ATTIX 360-2M
ATTIX 550-2M
ATTIX 560-2MXC
ATTIX 751-2M
ATTIX 761-2MXC
english
deutsch
français
Operating Instructions................................1-15
Betriebsanleitung......................................16-30
Notice d’utilisation....................................31-45
nederlands Gebruiksaanwijzing ..................................46-60
italiano
Istruzioni sull’uso......................................61-75
Driftsinstruks.............................................76-90
Bruksanvisning .......................................91-105
Driftsvejledning.....................................106-120
Käyttöohje..............................................121-135
norsk
svensk
dansk
suomi
slovensći Navodilo za uporabo ..............................136-150
Uputstvo za rad .......................................151-165
slovenský Prevádzkový návod .................................166-180
hrvatski
český
Provozní návod........................................181-195
Instrukcja obsługi....................................196-210
Kezelési utasítás .....................................211-225
Ðóêîâîäñòâî ïî ýêñïëóàòàöèè ...............226-240
Instrucciones de manejo......................241-255
polski
magyar
ðóññêèé
español
português Instruções de operação........................256-270
ελληνικά Οδηγίες λειτουργίας..............................271-285
türkçe
Ýþletme kýlavuzu.....................................286-300
302001674 - 2005-01-14
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
Contents
1
2
Important safety
instructions
............................................................................................2
Description
2.1 Purpose................................................................................4
2.2 Operating elements..............................................................5
3
4
Before start-up
Operation
3.1 Assembling the cleaner........................................................5
4.1 Connections .........................................................................5
4.1.1 Connecting the suction hose................................................5
4.1.2 Electrical connection ............................................................5
4.1.3 Connecting electrical appliances..........................................6
4.2 Switching on the vacuum cleaner.........................................6
4.2.1 Switch position “I”.................................................................6
4.2.2 Switch position „auto“...........................................................6
4.2.3 Suction power control...........................................................6
4.3 Check volume flow monitor ..................................................6
4.4 Acoustic warning..................................................................7
4.5 Cleaning the filter element (ATTIX 360-2M) .........................7
4.6 Cleaning the filter element (ATTIX 560-2MXC/761-2MXC)..7
5
Applications and
techniques
5.1 Techniques ...........................................................................8
5.1.1 Picking up dry substances ...................................................8
5.1.2 Picking up liquids..................................................................9
6
7
After finishing work
Maintenance
6.1 Switching the vacuum cleaner off and storage.....................9
7.1 Maintenance plan...............................................................10
7.2 Maintenance work..............................................................10
7.2.1 Replacing the waste bag....................................................10
7.2.2 Replacing the filter bag.......................................................11
7.2.3 Emptying dirt tank (ATTIX 3+5) ..........................................11
7.2.4 Emptying the dirt tank (ATTIX 7).....................................11
7.2.5 Replacing filter element (ATTIX 360-2M/550-2M/751-2M).12
7.2.6 Replacing filter element (ATTIX 560-2MXC/761-2MXC) ....12
8
9
Troubleshooting
..........................................................................................13
Further information
9.1 Recycling the vacuum cleaner ...........................................14
9.2 Guarantee ..........................................................................14
9.3 Tests and approvals ...........................................................14
9.4 Technical data ....................................................................15
9.5 Accessories........................................................................15
9.6 EC declaration of conformity ..............................................15
1) Option depending on model
1
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
1 Important safety instructions
Symbols used to mark
instructions
Before using the
vacuum cleaner,
This symbol is
used to mark
always
the
instructions and
keep them read-
read
operating
safety
tions that must
be observed to
instruc-
prevent damage
ily available.
to the vacuum cleaner and its
performance.
This symbol is
used to mark
This symbol in-
dicates tips and
safety
instruc-
instructions
to
tions that must simplify work and to ensure safe
be observed to operation.
prevent damage to persons.
For your own safety
Only allow the vacuum cleaner The use of the vacuum cleaner
to be used by persons who have is subject to valid national regu-
been trained in its use and who lations. Besides the operating
have been explicitly authorized instructions and the binding
to use it.
accident prevention regulations
valid in the country of use, ob-
Despite its simple handling the serve recognized regulations for
vacuum cleaner is not suitable safety and proper use.
for children.
Do not use any unsafe work
techniques.
Transport
Before transporting the dirt Do use a crane hook to lift the
tank, close all the locks.
cleaner.
Do not tilt the cleaner if there is
liquid in the dirt tank.
Purpose and intended use
The vacuum cleaners described
in this operating manual are
suitable for
solvents, acids, alkalis, etc.)
–
flammable, explosive dust
(e.g. magnesium or alumini-
um dust, etc.)
–
commercial use, e.g. in When dust removers are used,
hotels, schools, hospitals, the rate at which air is ex-
factories, shops, offices and changed in the room must be
rental businesses.
adequate if the exhaust air from
–
for separation of dust with an the vacuum cleaner is blown into
exposure limit of greater than the room (please observe regu-
0,1 mg/m³, (dust class M).
lations valid in your country).
The following materials should Before starting work, the operat-
not be picked up by the vacuum ing staff must be informed on
cleaner:
–
–
use of the vacuum cleaner
risks associated with the ma-
terial to be picked up
safe disposal of the picked
up material.
–
–
hot materials (burning ciga-
rettes, hot ash, etc.)
flammable, explosive, ag-
gressive liquids (e.g. petrol,
–
1) Option depending on model
2
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
Precautions and safety regu- Before start-up
lations when using the vacu-
Electrical components
um cleaner
Inspect power cord regularly Check the rated voltage of the
to detect signs of damage, e.g. vacuum cleaner before con-
cracks or ageing.
necting it to the mains supply
system. Ensure that the voltage
If the power cord is damaged, shown on the rating plate cor-
it must be replaced by Nilfisk- responds to the voltage of the
Alto-Service or an electrician to local mains power supply.
avoid danger before use of the
vacuum cleaner is continued.
