iLive MP3 Docking Station IS608B User Manual

IS608B  
INSTRUCTION MANUAL  
Contents  
Warnings and Precautions ............................................................................... 2  
Important Safety Instructions............................................................................ 3  
In the Box & Features....................................................................................... 4  
Powering the Unit & Changing the Remote’s Battery....................................... 5  
Docking an iPod & Playing an iPod.................................................................. 6  
Setting the Time & Setting the Alarms.............................................................. 7  
Tuning the AM/FM Radio & Saving Radio Stations to the Unit’s Memory........ 8  
Connecting to an Audio Player using the Aux Input ......................................... 9  
Locations of Controls & Control Definitions............................................... 11-15  
Service Information......................................................................................... 16  
 
IS608B-IB.indd  
1
4/7/ꢀ008 10:41:ꢀ0 AM  
Important Safety Instructions  
1. Read Instructions - All the safety and  
operating instruction should be read before the  
product is operated.  
feature. If you are unable to insert the plug  
receptacles as this can result in a risk of fire or  
electric shock.  
fully into the outlet, try reversing the plug. If  
the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do  
not defeat the safety purpose of the polarizes  
plug.  
19. Object and Liquid Entry - Never push  
objects of any kind into this product through  
openings as they may touch dangerous voltage  
points or short-out parts that could result in a  
fire or electric shock. Never spill liquid of any  
kind on the product.  
ꢀ. Retain Instructions - The safety and  
operating instruction should be retained for  
future reference.  
Alternate Warnings - This product is  
equipped with a three-wire grounding-type  
plug, a plug having a third (grounding) pin.  
This plug will only fit into a grounding-type  
power outlet. This is a safety feature. If you  
are unable to insert the plug into the outlet,  
contact your electrician to replace your  
obsolete outlet. Do not defeat the safety  
purpose of the grounding-type plug.  
ꢁ. Heed Warnings - All warning on the product  
and in the operating instructions should be  
adhered to.  
ꢀ0. Servicing - Do not attempt to service this  
product yourself as opening or removing  
covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to  
qualified service personnel.  
4. Follow instructions - All operating and use  
instructions should be followed.  
5. Cleaning - Unplug this product from the  
wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Clean only with a  
dry cloth.  
ꢀ1. Damage Requiring Service - Unplug  
this product from the wall outlet and refer  
servicing to qualified service personnel under  
the following conditions:  
1ꢁ. Power-Cord Protection - Power supply cords  
should be routed so that they are not likely to  
be walked on or pinched by items placed upon  
or against them, paying particular attention to  
cords at plugs, convenience receptacles, and  
point where they exit from the product.  
6. Attachments - Do not use attachments not  
recommended by the product manufacturer as  
they may cause hazards.  
a) When the power-supply cord or plug is  
damaged,  
7. Water and Moisture - Do not use this product  
near water - for example, near a bath tub, wash  
bowl, kitchen sink, or laundry tub; in a wet  
basement, or near a swimming pool, and the  
like. The apparatus shall not be exposed to  
dripping or splashing and that no objects filled  
with liquids, such as vases, shall be placed on  
apparatus.  
b) If liquid has been spilled, or objects have  
fallen into the product,  
14. Protective Attachment Plug - The product  
is equipped with an attachment plug having  
overload protection. This is a safety feature.  
See Instruction Manual for replacement or  
resetting of protective device. If replacement  
of the plug is required, be sure the service  
technician has used a replacement plug  
c) If the product has been exposed to rain or  
water,  
d) If the product does not operate normally  
by following the operating instructions.  
Adjust only those controls that are covered  
by the operating instructions as an improper  
adjustment of other controls may result in  
damage and will often require extensive work  
by a qualified technician to restore the product  
to its normal operation.  
