Haier Flat Panel Television HLTDC15 User Manual

HLTDC15/HLTDC19/HLTDC20  
LCD TV  
USER MANUAL  
Please read this manual carefully  
before using this TV set and keep it  
for future reference.  
 
Important Safety Instructions  
10. POWER SOURCES  
This unit should be operated only from the type of power source indicated on the rating plate. If you are  
not sure of the type of power supply to your home, consult your appliance dealer or local power company.  
For units intended to operate from battery power, or other sources, refer to the operating instructions.  
11. POWER-CORD PROTECTION  
Power-supply cords shouldbe routed sothat they arenot likely tobe walked onor pinched by  
items placed uponor against them, paying particular attentionto cords atplugs,convenience  
receptacles, and thepoint where theyexit from theappliance.  
12. LIGHTNING  
Toprotect your unitfrom a lightningstorm, or whenit is leftunattended and unusedfor long  
periods of time, unplug it fromthe wall outletand disconnect theantenna or cablesystem. This  
will prevent damageto the unitdue to lightningand power linesurges.  
13. POWER LINES  
An outside antennasystem should notbe located inthe vicinity ofoverhead power linesor other  
electric light orpower circuits, orwhere it canfall into suchpower lines orcircuits. When installing  
an outside antennasystem, extreme careshould be takento keep fromtouching such powerlines  
or circuits, ascontact with themmight be fatal.  
14. OVERLOADING  
Do not overloadwall outlets andextension cords, asthis can resultin a riskof fire orelectric  
shock.  
15. OBJECT AND LIQUID ENTRY  
Do not pushobjects through anyopenings in thisunit, as theymay touch dangerousvoltage  
points or shortout parts thatcould result infire or electricshock. Never spillor spray anytype of  
liquid into theunit.  
16. SERVICING  
Do not attemptto service thisunit yourself asopening or removingcovers may exposeyou to  
dangerous voltage orother hazards. Referall servicing toqualified service personnel.  
17. DAMAGE REQUIRING SERVICE  
Unplug this unitfrom the walloutlet and referservicing to qualifiedservice personnel underthe  
following conditions:  
a. When thepower-supply cord orplug is damaged.  
b. If liquidhas been spilled, or objects havefallen into theunit.  
c. If theunit has beenexposed to rainor water.  
d. If theunit does notoperate normally byfollowing the operatinginstructions. Adjustonly those  
controls that arecovered by theoperating instructions, asan improper adjustmentof other  
controls may resultin damage andwill often requireextensive work bya qualified technicianto  
restore the unitto its normaloperation.  
e. If theunit has beendropped or thecabinet has beendamaged.  
f . Whenthe unit exhibitsa distinct changein performance, thisindicates a needfor service.  
18. REPLACEMENT PARTS  
When replacement partsare required, besure the servicetechnician uses replacementparts  
specified by themanufacturer or thosethat have thesame characteristics asthe original part.  
Unauthorized substitutions mayresult in fire, electric shock orother hazards.  
19. SAFETY CHECK  
Upon completion ofany service orrepairs to thisunit, ask theservice technician toperform safety  
checks to determinethat the unitis in properoperating condition.  
20. HEAT  
The product shouldbe situated awayfrom heat sourcessuch as radiators, heat registers, stoves,  
or other products(including amplifiers) thatproduce heat.  
21. DISC TRAY  
Keep your fingerswell clear ofthe disc trayas it isclosing. It maycause serious personalinjury.  
22. CONNECTING  
When you connectthe product toother equipment, turnoff the powerand unplug allof the  
equipment from thewall outlet. Failureto do somay cause anelectric shock andserious personal  
injury. Readthe owner's manualof the otherequipment carefully andfollow the instructionswhen  
making any connections.  
23. SOUND VOLUME  
Reduce the volumeto the minimumlevel before youturn on theproduct. Otherwise, suddenhigh  
volume sound maycause hearing orspeaker damage.  
 
Safety Instructions  
PRECAUTIONS  
FCC WARNING-This equipment may  
generate or use radio frequency  
energy.Changes or modifications to this  
equipment may cause harmful  
interference unless the modifications are  
expressly approved in the instruction  
manual.The user could lose the authority  
to operate this equipment if an  
unauthorized change or modification is  
made.  
CAUTION:USE OF CONTROLS OR  
ADJUSTMENTS OR PERFORMANCE  
OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION  
EXPOSURE.  
CAUTION:VISIBLE AND INVISIBLE  
LASER RADIATION WHEN OPENAND  
INTERLOCK DEFEATED.DO NOT  
STARE INTO BEAM.  
LASER SAFETY  
This unit employs a laser.Only a qualified  
service person should remove the cover  
or attempt to service this device,due to  
possible eye injury.  
LOCATION:INSIDE,NEAR THE DECK  
MECHANISM.  
SAVE THESE INSTRUCTIONS  
Thank you for using ourHaier product. This easy-to-use manualwill guide youin  
getting the bestuse of yourproduct. Remember torecord the modeland serial  
number. They are onlabel in backof the unit.  
Model number  
serial number  
Date of purchase  
Staple your receiptto your manual. You will need itto obtain warrantyservice.  
 