If you are using an extension
cord, use only those specified
Use only the type of power by the manufacturer or higher
cord specified in the operating quality ones (see section 9.4
manual.
„Technical data“).
Do not damage the power cord It is recommended that the
(e.g. by moving over it or pulling vacuum cleaner should be con-
or crushing it).
nected via a residual current
circuit breaker. This stops the
Disconnect the power cord by supply of electricity if the leak-
pulling the plug only (do not pull age current to earth exceeds 30
or tug the power cord).
mA for 30 ms or it has an earth
tester circuit.
Inspect the vacuum cleaners to
ensure that they are in proper When using an extension lead,
condition. Plugs and couplings check the minimum cross-sec-
in power cords must at least tions of the cable:
have splash protection.
Cable length
m
Cross section
<16 A
<25 A
ø1.5mm² ø2.5mm²
ø2.5mm² ø4.0mm²
Never use the vacuum cleaner if
the filter element is damaged.
up to 20 m
20 to 50 m
Picking up liquids
Arrange the electrical parts
(sockets, plugs and couplings)
and lay down the extension lead
so that the protection class is
maintained.
If foam develops or liquid
emerges, stop work immediately
and empty the dirt tank.
Regularly clean the built in float
Never spray water on to the
upper section of the vacuum
cleaner. Danger for persons,
risk or short-circuiting.
(ATTIX
360-2M/550-2M/751-
2M) and level indicator hose
(ATTIX 560-2MXC/761-2MXC)
to limit the water level and check
that they are not damaged.
Observe the latest edition of the
IEC regulations.
See section 5 for information on
handling liquids and (hazard-
ous) dust.
1) Option depending on model
3
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
Tool socket
Use the socket on the vacuum 2. Switch off the appliance to
cleaner for the purpose defined
in the operating instructions
only.
be connected.
CAUTION!
Follow the operating instructions
Before plugging an appliance and safety instructions for appli-
into the appliance socket: ances connected to the power
1. Switch off the vacuum clean- tool socket.
er
Maintenance, cleaning and Only carry out maintenance
–
–
clean the outside of the vac-
repair
work described in the operating
uum cleaner, wipe it clean or
pack the vacuum cleaner in
well sealed packaging
and avoid spreading depos-
ited harmful dust.
instructions.
Always pull out the mains plug
before cleaning and mainte-
nance of the vacuum cleaner.
During maintenance and repair
During maintenance and clean- work all contaminated parts that
ing, handle the vacuum cleaner could not be cleaned satisfacto-
in such a manner that there is no rily must be:
danger for maintenance staff or
other persons.
–
–
packed in well sealed bags
disposed of in a manner that
complies with valid regula-
tions for such waste remov-
al.
In the maintenance area
–
use filtered compulsory ven-
tilation
–
–
wear protective clothing
clean the maintenance are least once every year by Nilfisk-
so that no harmful substanc- Alto service or a trained person.
A dust test must be performed at
es get into the surroundings.
This test includes, for example,
whether there is damage to
Before removing the vacuum the filter, the vacuum cleaner is
cleaner from the area contami- sealed to the air and the control
nated with harmful substances:
equipment works properly.
adversely affect safety.
Accessories and spare parts
Use only the brushes supplied Use only original Nilfisk-Alto
with the vacuum cleaner or accessories and spare parts
specified in the operating manu- (see section 9.5). The use of
al. The use of other brushes can other parts can adversely affect
safety.
2 Description
2.1 Purpose
This cleaner is suitable to pick Depending on how hazardous
up dry, nonflammable dust, liq- the dust is, the cleaner must
uids, sawdust and hazardous be fitted with appropriate filters.
dusts with maximum room con- See table in section 5.1.1.
centration values ≥ 0.1 mg/m3
(dust class M).
1) Option depending on model
4
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
2.2 Operating elements
See fold-out page at the front of
these operating instructions.
6
7
8
9
Dirt tank
Grip to empty tank1)
Inlet fitting
1
2
3
4
Handle
Appliance socket1)
Suction pipe support
Accessory holder
Applicance switch with
suction power control
Retaining clamp
10 Cable hook
11 Operating knob for filter
cleaning1)
12 Tank locks1)
13 Castor with brake
14 Hose diameter setting
5
3 Before start-up
3.1 Assembling the cleaner
3. To pick up dust with maxi-
mum room concentration
values:
Insert the filter bag into the
dirt tank according to the
instructions (instructions in-
cluded).
To pick up harmless dust:
Insert the disposal bag (in-
structions included) into the
tank.
On delivery some of the accesso-
ries are lying in the tank and must
be removed before the vacuum
cleaner is used for the first time.
Remove the upper section of the
vacuum cleaner:
The mains plug should not be in-
serted into a socket.
IMPORTANT:
P r e s s
the filter bag connection
firmly on to the inlet fitting.
4. Fit the upper section of the
vacuum cleaner and close
the retaining clamps.
1. Open the retaining clamps
and lift off the upper section
of the cleaner.
2. Take the accessories out of
the dirt tank and the packag-
ing.
NOTE:
Ensure that the
retaining clamps fit properly.
4 Operation
4.1 Connections
4.1.1 Connecting the suction
hose
1. Connect the suction hose.
The suction hose diameter must
suit the position of the switch in
order to pick up dry, nonflammable
dust with maximum room concen-
tration values.
The operating voltage shown on the
rating plate must correspond to the
voltage of the mains power supply.
4.1.2 Electrical connection
1. Ensure that the vacuum
cleaner is switched off.
