Kawasaki Battery Charger 840095 User Manual

MODEL  
MODÈLE  
MODELO  
#840095  
RECHARGEABLE JUMPSTARTER  
INSTRUCTION MANUAL  
MANUEL D’UTILISATION DE SYSTÈME DE DÉMARRAGE  
RECHARGEABLE  
MANUAL DE INSTRUCCIONES PARA EL SISTEMA DE  
ARRANQUE ASISTIDO  
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS  
PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT  
LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.  
CE MANUEL CONTIENT DES INFORMATIONS IMPORTANTES CONCERNANT LA SÉCURITÉ, LE FONCTIONNEMENT ET LE  
REMISAGE DE CE PRODUIT. LIRE, ÉTUDIER ET VEILLER À BIEN COMPRENDRE TOUTES LES MISES EN GARDE ET INSTRUCTIONS  
ET AUTOCOLLANTS APPOSÉS SUR LE PRODUIT AVANT DE L’UTILISER. NE PAS RESPECTER CES INSTRUCTIONS POURRAIT  
ENTRAÎNER DES BLESSURES ET/OU DES DOMMAGES MATÉRIELS.  
ESTE MANUAL CONTIENE INFORMACIÓN IMPORTANTE SOBRE LA SEGURIDAD, OPERACIÓN, MANTENIMIENTO Y ALMACE-  
NAMIENTO DE ESTE PRODUCTO. ANTES DE USARLO, LEA Y COMPRENDA TODAS LAS PRECAUCIONES, ADVERTENCIAS,  
INSTRUCCIONES Y ETIQUETAS DEL PRODUCTO. DE LO CONTRARIO PODRÍA SUFRIR LESIONES GRAVES O CAUSAR DAÑOS  
MATERIALES.  
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS  
PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL,  
HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE  
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR  
COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected]. YOUR FEEDBACK IS VITAL TO US.  
87-1904-60957  
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™  
MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR  
DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE  
DIRECTED TO:  
POUR TOUTE QUESTION OU EN CAS DE PROBLÈME AVEC LE PRODUIT ALLTRADE, NE PAS LE RETOURNER AU MAGASIN OÙ IL  
A ÉTÉ ACHETÉ. APPELER LE SERVICE APRÈS-VENTEAU 1-800-590-3723. AVANT D’APPELER, VEILLER À SE PROCURER LES  
INFORMATIONS SUIVANTES : No. DE MODÈLE, DATE DE L’ACHAT ET ADRESSE DU MAGASIN. UN REPRÉSENTANT D’ALLTRADE  
PEUT RÉSOUDRE VOTRE PROBLÈME PAR TÉLÉPHONE. POUR TOUT COMMENTAIRE OU SUGGESTION, N’HÉSITEZ PAS À NOUS  
APPELER OU NOUS CONTACTER PAR COURRIEL À L’ADRESSE : [email protected]. VOS COMMENTAIRES NOUS  
SONT EXTRÊMEMENT PRÉCIEUX.  
KAWASAKI™ EST UNE MARQUE DE COMMERCE DE KAWASAKI™  
MOTORS CORP., U.S.A., QUI NE FABRIQUE PAS ET NE DISTRIBUE  
PAS CE PRODUIT THIS PRODUCT. LES QUESTIONS DES CONSOM-  
MATEURS DOIVENT ÊTRE ADRESSÉES À :  
FOR CUSTOMER SERVICE  
POUR LE SERVICE APRÉS VENTE  
OU DU CONSOMMATEUR  
KAWASAKI™ ES UNA MARCA REGISTRADA CON LICENCIA DE  
KAWASAKI™ MOTORS CORP., E.U.A., QUE NO FABRICA NI  
DISTRIBUYE ESTE PRODUCTO. LAS CONSULTAS DE LOS  
CONSUMIDORES DEBEN DIRIGIRSE A:  
PARA EL SERVICIO  
PARA EL CONSUMIDOR  
SI TIENE DUDAS O SURGEN PROBLEMAS CON SU PRODUCTO ALLTRADE, NO LO DEVUELVA A LA TIENDA LLAME A NUESTRO  
DEPARTAMENTO DE SERVICIO AL CLIENTE AL 1-800-590-3723. ANTES DE LLAMAR, TENGA A MANO LA SIGUIENTE  
INFORMACIÓN: No. DE MODELO, FECHA DE COMPRA Y DIRECCIÓN DE LA TIENDA. UN REPRESENTANTE DE ALLTRADE PUEDE  
RESOLVER SU PROBLEMA POR TELÉFONO. SI DESEA HACER ALGUNA SUGERENCIA O COMENTARIO, LLÁMENOS O ENVÍENOS  
UN MENSAJE DE CORREO ELECTRÓNICO A. INFO@ALLTRADETOOLS.COM. SUS COMENTARIOS SON FUNDAMENTALES PARA  
NOSOTROS.  
