Graco Inflatable Bouncy Toy 309419D User Manual

INSTRUCTIONS-PARTS LIST  
ELECTROSTATIC AIR SPRAY  
309419D  
ENG  
Air Caps and Fluid Nozzles  
Important Safety Instructions  
Read all warnings and instructions in this manual.  
Save these instructions.  
FAN PATTERN FLUID NOZZLES  
Fluid Nozzle  
Orifice Size  
PROt Xs Gun  
Fluid Nozzle Part No.  
197263  
197264  
0.75 mm (0.030 in.)  
1.0 mm (0.042 in.)  
1.2 mm (0.047 in.)  
1.5 mm (0.055 in.)  
1.8 mm (0.070 in.)  
2.0 mm (0.080 in.)  
0.75 mm (0.030 in.)  
1.0 mm (0.042 in.)  
1.2 mm (0.047 in.)  
1.5 mm (0.055 in.)  
1.8 mm (0.070 in.)  
2.0 mm (0.080 in.)  
197265  
197266  
197267  
197268  
249920*  
249921*  
249922*  
249923*  
249924*  
249925*♦  
* Glass reinforced acetal construction.  
The 2.0 mm (0.080 in.) nozzles must be used with  
air cap 24A439.  
 
WARNING  
Always turn off the power, air, and fluid supply to the gun, and trigger the gun to relieve system pressure before  
installing or removing the air cap/fluid nozzle assembly. This will help reduce the risk of serious injury, including  
splashing in the eyes or on the skin, or electric shock.  
NOTE: Refer to your air spray gun instruction manual to install the air cap and fluid nozzle. If you do not have a  
copy of the manual, copies are available at no charge from Graco Inc.  
Terms  
Viscosity  
Fan Pattern Production Rate  
Light Production:  
Fluid flow of up to 200 cc/min.  
(7 oz./min.)  
Light: 20 centipoise at 21_C (70_F)  
Medium: 70 centipoise at 21_C (70_F)  
Medium Production: Fluid flow of up to 400 cc/min.  
Heavy: 160, 260 centipoise at 21_C (70_F)  
High Solids: Over 360 centipoise at 21_C (70_F)  
(14 oz./min.)  
Fluid flow of up to 600 cc/min.  
(20 oz./min.)  
High Production:  
Round Pattern Production Rate  
Centipoise = centistokes x fluid specific gravity.  
Light Production:  
Fluid flow of up to 150 cc/min.  
(5 oz./min.)  
NOTE: Refer to the Viscosity Conversion Chart on  
the back cover to convert to other units of measure-  
ment.  
Medium Production: Fluid flow of up to 200 cc/min.  
(7 oz./min.)  
How to Use the Fluid Nozzle Graphs  
2. The thick vertical line in each graph represents the  
KEY  
target flow rate for that nozzle size. Find the graph  
that has the marked point closest to the thick  
vertical line. This is the recommended nozzle size  
for your application. Significantly exceeding the  
target flow rate may result in lower spray perfor-  
mance due to excessive fluid viscosity.  
260 Centipoise Fluid  
160 Centipoise Fluid  
70 Centipoise Fluid  
20 Centipoise Fluid  
Use the procedure below to select the proper fluid  
nozzle for your application.  
3. From the marked point, move across to the vertical  
scale to find the required fluid pressure. If the  
required pressure is too high, then use the next  
largest nozzle size. If the fluid pressure is too low  
(< 0.35 bar, 3.5 kPa, 5 psi), then use the next  
smallest nozzle size.  
1. For each of the fluid nozzle graphs, find the point  
on the graph corresponding to your desired fluid  
flow rate and viscosity. Mark the point on each  
graph with a pencil.  
309419  
3
 
Fluid Nozzle Performance Graphs  
Fluid pressures are measured at the spray gun inlet.  
ORIFICE SIZE: 0.75 mm (0.030 in.)  
ORIFICE SIZE: 1.2 mm (0.047 in.)  
Bar/PSI  
Bar/PSI  
50  
50  
45  
40  
35  
30  
25  
20  
15  
10  
45  
40  
35  
30  
25  
20  
15  
10  
3.0  
3.0  
2.5  
2.0  
1.5  
2.5  
2.0  
1.5  
1.0  
0.5  
1.0  
0.5  
5
5
0
1
2
3
4
5
6
7
8
9 10  
0
5
10  
15  
20  
25  
30  
oz./min.  
oz./min.  
cc/min.  
cc/min.  
60  
120  
180  
240  
300  
200  
400  
600  
800  
FLUID FLOW  
FLUID FLOW  
ORIFICE SIZE: 1.0 mm (0.040 in.)  
ORIFICE SIZE: 1.5 mm (0.059 in.)  
Bar/PSI  
Bar/PSI  
50  
50  
45  
40  
35  
30  
25  
20  
15  
10  
45  
40  
35  
30  
25  
20  
15  
10  
3.0  
3.0  
2.5  
2.0  
1.5  
2.5  
2.0  
1.5  
1.0  
0.5  
1.0  
0.5  
5
5
0
5
10  
15  
20  
25  
30  
0
5
10  
15  
20  
25  
30  
oz./min.  
oz./min.  
cc/min.  
cc/min.  
200  
400  
600  
800  
200  
400  
600  
800  
FLUID FLOW  
FLUID FLOW  
Performance Graphs are continued on page 5.  
309419  
4
 