2. Insert the power cord into a
properly installed and fused
socket with an earthing con-
tact.
1) Option depending on model
5
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
To comply with regulations, only ap-
proved dust producing tools should
be connected.
The maximum power consumption
of the connected power tool is stat-
ed in section 9.4 “Technical data”.
4.1.3 Connecting electrical
1. Ensure that the electrical
appliance is switched off.
2. Connect the electrical appli-
ance to the appliance socket
on the control panel.
appliances
4.2 Switching on the
vacuum cleaner
1. Turn the switch to position
„I“.
4.2.1 Switch position “I”
The vacuum cleaner motor
starts.
0
2
3
3
2
6
7
0
0
The hose diameter and the setting
for the suction hose diameter must
be the same.
Hose
ø
Hose diameter
setting
ø27
ø32
ø36
ø50
ø27
ø32
ø36
ø50
Before switching the switch to position
„auto“, ensure that the tool connected
to the appliance socket is switched off.
4.2.2 Switch position „auto“
0
The hose diameter and the setting
for the suction hose diameter must
be the same.
2
3
3
2
6
7
0
1. Turn the switch to position
„auto“. The vacuum cleaner mo-
tor starts when the connected
appliance is switched on.
0
Hose
ø
Hose diameter
setting
ø27
ø32
ø36
ø50
ø27
ø32
ø36
ø50
2. When the power tool is switched
off the vacuum cleaner contin-
ues to run for a short moment
so that any dust in the suction
hose is conveyed to the safety
filter bag.
4.2.3 Suction power control
The motor speed and the suc-
tion power can be varied with
the suction power control. This
allows precise adaptation of
the suction power for different
cleaning tasks.
0
2
3
3
6
7
2
0
0
Before picking up dust with maxi-
mum room concentration values:
1. Check that all the filters are
present and properly fitted.
2. When the motor is running,
hold the suction hose shut.
An acoustic warning sounds
after approx. 1 second.
4.3 Check volume flow
monitor
1) Option depending on model
6
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
4.4 Acoustic warning
For safety reasons, an acoustic
warning sounds if the air speed
in the suction hose drops to be-
low 20 m/s. See section “Trou-
bleshooting”.
4.5 Cleaning the filter
element (ATTIX 360-2M)
0
x3
auto
I
1
2
If the acoustic signal sounds again
after repeated cleaning, replace the
filter element (see section 7.2.5).
Push & Clean
Filter Cleaning System
Only after picking up harmless dust
using the waste bag.
3. Press the button to start filter
cleaning three times. The re-
sulting stream of air removes
attached dust from the slats
of the filter elements.
If suction performance drops:
1. Set the suction power to
maximum.
2. Close the nozzles or suction
hose opening with the palm
of your hand.
4.6 Cleaning the filter
element (ATTIX 560-
2MXC/761-2MXC)
10 sec.
To ensure that suction perform-
ance is always at its best, the filter
element is automatically cleaned
during operation. We recommend
complete cleaning if the filter ele-
ment becomes extremely dirty.
After picking up harmless dust us-
ing the waste bag.
1. Switch off the vacuum clean-
er
2. Close the nozzles or suction
hose opening with the palm
of your hand.
3. Turn the switch to position „I“
and let the cleaner operate
for approx. 10 seconds with
the suction hose opening
closed.
1) Option depending on model
7
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
5 Applications and techniques
5.1 Techniques
If used correctly, additional ac- Effective cleaning is achieved if
cessories, suction nozzles and you follow just a few guidelines
suction hoses can enhance the in combination with your own
cleaning action and reduce the practical experience in special
cleaning effort.
fields.
Here are some basic tips.
5.1.1 Picking up dry
substances
The suction hose diameter must posal of the picked up material
suit the position of the switch in is then simple and hygienic.
order to pick up dry, nonflam-
mable dust with maximum room After picking up liquids, the filter
concentration values.
element is wet. A damp filter el-
There must always be a safety ement clogs more quickly when
filter bag in the tank before dry dry substances are picked up.
substances with maximum room For this reason the filter element
concentration values are picked should be washed and dried or
up. See section 9.5 “Accesso- replaced by a dry element be-
Do not pick up flammable
substances.
ries” for ordering number.
fore dry substances are picked
up.
To pick up harmless dust we
recommend the use of a waste Always use a filter bag/waste
bag. See section 9.5 “Accesso- bag that is suitable for the type
ries” for ordering number. Dis- of dust (see table):
ATTIX 360-2M
Type of dust
Filter bag/waste bag
Handling/waste disposal
•
Nonhazardous dust
Waste bag
No. 302000804
1. Thorough cleaning - see section 4.5.
2. Waste disposal - see section 7.2.1
Waste disposal - see section 7.2.2
•
•
Dust with MAC
values ≥ 0.1 mg/m³
wood dust
Filter bag
No. 302000449
Waste disposal - see section 7.2.2
ATTIX 550-2M
Type of dust
Filter bag/waste bag
Handling/waste disposal
•
Nonhazardous dust
Waste bag
Waste disposal - see section 7.2.1
ATTIX 550-2M: No. 302000728
ATTIX 751-2M: No. 302001480
•
•
Dust with MAC
values ≥ 0.1 mg/m³
wood dust
Filter bag
ATTIX 550-2M: No. 302000527
ATTIX 751-2M: No. 302001484
Waste disposal - see section 7.2.2
ATTIX 560-2MXC
Filter bag/waste bag
Waste bag
ATTIX 560-2MXC: No. 302000728 1. Remove hose with tool sleeve from
ATTIX 761-2MXC: No. 302001480 tool
Type of dust
Handling/waste disposal
Waste disposal:
•
•
Nonhazardous dust
Dust with MAC
values ≥ 0.1 mg/m³
Observe any ad-
ditional national
regulations
2. Thorough cleaning - see section 4.6
3. Waste disposal - see section 7.2.1
•
•
•
Dust with MAC
values ≥ 0.1 mg/m³
wood dust
Filter bag
ATTIX 560-2MXC: No. 302001138
ATTIX 761-2MXC: No. 302001484
Waste disposal - see section 7.2.2
1) Option depending on model
8
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
5.1.2 Picking up liquids
Before liquids are picked up, If foam appears, stop work im-
always remove the filter bag/ mediately and empty the tank.
waste bag and check that the
float (ATTIX 360-2M/550-2M/ To reduce the amount of foam,
751-2M) or the water level limit use foam killer Nilfisk-Alto Foam
(ATTIX 560-2MXC/761-2MXC) Stop (see section 9.5 „Accesso-
works properly. (See section ries“ for order number).
