
9
8
7
3
5
2
4
6
1
11
Plantronics Calisto P240 USB Handset
4
2 Setup
2.1 Connecting USB Phone to PC
1 Connect the P240-M USB cable into any open USB port
on your computer. Windows will automatically detect a new
device and no additional drivers are necessary.
2
If you are also using another audio device with Microsoft Lync
make sure the P240-M is the default device in the Handset or
Headset section of the Audio Set Up Tool.
The P240-M has two function keys (3 & 5) just under the LCD.
These correspond to the text above them. When pressed they will
perform the task above them in the display at the time they were
pressed. Their function may change as a result of pressing them.
Plantronics Calisto P240 USB Handset
5
3 Using Your Calisto P240-M USB Handset
Muting the Microphone
Placing a Call Using Microsoft Office
Communicator
1 To mute the microphone during a call, select the mute using
the function key (3) under mute on the LCD. The LCD will
display that the handset is muted and a soft beep will be
played through the speaker.
1 To place a call using the Microsoft Lync contact list, open the
contact list by double clicking the OCS icon.
2 Select the desired number from the list and click the handset
icon to the right of the contact’s name. The call may ring on
the speakers but will transfer to the handset upon answer. The
call can be transferred to the handset while dialing by pressing
the send/answer (2) button on the handset.
2 To unmute the microphone, select the unmute function using
the same function key.
Redial
To redial, select menu (3), use the scroll key (6) to highlight redial
and select (3). This will dial the last number called.
Placing a Call Using the Dial Pad
1 To place a call with the dial pad (1), dial the desired number on
the P240-M dial pad and press the green call/answer function
key (2).
Adjusting Incoming Volume
During a call to increase or decrease the incoming volume press
the + or – buttons (7) on the side of the P240-M. The volume
adjustment will display on the LCD.
2 If you make an error while dialing you can edit the number by
selecting the back function using the function key (3) under
delete on the LCD (9).
To adjust the handset volume when not in an active call select
menu (5) and use the select key (5) to choose handset volume
(using the scroll key (6) will highlight different functions that could
be selected). Once selected press the scroll key up or down to
adjust and then select OK to save. Pressing back before OK will
result in the handset defaulting back to its original setting. Press
back after OK will take you back to the menu, pressing back
again will take you back to the main screen.
3 If you want to clear the number press the call end button (4),
this will clear the display.
Answering and Ending a Call
1 To answer a call press the green Call/Answer Function Key.
2 To end a call press the red Call End Function Key.
For more adjustment options use the volume control available in
Windows or on your softphone application.
You can also answer a call using the built in speakerphone by
pressing the speakerphone button (8).
Adjusting Call Alert Volume
Rejecting an Incoming call
To adjust the ringer volume when not in an active call select menu
(5) and use the scroll key (6) to highlight Ring Tone press select (5)
and then use the scroll key (6) to highlight Volume and select (5).
Once menu is selected press the scroll key up or down to adjust
volume and then select OK to save the setting. Pressing back
before OK will result in the handset defaulting back to its original
setting. Press back after OK will take you back to the menu,
pressing back again will take you back to the main screen.
To reject a call, press the red call end function key.
Answering a Call During an Active Call
Press the send/answer button (2). This will place the first call on
hold & answer the incoming call.
OR
You can also turn the ringer On or Off by selecting Ringer On/Off
from the Ring Tone Menu.
You can place the first call on hold in Microsoft Lync and answer
the second call either in Microsoft Lync or by pressing the green
call/answer button. You can manage/resume calls with the hold
function as usual within Microsoft Lync.
Using the Speakerphone
1 Press the speakerphone key (8). The audio functions will be
Plantronics Calisto P240 USB Handset
6
transferred to the built in speakerphone in the handset.
2 Press the speakerphone key again and the audio functions will
be transferred back to standard handset mode.
Pressing the end key will end the call and return the handset to
handset mode for the next call.
To adjust the speakerphone volume when not in an active call
select menu (5) and use the scroll key (6) to highlight handsfree
volume then press select (5). Once selected press the scroll key
up or down to adjust and then select OK to save. Pressing back
before OK will result in the handset defaulting back to its original
setting. Press back after OK will take you back to the menu,
pressing back again will take you back to the main screen
Use caution not to activate the speakerphone when the handset
is against your ear. In the event that you do remove the handset
from your head. switch back to handset mode before replacing
the handset to your ear.
The call alert signal is quite loud, do not hold the handset to your
ear while the phone is ringing (second call alert will be much
quieter and the handset can be used normally with this beeping).
Placing a call on hold to make a second call
1 Press the send/answer button (2) then call the 2nd number as
usual.
2 To end the 2nd call simply press the call end key (4). Press the
send/answer key to resume the first calll.
Changing Language Settings
1 The P240-M supports 11 basic languages to change from the
default English select Menu (3) and use the scroll keys (6) to
highlight Language. Slect Language (3) then use the scroll key
(6) to highlight the language you want and press Select (3) to
choose that language. Press Back (5) to return through the
menu to the main display.
Plantronics Calisto P240 USB Handset
7
4 Troubleshooting
Handset does not dial out
1. Unplug all Audio Devices from the PC
2. Reconnect the P240-M
3. Choose Set Up Audio and Video from Tools in the Microsoft Lync menu
4. Choose “default Calisto P240-M”
I always get Microsoft Lync dialtone
when I press the speakerphone
button. I cannot just stream audio
through the speakerphone.
The speakerphone button is designed to take Lync off hook when no call is present, to stream
audio through the handset speakerphone install Plantronics Spokes software and de-select the
option to enable Lync dialtone in the Preferences tab of the Plantronics Control Panel.
I do not get Caller ID
Check the compatibility of your softphone. The P240 does not get Caller ID information from Avaya
One-X or Cisco IP Communicator.
I cannot dial out
Check the compatibility of your softphone. Cisco IP Communicator does not support dialing from
the P240.
I cannot use the dialpad to navigate
menus or enter information while in
a call
Check the compatibility of your softphone. Use the softphone keypad, some softphones may not
support in call DTMF signaling. Avaya One-X does not support in call DTMF tones from external
devices.
Plantronics Calisto P240 USB Handset
8
NEED MORE HELP?
plantronics.com/support
Plantronics, Inc.
345 Encinal
Santa Cruz, CA 95060
United States
Tel: 800-789-4971
plantronics.com
© 2011Plantronics, Inc. All rights reserved. Plantronics, the logo design, P240 and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc.
84428-01M (10.11)
|