To users:  
Thank you for purchasing our LCD-TV.  
Before connecting the LCD-TV and turning on the power, please  
read this book carefully. Please keep this book for later use.  
If the unit is disabled by an electrostatic discharge, please turn off  
the power to the unit and turn it back on to reset.  
CONTENT  
Safety Notice Items...................................................................................  
Front Panel Controls..................................................................................  
Connection Options...................................................................................  
Remote Control Key Functions...................................................................  
1
2
3
4
5
Remote Control  
..................................................................................  
Installing Batteries..................................................................................  
5
Connection Instructions.............................................................................  
Grounding..............................................................................................  
External equipment Connections..............................................................  
Antenna Connection.............................................................................  
PC Setup.............................................................................................  
VCR Setup...........................................................................................  
Cable TV Setup....................................................................................  
6
6
6
6
7
8
9
External AV Source Setup......................................................................  
9
Basic Operating Instructions.......................................................................  
10  
Turn on the LCD-TV.................................................................................  
10  
Audio Control..........................................................................................  
Mute......................................................................................................  
10  
10  
Select the TV Channel You Want...............................................................  
11  
Picture Mode...........................................................................................  
11  
Program Scan.........................................................................................  
11  
Sleep......................................................................................................  
11  
Menu Operations.......................................................................................  
Picture Menu Options...............................................................................  
Picture Menu Options Continued...............................................................  
Sound Menu Options................................................................................  
Sound Menu Options Continued................................................................  
12  
12  
13  
13  
14  
Function Menu Options.............................................................................  
15  
Function Menu Options Continued.............................................................  
16  
Adjust Menu Options................................................................................  
Tuning Menu Options..............................................................................  
Tuning Menu Options Continued..............................................................  
Parental Menu Options.............................................................................  
Parental Menu Options Continued.............................................................  
DVD Features..........................................................................................  
Special Function Playback.......................................................................  
DVD System Setup...................................................................................  
25  
Playable Discs.........................................................................................  
29  
16  
17  
18  
18  
19-21  
22  
24  
Disc Protection and DVD Characteristics...................................................  
30  
Troubleshooting Guide...............................................................................  
31  
Specifications...........................................................................................  
Warranty ..................................................................................................  
32  
33  
 
Safety Notice Items  
Incorrect usage may cause fire or electric shock. To prevent this, please do as  
required when you are installing, using and cleaning this machine. To insure your  
safety and extend the life-span of LCD-TV, please read the following items  
carefully before using:  
l Please read and understand all the instructions before operation;  
l Please keep this manual for later use;  
l Please comply strictly with the warning instructions on the machine and  
in this book;  
l Please comply with the instructions provided;  
l Please do not use additional devices that are not recommended by  
manufacturer:  
l Before operation, please make sure that the operating voltage of your unit is  
correct;  
l Do not place the unit on unstable, dusty and humid places;  
l Never put the unit in direct sunlight or near heat sources;  
l Allow enough space for proper ventilation;  
l Please keep water away from the LCD-TV . If water comes in contact with the  
LCD-TV, disconnect the power cord from the power source, then wipe the set  
with a dry soft cloth;  
l Do not remove the back cover. If service is needed, please contact an  
Authorized service technician.  
 
Front Panel Controls  
2
3
4
5
1
TV/AV MENU VOL- VOL+ CH-  
CH+ POWER  
7
6
Control Panel Function  
1. Power supply switch  
2.TV/AV Selects the input signals: PC/COMPONENT/AV/SV/TV  
3. MENU Press to select the main menu  
4. VOL- Volume down / Left orientation to adjust the item in the OSD  
VOL+ Volume up / Right orientation to adjust the item/Press to enter  
5. CH- TV channel down / to select the item in the menu  
CH+ TV channel up / to select the item in the menu  
6. Power indicator  
Illuminates red in standby mode, illuminates green when the display is  
turned on  
7.Remote Sensor  
Receives the signals from the remote control  
 
Connection Options  
DVD  
STOP PLAY/PAUSE OPEN/CLOSE  
PREW  
NEXT  
DVD insert  
The above figure is for reference only,  
connections may differ depending upon  
the models  
Antenna Input  
Connect cable or  
antenna signals to  
the TV, either direc-  
tly or through your  
cable box.  
Earphone port  
PC Audio Input  
AV/S-VIDEO/  
COMPONENT Audio  
Input  
Connect the audio  
output from the pc  
to the audio input port  
Connect audio output  
from an external device  
to these jacks  
Video Input  
Connect video output  
from an external  
device to this jack  
S-Video Input  
Connect S-Video out  
from an S-Video device  
to the jacks.  
DVD/DTV Input  
Connect a component  
video/audiodevice to  
these jacks  
VGA Input  
Connect to the VGA  
15PIN analog output  
connector of a PC  
display card to use set  
as a PC display  
 
Remote Control Key Functions  
When using the remote control, aim it  
Buttons on the remote control  
towards the remotesensor on theTV  
Stand By  
DVD Open/close  
TV/AV and input selection  
Scan  
POWER  
SCAN  
TV/AV  
TV/DVD OPEN/CLOSE  
RECALL  
MUTE  
DISPLAY  
TV/DVD  
Mute  
Return to Previous Channel  
Call Screen Display  
Program Number  
Select MONO,STEREO, SAP in NTSC system  
CCD ( closed caption) On / Off  
TV Sleep button  
1
5
2
6
0
3
4
7
SLEEP  
8
CCD  
9
MTS/SAP  
P.STD  
Adjust Picture Mode  
Volume/Channel Selection  
MENU  
CH+  
VOL  
-
VOL  
+
MENU  
Exit On Screen Display  
DVD 10+  
EXIT  
10+  
CH-  
DVD STOP  
STOP  
REV  
PAUSE/STEP  
SETUP  
SUBTITLE  
NEXT  
DVD SUBTITLE  
DVD SETUP  
FWD  
PREV  
DVD PAUSE/STEP  
DVD FAST REVERSE  
DVD FAST FORWARD  
DVD MENU  
D.MENU  
A-B  
SLOW  
REPEAT  
PLAY/ENTER  
DVD Next Chapter  
DVD Previous Chapter  
DVD REPEAT  
TITLE/PBC SEARCH  
ANGLE  
AUDIO  
DVD PLAY/ENTER  
PROGRAM  
D.CALL  
ZOOM  
DVD A-B REPEAT  
UP  
DVD Cursor Move button  
LEFT  
DVD SLOW  
RIGHT  
DVD ANGLE  
DOWN  
DVD SEARCH  
DVD AUDIO Mode  
DVD TITLE/PBC  
DVD PROGRAM  
Zoom Function  
DVD CALL  
 
Remote Control  
Installing Batteries  
!
Remove the battery cover.  
!
Insert two size AAbatteries matching  
the +/-polarities of the battery to the +/-  
marks inside the battery compartment.  
Precautions  
As strong light may interfere with the  
signals, change yourposition to  
operate the remote control if  
the television cannot be turned  
on or off as expected.  
Make sure that there is no  
obstacle between theremote  
controller and televisionset.  
Make sure that two AA 1.5V alkaline  
batteries are loaded. The batteries  
must be of the same type, must be  
inserted properly, and must not be  
rechargeable.  
Keep the remote control  
away from heat sources or  
humid areas toensure  
effective performance of  
the remote.  
 
