E le c t r ic a l S p e c if ic a t io n s
TM
CV-3222 Specifications
in t e l l ig e n t m o t io n s y s t e m s , in c .
Excellence in MotionTM
BAUD Rate
Connectors:
Up to 19.2 kbps
CV-3222
RS-232 Side
RS-422 Side
Isolation
DB-25F (DCE)
7 Pin Terminal
RS-232 to RS-422 CONVERTER
1500 V Optical
OPERATING INSSTRUCTIONS
Power Requirement
12 VDC @ 100 mA
C o n n e c t in g t h e C V-3 2 2 2
R e c o m m e n d e d W ir in g P r a c t ic e s
W ire .............................................. 2 4 AW G Twis ted Pair
Strip Length .............................................. 0 .2 0 0 in (5 m m )
Torque on Term inal Strip Screws ............... 3 lb-in (0 .3 3 Nm )
370 N. MAIN ST., PO BOX 457, MARLBOROUGH, CT 06447
PH: (860) 295-6102, FAX: (860) 295-6107
FR.GND
SHIELD
TD(A)
TD(B)
RS-232
Side
RS-422
Side
RD(A)
RD(B)
GND
In t r o d u c t io n
+12 VDC
The CV-3 2 2 2 is an in-line RS-2 3 2 to RS-4 2 2 conver ter. This
product works well with all IMS indexer products and is us eful
when the indexer device is at a dis tance greater than 5 0 feet
which is the RS-2 3 2 lim it. The CV-3 2 2 2 is recom m ended for us e
with the following IMS products :
A gender conver ter or DB2 5 M to DB-9 F adapter is required to
plug the RS-2 3 2 s ide directly into a PC s erial COM por t.
IM4 8 3 I/ IE
IM1 0 0 7 I/ IE
Panther LI/ LE
Panther HI/ HE
LYNX Controller Products
TD (A)
TD (B)
RD (A)
RD (B)
GND
RX -
RX +
TX -
M e c h a n ic a l S p e c if ic a t io n
TX +
GND
Dim ens ions in Inches (m m )
+12 VDC
3.32
(84.4)
W ARNING! The ground (GND) of
the conver ter MUST be connected
to the ground pin on the IMS
indexer product or dam age m ay
occur to the product!
+12 VDC
Power
FR.GND
SHIELD
TD(A)
TD(B)
RD(A)
RD(B)
2.14
(54.5)
GND
+12 VDC
Mos t PC s erial por ts are able to provide s ufficient power
to the CV-3 2 2 2 provided a s tandard adapter is us ed to
connect the CV-3 2 2 2 to the COM por t. If this is the cas e
it is not neces s ary to us e an external +1 2 VDC s upply.
Rev. 05242004
Copyright © 2004 Intelligent Motion Systems, Inc.
|