Philips Flat Panel Television 15PF9945 99 User Manual

LCD TV  
Quick Use and Hookup Guide  
IMPORTANT  
CONTENTS  
NOTE: This owner's manual is used with several  
different television models. Not all features (and  
drawings) discussed in this manual will necessarily  
match those found with your television set. This is  
normal and does not require that you contact your  
dealer or request service.  
Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1  
Component Video Input Connections . . . . . . . . . . .3  
High Definition Input Connections . . . . . . . . . . . . .3  
Headphone/Sub-woofer/Data Jacks . . . . . . . . . . . . .3  
PC (Monitor) Connection . . . . . . . . . . . . . . . . . . . .4  
AV2 Input Connections . . . . . . . . . . . . . . . . . . . . . .4  
AV3 Input Connection . . . . . . . . . . . . . . . . . . . . . . .4  
Monitor Output Connections . . . . . . . . . . . . . . . . . .4  
Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Remote Battery Installation . . . . . . . . . . . . . . . . . . .1  
Remote Control Button Descriptions . . . . . . . . . . . .1  
Hooking up the Television  
Basic Cable/Cable Box TV Connections . . . . . . . . .2  
Basic Antenna TV Connections . . . . . . . . . . . . . . . .2  
AV1 Input Connections . . . . . . . . . . . . . . . . . . . . . .3  
WARNING: TO PREVENT FIRE OR SHOCK  
HAZARD DO NOT EXPOSE THIS UNIT TO  
RAIN OR EXCESSIVE MOISTURE.  
BASIC LCD TV AND REMOTE OPERATION  
Volume and Channel buttons are located  
on the top of the television cabinet.  
LCD TELEVISION  
his LCD television has a set of controls located on the top of  
Tthe cabinet for use when the remote control is not needed.  
Remote Sensor Window  
Press the POWER button on the front of the TV cabinet to  
turn the TV ON.  
1
DC Input located on the  
bottom jack panel of the TV  
Note: With AutoChron ON, the TV will search for a PBS chan-  
nel to set the clock before powering itself on. This can take a  
few seconds.  
Press the VOLUME + button to increase the sound level or  
the VOLUME – button to lower the sound level.  
Pressing both buttons at the same time will display the  
onscreen menu. After you are in the menu, use these buttons to  
make adjustments or selections.  
2
DCin(24V) PCinput(VGA)  
MENU  
VOLUME  
CHANNEL  
Press the CHANNEL + or – button to select TV channels.  
Use these buttons to make adjustments or selections in the  
onscreen menu.  
3
There is also a set of Audio and Video Input jacks located on both sides  
and the bottom of the television cabinet. Refer to the Audio/Video  
Hookup sections within this Guide.  
2
1
3
Be sure to point the remote at the  
Remote Sensor window on the  
front of the television when using  
the remote control to operate the  
television.  
Power Cord and Adapter  
Battery Compartment Door  
REMOTE CONTROL BATTERIES  
o load the supplied batteries into the remote:  
Remote Control  
(shown from the bottom)  
T
Remove the battery compartment door on the back of the  
remote.  
1
Place the batteries (2-AA) in the remote. Be sure the (+) and  
(–) ends of the batteries line up correctly (the inside of the case  
is marked).  
2
Reattach the battery compartment door.  
2 “AA” Batteries  
Battery Compartment  
3
REMOTE CONTROL BUTTONS  
Power Button - Press to turn the TV ON and OFF.  
Position Button - When using the PC Mode and the PIP window is present  
on the screen, press the Position button to move the PIP window to any of the  
four corners.  
PIP Button - When in the PC Mode, pressing the PIP button will bring up a  
smaller second screen window to view programming while using the TV as a com-  
puter monitor.  
PIP  
POSITION  
CLOCK  
CC  
Accessory Device ᮤᮤ, , , ᮣᮣ, II Buttons - Press to rewind, stop, play,  
CC Button - Press to select Closed Captioning options within the menu.  
TV  
PROG. LIST  
fastforward, or pause/freeze a videotape, or DVD.  
(See the Directions for Use manual for details.)  
DVD  
ACC  
TV/DVD/ACC Mode Switch - Slide to the TV position to control TV func-  
tions, to the DVD position to control DVD Player functions, or to the ACC position  
to control the functions of accessory devices (a cable converter, DBS, or VCR, for  
example).  
