New Holland
TN-A Series Tractor Specifications
TN60A/TN60DA TN70A/TN70DA TN75A/TN75DA/TN75SA TN85A/TN85DA TN95A/TN95DA
TN60A
TN60DA
TN70A
TN70DA
TN75A
TN75DA
TN75SA
TN85A
TN85DA
TN95A
TN95DA
MODEL
ENGINE
Gross engine hp (kW)*
PTO hp (kW)*
57 (42.5)
45 (33.6)
70 (52.2)
57 (42.5)
75 (55.9)
62 (46.3)
80 (59.7)
69 (51.5)
90 (67.1)
77 (57.4)
Cylinders
Aspiration
Displacement, cu. in. (L)
Rated speed, rpm
Maximum Torque, ft.-lbs. (Nm)
...........................................................3........................................................... ......................................4......................................
Natural
Turbocharged
Turbocharged
Natural
Turbocharged
....................................................179 (2.9) .................................................... ...............................274 (4.5) ...............................
.................................................................................................2300 .................................................................................................
159 @ 1400 rpm
(216 @ 1400 rpm)
26
213 @ 1400 rpm
(289 @ 1400 rpm)
32
220 @ 1400 rpm
(298 @ 1400 rpm)
36
236 @ 1400 rpm
(320 @ 1400 rpm)
32
269 @ 1400 rpm
(365 @ 1400 rpm)
37
Engine torque rise, %
Fuel capacity, gal. (L)
................................23 (87) on TN-A Standard models ................................ ...............................23.5 (89) ...............................
...............................19.5 (74) TNS-A and TND-A models...............................
*mfg’s estimate
TRANSMISSIONS
Choice of transmission
• 8 x 8 constant mesh transmission with synchronized mechanical shuttle (available on select TN-A models only)
• 12 x 12 Synchro Command™ transmission with synchronized mechanical shuttle (available on TN-A models only)
• 12 x 12 Synchro Command™ transmission with power shuttle (available on TN95A and TN95DA)
• 16 x 16 Synchro Command™ transmission with your choice of synchronized mechanical or electro-hydraulic, no-clutch power shuttle (Except TN95A and TN95DA)
TRACTION CLUTCH
w/ mechanical shuttle, in. (mm)
11 (280)
........................................................................11 (280)........................................................................
............................................................. Dry cerametallic plate.............................................................
Dry organic plate
w/ electro-hydraulic power shuttle, in. (mm) ............................................................................Six 5.2 (113) wet organic plates............................................................................
Differential lock (front/rear)
.....................Limited slip, mechanically engaged (electro-hydraulically engaged on TN75SA SuperSteer™ models).....................
ELECTRICAL
Alternator (amps)
Less cab
..........................................................65.......................................................... ....................................120....................................
..........................................................85.......................................................... ....................................120....................................
..................................................................................................730 ..................................................................................................
With cab
Cold cranking amps
BRAKES
Type
Parking brake
...............................................................................Wet, two disc, self-adjusting...............................................................................
..........................................................................Independent, four 3.5 in. wet disc ..........................................................................
INDEPENDENT PTO
Speed
PTO clutch, in. (mm)
..................................................................................................540 ..................................................................................................
.............................................................................11 (280) dry cerametallic plate.............................................................................
HYDRAULICS
Pump type
..................................................................................................Gear..................................................................................................
............................................................................................Open center............................................................................................
............................................................................................2755 (190) ............................................................................................
System
Nominal system pressure, PSI (bar)
Standard pump flow, gpm (lpm)
Optional pump flow, gpm (lpm)
12.8 (48)
16.9 (64)
12.8 (48)
16.9 (64)
16.9 (64)
NA
15.0 (56.9)
NA
15.0 (56.9)
NA
STEERING SYSTEM
Steering Pump Type
..................................................................................................Gear..................................................................................................
provides flow for power steering, FWD engagement, differential lock engagement and lubricating the transmission
Pump flow, gpm (lpm)
with mechanical shuttle
with power shuttle
....................................7.4 (28.0).................................... .........................................9.4 (35.6)...................................................
.............................................................................................9.4 (35.6) .............................................................................................
Page 1of 3
New Holland
TN-A Series Tractor Specifications
TN60A/TN60DA TN70A/TN70DA TN75A/TN75DA/TN75SA TN85A/TN85DA TN95A/TN95DA
OPTIONAL EQUIPMENT
• Second rear remote valve
(lever controlled)
• Back up alarm wiring kit
• Special tires
• 4 pin power outlet (25 amp) electrical
plug
• Blue fiberglass canopy
• Front fenders for FWD front axle
• White fiberglass canopy
• Seat armrests
• Third rear remote valve
(lever controlled)
• 7 pin implement (trailer) electrical
plug
• Fixed external mirrors (cab only)
• Rear wheel weights
• Fourth rear remote valve (lever
controlled — available on TND-A and
TN75SA models when a mid-mount
valve is not installed)
• Horn
• Telescoping external mirrors
(cab only)
• Hydraulic filter protection kit
• Single pin male 8 amp electrical plug
• Horizontal exhaust kit
• Steel FOPS canopy
• Front weight bracket kit
• Grill guard
• Drawbar clevis
• Rotary beacon (cab only)
• Engine block heater
• 88 lb. front weights
• Mid-mount valve with joystick control
• Offset drawbar for Galaxy turf
Design, materials and/or specifications are subject to
change without notice and without liability therefor.
Specifications are applicable to units sold in Canada, the
United States, its territories and possessions, and may
vary outside these areas.
Safety begins with a thorough understanding of
the equipment. Always make sure you and
your operators read the Operator’s Manual
before using the equipment. Pay close
attention to all safety and operating
decals and never operate machinery
without all shields, protective devices
and structures in place.
© 2006 CNH America LLC
New Holland is a registered trademark of CNH America LLC.
Page 3 of 3
|