Panasonic Network Card 2SC2295 User Manual

This product complies with the RoHS Directive (EU 2002/95/EC).  
Transistors  
2SC2295  
Silicon NPN epitaxial planar type  
For high-frequency amplification  
Complementary to 2SA1022  
Unit: mm  
+0.10  
–0.05  
0.40  
3
+0.10  
–0.06  
0.16  
Features  
Optimum for RF amplification of FM/AM radios  
High transition frequency fT  
1
2
Mini type package, allowing downsizing of the equipment and  
automatic insertion through the tape packing and the magazine  
packing  
(0.95) (0.95)  
1.9 0.1  
+0.20  
2.90  
–0.05  
10˚  
Absolute Maximum Ratings Ta = 25°C  
Parameter  
Symbol  
Rating  
Unit  
V
1: Base  
2: Emitter  
3: Collector  
Collector-base voltage (Emitter open) VCBO  
Collector-emitter voltage (Base open) VCEO  
Emitter-base voltage (Collector open) VEBO  
30  
20  
V
EIAJ: SC-59  
Mini3-G1 Package  
5
30  
V
Collector current  
IC  
PC  
Tj  
mA  
mW  
°C  
°C  
Marking Symbol: V  
Collector power dissipation  
Junction temperature  
Storage temperature  
200  
150  
Tstg  
55 to +150  
Electrical Characteristics Ta = 25°C 3°C  
Parameter  
Collector-base cutoff current (Emitter open)  
Forward current transfer ratio *  
Transition frequency  
Symbol  
ICBO  
hFE  
Conditions  
Min  
Typ  
Max  
0.1  
Unit  
µA  
VCB = 10 V, IE = 0  
VCB = 10 V, IE = −1 mA  
70  
220  
fT  
VCB = 10 V, IE = −1 mA, f = 200 MHz  
VCB = 10 V, IE = −1 mA, f = 5 MHz  
VCB = 10 V, IE = −1 mA, f = 2 MHz  
VCB = 10 V, IE = −1 mA, f = 10.7 MHz  
150  
250  
2.8  
22  
MHz  
dB  
Noise figure  
NF  
4.0  
50  
Reverse transfer impedance  
Zrb  
Reverse transfer capacitance  
(Common emitter)  
Cre  
0.9  
1.5  
pF  
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.  
2. : Rank classification  
*
Rank  
B
C
hFE  
70 to 140  
110 to 220  
Publication date: March 2003  
SJC00112BED  
1
 
This product complies with the RoHS Directive (EU 2002/95/EC).  
2SC2295  
Cre VCE  
NF IE  
bie gie  
3.0  
2.5  
2.0  
1.5  
1.0  
0.5  
0
12  
10  
8
24  
20  
16  
12  
8
VCB = 6 V  
f = 100 MHz  
Rg = 50 Ω  
Ta = 25°C  
f = 10.7 MHz  
Ta = 25°C  
Vie = gie + jbie  
VCE = 10 V  
7 mA  
100  
4 mA  
2 mA  
58  
IC = 3 mA  
1 mA  
6
4
2
4
f = 10.7 MHz  
0
0
0.1  
1  
10  
0.1  
1
10  
100  
0
8
16  
24  
32  
40  
(
)
(
)
Emitter current IE mA  
(
)
Collector-emitter voltage VCE  
V
Input conductance gie mS  
bre gre  
bfe gfe  
boe goe  
0
0.1  
0.2  
0.3  
0.4  
0.5  
0.6  
0
20  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0
f = 10.7 MHz  
f = 10.7 MHz  
10.7  
0.1 mA  
1 mA  
yre = gre + jbre  
yoe = goe + jboe  
VCE = 10 V  
58  
100  
VCE = 10 V  
58  
2 mA  
IE = −1 mA  
100  
IE = −1 mA  
40  
100  
IE = −4 mA  
58  
60  
58  
100  
58  
80  
100  
100  
yfe = gfe + jbfe  
VCE = 10 V  
f = 10.7 MHz  
120  
0.5 0.4 0.3 0.2 0.1  
0
0
20  
40  
60  
80  
100  
0
0.1  
0.2  
0.3  
0.4  
0.5  
(
)
(
)
Reverse transfer conductance gre mS  
Forward transfer conductance gfe mS  
(
)
Output conductance goe mS  
SJC00112BED  
3
 
Request for your special attention and precautions in using the technical information and  
semiconductors described in this book  
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and  
regulations of the exporting country, especially, those with regard to security export control, must be observed.  
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples  
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other  
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other  
company which may arise as a result of the use of technical information described in this book.  
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office  
equipment, communications equipment, measuring instruments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support  
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-  
ucts may directly jeopardize life or harm the human body.  
Any applications other than the standard applications intended.  
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-  
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product  
Standards in advance to make sure that the latest specifications satisfy your requirements.  
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions  
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute  
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any  
defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure  
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire  
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.  
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,  
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which  
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.  
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita  
Electric Industrial Co., Ltd.  
 

Miele Freezer GT 316 ES User Manual
Miller Electric Welder OM 225A User Manual
NEC Server 1000 Series User Manual
NetComm Network Router Gateway Series User Manual
Nordyne Furnace M3RL User Manual
NuTone Fan ILRF User Manual
Omron Healthcare Thermometer MC 514 User Manual
Optoma Technology Projector HD7300 User Manual
Ozaki Worldwide Portable Speaker EM92905 User Manual
Panasonic CRT Television CT 27D10U User Manual