Clock Button - Press the CLOCK button to access the onscreen Clock  
SLEEP  
TV/VCR  
A/CH  
SOURCE FORMAT  
menu.  
Format Button - Press to toggle the different screen format options.  
AUTO  
SOUND  
ACTIVE  
CONTROL  
AUTO  
PICTURE  
SURR.  
Source Button - Press to toggle between the different A/V Input jack con-  
Program List Button - Press to display a list of channel numbers and their  
names. Each channel will appear as a selectable menu item. Refer to the Program  
List section within the Directions for Use manual supplied with the TV for detailed  
instructions.  
nections and the currently tuned channel.  
MENU  
SOUND  
Auto Picture Button - Press to select an AutoPicture™ control. Choose  
from four factory-set controls (MOVIES, SPORTS, WEAK SIGNAL, and  
MULTI MEDIA) and a PERSONAL control that you set according to your  
own preferences through the onscreen PICTURE menu. The four factory-set  
controls will tailor the TV picture so as to enhance the particular type of pro-  
gram you are watching, or to improve the picture of a program that has a weak  
signal.  
Sleep Button - Press to set the TV to automatically turn itself OFF at a given  
amount of time.  
TV/VCR (A/CH) Button - TV/VCR – Press while in the VCR mode (the VCR  
indicator on the front of the VCR will light) to view the playback of a tape. Press  
again to place in the TV position (the VCR indicator light will go off) to view one  
program while recording another program. A/CH – Press to toggle between the cur-  
rently viewed channel and the previously viewed channel.  
MUTE  
VOL  
CH  
Surr. Sound button - Press to set various factory Incredible Surround  
Sound listening modes. (Refer to the Incredible Surround section within the  
Directions for Use for detailed instructions.)  
RADIO  
PC  
TV  
HD  
Auto Sound Button - Press to select an AutoSound™ control. Choose from  
three factory-set controls (VOICE, MUSIC, and THEATRE) and a PERSONAL to  
tailor the TV sound to enhance the particular type of program you are watching.  
Channel (+) or (–) Buttons - Press to change the tuned channel.  
2
5
8
0
3
6
1
Mode buttons - Press to directly enter a specific mode, use the PC button to  
place the TV in the PC (computer monitor) mode, press the HD button to  
place the TV in the HD (high definition) mode, press the Radio button to place  
the TV in the FM Radio mode, or the TV button to place the TV back to its  
normal TV mode.  
Menu (Select) Button - Press for the onscreen menu to appear. Pressing the  
menu button after menu selections are made will eliminate the menu from the dis-  
play.  
4
7
9
Active Control Button - Press repeatedly to toggle the Active Control to ON or  
STATUS/EXIT  
SURF  
Number Buttons - Press the number buttons to select TV channels. When  
selecting single-digit channels, press the number of the desired channel. The  
TV will pause for a few seconds and then tune to the selected channel. (Note:  
You can press 0, then the number also.) For channels 100 and above, first  
press 1 then the next two numbers of the desired channel.  
OFF. When ON, the sharpness and noise reduction will be continuously monitored.  
Cursor Buttons (Left, Right, Up, Down) - Press these buttons to highlight,  
select, and adjust items on the TV's onscreen menu.  
Volume (+) or (–) Buttons - Press to adjust the TV sound level.  
Mute Button - Press to turn the TV sound OFF. Press again to return the sound to  
Surf Button - Press to select previously viewed channels. You can place up  
to 10 channels in memory. Then by pressing the SURF button you can quickly  
view the select channels. (See the “Using the Channel Surf Control” section in  
your Instructions for Use manual to see how to select a series of channels  
using the Surf button.)  
its previous level.  
Status/Exit Button - Press to see the current channel number on the TV screen.  
Also press to clear the TV screen after control adjustments.  
 
HOOKING UP THE TELEVISION  
BOTTOM OF TV  
AV1 INPUTS  
Audio in (PC/HD)  
HD input  
Pr  
R
Pb  
Y
L
MP  
VIO  
INPUT  
75  
F
he audio/video input jacks on the bottom panel of the TV are  
Tfor direct picture and sound connections between the TV and  
a VCR (or similar device) that has audio/video output jacks.  
AVI  
in  
L
R
Y
Pb  
Pr  
Audio in  
Video in  
DCin(24V)  
PCinput(VGA)  
Connect the VIDEO (yellow) cable to the VIDEO AV1 in  
jack on the bottom of the TV.  