1-800-590-3723  
Printed in China  
Imprimé dans la Chine  
Impreso en China  
©COPYRIGHT 2005 ALLTRADE TOOLS, LLC.  
1431 VIA PLATA  
LONG BEACH, CA 90810-1462 USA  
690095_Rechargable Jumpstarter, Système de démarrage recharge-  
able, Sistema de arranque asistido  
 
IMPORTANT SAFETY RULES FOR JUMPSTARTERS  
!DANGER indicates an imminently hazardous  
situation which, if not avoided, will result in death  
or serious injury.  
Read and understand all instructions, safety warnings, and  
warning labels before attempting to use this jump-starter. Misuse can lead to  
risk of fire, electric shock or personal injury.  
!WARNING indicates a potentially hazardous  
situation which, if not avoided, could result in  
death or serious injury.  
Lead-acid batteries generate explosive gases. Accidental  
ignition by spark, cigarette or flame could lead to explosion or fire.  
!CAUTION indicates a potentially hazardous  
situation which, if not avoided, may result in  
minor or moderate injury.  
1. NEVER expose this product to rain, snow, ocean spray or any other damp  
environments. Never immerse this product in water.  
CAUTION used without the safety alert symbol  
indicates a potentially hazardous situation which,  
if not avoided, may result in property damage.  
2. DO NOT use this jump-starter if it has been dropped, damaged or immersed in  
liquid. Serious injury could occur.  
3. Keep the area around the battery well ventilated. Build-up of gases could lead  
to an explosion.  
NOTE provides additional information that is useful  
for proper use and maintenance of this tool. If a  
NOTE is indicated make sure it is fully understood.  
4. DO NOT smoke or light matches near battery.  
5. ALWAYS wear eye protection when working with batteries. If battery acid  
splashes into your eyes, flush immediately with cold running water.  
Continue flushing for at least 15-20 minutes, then seek immediate medical  
attention.  
IMPORTANT SAFEGUARDS  
People with electronic devices, such as pacemakers, should consult their  
physician(s) before using this product. Operation of electrical equipment in  
close proximity to a heart pacemaker could cause interference or failure of  
the pacemaker.  
6. NEVER wear a watch or metal pieces of jewelry near a lead-acid battery. If the  
metal touches the battery, a short circuit could occur causing severe skin  
damage.  
7. Wear protective clothing. If battery acid gets on skin or clothing, wash the  
affected area immediately with soap and water. If the skin becomes red,  
sore or irritated, seek immediate medical attention.  
WARNING: Some dust created by power sanding, sawing, grinding, drilling and  
other construction activities contains chemicals known to the State of California  
to cause cancer, birth defects or other reproductive harm.  
8. Be careful not to drop a metal tool on the battery. It could cause a spark, short  
circuit or explosion.  
Some examples of these chemicals are:  
• Lead from lead-based paints.  
9. NEVER allow the black and red clamps to touch a metal surface or each other.  
• Crystalline silica from bricks and cement and other masonry products,  
and arsenic and chromium from chemically-treated lumber.  
Store the clamps in their holders when not in use.  