Connection Instructions  
Grounding  
Ensure that you connect the grounding / earth wire to prevent possible  
electric shock. If grounding methods are not possible, have a qualified  
electrician install a separate circuit breaker. Do not try to ground the  
unit by connectingit to telephone wires, lighteningrods, or gaspipes.  
External Equipment Connections  
Antenna Connection  
- Antenna or Cable Service with a Cable Box Connections  
- For optimum picture quality, adjust antenna direction if needed.  
Multi-family Dwellings/Apartments  
(Connect to wall antenna socket)  
wall antenna  
socket  
Bronze Wire  
RF coaxial wire (75 ohm)  
VHF antenna  
UHF antenna  
Turn clockwise to tighten.  
Bronze Wire  
Be careful not to bend the bronze  
wire when connecting the antenna.  
outdoor  
antenna  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
To improve picture quality in a poor  
signal area, purchase and install a  
signal amplifier.  
If the antenna needs to be split for two  
TV s, install a 2-Way Signal Splitter  
in the connections.  
If the antenna is not installed properly,  
contact your dealer for assistance.  
NOTE: Cables shown are not included with the TV  
 
Connection Instructions  
PC Setup  
You can use your LCD-TV as a monitor for your personal computer using a VGA  
cable (not supplied).  
Connection and use steps:  
1.Read the userguide supplied with  
your computer and ensure that it has  
a VGAconnector;  
2.Make sure that the power of the LCD  
-TV and thePC are off;  
3.Connect a Dtype 15-pin VGAinterface  
cable ( not supplied ) to the VGAvideo  
interface connector on the PC. Then  
connect the other end to the VGA video  
interface connector on the back of the  
LCD-TV.Tighten the screwson the VGA  
connectors once they are firmly  
connected;  
4.Turn on the power ofthe LCD-TV first,  
and then turn on the power of the PC;  
5.Press the TV/AV button to set the video  
input mode ofthe LCD-TV toPC-RGB;  
6.Check the image on your TV. There may be noise associated with the resolution,  
vertical pattern, contrast or brightness in PC mode. If noise is present, change  
the PC mode to another resolution, change the refresh rate to another rate or  
adjust the brightness and contrast on the menu until the picture is clear. If the  
refresh rate of the PC graphic card can not be changed,change the PC graphic  
card or consult the manufacturer of the PC graphic card.  
 
Connection Instructions  
VCR Setup  
- To avoid picture noise (interference), leave an adequate distance between the  
VCR and TV  
Connection and use steps:  
1.Read the user guide supplied with your AV devices and ensure that it has  
Composite or S-Video connectors;  
2.Make sure that the power of the LCD-TV and the AV device are off;  
Connection Option 1  
Set VCR output switch to 3 or 4 and then  
tune TV to the same channel number.  
Connection Option 2  
1. Connect the audio and video cables from  
the VCR's output jacks to the TV input jacks,  
as shown in the figure.  
When connecting the TV to VCR, match  
the jack colors (Video = yellow,Audio  
Left = white,and Audio Right = red).  
If you connect an S-VIDEO output from  
VCR to the S-VIDEO input, the picture  
quality is improved; compared to conne-  
.
cting a regular VCR to the Video input.  
2. Insert a video tape into the VCR and press  
PLAY on the VCR. (Refer to the VCR owner  
manual.)  
s
3.Turn on the power of the LCD-TV first ;  
and then turn on the power of the AV  
device;  
4.Press the TV/AV button to set the video  
input mode of the LCD-TV to S-VIDEO  
mode or AV mode.  
1
2
VCR  
 
Connection Instructions  
Cable TV Setup  
- After subscribing to a cable TV service from a local provider you can watch cable  
TV programming. The TV cannot display TV programming unless a TV tuner  
device or cableTV converter box is connectedto the TV.  
- For furtherinformation regarding cableTV service, contact your localcable TV  
service provider(s).  
Connection Option 1  
1. Select 3or 4 withchannel switch oncable  
box.  
2. Tunethe TV channel to thesame selected  
output channel oncable box.  
3. Select channelsat the cablebox or with  
the cable boxremote control.  
Connection Option 2  
1. Connect theaudio and videocables from  
the Cable Box'soutput jacks tothe TV  
input jacks, asshown in thefigure.When  
connecting the TV to aCable Box, match  
the jack colors  
(Video = yellow, Audio Left =white, and  
Audio Right= red).  
2. Select theinput source byusing the TV/AV  
button on theremote control.  
3. Select yourdesired channel withthe  
remote control forcable box.  
External AV Source Setup  
How to connect  
Connect the audioand video cablesfrom  
the external equipment'soutput jacks tothe  
TV input jacks, as shown inthe figure.  
When connecting theTV to external equip-  
ment, match thejack colors (Video = yellow,  
Audio Left =white, andAudio Right =red).  
How to use  
1. Select theinput source byusing the TV/AV  
button on theremote control.  
2. Operate thecorresponding external equi-  
pment. Refer toexternal equipment ope-  
rating guide.  
 
Basic Operating Instructions  
Turn on the LCD-TV  
POWER  
TV/AV  
TV/DVD OPEN/CLOSE  
When the POWER  
button is pressed and the LCD-TV  
SCAN  
RECALL  
DISPLAY  
MUTE  
is turned on, the indicator light on the front of the LCD-TV  
changes from red to green. When the LCD-TV is turned off  
using the power button, the LCD-TV will go into standby  
mode and the indicator light turns red.  
1
5
2
6
0
3
4
7
SLEEP  
8
CCD  
9
MTS/SAP  
P.STD  
CH+  
VOL  
-
VOL  
+
MENU  
EXIT  
10+  
CH-  
Note:  
The display of the input mode  
will disappear in3 seconds.  
PC  
STOP  
REV  
PAUSE/STEP  
PREV  
SETUP  
FWD  
SUBTITLE  
NEXT  
TV  
D.MENU  
REPEAT  
A-B  
SLOW  
PLAY/ENTER  
ANGLE  
AUDIO  
TITLE/PBC SEARCH  
PROGRAM  
D.CALL  
ZOOM  
COMPONENT  
AV  
SV  
Switch Among Different Inputs: TV / PC / COMPONENT / AV / SV  
Each time you press the TV/AV button, TV, PC, COMPONENT, AV, SV,  
will appear on the screen in order.  
Audio Control  
1.Press the VOL+ button to increase the volume. A number will appear  
on screen indicating the volume level.  
2.Press the VOL- button to decrease the volume. A number will appear  
on screen indicating the volume level.  
30  
Mute  
1.Press the MUTE button to mute the sound temporarily. A mute icon  
appears on the screen.  
2.Press the MUTE button or VOL+/VOL- again to restore the sound.  
The mute icon disappears.  
 