AUDIO IN  
TUNE TO AV1 CHANNEL  
(RED/WHITE)  
1
PIP  
POSITION  
CLOCK  
CC  
Connect the AUDIO (red and white) cables to the  
AUDIO (left and right) AV1 in jacks on the bottom of the  
TV  
PROG. LIST  
VIDEO IN (YELLOW)  
DVD  
ACC  
2
SLEEP  
TV/VCR  
A/CH  
SOURCE FORMAT  
TV.  
AUTO  
SOUND  
ACTIVE  
CONTROL  
UTO  
Connect the VIDEO (yellow) cable to the VIDEO OUT  
jack on the back of the VCR or accessory device being  
PICT
SURR.  
MENU  
SOUND  
3
used.  
Connect the AUDIO (red and white) cables to the  
AUDIO (left and right) OUT jacks on the rear of the VCR  
or accessory device being used.  
MUTE  
BACK OF VCR  
VOL  
CH  
4
(or Accessory device)  
RADIO  
PC  
TV  
HD  
Turn the VCR or accessory device and the TV ON.  
1
2
5
8
0
3
6
VCR (or accessory device)  
(EQUIPPED WITH VIDEO AND  
AUDIO OUTPUT JACKS)  
4
Press the SOURCE button on the remote control to select  
the AV1 channel for the accessory device. AV1 will appear  
in the upper left corner on the TV screen when tuned prop-  
5
7
9
STATUS/EXIT  
SURF  
6
erly.  
With the VCR (or accessory device) ON and a prerecorded  
tape (CD, DVD, etc.) inserted, press the PLAY button to  
view the tape on the television.  
HELPFUL HINT  
7
Note: The Audio/Video cables needed for this connection are not supplied with your TV. Please contact  
your dealer or Philips at 800-531-0039 for information about purchasing the needed cables.  
COMPONENT (CVI) INPUTS  
omponent Video inputs provide the highest possible color and  
Cpicture resolution in the playback of digital signal source  
material, such as with DVD players.  
BOTTOM OF TV  
1
The CVI connection  
Audio in (PC/HD)  
HD input  
Pr  
R
Pb  
Y
L
COMP  
VIDEO  
INPUT  
will be dominate over  
the AV1 in Video Input.  
When a Component  
Video Device is con-  
nected as described, it is  
best not to have a video  
signal connected to the  
AV1 in Video Input  
jack.  
75  
FM ANT  
Connect the Component (Y, Pb, Pr) Video OUT jacks  
AVI  
in  
L
R
Y
Pb  
Pr  
Audio in  
Video in  
DCin(24V)  
PCinput(VGA)  
from the DVD player (or similar device) to the  
COMP(onent) VIDEO Input (Y green, Pb blue, Pr red)  
jacks on the bottom of the TV. When using the Component  
Video Inputs, it is best not to connect a signal to the AV1 in  
Video Jack.  
2
1
AUDIO CABLES  
(RED/WHITE)  
PIP  
POSITION  
CLOCK  
CC  
COMP VID
Pr  
S-VIDEO  
OUT  
VIDEO  
OUT  
AUDIO  
OUT  
TV  
PROG. LIST  
Connect the red and white AUDIO CABLES to the  
COMPONENT  
VIDEO CABLES  
(Green, Blue, Red)  
DVD  
ACC  
R
SLEEP  
TV/VCR  
A/CH  
SOURCE FORMAT  
Audio (left and right) output jacks on the rear of the acces-  
sory device to the Audio (L and R) AV1 in Input Jacks on  
the TV.  
Y
2
AUTO  
SOUND  
ACTIVE  
CONTROL  
UTO  
L
PICT
SURR.  
Pb  
MENU  
SOUND  
4
Turn the TV and the DVD (or digital accessory device)  
ON.  
3
3
ACCESSORY DEVICE  
EQUIPPED WITH COMPO-  
NENT VIDEO OUTPUTS.  
MUTE  
VOL  
CH  
Press the SOURCE button to scroll the available chan-  
nels until CVI appears in the upper left corner of the TV  
screen.  
RADIO  
5
PC  
TV  
HD  
4
HELPFUL HINT  
Insert a DVD disc into the DVD player and press the  
PLAY button on the DVD Player.  
The description forthe component video connectors may differ depending on the DVD player or accessory  
5
digital source equipment used (for example, Y, Pb, Pr; Y, B-Y, R-Y; Y, Cr, Cb). Refer to your DVD or dig-  
ital accessory owner’s manual for definitions and connection details.  