10.Keep this product out of the reach of children or untrained users.  
Your risk from these exposures varies, depending on how often you do this type  
of work. To reduce your exposure to these chemicals: work in a well ventilated  
area, and work with approved safety equipment, such as dust masks that are  
specially designed to filter out microscopic particles.  
11.ALWAYS keep the unit in a dry, stable area when in use. Keep all cords and  
body parts away from the vehicle’s moving engine.  
12.Disconnect the negative (black) jumper cable FIRST. NEVER disconnect the red  
WARNING: Handling the power cord on this product may expose you to lead, a  
chemical known to the State of California to cause cancer and birth defects or  
other reproductive harm. Wash hands after handling.  
(positive) cable first unless the vehicle has a positive ground system.  
4
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.  
 
13.Keep battery away from intense heat. An overheated battery may explode.  
SYMBOLS  
14.ALWAYS use an outlet equipped with a GFCI (ground fault circuit interrupter)  
IMPORTANT: Some of the following symbols may be used on your tool. Please  
study them and learn their meaning. Proper interpretation of these symbols will  
allow you to operate the tool better and safer.  
when charging the jump-starter in a damp or wet location.  
IMPORTANT:  
1. Recharge unit after each use. Use only the supplied AC charger and cords to  
recharge the jump-starter. If you must use a DC power source, do not charge  
for more than 4 hours or damage to the battery may occur.  
SYMBOL  
NAME  
Volts  
Amperes  
Hertz  
Watt  
Kilograms  
Alternating Current  
Direct Current  
EXPLANATION  
Voltage (Potential)  
Current  
Frequency (Cycles per Second)  
Power  
Weight  
Type of Current  
Type of Current  
V
A
Hz  
W
Kg  
2. Make sure the jump-starter is OFF before attempting to charge.  
3. Use only manufacturer recommended accessories with this unit. NEVER put  
anything into the power socket outlet except the cords supplied with this prod-  
uct.  
4. This product is not to be used with appliances that draw more than 20 amps.  
5. For use with 12V DC battery systems only. Do not attempt to use with any  
other types of batteries.  
Alternating or Direct Current Type of Current  
Earthing Terminal  
Class II Construction  
Minutes  
Seconds  
Diameter  
Grounding Terminal  
Denotes Double Insulation  
Time  
Time  
Size of Drill Bits,  
Grinding Wheels, etc.  
No-load Rotational Speed  
Revolutions, Surface Speed,  
Strokes, etc. per Minute  
Speed, Torque or Position Settings  
6. DO NOT use this unit as a vehicular battery. This product is for jumpstarting  
only. It will not replace a dead battery.  
min  
s
7. If the vehicle to be jumpstarted has an on-board computer system, check the  
owner’s manual before attempting to jumpstart the engine. Jumpstarting with  
this unit may cause damage to some computer systems.  
8. Protect this product from moisture, excessive heat or direct sunlight.  
9. Keep the unit upright at all times.  
No load speed  
Revolutions per Minute  
.../min  
10.Make sure all parts are in proper working order before each use. Replace dam-  
aged parts immediately.  
1,2,3, …  
Ring Selector Settings  
11.DO NOT immerse in liquid.  
12.Never jumpstart a frozen battery.  
13.DO NOT crank the vehicle’s engine excessively. If the vehicle will not start after  
several attempts, the problem may be something besides the battery. Stop  
jumpstarting and look for other causes.  
14.NEVER over-inflate tires or other inflatable items.  
EMERGENCY FIRST AID  
Acid in Eyes. Flush immediately with cold running water. Continue flushing for at  
least 15-20 minutes, then seek immediate medical attention.  
Acid on Skin. Wash the affected area immediately with soap and water. If the skin  
becomes red, sore or irritated, seek immediate medical attention.  
5
6
 
BATTERY  
CHARGING THE BATTERY  
INITIAL CHARGE:  
The Jumpstart System does not leave the factory fully charged. Before use, attach  
the unit to the 120V AC charger for 48 hours. The green LED charge indicator will  
show when the battery has reached full charge. To view the charge level, press the  
Charge Status button.  
