Sears Lawn Aerator S A 4 0 0 B H User Guide

OWNER'S MANUAL  
4 0 " L A W N A E R A T O R  
MODEL:  
S A - 4 0 0 B H  
• Assembly  
• Installation  
• Operation  
• Repair Parts  
Original Instructions  
For the latest product updates & setup tips:  
Important: This manual contains information for the safety  
Visit us on the web!  
of persons and property. Read it carefully before  
assembly and operation of the equipment!  
1008590BH-C  
 
PARTS REFERENCE  
================================================================================================  
INSTALLATION  
QUESTIONS?  
Tools Required:  
MISSING PARTS?  
(1) Flat Head Screwdriver  
REPLACEMENT PARTS?  
(1) 1/2”Wrench  
(1) Set of Pliers or Hammer  
(1) Pair of Gloves.  
DON’T GO BACK  
TO THE STORE!  
STOP  
Please call our Customer Service  
Department Toll-Free at  
877.728.8224  
or  
10  
@brinly.com  
11  
10  
6
5
7
1
14  
13  
14  
13  
16  
11  
4
21  
3
1
12  
20  
13  
14  
14  
13  
12  
19  
15  
17  
15  
12  
17  
13  
2
13  
15  
17  
14  
12  
15  
13  
19  
12  
9
9
8
REF PART NO.  
DESCRIPTION  
End Panel  
QTY  
REF PART NO.  
DESCRIPTION  
QTY  
1
2
3
1008490-10  
1008491  
2
1
1
12  
30M1000P  
Hex Nut, 5/16"  
10  
Tine Shaft  
13  
14  
15  
16  
17  
18  
19  
20  
21  
40M1000P  
45M1111P  
45M2121P  
B-3861  
Lock Washer, 5/16"  
Flat Washer, 5/16"  
Flat Washer, 5/8"  
10  
6
B-3593-10  
Drawbar  
4
5
B-3922  
Caution Aerator Decal  
Tray  
1
1
8
1008489-10  
1008563  
B-7063  
Hitch Pin, 1/2" X 2-1/2"  
Square Bearing  
Hairpin Cotter, 1/8"  
E Ring, 5/8"  
1
6
BH Logo Decal  
Pictorial Caution Label  
Tine  
1
B-6270  
2
7
1
D-146P  
1
8
B-5423  
10  
20  
6
F-577  
2
9
B-5425  
Bearing  
R-821-10  
L-1744  
Clevis  
1
10  
11  
20M1012P  
20M1016P  
Round Head Screw, 5/16" X 3/4"  
Round Head Screw, 5/16" X 1"  
Serial No Label  
1
4
1008590BH-C  
3.  
 
ASSEMBLY  
================================================================================================  
12  
Figure 1  
1.  
2.  
Install Drawbar (3) to the Tray (5) using two 5/16" X  
1" Round Head Screws (11), two 5/16" Lock Washers  
(13), and two 5/16" Hex Nuts (12) as shown in Figure  
1.  
12  
3
13  
5
Assemble the Clevis Drawbar (20) to the Drawbar (3)  
using two 5/16" X 1" Round Head Screws (11), two  
5/16" Lock Washers (13), and two 5/16" Hex Nuts  
(12). See Figure 1.  
13  
20  
NOTE: Install Clevis (20) in direction shown.  
11  
11  
Figure 2  
12  
1
12  
12  
13  
14  
13  
3.  
Install the two End Panels (1) to the Tray (5) using six  
5/16" X 3/4" Round Head Screws (10), six 5/16" Flat  
Washers (14), six 5/16" Lock Washers (13), and six  
5/16" Hex Nuts (12). See Figure 2.  
14  
5
13  
14  
1
NOTE: Leave nuts loose in this step so that the  
End Panels can be adjusted later.  
10  
10  
Figure 3  
19  
15  
17  
15  
4.  
5.  
Fasten an E Ring (19) onto the Tine Shaft (2) and  
place a 5/8" Flat Washer (15) onto the Tine Shaft,  
see Figure 3. Push the shaft through one End Panel  
(1).  
2
1
Place a Square Bearing (17) and then a 5/8" Flat  
Washer (15) onto the Tine Shaft, see Figure 3.  
4.  
1008590BH-C  
 