HD (HIGH DEFINITION) INPUTS  
BOTTOM OF TV  
1
Audio in (PC/HD)  
HD input  
Pr  
R
Pb  
Y
L
COMP  
VIDEO  
INPUT  
75  
FM ANT  
f your using a High Definition receiver that can transmit high  
Idefinition programming, the TV can except those signals  
through the HD Inputs located on the bottom of the TV.  
2
HD 1  
AVI  
in  
L
R
Y
Pb  
Pr  
Audio in  
Video in  
DCin(24V)  
PCut(VGA)  
Connect the Component (Y, Pb, Pr) Video OUT jacks  
from the HD Receiver (or similar device) to the HD (Y, Pb,  
Pr) input jacks on the bottom of the TV.  
Coaxial Cable  
Lead-in  
1
2
COMPONENT  
from  
Satellite  
VIDEO CABLES  
(Green, Blue, Red)  
AUDIO  
CABLES  
Dish Antenna  
Connect the red and white AUDIO CABLES to the  
Audio (left and right) output jacks on the rear of the HD  
Receiver to the Audio In (PC/HD) Input Jacks on the bot-  
tom of the TV.  
PIP  
POSITION  
CLOCK  
CC  
AUDIO  
AUDIO  
TV  
PROG. LIST  
L
Y
PB  
PR  
DVD  
ACC  
OUT TO TV  
VCR  
CONTROL  
SLEEP  
TV/VCR  
A/CH  
SOURCE FORMAT  
CH 3  
CH 4  
R
AUTO  
SOUND  
ACTIVE  
CONTROL  
AUTO  
DIGITAL  
AUDIO OUT  
Turn the TV and the HD Receiver ON.  
RF  
PICTURE  
SURR.  
VIDEO  
in 1  
VIDEO  
in 2  
IN FROM ANT  
SATELLITE IN  
PHONE JACK REMOTE  
S-VIDEO  
MENU  
SOUND  
3 Press the HD Mode button to set the TV into the HD  
Rear of HD Receiver  
Mode and tune to the HD signal.  
Coaxial Cable Lead-in  
from Cable Outlet,  
Cable Converter Box,  
or VHF/UHF Antenna  
(Illustration is for reference only.  
Your HD Receiver's jack panel will  
look and be labelled different.)  
4
MUTE  
4
Note: The Audio/Video cables needed for this connection are not  
supplied with your TV. Please contact your dealer or Philips at  
800-531-0039 for information about purchasing the needed  
cables.  
VOL  
CH  
ADIO  
PC  
TV  
HD  
HD RECEIVER  
EQUIPPED WITH COMPONENT  
VIDEO OUTPUTS.  
3
1
2
5
8
3
6
4
7
9
STATUS/EXIT  
SURF  
TV VIEWED FROM THE BACK  
HEADPHONE/SUB-WOOFER  
/DATA JACKS  
Data  
3
1
2
Sub  
woofer  
out  
he left side Jack Panel contains three jacks that can be used  
Tfor your convenience. They include a Headphone Jack, a Sub-  
Woofer Jack, and a Data Jack.  
VIDEO  
out  
VIDEO  
in  
HEAD PHONE JACK - Used for headphone listening in  
any of the available modes. When headphones are connect-  
ed to this jack the TV speakers will be muted.  
1
L
L
JACKS LOCATED  
ON THE LEFT  
REAR OF THE TV  
R
R
SUB-WOOFER JACK - An external Sub-woofer speaker  
can be connected to the TV at this jack. This would pro-  
vide for a deeper bass sound.  
Monitor AV2  
out in  
2
DATA JACK - This jack is used in service applications  
and should not be used by the customer.  
S-VIDEO  
3
3
 
HOOKING UP THE TELEVISION  
BOTTOM OF TV  
PC (MONITOR) INPUTS  
PC  
2
Audio in (PC/HD)  
HD input  
Pr  
Pb  
Y
L
COMP  
VIDEO  
INPUT  
75  
FM ANT  
1
his TV can be used as a PC Monitor. Your computer will have  
Tto be equipped with a VGA type video output and VGA cable.  
1
2
AVI  
in  
R
L
R
Pb  
Pr  
Audio in  
Video in  
DCin(24V) PCinput(VGA)  
Connect one end of the VGA Video cable to the Monitor  
(video) output on the computer to the PC Input (VGA) jack  
on the bottom of the TV.  
