®
Controls and Connections
Channel
PERFORMANCE MULTI-ROOM VIDEO
Multi-room Video Distribution System
Installation Manual
Model 3515 - Modulator section
model 3515 integrated modulator
&
distribution system
pll frequency control
IN
POWER
15VDC
300mA
OUT
pwr
IR
OUTPUT
AUDIO
VIDEO
IR
model 3515 integrated modulator & distribution system
pwr
IR
pll frequency control
For use with model
2133 IR targets
Model 3515 - RF section
For use with model
2133 IR targets
Model 3515
This device complies with the FCC's Part 15 Rules for TV
interface devices. Any change or modification to this device
without the permission of Multiplex Technology, Inc. may
void the user's authority to operate this equipment.
Programming the model 3515 by computer:
®
3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.
2
Valid Channels:
14-64: UHF channels
65-125: CATV channels
95-99: not valid
Things to watch for:
Channel Spacing:
Skip at least one number between the
modulator channel and broadcast channels.
Channels 14 and 16: OK.
Channels 14 and 15: Illegal.
Error indication:
If an error has occurred or an incorrect channel is
entered, the LED will flash quickly for a second and
return to the previous settings.
Channel number
readback:
A readback mode will display the current channel
assignments.
To read-back modulator channel assignment
(example: 3515 has been programmed to channel 108)
model 3515 integrated modulator
&
distribution system
pll frequency control
pwr
IR
Hold program button
down while applying power
IR
pwr
Led blinks 1 time & pauses
IR
pwr
Led blinks 10 times & pauses
(“10” is read back as 0)
IR
pwr
Led blinks 8 times
IR
pwr
5
6
Changing modulation standards
Cable HRC and IRC considerations
Warranty
Common questions
Multiplex Technology, Inc. warrants this product to be free
from defects in materials and workmanship for a period of
one year from the date of purchase or MTI will repair, or at
its option, replace the defective product. To obtain
warranty service, call MTI for a return material
authorization (RMA) number and return the product
prepaid to Multiplex Technology, Inc., 3001 Enterprise
Street, Brea, CA 92821, Attention: Customer Service.
Please put the RMA number on the outside of the carton.
Any implied warranty arising from the sale of the product
including implied warranties of merchantability and fitness
for purpose are limited to the warranty stated above. MTI
shall not be responsible for losses or damages or
expenses, whether direct, consequential or incidental
arising from the use of or the inability to use this product.
Some states do not allow limitations on how long the
implied warranty lasts or the exclusion or limitation or
incidental or consequential damages, so the above
limitations and exclusions may not apply to you. This
warranty gives you specific legal rights, and you may have
other rights which may vary from state to state.
Specifications: typical @ 25 C ± 5 C
3515
Multiplex Technology, Inc., Brea, CA 92821
600-108
7
|