Before using battery pack, please read carefully all instructions and cautionary  
markings on battery pack, battery charger and product using battery.  
Do not incinerate the battery pack even if it is severely damaged or is  
completely worn out. The battery pack can explode.  
RECHARGE:  
The battery can be recharged using either AC or DC current. Cables are provided for  
both sources of power. We recommend using the AC charger as charging with DC  
power for long periods can damage the unit.  
Do not carry battery packs in aprons, pockets, or tool boxes, product kit  
boxes, drawers, etc. with loose metal objects. Battery pack terminals could  
be short circuited causing damage to the battery pack, severe burns or fire.  
CHARGING:  
This unit contains a maintenance-free, non-spillable, sealed lead-acid bat-  
tery, which must be recycled or disposed of properly. Contact your local waste  
management authority for disposal locations in your area, or call 1-800-  
CLEANUP.  
ALWAYS recharge the jump-starter after use. Leaving the battery in a discharged  
state will shorten the life of the battery.  
Recharge the battery at least once a month, especially if it has not been in use.  
Keeping the jump-starter fully charged will increase the life of the battery.  
AC ADAPTER:  
To charge this unit from a standard 120v household outlet, just plug the AC charg-  
er/adapter into the socket. Use the barrel connector to plug the AC charger/adapter  
into the recharge port on the jump-starter. Charge until the status indicator lights  
show green.  
The battery is not fully charged at the factory. Attach jump-starter to the 120V  
AC charger for 48 hours before use. Unit will not overcharge when attached to  
the AC charger.  
Always switch to a fresh battery when tool performance begins to diminish.  
Severe heat is most destructive to a battery; the more heat generated, the faster  
the battery loses power. A battery that gets too hot can have a shortened life.  
When first purchased, this unit should be charged for 48 hours to bring the battery  
up to full working strength. After each use, recharge the battery for at least 14  
hours. Charge once a month, even if the unit has been idle. Charging will help the  
battery last longer.  
Never over-discharge a battery by using the tool even after tool performance  
has decreased. Do not attempt to discharge a tool’s battery by continuing to  
pull on the tool trigger. When tool performance begins to diminish, stop the tool  
and recharge the battery for optimal performance.  
Charge battery pack at ambient temperatures between 50° F – 104° F.  
Store tool and battery pack in locations where temperatures will not exceed  
120°F. This is important to prevent serious damage to the battery cells.  
When battery pack is not in use, keep it away from other metal objects such as  
paper clips, coins, keys, nails, screws or other small metal objects that can  
make a connection from one terminal to another. Shorting the battery terminals  
together may cause sparks, burns, or fire.  
7
8
 
DC ADAPTER:  
FUNCTIONAL DESCRIPTION  
To charge the jump-starter from a boat or car accessory receptacle, plug one end of  
the included DC adapter into the receptacle and the other end into the accessory  
socket on the jump-starter. Leave the vehicle running to prevent draining the vehi-  
cle battery. Charge until the status indicator lights show green. DO NOT CHARGE  
FROM A DC SOURCE FOR MORE THAN 4 HOURS. DAMAGE TO THE UNIT WILL  
RESULT.  
7
2
8
10  
This method is not as effective as the AC method and should only be used if no AC  
socket is available.  
14  
11  
13  
3
15  
1
4
5
17  
12  
6
16  
9
CONTROLS AND COMPONENTS:  
1. On/Off Jumpstart Switch  
2. Analog Pressure Gauge  
3. Automotive Adapter  
4. 12 Volt DC Accessory Outlet  
5. Battery Charge Level Button  
6. Battery Level Indicators  
7. Work Light On/Off Switch  
8. Work Light  
10. Positive (Red) Jumper Cable  
and clamp  
11. Compressor On/Off Power  
Switch  
12. Recharging Port  
13. 260 PSI compressor air hose  
and tire chuck  
14. Inflation adapters (nozzles)  
15. Changing Status Indicator  
16. Clamps Reverse Polarity Indicator  
17. AC/DC Charging Adapter  
9. Negative (Black) Jumper Cable  
and clamp  
9
10  
 
OPERATING THE JUMPSTARTER  
Before attempting to jumpstart any vehicle, read and  
understand all safety warnings and instructions in this manual. Jumpstarting a  
vehicle can be dangerous. Take all precautions recommended in this manual.  
