Oregon Chainsaw 58 Series User Manual

FEATURES AND BENEFITS  
CHAIN  
58- AND 59-SERIES SQUARE-GROUND CHAINS  
These new Oregon® .404”-pitch Super Guard® chains have been carefully developed to replace the  
popular 52AJ/AK/AL family of square-ground chains. Users of our previous 52-series chains will find it  
easy to make the switch. 58CJ/CL, and 59CJ/CK/CL all feature a fast-working new chisel cutter that  
delivers performance superior to its predecessors in all cutting modes. The new cutter is mounted on  
our proven unequal-pitch 59 chassis for superior performance and durability. These chains give  
professional timber cutters who use square-ground .404”-pitch chains what they want: out-of-box  
sharpness, the ultimate in performance, resistance to stretch, and consistency from chain to chain.  
These chains feature ramped depth gauges to reduce kickback energies, and are recommended for  
cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer.  
Safety/ANSI: 58CJ/CL and 59CJ/CK/CL are yellow-label chains with kickback-reducing  
features. These chains do not meet the kickback requirements for low-kickback chains.  
Recommended Use: Professional use by loggers and forest firefighters who prefer  
large saws and square-ground .404”-pitch chain.  
FEATURES  
BENEFITS  
• Square-ground chisel cutters, factory  
ground with optimum angles  
• Superior cutting speed and the ultimate in overall  
peformance (nose-clear, nose-buried, and boring)  
• Smooth, easy cutting, minimal feed force required,  
minimizes operator fatigue  
• Depth gauge is ramp-shaped,  
and offset  
• Reduces roughness and kickback energies  
without affecting performance  
• Clean-ground gullet  
• Maximum chip flow, helps prevent clogs from debris  
• No out-of-the-box filing is needed  
• Lubrilink tie straps  
• Improved chain and bar lubrication  
• More oil stays where it’s needed – on the chain  
• The volume of oil required is reduced  
• Long, high-strength cutter top plate  
• Long working life, durable, resists breakage  
• Made from patented OCS-01 steel-alloy  
material (U.S. patent no. 5,772,957)  
• Tougher than the steel on other chains, 20% tougher  
at room temperature, 125% tougher at minus 20° F  
CHAIN PART  
NUMBER  
CUTTER  
SEQUENCE  
CUTTER  
TYPE  
KICKBACK-REDUCING  
FEATURES  
PITCH  
.404”  
GAUGE  
58CJ  
58CL  
59CJ  
59CK  
59CL  
.058”  
.058”  
.063”  
.063”  
.063”  
Skip  
Standard  
Skip  
Semi-skip  
Standard  
Square-ground  
Chisel  
Ramp-shaped  
Depth Gauges  
Because every  
cut counts  
59CL F&B  
A107036  
AA  
0301  
 

Miele Cooktop CS1312 User Manual
Miele Refrigerator 09 157 540 User Manual
Multiquip Portable Generator 36kW through 97kW models User Manual
Murray Lawn Mower MB12538LT User Manual
Niles Audio Speaker PSW8 User Manual
Nilfisk ALTO Pressure Washer P 1301 P 1501 P 1601 P 1601 X TRA User Manual
Oki Printer 12i User Manual
Oricom Cordless Telephone M120 User Manual
ParaBody Home Gym 823 User Manual
ParaBody Home Gym PBF405C User Manual