7.2.5 and 7.2.6 “Replacing the
filter element“.)
Do not pick up flammable
substances.
The use of a separate filter ele-
ment or filter screen is recom-
mended.
6 After finishing work
6.1 Switching the vacuum
cleaner off and storage
1. After picking up hazardous
dust, vacuum clean the out-
side of the cleaner.
2. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
3. Wind up the power cord and
hang it on the handle.
4. Empty the tank and clean the
vacuum cleaner.
5. After picking up liquids: Store
the upper section of the
cleaner separately so that
the filter element can dry.
6. Store the vacuum cleaner
in a dry room where it is
protected from unauthorized
use.
ATTIX 360-2M
ATTIX 751-2M
ATTIX 761-2MXC
ATTIX 550-2M
ATTIX 560-2MXC
1) Option depending on model
9
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
7 Maintenance
7.1 Maintenance plan
After finishing work
As required
7.2.1 Replacing the waste bag
7.2.2 Replacing the filter bag
7.2.3 Emptying dirt tank (ATTIX 3+5)
7.2.4 Emptying the dirt tank (ATTIX 7)
7.2.5 Replacing filter element
(ATTIX 360-2M/550-2M/751-2M)
7.2.6 Replacing filter element
(ATTIX 560-2MXC/761-2MXC)
7.2 Maintenance work
7.2.1 Replacing the waste
bag
ATTIX 360-2M/550-2M/
560-2MXC:
1
1. Open the retaining clamps and
remove the upper section of the
cleaner from the dirt tank.
2. Carefully remove the waste bag
connection (1) from the inlet fit-
ting.
2
3. Close the waste bag connection
with the slide (2).
4. Close the waste bag using the
cable binder (3).
When using ATTIX 360-2M/560-
2MXC/761-2MXC clean them tho-
roughly before replacing the waste
bag - see sections 4.5 bzw.4.6.
5. Dispose of the dirt in accordance
with legal regulations.
6. Insert a new filter bag into the
cleaned tank as described in the
instructions enclosed.
3
During the following work, ensu-
re that dust is not unnecessarily
spread around. Wear a P2 brea-
thing mask.
IMPORTANT: Press the filter bag
connection firmly on to the inlet
fitting.
ATTIX 751-2M/761-2MXC:
1. Remove the upper section of
cleaner from the dirt tank.
2. Open the retaining clamps (1)
and remove the intermediate ring
(2) from the tank.
3. Carefully remove the waste bag
connection from the inlet fitting.
4. Close the waste bag using the
cable binder (3).
2
1
1
3
5. Dispose of the dirt in accordance
with legal regulations.
6. Insert a new filter bag into the
cleaned tank as described in the
instructions enclosed.
IMPORTANT: Press the filter bag
connection firmly on to the inlet
fitting.
1) Option depending on model
10
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
7.2.2 Replacing the filter bag
1. Open the retaining clamps and
remove the upper section of the
cleaner from the dirt tank.
2. Carefully remove the filter bag
connection from the inlet fitting.
3. Close the filter bag connection
with the slide.
4. Dispose of the filter bag in ac-
cordance with legal regulations.
5. Place a new filter bag into the
cleaned tank as described in the
instructions (printed on the filter
bag)
During the following work, ensure
that dust is not unnecessarily
spread around. Wear a P2 breath-
ing mask.
IMPORTANT: Press the filter
bag connection on the inlet fit-
ting as far as possible.
7.2.3 Emptying dirt tank
(ATTIX 3+5)
1. Remove the upper section of
cleaner from the dirt tank.
2. Using one hand, take hold of the
dirt tank underneath and tip out
the dirt.
3. Dispose of the dirt in accordance
with legal regulations.
4. Clean the rim of the tank before
fitting the upper section of clea-
ner.
Before reinserting the suction hose:
5. Clean the inlet fitting and hose
collar.
Only after picking up harmless dust
without a filter bag.
7.2.4 Emptying the dirt tank (ATTIX 7)
1. Remove the upper section of
cleaner from the dirt tank.
2. Open the retaining clamps
(1) and remove the interme-
diate ring (2) from the tank.
3. Pull the lever in the handle
(3) upwards and tilt the tank.
4. Tip out the collected dirt.
5. Dispose of the dirt in accord-
ance with legal regulations.
or:
3. Open the tank locks (4).
4. Use the handles (5) to lift the
tank out of the frame.
5. Tip out the collected dirt.
6. Place the empty tank in the
frame and close the locks
(4).
2
1
1
3
Only after picking up
harmless dust with-
out a filter bag.
5
4
To empty the dirt
tank after picking
up liquids: remove
4
7. Dispose of the dirt in accord-
ance with legal regulations.
5
the intermediate ring as a proper
seal is only ensured during suction.
After emptying the tank: clean the
rim of the tank and the seals in the
intermediate ring and the upper
section of cleaner before refitting
them.
be reduced.