1. ALWAYS wear eye protection when working with batteries. If battery acid  
splashes into your eyes, flush immediately with cold running water. Continue  
flushing for at least 15-20 minutes, then seek immediate medical attention.  
2. DO NOT smoke or light matches near battery. Batteries can emit explosive gases.  
3. Wear protective clothing. If battery acid gets on skin or clothing, wash the  
affected area immediately with soap and water. If the skin becomes red,  
sore or irritated, seek immediate medical attention.  
4. Contain long hair and remove jewelry before attempting to jumpstart the engine.  
Do not wear vinyl clothing. Be extra careful when static electricity is present.  
POSITIVE GROUND SYSTEMS ONLY  
5. Never jumpstart a frozen battery.  
If the vehicle has a positive ground system, attach the black (negative) clamp to the  
vehicle battery’s negative terminal and attach the red (positive) clamp to the non-  
moving metal body part.  
6. Batteries emit hydrogen gas when charging. Keep away from flame. Avoid  
breathing vapors.  
7. Replace worn or damaged parts immediately.  
5. Start the vehicle. Do not allow the starter to grind more than a couple of seconds.  
8. Keep all clothing, cords, cables and body parts away from a running engine.  
9. NEVER immerse this unit in fluid of any kind.  
6. When the engine starts, remove the chassis clamp first, then the battery clamp.  
Put the clamps back into their holders.  
REVERSE POLARITY SWITCH  
If you should inadvertently attach the positive (red) clamp to the battery’s negative  
terminal or the negative (black) clamp to the battery’s positive terminal, an alarm  
will sound. If you hear the alarm, immediately disconnect the cables and try again.  
Once a correct connection is made, the internal switch will turn on, allowing you to  
jumpstart your vehicle.  
JUMPSTARTING A VEHICLE  
1. Turn vehicle ignition to OFF and make sure all accessories are also turned off.  
Put the vehicle in park. Set the emergency brake.  
2. Put the jumpstart system in a dry, level location. Remove the jumper clamps  
from their holders. (Squeeze on the handles and pull up.)  
3. ALWAYS connect the red (positive) clamp first. Connect the red clamp to the  
positive terminal on the vehicle’s battery. Attach the black (negative) clamp to  
the chassis or a non-moving metal part of the vehicle. DO NOT attach to the  
negative battery terminal or any moving parts.  
FLOODING  
Sometimes repeated attempts to start an engine will leave it flooded. If after sever-  
al attempts, the engine still refuses to start, turn the ignition off and wait a while.  
4. If the alarm sounds, disconnect the clamps (black clamp first) and switch.  
12  
 
USING THE AIR COMPRESSOR  
ALWAYS disconnect the clamp connected to the vehicle  
frame or engine FIRST.  
TIRE INFLATION  
1. Open the small compartment on the rear of the unit and pull out the air hose.  
2. Push the connector onto the tire’s valve stem as far as possible and press the  
thumb lock to hold it in place.  
USING THE 12V POWER SUPPLY  
3. Turn on compressor.  
DO NOT use this product with appliances that draw more  
than 8 amps.  
4. Watch the pressure gauge. Be careful not to over-inflate the tire.  
5. When the proper air pressure is reached, turn off the compressor.  
6. Open the thumb lock and pull the connector free of the valve stem.  
To use this unit as a power supply, simply plug your appliance’s 12V DC connector  
into the DC accessory outlet and turn on the appliance.  
7. Return air hose to storage compartment. Always leave the thumb lock open  
when air hose is not in use.  
USING THE WORK LIGHT  
The emergency work light is located on the upper right corner of the jump-starter.  