AUDIO  
ADAPTER  
Although audio connections are not required, the TV can  
reproduce the computers audio out by an AUDIO  
ADAPTER to the Audio output jack on the computer (if  
available) while connecting the other ends of the Audio  
cables to the Audio In left and right (PC/HD) Input Jacks  
on the bottom of the TV.  
PIP  
POSITION  
CLOCK  
CC  
3
TV  
PROG. LIST  
DVD  
ACC  
SLEEP  
TV/VCR  
A/CH  
SOURCE FORMAT  
VGA/RGB  
Out  
AUTO  
SOUND  
ACTIVE  
CONTROL  
AUTO  
Audio  
Out  
PC with VIDEO VGA OUT  
PICTURE  
SURR.  
MENU  
SOUND  
Turn the TV and the Computer ON.  
3 Press the PC Mode button to set the TV into the HD  
VGA CABLE  
MUTE  
4
Mode and tune to the computer’s signal.  
VOL  
CH  
4
RADIO  
PC  
TV  
HD  
Note: Please contact your dealer or Philips at 800-531-0039 for  
1
2
3
information about purchasing the needed cables.  
ACCESSORY DEVICE  
AV2 INPUTS  
(Camera., DVD, VCR, etc.)  
JACK PANEL  
here are Audio/Video Input Jacks located on both sides of the TV  
Tlocated under removable panels. These jack allow for extra acces-  
sory device connections for items such as cameras or gaming stations.  
BACK LEFT OF TV  
PIP  
POSITION  
CC  
TV  
CLOCK  
PROG. LIST  
5
DVD  
ACC  
SLEEP  
TV/VCR  
A/CH  
SOURCE FORMAT  
Data  
3
Connect the VIDEO (yellow) cable to the VIDEO AV2 in  
AUTO  
SOUND  
ACTIVE  
CONTROL  
TO  
jack on the left rear of the TV. Connect the other end of the  
1
Sub  
woofer  
out  
PICTU
SURR.  
VIDEO (yellow) cable to the VIDEO OUT jack on the back of  
MENU  
SOUND  
1
the accessory device being used. Note: An S-Video cable can  
be used in place of the yellow Video cable if your device is  
equiped with an S-Video Output. S-Video provides better video  
playback.  
4
VIDEO  
out  
VIDEO  
in  
MUTE  
VOL  
CH  
L
L
RADIO  
Connect the AUDIO (red and white) cables to the AUDIO  
PC  
TV  
HD  
2
(left and right) AV2 in jacks on the left rear of the TV. Connect  
R
R
1
4
7
2
5
8
0
3
6
2
the other ends of the AUDIO (red and white) cables to the  
AUDIO (left and right) OUT jacks on the rear of the accessory  
device being used.  
Monitor AV2  
out in  
9
VIDEO CABLE  
STATUS/EXIT  
SURF  
Turn the accessory device and the TV ON.  
S-VIDEO  
3 Press the SOURCE button on the remote control repeatedly  
to select the AV2 channel for the accessory device. AV2 will  
4
AUDIO CABLES  
(Left and Right)  
appear in the upper left corner on the TV screen when tuned  
properly.  
AUDIO  
RIGHT LEFT  
VIDEO  
S-VIDEO  
AN S-VIDEO CABLE CAN BE  
USED IN PLACE OF THE  
YELLOW VIDEO CABLE IF  
DESIRED.  
ACCESSORY DEVICE  
JACK PANEL  
With the accessory device ON, press the PLAY button to acti-  
vate the playback on the television.  
5
AV3 INPUTS  
ACCESSORY DEVICE  
(Camera., DVD, VCR, etc.)  
uch like the AV2 jacks, the AV3 jacks allow for extra accessory  
Mdevice connections for items such as cameras or gaming stations.  
The AV3 Input Jacks are located on the right rear of the TV.  
PIP  
POSITION  
CLOCK  
CC  
JACK PANEL  
BACK RIGHT OF TV  
TV  
PROG. LIST  
5
DVD  
ACC  
SLEEP  
TV/VCR  
A/CH  
SOURCE FORMAT  
Connect the VIDEO (yellow) cable to the VIDEO AV3 in jack  
3
on the right rear of the TV. Connect the other end of the  
AUTO  
SOUND  
ACTIVE  
CONTROL  
TO  
1
PICTU
SURR.  