Basic Operating Instructions  
Select the TV Channel You Want  
You can use the number keys on the remote control to directly select TV  
channels.  
The LCD-TV can store up to 181 channels , and you can press the keys on the  
remote control or on the panel to make a selection.  
Picture Mode  
Press P.STD button on the remote control for menu display . For desired mode as  
follows:  
PERSONAL STANDARD MILD FRESH  
Program Scan  
Press SCAN button to scan through all the memorized TV channels. The scan  
will pause for about 2 seconds on each channel .  
If you want to stop the function during auto scanning, simply press the SCAN  
button again .  
Sleep  
Press SLEEP button to set the time : SLEEP 240-SLEEP 180-SLEEP 120  
-SLEEP 90-SLEEP 60-SLEEP 45-SLEEP 30-SLEEP 15-SLEEP OFF  
This feature allows you to turn off the television after a pre-selected  
number of minutes  
 
Menu Operations  
* In this manual, the OSD (On Screen Display) may be differ from your TV  
These are examples to illustrate the TV's operation.  
Press TV/AV to select the input source. The menu for each source is  
different .  
1. Press MENU button to display the main menu, and VOL+/VOL-to select the  
main menu .  
2. Press CH+/CH- to scroll through the parameters  
3. Press VOL+/VOL- buttons to make changes to the parameters  
4. Press the EXIT button to exit the menu  
Picture Menu Options  
Picture quality can be adjusted for any input separately .  
The picture qualityon the screencan be adjustedas follows:  
1. Press MENU button and VOL+/VOL- until the followingmenu appears  
on the screen.  
PC/COMPONENT MENU  
PICTURE  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
COLOR TEMP  
30  
30  
2
Not available incomponent  
COOL  
30  
TV/AV/SV MENU  
PICTURE  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
COLOR  
50  
50  
2
50  
50  
HUE  
Only available inNTSC system  
Note: Symbols ontop of themenu in thismanual may differ from theactual set display  
 
Menu Operations  
Picture Menu Options continued  
2. Press CH+/CH- button to enter the picture menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired picture quality has been achieved .  
Function:  
BRIGHTNESS :Adjust the brightness of the picture . By increasing the level, it  
will lighten the dark parts of the picture and by decreasing the level it will  
darken the lighter parts of the picture.  
CONTRAST : Adjust the contrast of the picture . The contrast becomes higher as  
the number increases.  
SHARPNESS : Adjust the amount of the detail enhancement , the image  
sharpness rises as the number increases (By increasing the level, it will show  
cleaner and clearer images and by decreasing the level, it will make the picture  
smoother).  
COLOR : Press VOL+/VOL- to adjust the color  
HUE : Adjust the tone of the picture . This will appear and can be adjusted only in  
NTSC mode  
COLOR TEMP : Press to select the color temperature from WARM/NEUTRAL/COOL .  
Sound Menu Options  
Sound can be adjusted for any input as follows:  
1. Press MENU and VOL+/VOL- button until the following menu appears on  
the screen  
SOUND  
50  
50  
30  
70  
VOLUME  
BALANCE  
BASS  
TREBLE  
AUDIO MODE  
AVL  
VOICE  
OFF  
 
Menu Operations  
Sound Menu Options continued  
You can adjust sound options to the levels you prefer.  
2. Press CH+/CH- button to enterthe audio menuand to goup and downto  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option toyour preference .  
4. Repeat step2 and step3 until desiredsound quality hasbeen achieved ..  
Function :  
VOLUME :Adjust the volumeof your TV  
BALANCE : Adjust the balanceof the audiooutput from leftto right . When  
indication value of balance increases toward +50 , sound from the left speaker  
becomes weaker . When indication value of balance decreases toward -50 ,  
sound from the right speaker become weaker .  
BASS : Adjust the bass of the sound . Can only be adjusted under PERSONAL mode .  
TREBLE : : Adjust the treble of the sound . Can only be adjusted under PERSONAL  
mode .  
AUDIO MODE : Press VOL+/VOL- to select amongPERSONAL, VOICE, MUSIC  
and THEATRE .  
AVL: Automatic Volume Limit Control reduces the effect of high volumes by  
limiting the same volume peaks across all channels .  
 
Menu Operations  
Function Menu Options  
Menu Language Selection:  
The OSD menus can be shown onscreen in the various languages. First select the  
system language.  
1. Press MENU button and VOL+/VOL- until the followingmenu appears  
on the screen.  
FUNCTION  
INPUT SOURCE  
LANGUAGE  
CC MODE  
TV  
ENGLISH  
OFF  
BLUE SCREEN  
RESET  
ON  
2. Press CH+/CH- button to enterthe function menuand to goup and downto  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option toyour preference .  
4. Repeat step 2 and step 3 until desired settings have been achieved .  
Functions:  
1. INPUT SOURCE : Display current mode . There are DVD, PC, COMPONENT ,  
AV , SV ,TV to display .  
2. LANGUAGE :Press VOL+/VOL- to select the OSD language.  
3. CC MODE:Press VOL+/VOL-buttons to selectthe Closed Captionoptions.  
Closed Captioning helpsthe hearing impairedwith the broadcastprogram,  
as well as helping children learn how to read. A builtin decoder displays the  
audio portion of a program as text on the screen when this option is selected.  
OFF: When OFFis displayed onTV, it means CC MODE isturned off.  
CC1: When CC1is displayed on TV means CC MODE is turned on.  
CC2 to CC4: For other modes of video related broadcast information.  
TT1: For program guide andother information displayedby broadcasters.  
(This blocks alarge portion ofthe picture onyour screen).  
TT2 to TT4 :For other modes ofinformation displayed bybroadcasters.  
(This blocks a large portionof the picture on yourscreen).  
IMPORTANT: Closed captioningavailability entirely dependson broadcasters  
supplying the signal. Therefore, closed captioning might not always be  
available and languageavailability will differ by broadcast.  
 