To operate, push the ON/OFF switch. When the unit is fully charged, this work light  
will provide over 100 hours of illumination. ALWAYS turn the work light off before  
charging or storage.  
13  
14  
 
INFLATION USING A NOZZLE  
1. Select the proper nozzle for the  
job.  
ACCESSORIES  
Use only accessories that are recommended by the manufacturer for your model.  
Accessories that may be suitable for one tool may become hazardous when used on  
another tool.  
2. Push the adapter into the con-  
nector and lock into place with  
the thumb lock.  
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.  
If you must use an extension cord, be sure that the gauge is large enough to carry  
the amount of current necessary for your power tool. If not, your tool may experi-  
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge  
number, the heavier the cord (see table below).  
3. Insert the adapter into the item  
you wish to inflate. Remember  
that most sports items inflate  
very quickly.  
4. Turn on the compressor  
switch.  
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS  
TOOL CURRENT RATING  
CONDUCTOR SIZE IN A.W.G  
5. When the item is  
inflated, turn off the  
compressor.  
AMPERE  
3-6  
6-8  
8-10  
10-12  
12-16  
16-20  
10FT.  
18  
18  
18  
16  
25FT.  
18  
18  
18  
16  
50FT.  
18  
18  
18  
14  
100FT.  
18  
16  
14  
14  
-
6. Pull out the adapter.  
7. Store hose and  
nozzles.  
14  
12  
12  
12  
12  
12  
-
SPECIFICATIONS  
SPECIFICATIONS  
Internal Battery  
Jumpstart Current  
Air Compressor Pressure  
12V/18AH  
350A (instant)  
250PSI  
MAINTENANCE AND CLEANING  
DO NOT incinerate used batteries. Batteries will explode  
if exposed to intense heat or flame.  
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS  
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would  
like further information on the following products, please contact Alltrade Customer  
Service Department at 1-800-590-3723.  
ALWAYS cover exposed terminals with heavy-duty electrical tape before disposal.  
Unprotected terminals may short out and cause fire or personal injury.  
This sealed lead-acid battery is recyclable. Please take used batteries to a city  
battery drop-off center, lead-acid battery retailer or other battery recycling location.  
Cordless Drills/Screwdrivers  
Impact Wrenches  
Sanders  
Reciprocating Saws  
Routers  
Rotary Tools  
Jigsaws  
Corded and Cordless Multi-Purpose Tools  
Wide Range of Accessories and more  
Circular Saws  
Angle Grinders  
15  
 
found to be defective and subject to warranty. Alltrade retains the sole discretion  
to determine whether any item or part is nonconforming and, if so, whether the  
item and/or part will be repaired and/or replaced. If the unit is repaired, new or  
reconditioned replacement parts may be used. If Alltrade chooses to replace  
the product, it may replace it with a new or reconditioned one of the same or  
comparable design. The repaired or replaced unit will be warranted under the terms  
of the remainder of the warranty period. Typically, a defective product that is  
returned within the first 30 days after the purchase date will be replaced; for items  
returned after the first 30 days and within the warranty period, covered defective  
parts not subject to normal wear and tear or other exclusions will be repaired or  
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-  
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-  
conforming item and/or part thereof shall constitute fulfillment of all  
obligations to the purchaser. Alltrade shall not be responsible or liable for any  
expense, including freight charges, or repairs made outside Alltrade’s facility, unless  
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade  
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,  
commercial loss or consequential damages.  
2 YEAR LIMITED HOME USE WARRANTY  
Express and Exclusive Limited Home Use Warranty to Original Retail Buyer  
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail  
purchaser of the accompanying KAWASAKI™ portable power tool and no one else  
all parts of the product (except those parts referred to below which are specifically  
excluded from such warranty (see Exclusions)) to be free from defects in materials  
and workmanship for a period of two years from original date of purchase.  
SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This  
Kawasaki™ portable power tool is offered as a home use tool and carries a HOME  
USE WARRANTY. This tool is made for home use in the execution of  
projects and repairs in and around the home. Use of the tool for COMMERCIAL  
PURPOSES OR ON A JOBSITE is not covered under this warranty.  