VIDEO (yellow) cable to the VIDEO OUT jack on the back of  
MENU  
SOUND  
the accessory device being used. Note: An S-Video cable can be  
used in place of the yellow Video cable if your device is equiped  
with an S-Video Output. S-Video provides better video playback.  
1
4
S-VIDEO  
VIDEO  
MUTE  
VOL  
CH  
Connect the AUDIO (red and white) cables to the AUDIO  
RADIO  
(left and right) AV2 in jacks on the right rear of the TV. Connect  
PC  
TV  
HD  
L
2
2
the other ends of the AUDIO (red and white) cables to the  
AUDIO  
R
1
2
5
8
0
3
6
AUDIO (left and right) OUT jacks on the rear of the accessory  
device being used.  
4
7
9
VIDEO CABLE  
STATUS/EXIT  
SURF  
Turn the accessory device and the TV ON.  
AUDIO  
CABLES  
(Left and  
Right)  
3 Press the SOURCE button on the remote control repeatedly to  
select the AV3 channel for the accessory device. AV3 will appear  
4
in the upper left corner on the TV screen when tuned properly.  
AUDIO  
RIGHT LEFT  
VIDEO  
With the accessory device ON, press the PLAY button to acti-  
AN S-VIDEO CABLE CAN BE  
USED IN PLACE OF THE  
YELLOW VIDEO CABLE IF  
DESIRED.  
S-VIDEO  
vate the accessory device (DVD, VCR, CAMERA, etc.) and  
view the playback on the television.  
5
ACCESSORY DEVICE  
JACK PANEL  
Audio System  
Connection:  
MONITOR OUTPUTS  
AUDIO CABLES  
(Red & White)  
Data  
he Monitor (Audio/Video) out jacks are great for recording with a  
Sub  
woofer  
out  
R
L
TVCR or used to connect an external audio system for better audio.  
AUX/TV INPUT  
PHONO INPUT  
For Audio System Connection:  
1
VIDEO  
out  
VIDEO  
in  
Connect one end of the R(ight) and L(eft) AUDIO (Monitor  
L
Out) jacks located on the right rear of the TV to the R and L  
1
R
R
audio input jacks on your sound system. Refer to the AUDIO  
OUT control within the Directions for Use for FIXED or VARI-  
ABLE settings.  
Monitor AV2  
out in  
AUDIO SYSTEM  
with AUDIO INPUTS  
2
AV OUT  
AUDIO L(eft) and R(ight)  
S-VIDEO  
Turn the TV and audio system ON. TV sound can be heard  
through the audio system  
2
Monitor OUT  
VIDEO &AUDIO  
L(eft) and R(ight)  
Second VCR  
For Second VCR Connection/Recorder:  
The following steps allow you to connect a VCR to record the pro-  
gram while your watching it.  
3
Connection/Recorder:  
Data  
Sub  
woofer  
out  
VIDEO CABLE  
(Yellow)  
Connect one end of the yellow Video Cable to the Monitor  
ANTENNA  
IN  
OUT  
VIDEO  
IN  
OUT  
AUDIO  
IN  
VIDEO  
out  
VIDEO  
in  
out VIDEO OUT plug on the left rear of the TV. Connect the  
3
L
R
ANTENNA  
OUT  
other end to the VIDEO IN plug on the second VCR.  
L
L
Connect one end of the red and white Audio cable from the  
R
R
JACK PANEL  
5
Monitor out L and R plugs on the left rear of the TV to the  
Located on the back left of the  
TV  
Monitor AV2  
out in  
4
AUDIO IN plugs on the VCR.  
SECOND VCR  
Turn the VCR ON, insert a black VHS tape and it’s ready to  
record what’s being viewed on the TV screen.  
S-VIDEO  
4
AUDIO CABLES (Red & White)  
5
4
 

Philips Fan 42PFL7803D User Manual
Philips Indoor Furnishings P 8515 B User Manual
Pioneer Stereo Receiver AVIC D1 User Manual
Polaroid Digital Camera HD Professional Action Camera User Manual
Polycom Telephone MD4000 User Manual
Powerware Power Supply FSS 0342J User Manual
Premier Mounts Indoor Furnishings PSD VPS User Manual
Princeton Universal Remote 300 749 User Manual
Printek Printer Mt3 II User Manual
ProForm Treadmill PFTL69711 User Manual