Before reinserting the suction hose:
clean the inlet fitting and hose collar.
If the seal or groove is dirty or dam-
aged, the suction performance will
1) Option depending on model
11
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
7.2.5 Replacing filter element
1. Open the retaining clamps
and remove the upper section
of the cleaner from the dirt
tank. Lay the upper section of
the cleaner down with the filter
element facing upwards.
(ATTIX 360-2M/550-2M/
751-2M)
2. Turn the filter holder anticlock-
wise (1) and remove it (2).
3. Place the protective filter bag1)
over the filter element (3).
4. Carefully remove the filter ele-
ment and close the protective
filter bag with a knot.
During the following work, ensure
that dust is not unnecessarily
spread around. Wear a P2 breath-
ing mask.
5. Clean the filter seal (4). Check
it for damage and replace it if
necessary.
3
1
6. Check the antistatic clamp (5)
for damage and have it re-
placed by Nilfisk-Alto Service
if necessary.
2
7. Fit a new filter element.
8. Check that the float (6) works
properly.When the filter holder
is turned, the float inside must
move about easily.
4
9. Fit the filter holder and turn it
clockwise to secure it firmly.
10.Dispose of the used filter ele-
ment in accordance with legal
regulations.
1
6
2
5
Never use the vacuum cleaner
without a filter.
1. Open the retaining clamps
and remove the upper sec-
tion of the cleaner from
the dirt tank. Lay the upper
section of the cleaner down
with the filter element facing
upwards. Do not place the
upper section of the cleaner
on the guard (1) and do not
damage the filter element.
2. Open the bar handle (2) and
remove it.
3. Remove the filter holder (3).
4. Place the protective filter
bag 1) over the filter element.
5. Carefully remove the filter
element and close the pro-
tective filter bag with a knot.
6. Clean the filter seal (4).
Check it for damage and
replace it if necessary.
7.2.6 Replacing filter element
(ATTIX 560-2MXC/
761-2MXC)
During the following work, ensure
that dust is not unnecessarily
spread around. Wear a P2 breath-
ing mask.
1
3
2
4
1) Accessory. Order No. shown in section 9.5.
1) Option depending on model
12
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
7. Check the antistatic clamp
(5) for damage and have it
replaced by Nilfisk-Alto Serv-
ice if necessary.
6
8. Check that the control flap
(6) for filter cleaning works
properly. The control flap
should move back and for-
wards easily.
9. Clean the level hose (7).
10.Fit a new filter element.
11.Fit the filter holder. Ensure
that it is in the correct posi-
tion.
5
7
12.Fit bar and close bar handle.
13.Dispose of the used filter
element in accordance with
legal regulations.
Never use the vacuum cleaner
without a filter.
8 Troubleshooting
Fault
Cause
Remedy
‡
Motor does not start
>
>
Fuse of the mains socket has
blown.
•
•
Connect mains fuse.
Overload protection switch
has tripped.
Switch off the vacuum cleaner
and allow it to cool for approx.
5 minutes. If the cleaner can-
not be started again, contact
the Nilfisk-Alto service depart-
ment.
>
>
Self-acting carbon brush is
worn.
•
•
Have carbon brushes changed
by Nilfisk-Alto Service.
‡
‡
Motor does not run in auto-
matic mode
Power tool is defective or not
connected properly.
Check that the power tool
works or that the plug is in-
serted correctly.
>
>
The power rating of the elec-
trical tool is too low.
•
•
Note that minimum power rat-
ing is P>40W
The acoustic warning
sounds. (Reduced suction
power)
Suction power selected with
suction power control is too
low.
Set suction power in accord-
ance with section 4.2.3. „Set-
ting suction power“.
>
Hose diameter and switch
position do not correspond.
•
Set correct switch position for
hose diameter.
>
>
Clogged suction hose/nozzle.
Filter bag is full.
•
•
Clean suction hose/nozzle
See section 7.2.2 „Replacing
filter bag“.
1) Accessory. Order No. shown in section 9.5.
1) Option depending on model
13
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
Fault
Cause
Remedy
‡
The acoustic warning
sounds. (Reduced suction
power)
>
>
Filter element is clogged.
•
•
See section 4.5/4.6 „Cleaning
filter element“ and 7.2.5/7.2.6
„Replacing filter element“.
ATTIX 560-2MXC/761-2MXC
Contact Nilfisk-Alto Service
only:
Defective cleaning mecha-
nism
‡
‡
No suction power during
wet cleaning
>
>
Tank is full. (Float does not
close the suction opening).
•
•
Switch off the cleaner. Empty
the tank.
The vacuum cleaner
switches off during wet
cleaning
Tank is full.
Switch off the cleaner. Empty
the tank.
‡
Voltage fluctuations
>
Impedance of power supply is
too high.
•
Connect the cleaner to an-
other socket closer to the fuse
box. Voltage fluctuations over
7% should not occur if the im-
pedance at the transfer point
is ≤ 0.15 Ω .
9 Further information
9.1 Recycling the vacuum
cleaner
Make the old cleaner unusable and electronic appliances, used
immediately. electrical goods must be col-
1. Unplug the cleaner and cut lected separately and recycled
the power cord. ecologically.
Do not discard of electrical ap- Contact your local authorities or
pliances with household waste.
your nearest dealer for further
information.
As specified in European Direc-
tive 2002/96/EC on old electrical
9.2 Guarantee
Our general conditions of busi-
ness are applicable with regard
to the guarantee. Subject to
change as a result of technical
advances.
