Lexmark Copier X642 User Manual

cover.  
Clearing jams  
Lexmark™ X642  
Clearing Jams  
Guide  
Understanding jam messages  
Message  
What to do*  
200 and 201  
Paper Jam  
Remove  
Open the bottom then top front  
covers, remove the print cartridge,  
and then remove the jam.  
Avoiding jams  
The following hints can help you avoid jams:  
Cartridge  
202 Paper Jam  
Open the rear door on the MFP, and  
Use only recommended print media.  
Do not overload the print media sources. Make  
sure the stack height does not exceed the  
maximum height indicated by the stack line on  
the labels in the sources.  
Do not load wrinkled, creased, damp, or curled  
print media.  
Flex, fan, and straighten print media before you  
load it. If jams do occur with print media, try  
feeding one sheet at a time through the  
multipurpose feeder.  
Do not use print media that you have cut or  
trimmed yourself.  
Do not mix print media sizes, weights, or types  
in the same print media source.  
Make sure the recommended print side is  
loaded in the source according to your simplex  
or duplex needs.  
Keep print media stored in an acceptable  
environment.  
Open Rear Door remove the jam.  
23x Paper Jam  
Check Duplex  
Remove the duplex tray from the  
3 Lift and pull the print cartridge out of the MFP.  
duplex unit, raise the duplex  
deflector, and remove the jam. Open  
the rear duplex door, and remove the  
jam.  
24x Paper Jam  
Check Tray <x> jammed media.  
Open each tray, and remove any  
250 Paper Jam  
Check MP  
Feeder  
Remove all media from the  
multipurpose feeder, flex and stack  
the media, reload the multipurpose  
feeder, and adjust the guide.  
290, 291, 292,  
and 294  
Scanner Jams  
Remove all original documents from  
the ADF. Open the ADF cover, and  
remove any jammed pages. Open  
the document cover, and remove any  
jammed pages. Open the scan unit  
access door, and remove any  
jammed pages.  
Warning: Do not touch the  
photoconductor drum on the  
underside of the cartridge.  
Use the cartridge handle  
whenever you are holding  
the cartridge.  
* After clearing the jam, press  
to resume printing.  
Do not remove trays during a print job.  
Push all trays in firmly after loading them.  
Make sure the guides in the trays are properly  
positioned for the size of print media you have  
loaded. Make sure the guides are not placed  
too tightly against the stack of print media.  
200 and 201 Paper Jam Remove  
Cartridge  
1 Push the release latch, and lower the  
4 Place the print cartridge aside.  
multipurpose feeder.  
Note: Do not leave the cartridge exposed  
2 Push the release latch, and open the top front  
to light for extended periods.  
Note: The print media may be covered  
with unfused toner, which may stain  
garments and skin.  
5 Pull the print media up and toward you.  
Warning: If the print media does not  
move immediately when you  
 
2 Remove the jammed media.  
3 Open any optional trays beginning at the top,  
23x and 24x jams  
and remove any jammed media.  
1 Open the MFP paper tray, and remove any  
jammed media.  
Depending on the media location, pull the  
media either up or down.  
3 Close the duplex rear door. Make sure it snaps  
2 Open the duplex tray.  
into place.  
Pull the print media either up or down. If it does  
not pull easily one way, try the other way  
4 If you have an optional 2000-sheet feeder, open  
the front door, press the elevator button to lower  
the tray, remove the jam, and make sure the  
stack of print media is neat and aligned.  
Elevator button  
4 Touch Continue.  
To remove the media, pull up.  
5 Touch Continue.  
 
a Lift the envelope feeder out of the MFP, and  
2 Open the ADF cover, and remove any jammed  
250 Paper Jam Check MP Feeder  
then set it aside.  
pages.  
1 Remove the paper from the multipurpose  
b Remove the envelope from the MFP.  
feeder.  
Note: If you cannot remove the envelope,  
the print cartridge will have to be  
removed.  
2 Flex, fan, and restack the media, and place it  
into the multipurpose feeder.  
3 Load the print media.  
3 Reinstall the envelope feeder. Make sure it  
4 Slide the side guide toward the inside of the tray  
until it lightly rests against the edge of the  
media.  
snaps into place.  
1
2
3
4
5
4 Flex and stack the envelopes.  
6
7
8
9
0
#
5 Load the envelope feeder.  
3 Open the document cover, and remove any  
jammed pages.  
5 Touch Continue.  
260 Paper Jam Check Env Feeder  
6 Adjust the guide.  
7 Lower the envelope weight.  
The envelope feeder feeds envelopes from the  
bottom of the stack; the bottom envelope will be  
the one that is jammed.  
1 Lift the envelope weight.  
2 Remove all envelopes.  
4 Open the scan unit access door, and remove  
any jammed pages.  
2
1
1
8 Touch Continue.  
2
Clearing ADF Jams  
If the jammed envelope has entered the MFP  
and cannot be pulled out, remove the envelope  
feeder.  
5 Close the scan unit access door.  
6 Close the ADF cover.  
290, 291, 292, and 294 Scanner Jams  
1 Remove all original documents from the ADF.  
 

Krups Coffeemaker XP4050 User Manual
Life Fitness Elliptical Trainer 95X ALLxx xx User Manual
LST Smoke Alarm 5351TE User Manual
Lucent Technologies Answering Machine 585 322 705 User Manual
Madrigal Imaging Stereo Amplifier Dual Monaural Power Amplifier User Manual
Magnavox Blu ray Player MBP5220F User Manual
Magnavox DVD VCR Combo GDV228MG9 User Manual
Melissa Kitchen Utensil 246 006 User Manual
Metz Flat Panel Television 37 TC 31 VT User Manual
MicroNet Technology Printer SP755D User Manual