8. Accessories - Do not place this product on  
an unstable cart, stand tripod, bracket, or  
table. The product may fall, causing serious  
injury to a child or adult, and serious damage  
to the product. Use only with a cart, stand,  
tripod, bracket, or table recommended by the  
manufacturer, or sold with the product. Any  
mounting of the product should follow the  
manufacturer’s instructions, and should use  
a mounting accessory recommended by the  
manufacturer.  
specified by the manufacturer that has the  
same overload protection as the original plug.  
15. Outdoor Antenna Grounding - If an  
outside antenna is connected to the receiver,  
be sure the antenna system is grounded  
so as to provide some protection against  
voltage surges and built-up static charges.  
Article 810 of the National Electrical Code,  
ANSI/NFPA 70, provides information with  
regard to proper grounding of the mast and  
supporting structure, grounding of the mast  
and supporting structure, grounding of the  
lead-in wire to an antenna-discharge unit, size  
of grounding conductors, location of antenna-  
discharge unit, connection to grounding  
electrodes, and requirements for the grounding  
electrode.  
e) If the product has been dropped or  
damaged in any way, and  
f) When the product exhibits a distinct change  
in performance - this indicates a need for  
service.  
ꢀꢀ. Replacement Parts - When replacement parts  
are required, be sure the service technician  
has used replacement parts specified by the  
manufacturer or have the same characteristics  
as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other  
hazards.  
9. A product and cart combination should be  
moved with care. Quick stops, excessive force,  
and uneven surfaces may cause the appliance  
and cart combination to overturn.  
See figure:  
See figure:  
ꢀꢁ. Safety Check - Upon completion of any  
service or repairs to this product, ask the  
service technician to perform safety checks  
to determine that the product is in proper  
operating condition.  
ꢀ4. Wall or Ceiling Mounting - The product  
should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
10. Ventilation - Slots and openings in the cabinet  
are provided for ventilation and to ensure  
reliable operation of the product and to protect  
it from overheating, and these openings must  
not be blocked or covered. The openings  
should never be blocked by placing the  
product on a bed, sofa, rug, or other similar  
surface. This product should not be placed in a  
built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the  
manufacturer’s instruction have been adhered  
to.  
ꢀ5. Heat - The product should be situated away  
from heat sources such as radiators, heat  
registers, stoves, or other products (including  
amplifiers) that produce heat. Battery shall not  
be exposed to excessive heat such as sunshine,  
fire, or the like.  
16. Lightning - For added protection for this  
product during a lightning storm, or when it  
is left unattended and unused for long periods  
of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This  
will prevent damage to the product due to  
lightning and power-line surges.  
ꢀ6. Main plug is used as disconnect device and  
it should remain readily operable during  
intended use. In order to disconnect the  
apparatus from the mains completely, the  
mains plug should be disconnected from the  
mains socket outlet completely.  
11. Power Sources - This product should be  
operated only from the type of power source  
indicated on the marking label. If you are not  
sure of the type of power supply to your home,  
consult your product dealer or local power  
company. For products intended to operate  
from battery power, or other sources, refer to  
the operating instruction.  
17. Power Lines - An outside antenna system  
should not be located in the vicinity of  
overhead power lines or other electric light or  
power circuits, or where it can fall into such  
power lines or circuits. When installing an  
outside antenna system, extreme care should  
be taken to keep from touching such power  
lines or circuits as contact with them might be  
fatal.  
ꢀ7. Excessive sound pressure from earphones and  
headphones can cause hearing loss.  
1ꢀ. Grounding or Polarization - This product  
may be equipped with a polarized alternating-  
current line plug (a plug having one blade  
wider than the other). This plug will fit into  
the power outlet only one way. This is a safety  
18. Overloading - Do not overload wall outlets,  
extension cords, or integral convenience  
 