9.3 Tests and approvals
The vacuum cleaners have been A dust test must be performed
tested as specified in IEC/EN at least once every year by the
60335-2-69 including appendix manufacturer or a trained per-
AA. All the requirements were son. This test covers, for exam-
fulfilled for equipment in dust ple, whether there is damage to
class M.
the filter, the vacuum cleaner is
sealed to the air and the control
The vacuum cleaners must be equipment works properly.
inspected regularly in accord-
ance with national accident pre-
vention regulations (in Germany
as specified in BGV A2 and DIN
VDE 0701 Part 1 and Part 3, at
regular intervals and after re-
pairs or modifications).
1) Option depending on model
14
ATTIX 360-2M
ATTIX 550-2M / ATTIX 560-2MXC
ATTIX 751-2M / ATTIX 761-2MXC
english
9.4 Technical data
ATTIX
360-2M
550-2M
560-2MXC 751-2M
761-2MXC
EU
GB
GB
230/240V
GB
110V
EU
EU
EU
EU
230/240V
Voltage
V
230
230/240
230
230/240
110
230
230
230
Mains frequency
Fuse
Hz
A
50/60
16
13
16
13
16
16
16
16
Power consumption
W
1200
Connected load for
appliance socket
W
2400
3600
1800
3000
2400
3600
1800
3000
560
2400
3600
2400
3600
2400
3600
Total connected load
Volume flow (air)
W
1760
3600
23000
l/min
Pa
Negative pressure
Measurement area sound
pressure level at a distance of dB(A)
1 m, EN 60704-1
62
59
60
57
Operating noise
dB(A)
m
Power cord: Length
7,5
10.0
7,5
10.0
7,5
7,5
7,5
7,5
H07BQ-
F3G1,5
H05RR-
F3G1,5
H05RR- F3G1,5
H05RR- F3G1,5
Power cord: Length
Protection class
I
Type of protection
(splash water protec-
ted)
IP X4
Radio interference
level
EN 55014-1
Tank volume
Width
l
27
380
390
570
10
45
476
506
655
14
70
mm
mm
mm
kg
580
605
970
Depth
Height
Weight
25
27
Suction hose diameter
mm
Minimum air flow volume
l/min
Associated negative pressure
between suction hose/tool
Pa
27
32
36
50
690
970
16300
15700
14200
7800
1220
2360
9.6 EC declaration of conformity
EC declaration of conformity
9.5 Accessories
Description
Order No.
360-2M
302000449 302000527 302001138
302000804 302000728
302000461 302000726
302000606 302000525
550-2M
560-2MXC
Filter bag (5 pcs.)
Waste bag (5 pcs.)
Filter element
Alto Deutschland GmbH
Guido-Oberdorfer-Straße 2-8
D-89287 Bellenberg
Cloth insert filter
Product:
Model:
Vacuum cleaner for wet and dry operation
ATTIX 360-2M/550-2M/560-2MXC
ATTIX 751-2M/761-2MXC
751-2M
302001484
302001480
302000461
302000525
761-2MXC
Filter bag (5 pcs.)
Waste bag (5 pcs.)
Filter element
Description:
110/230-240 V~, 50/60 Hz, 1200 W, Dust class M
The design of the appliance
corresponds to the following
pertinent regulations:
EC Machine Directive 98/37/EC
EC Low Voltage Directive 73/23/EC
EC EMC Directive 89/336/EC
302000726
Cloth insert filter
Applied harmonized standards:
EN 12100-1, EN 12100-2
EN 60335-1
EN 60335-2-69
EN 55014-1, EN 55014-2, EN 61000-3-2
360-2M / 550-2M / 560-2MXC
751-2M / 761-2MXC
Applied national standards and
technical specifications:
DIN EN 60335-1
DIN EN 60335-2-69
Protective filter bag
(10 pcs.)
30082
15475
8469
Filter screen
Dipl.-Ing. Wolfgang Nieuwkamp
Tests and approvals
Nilfisk-Alto-Foam-
Stop (6 x 1 l)
Bellenberg, 22.10.2004
1) Option depending on model
15
).4%2.%4
&2!.#%
3,/6%.)!
HTTPꢀꢁꢁWWWꢂNILlSKꢃALTOꢂCOM
!,4/ &RANCE 3ꢂ!ꢂ
7AP !,4/ :ISTILNI SISTEMIꢏ DꢂOꢂOꢂ
!ÏROPARC ꢌ
,ETALIÝKA ꢊꢊ
(%!$15!24%2
.ILFISKꢃ!DVANCE 'ROUP
3OGNEVEJ ꢄꢅ
ꢄꢆꢇꢅ "R’NDBY
$ENMARK
4ELꢂꢀ ꢈꢉꢅ ꢉꢊꢄꢊ ꢋꢌꢇꢇ
ꢌꢎ 2UE )CARE
3,/ꢃꢌꢌꢌꢇ ,JUBLJANA
4ELꢂꢀ ꢈꢊꢆꢋ ꢌꢅ ꢄꢇ ꢆꢄ ꢇꢇ
&AXꢀ ꢈꢊꢆꢋ ꢌꢅ ꢄꢇ ꢆꢄ ꢌꢇ
%ꢃMAILꢀ WAPꢂPRODAJA SIOLꢂNET
&ꢃ ꢆꢍꢎꢆꢇ %NTZHEIM
4ELꢂꢀ ꢈꢊꢊ ꢊ ꢋꢋ ꢄꢋ ꢋꢉ ꢇꢇ
&AXꢀ ꢈꢊꢊ ꢊ ꢋꢋ ꢊꢇ ꢇꢅ ꢇꢇ
%ꢃMAILꢀ INFO NILlSKꢃALTOꢂFR
7EBꢀ WWWꢂNILlSKꢃALTOꢂCOM
3,/7!+)!
7AP !,4/ :ISTIACE SYSTÏMY SꢂRꢂOꢂ
!5342!,)!
'%2-!.9
2EMESELNÓCKA ꢉꢄ
.ILlSKꢃ!DVANCE !'