Menu Operations  
Function Menu Options Continued  
Note: Select CC1 for full translation of the primary language such as English in  
your area. Select CC2 for secondary language translation such as French or  
any other language that may be broadcast in your area.  
4.BLUE SCREEN: Press VOL+/VOL- to select ON or OFF. To set ON, the screen  
will turn blue after 3 seconds if there is no signal.  
5. RESET : Press VOL+ to reset some settings to the factory default .  
Adjust Menu Options  
1. Press MENU and VOL+/VOL- button until the following menu appears on the  
screen  
ADJUST  
AUTO CONFIG  
PHASE  
CLOCK  
H POSITION  
V POSITION  
0
50  
50  
50  
Note: This menu appears only in PC mode .  
2. Press CH+/CH- button to enter the adjust menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4. Repeat step 2 and step 3 until desired quality has been achieved ..  
Functions:  
AUTO CONFIG : Automatically adjusts picture location frequency and phase  
parameters .  
PHASE : Removes any horizontal distortion and clears or sharpens the displayed  
characters .  
CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency  
H-POSITION : Picture horizontal position adjust  
V-POSITION : Picture vertical position adjust .  
 
Menu Operations  
Tuning Menu Options  
1. Press MENU and VOL+/VOL- button until the following menu appears on the  
screen  
TUNING  
CHANNEL  
SKIP  
AFC  
1
OFF  
ON  
FINE TUNE  
ANTENNA  
AUTO PROGRAM  
CATV  
Note: This menuappears only inTV mode .  
2. Press CH+/CH- button to enter the tuning menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to increase and decrease the level to adjust the  
selected option to your preference .  
4.Repeat step 2 and step 3 until desired settings have been achieved .  
Functions:  
1. CHANNEL : Press VOL+/VOL-to go up and down to set the channel position.  
The display will show the current playing channel.  
Channel Coverage by Antenna:  
Antenna Type  
VHF  
UHF  
Channel Range  
2-13  
14-69  
CATV  
1-125  
2.SKIP : If you want skip a channel , press VOL+/VOL- to select ON , and this  
channel will be skipped next time when you press CH+/CH- . You can press  
the digit buttons to select the channel . If you want to restore the channel , select  
OFF.  
3. AFC : Auto frequency control. Select ON toimprove image quality .  
 
Menu Operations  
Tuning Menu Options Continued  
4. FINE TUNE : If the image and / or sound received is not very good , you can  
press CH+/CH- to select FINE TUNE in the menu. Then , press VOL+/VOL-  
button to adjustand improve theimage quality. Do notuse this featureunless  
reception is poor.  
5. ANTENNA: Press VOL+/VOL- button to selectAIR (VHFand UHF) andCATV  
reception preference.  
6. AUTO PROGRAM : Auto search and program channels .Press the VOL+ button  
to start the automatic search function operation. All channels now available  
will be automatically preset in order .After the search has finished,  
the first program number will display on the screen. This search automatically  
adds only the active channels in your area to the TV's memory. It deletes any  
channels on which there is no broadcast or a poor signal.  
Note: The AUTO PROGRAM function will scan the channels on the selected  
antenna input. If the TV is connected to cable, please select CATV under  
' ANTENNA ' sub menu.  
Parental Menu Options  
1. Press the MENU and VOL+/VOL- button until thefollowing menu appears  
on the screen .  
2. Press CH+/CH- button to select PASSWORD .  
PARENTAL  
PASSWORD  
----  
3. Then input the password0000. It will bring parental menu display on the  
screen. You will see the ollowing menu on your screen:  
PARENTAL  
CHILD LOCK  
MPAA  
PG RATING  
PG CONTENTS  
CAN. ENGLISH  
CAN. FRENCH  
CHANGE PASSWORD  
OFF  
PG  
TV-14  
--DV--  
C8+  
8+  
 
Menu Operations  
Parental Menu Options Continued  
This function enables you to block certain TV channels in accordance to the  
requirements established by the FCC.  
2. Press CH+/CH- button to enter the PARENTAL menu and to go up and down to  
select the desired option .  
3.Press VOL+/VOL- button to go into PG RATING and MPAA  
Press VOL+/VOL- button to setthe CHILD LOCK ON and PARENTAL LOCK OFF.  
4. Repeat step 2 and step 3 until desired quality has been achieved .  
CHILD LOCK: Child Lock off means the lock function is turned off . If the  
Child Lock is in "off" mode then function will not be active to accept the  
Parental Guidance signal. Child Lock on means the lock function is turned on. If the  
lock is in the "on" mode then it actively accepts the Parental Guidance signal.  
MPAA: When MPAA rating is selected, you can select OFF/G/PG/PG-13  
R/NC17/X .  
PG RATING:Select the TV Rating option. You can select from OFF/TV-Y/TV-Y7/  
TV-G/TV-PG/TV-14/TV-MA.  
PG CONTENTS: Press to set the grade of the program . When there is this  
grade of program , this program will not be display .  
CAN. ENGLISH: Select this option. You could select from OFF/E/C/C8+/G/PG/  
14+/18+ .  
CAN. FRENCH: Select this option. You could select from OFF/E/G/8+/13+/16+/  
18+ .  
CHANGE PASSWORD: The "Default Password" preset by the manufacturer is  
"0000" . Ifyou want to change the preset password to your own password, just  
choose any four digits that can be easily remembered and set. Once you set  
password for a particular channel, that channel will be blocked.  
 