IS608B-IB.indd  
4/7/ꢀ008 10:41:ꢀ1 AM  
In the Box  
• IS608B  
• Brackets for iPods  
• Remote Control  
• Documentation  
Features  
• Certified iPod Connector installed for  
iPod docking  
• Digital Clock with Adjustable Sleep/  
Snooze Timer  
• Recharge Circuit for iPod/mini/nano/  
photo/video  
• Dual Alarm  
• Gradual Wake  
• Controls Connected iPod players  
• Stereo Speakers built in  
• Wake to iPod, Radio or Buzzer  
• AC-Powered  
• Digital Tune AM/FM Stereo Radio with • Full-Function Remote Control  
Station Memory Presets  
• 5-Preset EQ with Bass Sound  
• Digital Volume Control  
• Remembers the Last Volume & Source  
Setting  
• Controls Docked iPod & Unit Functions  
• iPod Docking Brackets  
• Remote Control, Button Cell Battery  
included  
• Jacks  
• Line-In Jack for Shuffle and other Au-  
dio Players  
• Headphone Jack, ꢁ.5mm  
• LCD Segment Display  
4
 
IS608B-IB.indd  
4
4/7/ꢀ008 10:41:ꢀꢀ AM  
Powering the Unit  
Power the unit by connecting it to a standard AC outlet (1ꢀ0V ~ 60Hz) via the at-  
tached AC cord.  
AC 1ꢀ0V / 60Hz  
Changing the Remote Battery  
CR2025  
OPEN  
PUSH  
1. Push the Release Button and pull out the Battery Compartment to access the  
battery.  
ꢀ. Replace the old battery with an equivalent new battery (CRꢀ0ꢀ5).  
ꢁ. The positive side of the battery, as indicated by a plus symbol, must be facing up  
when inserted into the remote.  
5
 
IS608B-IB.indd  
5
4/7/ꢀ008 10:41:ꢀꢁ AM  
Docking an iPod  
1. Locate the numbered Bracket that fits the iPod that  
will be docked.  
Each included Bracket has a number on it, indicating  
which iPod model that bracket is compatible with.  
See the separate bracket chart page to identify which  
bracket is needed.  
ꢀ. Snap the Bracket into place over the iPod connector  
in the Docking Station.  
All Brackets will only fit one way onto the Dock.  
When inserting an iPod nano (first or second  
generation), slide the Dock connection on the unit so  
that it matches the opening on the iPod nano (first or  
second generation).  
ꢁ. Connect the iPod to the iPod connector inside the  
Docking Station.  
Once an iPod is connected to the Docking Station, the unit will charge the docked  
iPod.  
Playing an iPod  
1. Dock an iPod onto the unit by following the “Docking an iPod” instructions on  
page 6.  
ꢀ. Press the Power/Alarm Off Button to turn the unit on.  
ꢁ. Press the iPod Button to switch the unit to iPod mode.  
4. Press the Play/Pause/Preset + Button to begin playing a docked iPod.  
5. Press the Skip/Search Buttons to skip through songs on a docked iPod. Press and  
hold the Skip/Search Buttons to search through an individual song on a docked  
iPod.  
6
 
IS608B-IB.indd  
6
4/7/ꢀ008 10:41:ꢀꢁ AM  
Setting the Time  
1. Turn the unit off by pressing the Power/Alarm Off Button.  
ꢀ. Press and hold the Clock/Preset Button until the time begins to flash on the LCD  
Display.  
ꢁ. Press the Skip/Search Buttons to adjust the hour.  
4. Press the Clock/Preset Button to set the hour.  
5. Press the Skip/Search Buttons to adjust the minute.  
6. Press the Clock/Preset Button to set the minute and finish setting the time.  
Setting the Alarms  
1. Turn the unit off by pressing the Power/Alarm Off Button.  
ꢀ. Press and hold the ALM 1 or ALM 2 Buttons until the alarm time begins to flash  
on the LCD Display.  
ꢁ. Press the Skip/Search Buttons to adjust the hour.  
4. Press the ALM 1 or ALM 2 Buttons to set the hour.  
5. Press the Skip/Search Buttons to adjust the minute.  
6. Press the ALM 1 or ALM 2 Buttons to set the minute and time.  
7. Press the Skip/Search Buttons to set the alarms to sound to the radio, iPod, or  
buzzer.  
7
 