ꢋꢊꢌꢇꢆ "RATISLAVAꢃ2A:A
4ELꢂꢀ ꢈꢉꢄꢌ ꢄ ꢉꢉ ꢋꢋꢌ ꢉꢇꢄꢁꢉꢇꢅ
&AXꢀ ꢈꢉꢄꢌ ꢄ ꢉꢉ ꢋꢋꢌ ꢊꢎꢅ
%ꢃMAILꢀ WAP GTINETꢂSK
7EBꢀ WWWꢂWAPꢃALTOꢂSK
.ILFISKꢃ!,4/
ꢉꢋ %GERTON 3Tꢂ
3ILVERWATER .37 ꢄꢌꢄꢋ
4ELꢂꢀ ꢈꢆꢌ ꢄ ꢋꢍꢉꢋ ꢅꢎꢆꢆ
&AXꢀ ꢈꢆꢌ ꢄ ꢋꢍꢉꢋ ꢅꢎꢆꢇ
'ESCHÊFTSBEREICH .ILlSKꢃ!,4/
'UIDOꢃ/BERDORFERꢃ3TRA”E ꢌꢇ
ꢋꢎꢄꢋꢍ "ELLENBERG
4ELꢂꢀ ꢈꢉꢎ ꢇꢌꢋꢇ ꢅ ꢊꢍ ꢊꢍ ꢊꢍ
&AXꢀ ꢈꢉꢎ ꢇꢌꢋꢇ ꢅ ꢊꢍ ꢊꢍ ꢊꢋ
%ꢃMAILꢀ INFO NILlSKꢃALTOꢂDE
7EBꢀ WWWꢂNILlSKꢃALTOꢂDE
30!).
.ILFISKꢃ!,4/
$IVISION OF .ILFISKꢃ!,4/ 3ꢂ!ꢂ
4ORRE $@!RA
0ASEO DEL 2ENGLEꢏ ꢅ 0Lꢂ ꢌꢇ
%ꢃꢇꢋꢊꢇꢄ -ATARØ "ARCELONA
4ELꢂꢀ ꢈꢊꢉ ꢎꢊ ꢍꢉꢌ ꢄꢉ ꢇꢇ
&AXꢀ ꢈꢊꢉ ꢎꢊ ꢍꢅꢍ ꢋꢇ ꢄꢇ
%ꢃMAILꢀ INFO NILlSKꢃALTOꢂES
7EBꢀ WWWꢂNILlSKꢃALTOꢂCOM
!5342)!
!,4/ ½STERREICH 'MB(
-ETZGERSTRꢂ ꢆꢋ
ꢅꢌꢇꢌ "ERGHEIMꢁ3ALZBURG
4ELꢂꢀ ꢈꢉꢊ ꢆꢆꢄꢉ ꢅ ꢆꢉ ꢇꢇꢃꢌꢌ
&AXꢀ ꢈꢉꢊ ꢆꢆꢄꢉ ꢅ ꢆꢉ ꢇꢇꢃꢊꢉ
%ꢃMAILꢀ INFO NILlSKꢃALTOꢂAT
'2%!4 "2)4!).
.ILFISKꢃ!,4/
$IVISION OF .ILFISKꢃ!DVANCE ,TDꢂ
"OWERBANK 7AY
'ILWILLY )NDUSTRIAL %STATE
5+ꢃ0ENRITHꢏ #UMBRIA #! ꢌꢌ ꢎ"1
4ELꢂꢀ ꢈꢉꢉ ꢌꢍꢆꢋ ꢋꢆ ꢋꢎ ꢎꢅ
&AXꢀ ꢈꢉꢉ ꢌꢍꢆꢋ ꢋꢆ ꢉꢍ ꢌꢊ
%ꢃMAILꢀ SALES NILFISKꢃALTOꢂCOꢂUK
7EBꢀ WWWꢂNILFISKꢃALTOꢂCOꢂUK
7EBꢀ WWWꢂNILlSKꢃALTOꢂAT
"2!:),
7AP DO "RASIL ,TDAꢂ
37%$%.
!,4/ 3VERIGE !"
2UA ꢄꢅ DE !GOSTOꢏ ꢆꢇꢋ
ꢋꢊꢊꢄꢊꢃꢄꢆꢇ 0INHAISꢁ0ARANÈ
4ELꢂꢀ ꢈꢅꢅ ꢉ ꢌꢄ ꢌꢇ ꢆꢍ ꢉꢇ ꢇ
&AXꢀ ꢈꢅꢅ ꢉ ꢌꢄ ꢌꢇ ꢆꢍ ꢉꢇ ꢊ
%ꢃMAILꢀ EXPORT WAPDOBRASILꢂCOMꢂBR
!MINOGATAN ꢌꢋꢏ "/8 ꢉꢇꢄꢎ
ꢉꢊꢌ ꢇꢉ -ÚLNDAL
4ELꢂꢀ ꢈꢉꢆ ꢊ ꢌꢍ ꢇꢆ ꢍꢊ ꢇꢇ
&AXꢀ ꢈꢉꢆ ꢊ ꢌꢍ ꢇꢆ ꢍꢊ ꢉꢌ
%ꢃMAILꢀ INFO NILlSKꢃALTOꢂSE
7EBꢀ WWWꢂNILlSKꢃALTOꢂSE
-!,!93)!
!,4/ $%.ꢃ3). -ALAYSIA 3DN "HD
3$ ꢌꢉꢏ *ALAN +)0 ꢌꢌꢏ 4AMAN
0ERINDUSTRIAN +)0ꢏ 32) $AMANSARA
ꢅꢄꢄꢇꢇ +UALA ,UMPUR
#!.!$!