Menu Operations  
Parental Menu Options Continued  
PARENTAL LOCK TECHNOLOGY:  
The "P.L. Technology" allows you to use U.S. and Canadian Movies and TV  
PROGRAMS Guide ratings to block certain types of TV programs and movies.  
To clearly understand TV program rating codes, read the following information:  
U.S. TV Program Ratings  
NR: Not Rated-this means that programs are not rated or rating does not apply.  
TV-Y: For all children - these types of rated programs are designed for a very young  
audience, including children from ages 2-6.  
TV-Y7: Directed towards older children - this type of rated programs may include  
comedic violence of mild physical, or may frighten children under the age of 7.  
TV-G: General audience - these types of rated programs contains little or no  
violence, no strong language, and little or no sexual dialogue and situations.  
TV-PG:Parental Guidance Suggested-this type of rated programs may contain  
limited violence, some suggestive sexual dialogue and situations, and rare  
language.  
TV-14: Parents strongly cautioned-these types of rated programs may contain sexual  
content, strong language and more intense violence.  
TV-MA:Mature audience only these types of rated programs may contain sexual  
violence, explicit sexual content and profane language.  
FV: This type of rated programs contain Fantasy and cartoon violence.  
Violence: This type of rated programs contain violence.  
S:  
L:  
D:  
This type of rated programs contain sex.  
This type of rated programs contain offensive language.  
This type of rated programs contain dialogue with sexual content.  
 
Menu Operations  
Parental Menu Options Continued  
To understand clearly about movie rating codes, read the following list:  
U.S. Movie Rating Chart  
NR: This means movie is not rated yet. It is pending government rating approval.  
G:  
General Audience-this type of movie rating means all ages admitted to see  
the movie.  
PG-13:Parents Strongly Cautioned - this type of movie rating means some material  
may not be appropriate for children under13.  
R:  
Restricted- This type of movie rating means children under 17 of age require  
to be with parent or guardian.  
NC-17:This type of movie rating means no one 17 and under admitted.  
X: This type of movie rating means adults only.  
To clearly understand Canadian program rating codes, read the  
following list:  
Canadian English Rating Chart  
E: These types of programs are exempt from the rating system. Exempt  
programming includes: news, sports, documentaries, talk shows, music  
videos, and variety of other programs.  
C: This type of programming is intended for children under age 8. There is no  
offensive language, nudity or sexual content.  
C8+:These types of rated programs are generally considered acceptable for children  
8 years and over. There is no profanity, nudity or sexual content.  
G: These types of rated programs are generally suitable for all audiences.  
PG: Parental Guidance Suggested -in these types of rated programs, some material  
may not be suitable for children.  
14+: In these types of rated programs, some content may not be suitable for viewers  
under the age of 14.Parents are strongly cautioned not to have their children  
view 14+ rated programs by pre-teens and early teens.  
18+: Adults Only-these types of rated programs are only for adult viewers only.  
 
DVD Features  
Basic Playback  
Preparations  
Stop playback  
1. Press STOP  
button to go to stop mode, the TV  
Press the TV/DVD button on the remote control or  
the TV to enter the DVD status.  
screen will show the start logo. With some discs,  
such as DVD or CDs, the player can resume  
playback from the point where it was stopped.  
2. Press PLAY/ENTER to resume playback from the  
location where the playback was stopped.  
3. Press STOP twice to stop completely.  
Basic playback  
1. Press OPEN/CLOSE to open the disc tray,  
place a disc in the disc tray. If there is no disc  
placed on the disc tray in DVD mode, OPEN will  
display on the screen all the times)  
There is only one disc size . Place the  
disc in the guide on the disc tray. If the  
disc is out of the guide, it may damage the disc  
and cause the DVD player to malfunction.  
Do not place a disc which is unplayable in this  
DVD player.  
Previous and Next  
During Playing, pressing the PREV  
keywill  
restart the currentchapter and skip chapters  
backwards with each subsequent press until the  
start of thedisc is reached.  
Each press ofNEXT key duringplaying will  
skip the currentchapter and play the next one.  
2. Press OPEN/CLOSE to close the disc tray, the  
playback will automatically start.  
Some discs do not start automatically. Press  
PLAY/ENTER tostart playback.  
Fast forward and Fast reverse  
3. Some discs may start playback with a menu. Use  
the cursor buttons on the remote control to select  
menu options and press PLAY/ENTER to start. You  
may also press the digit buttons to select a menu  
option directly. Many DVDs will not allow this during  
start-up.  
1. Press FWD  
to fast forward through the disc.  
button is pressed, the  
Each time the FWD  
fast forward motion speed changes.  
2. Press PLAY/ENTER to resume normal playback.  
3. Press REV  
to fast reverse through the disc.  
button is pressed, the  
Each time the REV  
Pause playback  
fast reverse motion speed changes.  
4. Press PLAY/ENTER to resume normal playback.  
1. Press PAUSE/STEP to pause playback (still mode).  
The sound will be muted during still mode.  
2. Press PLAY/ENTER to resume normal playback.  
Single step playback  
1. When paused, press PAUSE/STEP continuous  
to single step forward to the next frame in the  
video.  
2. Press PLAY/ENTER to resume normal playback.  
 
DVD Features(Continued)  
Advanced Playback  
IMPORTANT NOTE:  
ALL DESCRIBED FUNCTIONS AFOR DVD DISCS. IF YOU PLAY OTHER DISC  
FORMATS THE OPERATION AND ON SCREEN DISPLAY WILL BE DIFFERENT.  
PROGRAM  
SUBTITLE  
Press " SUBTITLE ", the screen will display "SUBTI-  
TLE 01/XX XXXXX", "01" indicates the ordinal  
number of this language; "XX" indicates total number  
of language; "XXXXXX" indicates the language of  
country. (the number of language depends on disc).  
This function can select up to 32 languages display-  
ed on screen.  
When playing discs, press "PROGRAM" to enter  
program mode. Press the digit buttons to select the  
program number that you want. When finished move  
the cursor to select "START" . This will start the  
program playback.  
SEARCH  
REPEAT  
Press "SEARCH" once to display the search  
menu. Press the button again to select. Press  
the program number buttons to input the item  
you require. Press PLAY/ENTER to confirm.  
Press " REPEAT " and Chapter repeat will be  
displayed on screen, the second press will display  
Title repeat, the third press will display All repeat,  
the fourth press will cancel this function.  
SLOW  
A-B  
Press SLOW to play a disc in slow motion. Each  
time the SLOW button is pressed, the slow  
motion speed changes.  
Press " A-B " to begin start-point, press again  
to set an end point and complete setting. The  
selected section A-B will be repeated. The third  
press will cancel this function.  
Press PLAY/ENTER to resume normal playback;  
Note: This function dose not work for CD and MP3.  
ANGLE  
TITLE/PBC  
When enjoying sports, concert or theatre, press this  
key to watch same actions in different angles. (Valid  
for discs possessing this function. Using a disc  
recorded in multi-angle you can view the scene from  
different angles,for example,front, side, whole view  
and exterior scene).  
With some DVD discs pressing this key will display  
the title menu. You can then use the digit buttons  
to select the item you prefer.  
AUDIO  
D.MENU  
Press this key can change the mode of audio.  
such as: Audio 1/2: AC 3 2 CH English  
Audio 2/2: AC 3 5.1 CH English  
Press this key to display the root menu, select  
items according to your preference. (This  
function will work on a DVD with a multi-layer  
menu.)  
Press this button to cycle between Mono Left, Mono  
Right, Mix-Mono and Stereo.  
Note: When press this button continuously, you must  
allow a 3 second interval between selections.  
D.CALL  
Pressing this key will cycle through "Title Elapsed",  
"Title Remain", "Chapter Elapsed", "Chapter Remain"  
and "Display off ".  
 