IS608B-IB.indd  
7
4/7/ꢀ008 10:41:ꢀꢁ AM  
Tuning the AM/FM Radio  
1. Turn the unit on by pressing the Power/Alarm Off Button.  
ꢀ. Press the Source Button to switch the unit to radio mode.  
ꢁ. Press the Stop/AM/FM Button to switch between AM and FM radio modes.  
4. Press the Skip/Search/Tune/Hour/Minute Buttons to tune the AM or FM radio.  
Saving Radio Stations to the Unit’s Memory  
1. Tune to the desired radio station by following the “Tuning the AM/FM Radio”  
instructions listed above.  
ꢀ. Press and hold the Clock/Preset Button to begin saving the current AM or FM  
radio station.  
ꢁ. Press the Play/Pause/Preset + Buttons to cycle through the numbered memory  
slots on the unit.  
4. Press the Clock/Preset Button to save the current AM or FM radio station to the  
selected memory slot.  
5. To cycle through saved radio stations, press the Play/Pause/Preset + Button when  
in radio mode.  
8
 
IS608B-IB.indd  
8
4/7/ꢀ008 10:41:ꢀꢁ AM  
Connecting to an Audio Player using the Aux Input  
When connecting two products using an RCA Cable, match the colored ports with  
the same colored connection. (Red to Red, White to White, and Yellow to Yellow)  
1. Plug one end of a ꢁ.5 mm Cable (not included) or a ꢁ.5 mm - RCA Cable (not  
included) into the AUX (Auxiliary) Input on the unit.  
ꢀ. Plug the other end of the ꢁ.5 mm Cable into the audio output/headphone output on  
an Mpꢁ Player or Other Audio Source.  
ꢁ. Press the Power/AL Off Button to turn the unit on.  
4. Press the Source Button to switch the unit to Aux mode.  
5. Audio played from the Mpꢁ Player or Other Audio Source will now be heard on  
the unit.  
If connecting to the headphone output of an audio source, the sources volume  
controls may need to be adjusted for optimal sound.  
9
 
IS608B-IB.indd  
9
4/7/ꢀ008 10:41:ꢀꢁ AM  
Locations of Controls  
8
9
1
4
5
6
10  
CLOCK/PRESET  
iPod  
ALM  
2
SOURCE  
ALM  
1
EQ  
DISPLAY  
POWER  
L
U
M
M
/F  
M
A
O
E
V
11  
1ꢀ  
H
T
R
ALARM OFF  
U
/
N
N
M
R
I
E
I
M
N
R
N
/
+
R
+
U
T
H
P
+
R
ES  
E
T
1ꢁ  
7
10  
 
IS608B-IB.indd 10  
4/7/ꢀ008 10:41:ꢀ4 AM  
Control Definitions  
1
Clock/Preset Button  
Press and hold the Clock/Preset Button, with the unit turned off, to set the clock.  
Press the Clock/Preset Button, in radio mode, to save a radio station to the unit’s memory.  
2
3
4
5
6
iPod Button  
Press the iPod Button to switch the unit to iPod mode.  
Source Button  
Press the Source Button to switch the unit between radio and aux mode.  
EQ Button  
Press the EQ Button to switch the unit between rock, classic, jazz, pop, and normal equalizer modes.  
Volume Buttons  
Press the Volume Buttons to adjust the volume of audio output from the unit.  
Power/Alarm Off Button  
Press the Power/Alarm Off Button to turn the unit off and on.  
Press the Power/Alarm Off Button to turn the alarm off after it has sounded.  
7
8
Docking Station  
Use the Docking Station to connect an iPod to the unit.  
Snooze Button  
Press the Snooze Button to delay the alarm for an additional 6 minutes, after the alarm has sounded.  
Press & hold the Snooze Button consecutively to set the sleep timer between 10-90 minutes in incre-  
ments of 10.  
9
ALM 1 & ALM 2 Buttons  
Press and hold the ALM 1 Button, with the unit turned off, to set alarm 1.  
Press and hold the ALM ꢀ Button, with the unit turned off, to set alarm ꢀ.  
10 Display Button  
Press the Display Button to view the time on the LCD Display when in radio or aux mode.  
11 Stop/AM/FM Button  
Press the Stop/AM/FM Button to stop a docked iPod during play.  
Press the Stop/AM/FM Button in radio mode to switch between AM and FM radio.  
12 Skip/Search/Tune/Hour/Minute Buttons  
Press the Skip/Search/Tune/Hour/Minute Buttons to skip from one song to the next on a docked iPod.  
Press and hold the Skip/Search/Tune/Hour/Minute Buttons to search through an individual track on a  
docked iPod.  
Press the Skip/Search/Tune/Hour/Minute Buttons to tune the AM and FM radio.  
Press the Skip/Search/Tune/Hour/Minute Buttons to adjust the hour and minute when setting the clock  
or alarms.  
13 Play/Pause/Preset + Button  
Press the Play/Pause/Preset + Button to play or pause a docked iPod.  
Press the Play/Pause/Preset + Button to cycle through saved AM and FM radio stations.  
11  
 
