Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
44" 13 Drawer
Industrial Roller Cabinet
ITEM 68784
Email our technical support at: [email protected]
REV 13k
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
®
Copyright 2011 by Harbor Freight Tools . All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
3. Keep assembly area clean and well lit.
7. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cabinet.
4. Keep bystanders out of the area during assembly.
Use Precautions
TO PREVENT SERIOUS INJURY AND DEATH FROM TIPPING:
1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
7. Do not lift using handle.
Do not move or lift while loaded.
2. This product is not a toy nor a toy chest.
Do not allow children to play with or near this item.
8. To prevent tipping, move using supplied
handle on Bottom Cabinet only.
3. Do not exceed weight capacities,
evenly distributed from bottom up.
Be aware of dynamic loading!
9. Lock Swivel Casters after moving.
10. Do not mount on truck bed or
any other moving object.
Sudden load movement may briefly create
excess load causing product failure.
11. Use as intended only.
4. Do not open more than one Drawer at once.
5. Empty, close and lock Drawers before moving.
12. Inspect before every use;
do not use if parts are loose or damaged.
6. Use only on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cabinet.
Do not roll Cabinet over concrete seams
or other rough/uneven surfaces.
13. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Item 68784
For technical questions, please call 1-888-866-5797.
Page 3
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
1. Assemble on a flat, level, hard and smooth surface
capable of safely supporting a fully loaded Cabinet.
4. Attach two Fixed Casters (13) to the other
side using eight Caster Screw Sets (14).
2. Attach Side Handle (3) to either side of Cabinet using
Screws (2).
Fixed
Caster
Washer
Spring
Washer
Screw
Side
Handle
Bolt
Screw
Figure C
5. Lock the Casters by depressing the brake levers.
Figure A
6. If using Top Chest (68787), assemble
according to its Owner’s Manual.
3. Attach two Locking Swivel Casters (15) to the same
side as Handle using eight Caster Screw Sets (14).
Locking
Swivel
Caster
Brake
Washer
Lever
Spring
Washer
Bolt
Figure B
Final Assembly
1. Using an assistant, place EMPTY Top Chest
on top of Bottom Cabinet.
Top
Chest
2. WARNING! Make sure the Top Chest is
Edge
Edge
seated inside the Bottom Cabinet’s edges.
Bottom
Cabinet
Figure D
Page 4
For technical questions, please call 1-888-866-5797.
Item 68784
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Empty all Drawers.
5. Roll Cabinet to a flat, level, hard and smooth
surface capable of safely supporting a fully
loaded Cabinet. Do not roll Cabinet over concrete
seams or other rough/uneven surfaces.
2. Close all Drawers and lock them.
3. Unlock Swivel Casters.
6. Lock Swivel Casters.
4. To prevent tipping, move using supplied
handle on Bottom Cabinet only.
7. Unlock Drawers and fill Cabinet evenly, from
bottom to top. Do not exceed weight capacities.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If any part becomes damaged,
have the problem corrected before further use.
1. PERIODICALLY, inspect the general
2. Wipe external surfaces of the
condition of the Cabinet. Check for:
Cabinet with clean cloth.
• loose hardware,
3. Lubricate Drawer Slides as needed.
• misalignment or binding of parts,
• brake operation,
• caster swivel function and movement,
• cracked or broken parts,
• any other condition that may
affect its safe operation.
Item 68784
For technical questions, please call 1-888-866-5797.
Page 5
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Diagram
Parts List
Part
Description
Qty
1
2
1
6
6
6
6
1
1
6
6
1
Part
Description
Qty
16
2
1
2
1
1
32
1
5
1
2
3
4
5
6
7
8
9
Top Shelf Liner
14 Caster Screw Set
Screw (M6x55)
Side Handle
15 Ø5″ x 2″ Locking Swivel Caster
16 Lock
17 Key (not shown)
18 Latch
19 Lock Bar
20 Drawer Slide
A
B
C
D
E
Drawers B & C Label
Drawers B & C Handle
Drawers D & E Label
Drawers D & E Handle
Drawer A Label
Drawer 36-7/8″ꢀW x 16″ꢀL x 4-3/4″ꢀD
Drawer 22-3/8″ꢀW x 16″ꢀL x 2-7/8ꢀD
Drawer 22-3/8″ꢀW x 16″ꢀL x 6″ꢀD
Drawer 12-5/16″ꢀW x 16″ꢀL x 2-7/8″D
Drawer 12-5/16″ꢀW x 16″ꢀL x 6″D
Drawer A Handle
10 Drawers B & C Liner
11 Drawers D & E Liner
12 Drawer A Liner
1
5
1
13 Ø5″ x 2″ Fixed Caster
2
Record Serial Number Here:
Note: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts.
Note: If product has no serial number, record
month and year of purchase instead.
Page 6
For technical questions, please call 1-888-866-5797.
Item 68784
Assembly Diagram
1
12
19
8
18
16
A
2
B
3
9
2
10
4
D
C
13
11
6
5
7
20
15
E
14
9
Item 68784
For technical questions, please call 1-888-866-5797.
Page 7
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (888) 866-5797
|