Special Function Playback  
JPEG DISC PLAYBACK  
When a disc containing standard JPEG picture files is inserted into the player, a  
navigation menu will be displayed automatically. Use theUP and DOWN cursor  
buttons to select a file then press PLAY/ENTER. The slide show will commence.  
Press PREVIOUS or NEXT to move between pictures. Press pause to stop on the  
current picture. Press PLAY/ENTER to resume normal playing.  
A JPEGdisc contains JPEG (.jpg) format picture information that can be decoded  
by a micro-computer software and displayed through the video output interface or on  
the television screen.  
This function has many applications. For example one can save files from a scanner  
or digital camera in the JPEG format, record these on a CD-R disc and present them  
to an audience through this player.  
The JPEG format is a convienient method to store images in a small amount of  
memory space, and is ideal for archiving information.  
MP3 PLAYBACK  
When playing anMP3 disc, anavigation menu willbe displayed automatically. In themenu, use UP  
or DOWN cursorbuttons to choosethe folder, then press PLAY/ENTER to enterthe folder. Use the  
UP and DOWNcursor buttons toselect the fileand press PLAY/ENTER. Pressing theLEFT cursor  
button will takeyou to theprevious screen/menu.  
SCREEN SAVER FUNCTION  
This unit employs a screen savermode to helpprotect the tubeduring static videopictures. This can  
be turned offon the GENERALSETUP PAGE.  
 
DVD System Setup  
DVD System Setup  
General Setup Process  
1.Press the SETUP button, the  
General Setup Page,Preference  
Page will be displayed in turn.  
SETUP  
..General Setup Page..  
.
3:Ps  
.
3:Lb  
Tv Display  
Angle Mark  
Osd Lang  
Caption  
LB  
4
On  
4
2.Press to select, the  
or  
item, then press to enter the  
submenu.  
ENG  
On  
16  
9
Screen Saver Off  
PLAY/ENTER  
or  
3.Press to select then  
press PLAY/ENTER to confirm.  
4.Press EXIT or press SETUP  
repeatedly to exit the set-up  
menus.  
..Preference Page..  
Parental  
Password  
Default  
1 Kid Saf  
2 G  
3 Pg  
4 Pg 13  
5 Pgr  
6 R  
7 Nc17  
8 Adult  
General Setup Page  
ASPECT RATIO DESCRIPTION  
When using the DVD with the internal TV,  
select 4 3/LB.  
..General Setup Page..  
The following information applies only  
when the DVD output is connected to an  
external TV.  
.
3:Ps  
.
3:Lb  
Tv Display  
Angle Mark  
Osd Lang  
Caption  
LB  
4
On  
4
ENG  
On  
16  
9
SETUP  
Screen Saver Off  
4:3/PS (PS = Pan and Scan)  
You may select if you have a normal aspect  
ratio (4:3) TV, although the NORMAL/LB  
(letter box) is a more common choice. In PS  
mode, widescreen material will fill the screen, but at the expense of chopping  
off extreme left and right edges of the original film picture. For this feature to  
work, the disc must be specially coded. Such discs are uncommon.  
4:3/LB (LB = Letter Box)  
PLAY/ENTER  
You may select this if you have a normal aspect ratio (4:3) TV. Widescreen  
material will be shown in pure unaltered form, allowing the entire picture area  
of the original film to be viewed without any side cropping. Black bars will  
appear above and below the picture.  
16:9  
You may select this if you have a widescreen (16:9) TV. Back bars may still  
appear above and below the picture even if using a widescreen TV. This is  
because some film directors prefer to use ultra widescreen aspect ratios e.g.  
2.35:1. This will normally be indicated on the DVD packaging.  
 
DVD System Setup(Continued)  
DVD System Setup  
General Setup Page  
..General Setup Page..  
Tv Display  
Angle Mark  
Osd Lang  
Caption  
LB  
On  
ANGLE MARK: Users can select a particular  
.
camera angle when playing a DVD which offers  
On  
Off  
ENG  
On  
multiple angles.  
This item allows you to set Angle Mark ON or OFF.  
Screen Saver Off  
..General Setup Page..  
On Screen Display (OSD) Language: Users  
can select on-screen display language.  
Tv Display  
Angle Mark  
Osd Lang  
Caption  
LB  
On  
ENG  
On  
English  
Spanish  
Screen Saver Off  
..General Setup Page..  
Tv Display  
Angle Mark  
LB  
On  
CAPTION: This function allows you to display or  
hide the caption.  
Osd Lang  
Caption  
ENG  
On  
On  
Off  
Screen Saver Off  
..General Setup Page..  
SCREEN SAVER: If the screen saver is on, then  
there will be an animated picture of DVD on the  
screen whenever the DVD player is idle for more  
than 3 minutes .  
Tv Display  
Angle Mark  
LB  
On  
Osd Lang  
Caption  
ENG  
On  
Screen Saver Off  
On  
Off  
 
DVD System Setup(Continued)  
DVD System Setup  
Preference Page  
The Preference Page is only available when there is no disc  
in the player. These settings are applied consistently to all  
discswhichareinsertedandplayed.  
SETUP  
PARENTAL: The parental  
control function works in  
..Preference Page..  
1 Kid Saf  
2 G  
3 Pg  
4 Pg 13  
5 Pgr  
6 R  
7 Nc17  
8 Adult  
Parental  
conjunction with the  
different censorship classes  
assigned to DVDs. These  
classes help to control the  
Password  
Default  
PLAY/ENTER  
types of DVDs that the family  
watches, There are up to 8  
censorship classes for DVDs.  
Note:  
1 To change this setting you must enter your password.  
(Initial password is 1234)  
2 When set to OFF, all discs may be viewed.  
PASSWORD CHANGE:  
You can change your password by  
entering 4 digits. You must confirm  
the 4 digits before the new password  
can be accepted.  
SETUP  
..Preference Page..  
Parental  
Password  
Default  
Change  
PLAY/ENTER  
Old Password  
New Password  
Confirm Pwd  
NOTE:If you forgetyour password  
or a password is accidentally set  
enter 1369 as the password. This  
will enable you to regain control.  
 