IS608B-IB.indd 11  
4/7/ꢀ008 10:41:ꢀ4 AM  
Locations of Controls  
14  
15  
16  
17  
18  
19  
POWER/  
AL OFF  
ꢀ0  
ꢀ1  
ꢀꢀ  
MUTE  
PRESET  
SOURCE  
iPod  
AM/FM  
DISP  
MENU  
SELECT  
MENU  
CLOCK/PRESET  
MENU  
ꢀꢁ  
HR/MIN/  
HR/MIN/  
TUN–  
TUN+  
+
PRESET  
ꢀ4  
ꢀ5  
SHUFFLE  
REPEAT  
EQ  
ꢀ6  
ꢀ7  
CHAPTER  
ALBUM  
PLAYLIST  
VOL  
SLEEP  
ALARM  
SET  
SNOOZE  
ꢀ8  
1ꢀ  
 
IS608B-IB.indd 1ꢀ  
4/7/ꢀ008 10:41:ꢀ5 AM  
Control Definitions  
14 LCD Display  
Use the LCD Display to view the time, alarm time, radio frequency and unit’s current source.  
15 Auxiliary Input  
Use the Auxiliary Input to connect an MPꢁ player or other audio device to the unit.  
16 Headphone Jack  
Use the Headphone Jack to connect a set of headphones or earbuds to the unit.  
17 FM Antenna  
The FM Wire Antenna provides flexibility and range when adjusting the FM reception. An AM Antenna  
is built into the Clock Radio.  
18 Battery Backup Compartment ( requires 3 - AAA batteries, not included)  
The Battery Back-Up will save the clock and alarm settings in case of a power outage.  
19 Mute Button  
Press the Mute Button to mute the volume of the unit.  
20 Power/Alarm Off Button  
Press the Power/Alarm Off Button to turn the unit off and on.  
Press the Power/Alarm Off Button to turn the alarm off after it has sounded.  
21 Play/Pause/Preset + Button  
Press the Play/Pause/Preset + Button to play or pause a docked iPod.  
Press the Play/Pause/Preset + Button to cycle through saved AM and FM radio stations.  
22 Display Button  
Press the Display Button to view the time on the LCD Display when in radio mode.  
23 Menu/Clock/Preset Button  
Press the Menu/Clock/Preset Button to move back through menus on a docked iPod.  
Press and hold the Menu/Clock/Preset Button, with the unit turned off, to set the clock.  
Press the Menu/Clock/Preset Button, in radio mode, to save a radio station to the unit’s memory.  
24 Shuffle Button  
Press the Shuffle Button to play songs from a docked iPod in random order.  
25 Repeat/Preset - Button  
Press the Repeat/Preset - Button once to repeat the current track playing from a docked iPod.  
Press the Repeat/Preset - Button twice to repeat the current album or playlist playing from a docked  
iPod.  
Press the Repeat/Preset - Button to cycle through saved AM and FM radio stations.  
26 Chapter Button  
Press the Chapter Button to cycle through chapters on a docked iPod.  
27 Album Button  
Press the Album Button to cycle through albums on a docked iPod.  
28 ALM 1 & ALM 2 Buttons  
Press and hold the ALM 1 Button, with the unit turned off, to set alarm 1.  
Press and hold the ALM ꢀ Button, with the unit turned off, to set alarm ꢀ.  
1ꢁ  
 