ASSEMBLY  
================================================================================================  
CAUTION: Gloves are required when handling  
aerator tines. Tines have extremely sharp points.  
Use caution when handling.  
Figure 4  
17  
15  
6.  
Position the 10 Tines (8) and 20 Bearings (9) onto the Tine  
Shaft as follows:  
* Bearing (9), small end rst  
* Tine (8)  
* Bearing (9), large end rst  
See Figure 4.  
NOTE: Round projections on Bearings (9) must t  
into holes in Tines (8) and into two holes of opposite  
Bearing.  
8
7.  
Place a 5/8" Flat Washer (15) and then a Square Bearing  
(17) onto the Tine Shaft between the last bearing and the  
End Panel, and Push the Square Bearing into the hole on  
the End Plate, see Figure 4.  
9
9
Bearing (small end first)  
Aerator Tine  
Bearing (large end first)  
CAUTION: Gloves are required when tightening  
End Panel Bolts. Tines have extremely sharp  
points. Use caution when working around them.  
8.  
9.  
Push the End Panels (1) toward the Tines (8) until there is no  
free play along the Tine Shaft and tighten the nuts (A) on the  
End Panels. See Figure 6, 6 nuts total.  
Figure 5  
15  
19  
NOTE: The Square Bearings must be completely  
inserted into the End Panels before you tighten the nuts.  
1
Push the end of the Tine Shaft with the fastened E Ring  
all the way towards the End Panel. Add as many 5/8" Flat  
Washers (15) to the opposite end of the shaft as necessary  
to eliminate extra space. Fasten the remaining E ring on the  
end of the Tine Shaft.  
1
A
A
NOTE: Store extra Flat Washers in a safe location.  
You may need them for maintenance of End Panel  
Adjustment.  
1008590BH-C  
5.  
 
OPERATION  
================================================================================================  
DEPTH / PENETRATION OF TINES  
Figure 6  
CAUTION: Avoid injury! Openings in Tray allow access to  
Tines for cleaning and service. Excercise caution when  
working around Tray openings and avoid placing body parts  
into the openings.  
Bagged weight material can fall through Tray Openings and be torn open or  
damaged by the Tines. Use solid weight or close Tray Openings with wood panel or  
by other suitable means.  
16  
Weight should be added to the tray after attaching to the towing vehicle.  
Weight should be secured by rope, straps, or other suitable means to contain the  
weight in the tray.  
20  
17  
Maximum capacity of the Aerator Tray is 110 lbs.  
Moderate soil moisture is important for proper tine penetration.  
CAUTION: Avoid injury! Make sure feet and hands are clear  
of Tine Tips.  
Extremely dry conditions will not permit tine penetration and may damage the tines.  
Extremely wet conditions will cause full penetration of tines (up to tine bearings). This  
condition will cut slots in the turf.  
Tray Openings allow access to Tines for cleaning and service only and are not to be  
used in any other application.  
INSTALLING YOUR AERATOR  
1.  
Park towing vehicle safely and set the parking brake (see towing vehicle  
operator’s manual).  
SPEED  
2.  
3.  
Align Aerator Clevis (20) with towing machine hitch plate.  
Install Hitch Pin (16) through Clevis (20) and towing machine hitch plate.  
Secure Hitch Pin (16) with Hairpin Cotter (17).  
The best operating speed is 3 mph or less.  
Maximum operating speed is 5 mph.  
REMOVING YOUR AERATOR  
FREQUENCY  
Lawn aeration is not accomplished in a single pass. It will normally take several  
passes over the lawn. Alternating the direction by 90 degrees will improve the  
aeration effect.  
CAUTION: Keep body parts away from under drawbar.  
Do not attempt to disconnect Aerator from towing vehicle with  
weight on the tray.  
The Aerator may be used in an independent operation or may be used when mowing  
your lawn.  
1.  
Park towing vehicle safely and set the parking brake (see towing vehicle  
operator’s manual).  
2.  
3.  
4.  
5.  
Unload weight from Aerator tray.  
Remove Hairpin Cotter (17) and Hitch Pin (16).  
Push Aerator away from the towing vehicle.  
Install Hitch Pin (16) and Hairpin Cotter (17) for storage.  
USAGE  
CAUTION: Avoid injury! Avoid damage to tines. Do not  
tow the aerator across concrete or asphalt driveways and  
walkways.  
CAUTION: Excessive towed load can cause loss of control  
on slopes. Stopping distance increases with speed and the  
weight of the towed load.  
CAUTION: Total towed weight must not exceed combined  
weight of towing vehicle, ballast and operator.  
AERATOR WEIGHT  
The following maximum loaded weight capacity is the weight of the Aerator plus the  
maximum weight loaded into the Aerator Tray:  
Model  
Weight  
SAT-400BH  
Maximum Tray Weight  
25 lbs (empty)  
110 lbs  
--------------------  
135 lbs  
Maximum Towed Weight  
6.  
1008590BH-C  
 
MAINTENANCE-STORAGE  
================================================================================================  
MAINTENANCE  
The key to years of trouble-free service is to keep your Aerator clean and dry.  
After the rst 30 minutes of use, check all fasteners for tightness.  
Thereafter, periodically check all fasteners for tightness.  
Tines are manufactured with galvanized steel to resist wear of abrasive soil. Striking  
objects can cause Tines to curl or break. Contact Brinly-Hardy customer service  
department to purchase replacement Tines.  
Apply a light coat of oil on tines after use to prevent rust.  
For rust appearing on painted surfaces, sand lightly and paint affected area with  
enamel.  
Periodically remove debris that builds up between Tines.  
Apply lubricating oil at each tine bearing and axle bearing before use.  
Figure 7  
1
1
A
A
After use, the Tine and Tine Bearings may become loose on the Tine Shaft.  
Should this occur, remove the looseness as follows (refer to Figure 7):  
1.  
2.  
Loosen the End Panel nuts (A).  
Push the End Panels (1) toward the Tines until there is no free play along the  
Tine Shaft.  
3.  
Tighten the End Panel nuts (A).  
NOTE: The Square Bearings must be completely inserted into the End Panels  
before you tighten the End Panel nuts (A).  
STORAGE  
CAUTION: Avoid injury! The Aerator Tines are very sharp.  
Care should be taken when choosing a storage location for  
this product.  
Store Aerator in low trafc aisle ways.  
Store Aerator with Tine points facing the wall or ground.  
Store Aerator on the ground or low to the ground.  
Do not store Aerator hanging from the wall, ceiling or with Tine points facing outward.  
Product packaging can be used to offer a protective area around the Tines.  
Drawbar is a trip hazard. Avoid leaving Drawbar in aisle ways and walking paths.  
1008590BH-C  
7.  
 