!,4/ #ANADA
-ALAYSIA
ꢄꢉ #ONSTELLATION 2OAD
2EXDALE
/NTARIO -ꢎ7 ꢌ+ꢌ
4ELꢂꢀ ꢈꢌ ꢉꢌꢆ ꢆ ꢍꢅ ꢅꢋ ꢊꢇ
&AXꢀ ꢈꢌ ꢉꢌꢆ ꢆ ꢍꢅ ꢆꢎ ꢋꢎ
4ELꢂꢀ ꢈꢆꢇꢊ ꢆꢄꢍ ꢉ ꢆ ꢎꢌꢊ
&AXꢀ ꢈꢆꢇꢊ ꢆꢄꢍ ꢉ ꢆ ꢊꢌꢋ
%ꢃMAILꢀ DENSIN TMꢂNETꢂMY
53!
!,4/ #LEANING 3YSTEMSꢏ )NCꢂ
0ART OF THE .ILFISKꢃ!DVANCE 'ROUP
ꢌꢄꢄꢉꢎ .ATIONS &ORD 2OAD
ꢄꢋꢌꢊꢉ 0INEVILLE
.%4(%2,!.$3
!,4/ .EDERLAND "6
(OUTSCHELF ꢍ
4ELꢂꢀ ꢈꢌ ꢍꢇꢉ ꢎꢍꢌ ꢌꢄꢉꢇ
&AXꢀ ꢈꢌ ꢍꢇꢉ ꢎꢍꢌ ꢌꢄꢉꢌ
%ꢃMAILꢀ INFO ALTOCSIꢂCOM
7EBꢀ WWWꢂNILlSKꢃALTOꢂCOM
#2/!4)!
7AP !,4/ 3TROJEVI ZA :IÝ9ENJEꢏ DꢂOꢂOꢂ
3IGET ꢌꢋA
ꢌꢇꢇꢄꢇ :AGREB
4ELꢂꢀ ꢈꢊꢋꢅ ꢌ ꢆꢅ ꢅꢉ ꢌꢉꢉ
&AXꢀ ꢈꢊꢋꢅ ꢌ ꢆꢅ ꢅꢉ ꢌꢌꢄ
%ꢃMAILꢀ ADMINꢂWAP WAPꢃSISTEMIꢂHR
.,ꢃꢊꢊꢍꢌ +" (ARDINXVELDꢃ'IESSENDAM
4ELꢂꢀ ꢈꢊꢌ ꢌꢋꢉ ꢆꢍꢍ ꢄꢇꢇ
&AXꢀ ꢈꢊꢌ ꢌꢋꢉ ꢆꢍꢍ ꢄꢇꢌ
%ꢃMAILꢀ INFO NILlSKꢃALTOꢂNL
7EBꢀ WWWꢂNILlSKꢃALTOꢂNL
.%7 :%!,!.$
#:%#( 2%05",)#
!,4/ #ESKÈ 2EPUBLIKA SꢂRꢂOꢂ
:ATECKâCH ꢎ
!,4/ /VERSEAS )NCꢂ
ꢅ! 4ARNDALE 'ROVE
!LBANY !UCKLAND
4ELꢂꢀ ꢈꢆꢉ ꢎ ꢉꢌꢉ ꢉꢅꢄꢇ
&AXꢀ ꢈꢆꢉ ꢎ ꢉꢌꢉ ꢉꢅꢄꢌ
%ꢃMAILꢀ ALTONZ IHUGꢂCOꢂNZ
ꢌꢉꢇꢇꢇ 0RAHA ꢉ
4ELꢂꢀ ꢈꢉꢄꢇ ꢄ ꢉꢌ ꢉꢇ ꢋꢉ ꢌꢎ
&AXꢀ ꢈꢉꢄꢇ ꢄ ꢉꢌ ꢉꢇ ꢋꢉ ꢊꢎ
%ꢃMAILꢀ WAP?P MBOXꢂVOLꢂCZ
7EBꢀ WWWꢂWAPꢃALTOꢂCZ
./27!9
!,4/ .ORGE !ꢁ3
"J’RNERUDVEIEN ꢄꢉ
ꢌꢄꢆꢆ /SLO
4ELꢂꢀ ꢈꢉꢍ ꢄꢄ ꢍꢅ ꢌꢍ ꢍꢇ
&AXꢀ ꢈꢉꢍ ꢄꢄ ꢍꢅ ꢌꢍ ꢍꢌ
%ꢃMAILꢀ INFO NILlSKꢃALTOꢂNO
$%.-!2+
!,4/ $ANMARK !ꢁ3
)NDUSTRIVEJ ꢌ
ꢎꢅꢆꢇ (ADSUND
4ELꢂꢀ ꢈꢉꢅ ꢍꢄꢌꢋ ꢄꢌ ꢇꢇ
&AXꢀ ꢈꢉꢅ ꢍꢄꢌꢋ ꢄꢌ ꢌꢌ
%ꢃMAILꢀ SALG NILlSKꢃALTOꢂDK
SERVICE NILlSKꢃALTOꢂDK
7EBꢀ WWWꢂNILlSKꢃALTOꢂDK
3).'!0/2%
!,4/ $%.ꢃ3). 3INGAPORE 0TE ,TDꢂ
.Oꢂ ꢌꢍ ,INK 2OAD
3INGAPORE ꢆꢌꢎꢇꢊꢉ
4ELꢂꢀ ꢈꢆꢅ ꢆꢄ ꢆꢋ ꢌꢇ ꢇꢆ
&AXꢀ ꢈꢆꢅ ꢆꢄ ꢆꢋ ꢉꢎ ꢌꢆ
%ꢃMAILꢀ DENSIN SINGNETꢂCOMꢂSG
7EBꢀ WWWꢂDENSINꢂCOM
|