IS608B-IB.indd 1ꢁ  
4/7/ꢀ008 10:41:ꢀ5 AM  
Locations of Controls  
ꢀ9  
ꢁ0  
POWER/  
AL OFF  
MUTE  
SOURCE  
iPod  
AM/FM  
PRESET  
ꢁ1  
ꢁꢀ  
DISP  
MENU  
SELECT  
MENU  
CLOCK/PRESET  
MENU  
HR/MIN/  
HR/MIN/  
TUN–  
TUN+  
+
PRESET  
ꢁꢁ  
SHUFFLE  
REPEAT  
EQ  
ꢁ4  
ꢁ5  
CHAPTER  
ALBUM  
PLAYLIST  
VOL  
SLEEP  
ALARM  
SET  
ꢁ6  
SNOOZE  
14  
 
IS608B-IB.indd 14  
4/7/ꢀ008 10:41:ꢀ5 AM  
Control Definitions  
29 Source Button  
Press the Source Button to switch the unit between radio and aux mode.  
30 iPod Button  
Press the iPod Button to switch the unit to iPod mode.  
31 Stop/AM/FM Button  
Press the Stop/AM/FM Button to stop a docked iPod during play.  
Press the Stop/AM/FM Button in radio mode to switch between AM and FM radio.  
32 Skip/Search/Tune/Hour/Minute Buttons  
Press the Skip/Search/Tune/Hour/Minute Buttons to skip from one song to the next on a  
docked iPod.  
Press and hold the Skip/Search/Tune/Hour/Minute Buttons to search through an individual  
track on a docked iPod.  
Press the Skip/Search/Tune/Hour/Minute Buttons to tune the AM and FM radio.  
Press the Skip/Search/Tune/Hour/Minute Buttons to adjust the hour and minute when setting  
the clock or alarms.  
33 EQ Button  
Press the EQ Button to switch the unit between rock, classic, jazz, pop, and normal equalizer  
modes.  
34 Volume Buttons  
Press the Volume Buttons to adjust the volume of audio output from the unit.  
35 Playlist Button  
Press the Playlist Button to cycle through playlists on a docked iPod  
36 Snooze/Sleep Button  
Press the Snooze/Sleep Button to delay the alarm for an additional 6 minutes, after the alarm  
has sounded.  
Press & hold the Snooze/Sleep Button consecutively to set the sleep timer between 10 and 90  
minutes.  
15  
 
IS608B-IB.indd 15  
4/7/ꢀ008 10:41:ꢀ5 AM  
Service Information  
Address ꢀ116 Carr Street, St. Louis MO, 6ꢁ106  
Phone  
Fax  
1-ꢁ14-6ꢀ1-ꢀ881  
1-ꢁ14-588-1805  
Email  
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel  
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,  
visit the Support section at  
francés visite la sección de la ayu- ou le Français visitez la section de  
© ꢀ007 DPI, Inc. iPod not included. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. TruBass, SRS and the SRS  
logo are trademarks of SRS Labs, Inc. All other trademarks appearing herein are the property of their respective owners.  
 
IS608B-IB.indd 16  
4/7/ꢀ008 10:41:ꢀ5 AM  

Grandstream Networks Security Camera GXV 3611HD User Manual
Grizzly Planer G1021X2 User Manual
Hamilton Beach Coffeemaker D45020W User Manual
Harbor Freight Tools Welder 55167 User Manual
Honeywell Computer Monitor RDD100 User Manual
HP Hewlett Packard Switch EZ KIT User Manual
HP Hewlett Packard Switch J3188A User Manual
Hunter Fan Universal Remote 44758 User Manual
Hustler Turf Lawn Mower 928192 User Manual
Icom Computer Drive IC 7200 User Manual