MANUFACTURER’S LIMITED WARRANTY  
FOR  
Pull Behind Accessories  
The limited warranty set forth below is given by Brinly-Hardy  
Company with respect to new merchandise purchased and used  
in the United States, its possessions and territories.  
respect to any product, shall bind Brinly-Hardy Co. During  
the period of the warranty, the exclusive remedy is repair or  
replacement of the product as set forth above.  
The provisions as set forth in this warranty provide the sole  
and exclusive remedy arising from the sale. Brinly-Hardy  
Co. shall not be liable for incidental or consequential loss  
Brinly-Hardy Company warrants the products listed below against  
defects in material and workmanship, and will at its option, repair  
or replace, free of charge, any part found to be defective in materi- or damage including, without limitation, expenses incurred  
als or workmanship. This limited warranty shall only apply if this  
product has been assembled, operated, and maintained in accor-  
dance with the Operator’s manual furnished with the product, and  
has not been subject to misuse, abuse, commercial use, neglect,  
accident, improper maintenance, alteration, vandalism, theft, re,  
water, or damage because of other peril or natural disaster.  
for substitute or replacement lawn care services or for rental  
expenses to temporarily replace a warranted product.  
Some states do not allow the exclusion or limitation of incidental  
or consequential damages, or limitations on how long an implied  
warranty lasts, so the above exclusions or limitations may not ap-  
ply to you.  
Normal Wear Parts or components thereof are subject to separate  
terms as follows: All normal wear parts or component failures will  
be covered on the product for a period of 90 days.  
During the warranty period, the exclusive remedy is replacement  
of the part. In no event shall recovery of any kind be greater that  
the amount of the purchase price of the product sold. Alteration  
of safety features of the product shall void this warranty. You as-  
sume the risk and liability for loss, damage, or injury to you and  
your property and/or to others and their property arising out of the  
misuse or inability to use this product.  
Parts found to be defective within the warranty period will be  
replaced at our expense. Our obligation under this warranty is ex-  
pressly limited to the replacement or repair, at our option, of parts  
found to be defective in material and workmanship.  
HOW TO OBTAIN SERVICE: Warranty parts replacements are  
available, ONLY WITH PROOF OF PURCHASE, through our Pull  
Behind Accessories Customer Service Department. Call 877-728-  
8224.  
This limited warranty shall not extend to anyone other than the  
original purchaser or to the person for whom it was purchased as  
a gift.  
HOW STATE LAW RELATES TO THIS WARRANTY: This limited  
warranty gives you specic legal rights, and you may also have  
other rights which vary from state to state.  
This limited warranty does not provide coverage in the following  
cases:  
a) Routine maintenance items such as lubricants and lters.  
b) Normal deterioration of the exterior nish due to use or  
exposure.  
c) Transportation and/or labor charges.  
d) The warranty does not include rental use.  
IMPORTANT: The Warranty period stated below begins with the  
PROOF OF PURCHASE. Without the proof of purchase, the War-  
ranty period begins from the date of manufacture determined by  
the serial number manufacturing date.  
WARRANTY PERIOD:  
No implied warranty, including any implied warranty of mer-  
chantability of tness for a particular purpose, applies after  
the applicable period of express written warranty above as  
to the part as identied below. No other express warranty  
whether written or oral, except as mentioned above, given  
by any person or entity, including a dealer or retailer, with  
The warranty period for the product shown in this manual is as  
follows: Steel Frame Parts: consumer - 2 Years, commercial - 90  
days. Tines are normal wear parts - 90 days.  
Brinly-HardyCompany, 3230 IndustrialParkway, Jeffersonville, IN 47130 (877) 728-8224  
1008590BH-C  
8.  
 

Axion Lawn Mower ZT18533 User Manual
LG Electronics Lawn Mower 34UM95 PD 34UM95 PE 34UM94 PD User Guide
McCulloch Lawn Mower 165H107RB User Guide
McCulloch Lawn Mower 96141004402 User Guide
Rover Lawn Mower Domestic Rotary Lawnmower User Guide
Snapper Lawn Mower BH120G38AB User Manual
Snapper Lawn Mower NR205012 R204513E R205012 User Manual
Snapper Lawn Mower RP215517HC User Manual
Snapper Lawn Mower S200XKAV2761 User Manual
Snapper Lawn Mower W32120 User Manual