DVD System Setup(Continued)  
DVD System Setup  
DEFAULT: Resets all settings  
SETUP  
..Preference Page..  
(except password and parental  
lock status) for this DVD player  
back to the manufacturers  
original settings. Press ENTER  
to perform the reset.  
Parental  
Password  
Default  
Reset  
PLAY/ENTER  
Note:  
Some functions may not be available depending on the type of disc.  
 
Playable Discs  
The following discs can be played:  
You cannot play discs other than those listed above.  
You cannot play non-standardized discs, even if they may be labelled as above.  
The performance of CD-R or CD-RW disc depends on the way the disc was burned. In a few cases,  
their performance may not be consistant or may not even operate at all.  
This DVD Playeris designed andmanufactured according tothe Region Management  
Information that isrecorded on aDVD disc. Ifthe Region numberdescribed on theDVD disc  
does not correspondto the Regionnumber of thisDVD Player, this DVD playerwill not play  
that disc.  
This Region numberof this DVDPlayer is .  
1
 
Disc Protection and DVD Characteristics  
Compare DVD disc with other discs:  
DVD  
LD  
SVCD  
VCD  
CD  
Digital/  
MPEG I  
Encode  
method  
Digital/MPEG  
Digital  
Digital  
Analog  
Single- Double Single- Double-  
side  
-side  
side  
side  
650MB  
650MB  
650MB  
Capacity  
single- single double- double-  
layer  
4.7G  
-layer layer  
layer  
17G  
8.5G  
9.4G  
Single-side  
60 minutes  
double-side  
120 minutes  
133  
minutes minutes minutes minutes  
242  
266  
484  
45 minutes 74 minutes 74 minutes  
Playing Time  
Disc diameter  
12cm  
30cm/20cm  
12cm  
12cm  
12cm  
No more than  
430 line  
Horizontal  
resolution  
No more than No more than  
More than 500 line  
350 line  
250 line  
Picture  
proportion  
One kind  
One kind  
Multiple kinds  
32 kinds  
One kind  
16 kinds  
at most  
Subtitle  
4 kinds  
4 kinds  
at most  
4 kinds  
at most  
Language  
2 kinds  
2 kinds  
8 kinds  
48KHz, 96KHz/  
6, 20, 24bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
44.1KHz/  
16bit  
Sound quality  
 
Troubleshooting Guide  
To assist in location possible faults use help guide below.  
Troubleshooting  
Verify ifthe television isproperly plugged in.  
Verify ifthe television isproperly supplied withpower.  
Verify thatelectricity is available.  
No picture, no sound  
Verify if correct signals are input.  
Press TV/AV button to change signal input to TV input.  
Restart the television of power supply is interrupted.  
Blank screen  
Press MUTE buttonand verify ifMute mode ison.  
Switch to anotherchannel and verifyif the sameproblem  
happens.  
No sound  
Press VOL+ buttonto see ifthe problem canbe solved.  
Verify ifsound system isfunctional. Refer tochapter on  
adjusting.  
Poor sound  
Verify ifcorrect channel isselected.  
Adjust the antenna.  
Make adjustments byFINE TUNE  
No picture in some  
channel  
Verify if the same problem exists in other channels.  
Check picture and sound systems.  
Refer to relative instructions in the Manual for color  
adjust.  
No color for some channel  
program (black and white)  
Verify ifthe antenna iscorrectly connected.  
Verify ifthe antenna isin good condition.  
Make fine adjustmentof channel.  
Spots with some or  
all pictures  
Disconnect the televisionfrom power supplyand, 10  
seconds later, reconnect to thepower supply.  
If the problemstill exists, contactan authorized  
service depot fortechnical assistance.  
Abnormal functioning  
Note:  
1.If the fault can not be repaired using the above guide consult with your local authorized  
service center.  
2.The TV set must only be repaired by a qualified registered service person. Never attempt to  
remove the backcover as theTV set has dangerous voltageslevels inside thatmay be  
fatal or causefire.  
 
Specifications  
Specifications of the television that you have just purchased may  
vary from the information in this table due to technical innovations.  
Model  
HLTDC15  
HLTDC19  
NTSC-M  
HLTDC20  
Picture, sound  
system  
Audio output  
1.5W+1.5W  
AV input PC input S-VIDEO input PC audio input  
Headphone output YPbPr input Antenna input  
External input port  
~120V 60Hz  
Power requirements  
Power consumption  
Temperature  
60W  
80W  
80W  
Working:+5 ~+35  
Storage:-10 ~+45  
Remote control  
Batteries  
User manual  
Warranty card  
Accessories  
NOTE  
Design and specifications are subject to change without notice.  
Dimensions quoted in this manual are approximate.  
 
Warranty  
Warranty  
One year parts  
and Labor Carry in for 27" or less and in home for  
32" and above .  
 
V0.1  
0090508051C  
 

Graco Heat Pump 309004C User Manual
Grizzly Nail Gun H7945 User Manual
Hamilton Beach Toaster 22524E User Manual
Harbor Freight Tools Drill 60238 User Manual
Harbor Freight Tools Grinder 94186 User Manual
Harman Kardon Stereo System DPR 1005 User Manual
Honeywell DVR HRHD 410 User Manual
Hotpoint Clothes Dryer THDP 871 User Manual
Hughes Kettner Stereo Amplifier VS 250 User Manual
Impex Fitness Equipment MD 843 User Manual