The date of purchase shall be the date of shipment to the original purchaser, or the  
date the original purchaser took possession, custody or control of the product,  
whichever occurred first. This warranty shall be null and void if the product or any  
component thereof is modified, altered or used for any commercial purpose or on  
a jobsite. This warranty does not apply to any other product and/or component  
thereof manufactured or distributed by Alltrade, and does not apply to products  
and/or components thereof designed, manufactured and/or assembled by others,  
for which Alltrade makes no warranties whatsoever. THERE ARE NO WARRANTIES  
WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.  
Exclusions  
This warranty does not cover parts damaged due to normal wear, abnormal  
conditions, misapplication, misuse, abuse, accidents, operation at other than  
recommended pressures or temperatures, improper storage or freight damage.  
Parts damaged or worn by operation in dusty environments are not warranted.  
Failure to follow recommended operating and maintenance procedures also  
voids warranty.  
Warranty Performance  
By purchasing the product, purchaser expressly acknowledges and agrees that their  
sole and exclusive remedy under this warranty shall be strictly limited to the repair  
or replacement of any covered nonconforming items or parts thereof provided that  
any such nonconforming item and/or part is promptly returned to Alltrade’s facility  
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,  
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #310-522-9008)  
within the applicable warranty period, with a written request by purchaser that  
Alltrade repair and/or replace the nonconforming item and/or part. We recommend  
that you keep the original product packaging in the event you need to ship the unit.  
We suggest the package be insured against loss or in transit damage. When  
sending your product include your name, address, phone number, dated proof  
of purchase (or copy), and a statement about the nature of problem. Warranty  
coverage is conditioned upon purchaser furnishing Alltrade with adequate written  
proof that they are the original purchaser and of the original purchase date. Parts  
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will  
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if  
This limited warranty does not apply to accessory items such as drill bits,  
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding  
sheets and other related items.  
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,  
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS  
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,  
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,  
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO  
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS  
WARRANTY.  
Alltrade will not be liable for the following: labor charges, loss or damage resulting  
from improper operation, maintenance or repairs made by other persons;  
pre-delivery services such as assembly, oil or lubricants, and adjustment;  
maintenance services that are normally required to maintain the product.  
The use of other than genuine Alltrade Repair Parts will void warranty.  
17  
18  
 
Warranty Disclaimers  
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH  
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,  
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL  
ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF  
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF  
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY  
PERIODS SPECIFIED ABOVE.  
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,  
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY  
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR  
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING  
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE  
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF  
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,  
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY  
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE  
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE  
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY  
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR  
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S  
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.  
Limitations on Warranty Disclaimers  
Some states do not allow limitations on how long an implied warranty lasts  
and some states do not allow the exclusion or limitation of the incidental or  
consequential damages, so part or all of the above limitations or exclusions may not  
apply to you. This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
If your product is not covered by this warranty, please call our Customer Service  
Department at 1-310-522-9008 or toll free at 1-800-590-3723 for general repair  
information and charges.  
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE  
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE  
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR  
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE  
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,  
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT  
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,  
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY  
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF  
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING  
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE  
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY  
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.  
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH  
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING  
THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE  
REMEDY IS AS STATED ABOVE.  
Limitation Of Liability  
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR  
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY  
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH  
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS  
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,  
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR  
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS  
19  
20  
 

Indesit Washer WIE 167 User Manual
Infinity Speaker cc 3 User Manual
JVC Car Stereo System KW R500 User Manual
JVC Security Camera LST0979 001B User Manual
JVC Stereo System UX S59 User Manual
JVC TV Converter Box UX GD6M User Manual
Kambrook Food Processor KFP95 User Manual
Kenmore Water Dispenser 625348261 User Manual
Keys Fitness Treadmill A6t User Manual
KitchenAid Outdoor Kitchen Island KBFU271 User Manual