Fluid Nozzle Performance Graphs  
Fluid pressures are measured at the spray gun inlet.  
ORIFICE SIZE: 1.8 mm (0.070 in.)  
ORIFICE SIZE: 2.0 mm (0.080 in.)  
Bar/PSI  
Bar/PSI  
50  
20  
1.4  
1.2  
1.0  
45  
40  
35  
30  
25  
20  
15  
10  
18  
16  
14  
12  
10  
8
3.0  
2.5  
2.0  
1.5  
0.8  
0.6  
6
0.4  
0.2  
1.0  
0.5  
4
5
2
0
5
10  
15  
20  
25  
30  
0
5
10  
15  
20  
25  
30  
oz./min.  
oz./min.  
cc/min.  
cc/min.  
200  
400  
600  
800  
200  
400  
600  
800  
FLUID FLOW  
FLUID FLOW  
Viscosity Conversion Chart  
High  
High  
Measurement  
Light Medium Heavy Solids  
Measurement  
Light Medium Heavy Solids  
Poise  
0.2  
20  
32  
13  
30  
15  
12  
10  
0.7  
70  
2.6  
3.6  
Zahn 1  
37  
Centipoise  
260  
360  
Zahn 2  
18  
30  
Du Pont Parlin 7  
Du Pont Parlin 10  
Fisher 1  
Zahn 3  
30  
21  
13  
41  
28  
18  
20  
Zahn 4  
Zahn 5  
Fisher 2  
33  
36  
Sears Craftsman Cup  
Redwood No. 1 Sec.  
Redwood No. 2 Sec.  
Engler Degrees  
Saybolt Furol Sec.  
23  
286  
30.05  
9.4  
Ford Cup 3  
98  
1060  
105.6  
34.65  
124.5  
1465  
149  
Ford Cup 4  
28  
68  
58  
Krebs Units KU  
35  
62  
2.9  
47.75  
171.5  
Saybolt Universal  
SSU  
100  
370  
1280  
1730  
35  
Shell 2  
Shell 3  
Shell 4  
40  
15  
48  
22  
309419  
5
 
Air Cap Comparison  
Air Cap  
Part No.  
Air Cap  
Color  
Pattern  
Shape  
Transfer  
Efficiency  
Atomization  
Best  
Cleanliness  
Good  
24A438  
24A279  
24A376*  
24A276*  
24A377*  
24A378*  
24A274  
24A439  
24A275  
Grey  
Grey  
Grey  
Blue  
Round End  
Round End  
Better  
Better  
Best  
Better  
Better  
Better  
Better  
Better  
Good  
Good  
Tapered End  
Tapered End  
Tapered End  
Tapered End  
Tapered End  
Tapered End  
Tapered End  
Better  
Better  
Better  
Better  
Best  
Best  
Red  
Best  
Green  
Grey  
Grey  
Grey  
Best  
Good  
Good  
Best  
Best  
Better  
Best  
Good  
* Identical except color  
Air Cap Compatibility Chart  
Recommended  
Replacement  
Part No.  
197477  
197478  
197479  
197480  
197481  
24A438  
24A376  
24A274  
24A279  
24A439  
6
309419  
 
Air Consumption Charts  
24A438  
24A279  
25  
20  
15  
10  
5
25  
20  
15  
10  
5
0
0
5/16 in. x 25 ft hose  
5/16 in. x 50 ft hose  
20230405056067080  
2023040506067080  
Wall Pressure (psi)  
Wall Pressure (psi)  
Test Conditions  
24A376, 24A276,  
24A277, 24A278  
24A274  
D Fan valve adjusted full open  
D PRO Xs4 Gun  
25  
25  
20  
15  
10  
5
20  
15  
10  
5
0
0
202303404506067080  
202304050560670780  
Wall Pressure (psi)  
Wall Pressure (psi)  
24A439  
24A275  
25  
20  
15  
10  
5
25  
20  
15  
10  
5
0
0
202303404506067080  
2030405056067080  
Wall Pressure (psi)  
Wall Pressure (psi)  
309419  
7
 
Graco Standard Warranty  
Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the  
date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco,  
Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be  
defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written  
recommendations.  
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by  
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or sub-  
stitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of  
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,  
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.  
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for  
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The  
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect  
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and  
transportation.  
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT  
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other  
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any  
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the  
date of sale.  
Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection  
with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured  
by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide  
purchaser with reasonable assistance in making any claim for breach of these warranties.  
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment  
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,  
breach of warranty, the negligence of Graco, or otherwise.  
FOR GRACO CANADA CUSTOMERS  
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings  
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnais-  
sent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires  
exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.  
Graco Phone Number  
TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor closest to you:  
1–800–328–0211 Toll Free  
612–623–6921  
612–378–3505 Fax  
All written and visual data contained in this document reflects the latest product information available at the time of publication.  
Graco reserves the right to make changes at any time without notice.  
This manual contains English. MM 309419  
Graco Headquarters: Minneapolis  
International Offices: Belgium, China, Japan, Korea  
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441  
Copyright 2001, Graco Inc. is registered to ISO 9001  
Revised 12/2009  
8
309419  
 

Grindmaster Coffeemaker C 1S User Manual
GSI Outdoors Fan 2TAF User Manual
Haier Dishwasher DWL2825 User Manual
Harbor Freight Tools Battery Charger 45005 User Manual
Heat Glo LifeStyle Indoor Fireplace Dakota 42 B User Manual
Heath Zenith Home Safety Product BL 5511 User Manual
HP Hewlett Packard Life Jacket LC 2000 User Manual
Humminbird Fish Finder Wide One User Manual
IBM Garage Door Opener 38 User Manual
IBM Projector VT47 User Manual