Grizzly Work Light H8027 User Manual

MODEL H8027  
Heavy-Duty Bar Clamp Heads  
INSTRUCTION SHEET  
To assemble:  
Note: Make sure holes are at least 3 in. from the  
ends of the board so that the board will not split when  
stressed.  
1. Select a dry, straight wooden board of the dimensions  
shown in Figure 1.  
3. Using the hex bolts and nuts provided, mount the two  
bar clamp heads (see Figure 3).  
2. Drill as many 716 in. holes as desired along the length of  
the board, at least 3 in. apart and 34 in. on center from  
the top of the board (see Figure 2).  
If you need help with your new bar clamp heads, call our  
Tech Support at: (570) 546-9663.  
 
 
 
�  
 
 
�  
Figure 1. Wood dimensions.  
Figure 2. Drilled hole dimensions.  
Figure 3. Bar clamp heads mounted.  
COPYRIGHT © AUGUST, 2006 BY GRIZZLY INDUSTRIAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
#TS8466 PRINTED IN CHINA  
 

Graco Marine Sanitation System 295616 User Manual
Grizzly Power Roller G5771 User Manual
Hamilton Beach Toaster 840172501 User Manual
HANNspree Flat Panel Television MAK 000004 User Manual
HANNspree Flat Panel Television ST49 10A1 User Manual
Hasbro Games 123 Game User Manual
HP Hewlett Packard Network Card HP Smart Array 256MB User Manual
HP Hewlett Packard Personal Computer C7J85US#ABA User Manual
iHome MP3 Docking Station iH17 User Manual
IKEA Microwave Oven IMH15XR User Manual