model h0759
red shelf cart–
2 shelves
instructions
the Model h0759 is convenient for all around
shop use. this utility cart can tote around tools,
parts, or inventory and requires a very small foot
print.
recommended tools
Wrench/socket 10mm ....................................... 1
Wrench/socket 17mm........................................ 1
standard screwdriver........................................ 1
specifications
assembly
1. insert the two handles through the holes at
either end of the top shelf (see figure 2).
Weight .......................................................29 lbs.
load Capacity .........................................220 lbs.
dimensions....................... 16"W x 291⁄2"l x 34"h
top shelf height.......................................... 291⁄4
"
distance Between shelves............................. 16"
shelf depth....................................................31⁄2
"
handles
inventory (figure 1)
a. top shelf.................................................... 1
b. Bottom shelf............................................... 1
c. handles ...................................................... 2
d. locking swivel Casters .............................. 2
e. swivel Casters............................................ 2
f. hardware Bag ............................................ 1
—slotted screws M6-1 x 35..................... 24
—hex nuts M6-1...................................... 24
—Flat Washers 6mm ............................... 24
—lock Washers 6mm.............................. 24
x 12
top shelf
figure 2. handles secured to top shelf.
2. align the mounting holes in the top shelf and
handles, then fasten with (12) M6-1 x 35 slot-
ted screws, flat washers, lock washers, and
hex nuts (see figure 2). position the slotted
screws on the shelf exterior and the wash-
ers and hex nuts on the shelf interior. Finger
tighten the fasteners for now.
a
B
d
C
e
F
figure 1. h0759 inventory.
Copyright © july, 2008 By grizzly industrial, inC.
Warning: no portion of this manual may be reproduced in any shape
or form Without the Written approval of grizzly industrial, inc.
#Bl10947 printed in China
|