USER’S GUIDE
V:1630-0629-10
TD930
9” Everywhere TV + DVD
For the most up-to-date version of this User’s Guide, go to www.gpx.com
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
Read these Instructions.
FCC Warnings
Keep these Instructions.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Heed all Warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the
polarized or grounding - type plug. A
polarized plug has two blades with one wider
than the other. A grounding type plug has
two blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. When the provided plug does
not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
8.
9.
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for
help.
Additional Warnings
•
The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on apparatus.
L’appareil ne doit pas être exposé aux écoulements ou aux
éclaboussures et aucun objet ne contenant de liquide, tel qu’un
vase, ne doit être placé sur l’objet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified
by the manufacturer.
•
Main plug is used as disconnect device and it should remain
readily operable during intended use. In order to disconnect the
apparatus from the mains completely, the mains plug should be
disconnected form the mains socket outlet completely.
La prise du secteur ne doit pas être obstruée ou doit être
facilement accessible pendant son utilisation. Pour être
complètement déconnecté de l’alimentation d’entrée, la prise doit
être débranchée du secteur.
12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
•
Battery shall not be exposed to excessive heat such as sunshine,
fire or the like.
Les piles ne doivent pas être exposées à de forte chaleur, tel qu’à
la lumière du soleil, au feu ou autres choses de semblable.
•
•
Caution marking is located at the rear of the apparatus.
Les marquages sont inscrits de derrière de l’appareil.
The marking information is located at the rear of apparatus.
Les précautions d’emploi sont inscrites de derrière de l’appareil.
Customer Support: 1-888-999-4215
GPX - TD930
3
9”Everywhere TV + DVD
Features
•
•
9”widescreen LCD
•
•
•
4:3/16:9 aspect ratio
DVD player supports: DVD, DVD R/
RW, CD, CD-R/RW, JPEG photo discs
NTSC/ATSC tuner for off-air HDTV
Removable stand
Built-in rechargeable battery
Stereo speakers
Remote control for TV and DVD
USB port & SD™/MMC card reader
A/V input
RF coaxial input
Stereo headphone jack
DVD A/V output
Auto scan for TV channels
Electronic Program Guide
LCD resolution: 640 x 220
TV supports 480i, 480p, 720i, 720p,
1080i formats
USB 2.0 high speed
Multi-language OSD (English,
French, and Spanish)
Digital volume control
Sleep timer
DC power input: requires AC/DC
power adapter (included) or 12V
DC car adapter (included)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Included
•
•
•
•
•
•
TD930B
AC/DC power adapter
12V DC car adapter
One set of stereo earbuds
3.5mm to RCA A/V adapter
Remote control (CR2025 battery
included)
•
•
•
•
External TV antenna
Removable stand
Warranty card
User’s guide
4
GPX - TD930
TAble oF ConTenTs
Warnings and Precautions
2
3
Important Safety Instructions
•
•
FCC Warnings
Additional Warnings
9” Everywhere TV + DVD
4
•
•
Features
Included
Introduction
6
8
Setup
•
•
•
•
•
Connecting to an AC Power Outlet
Connecting to a Car Power Outlet
Battery Power
Remote Battery
Attaching the TV Stand
Television Setup
10
•
•
•
Connecting the RF Antenna
Connecting a Cable TV Source
Auto-Scanning for Channels
Watching Television & the TV Menu
11
12
•
•
Watching Television
TV Menu
DVD & DVD Setup Menu
•
•
•
•
Loading a DVD or CD
Playing a DVD or CD
Programming a DVD or CD
DVD Setup Menu
SD/MMC Memory Card Slot & USB Port
14
15
16
•
•
Using an SD or MMC Memory Card
Using a USB Thumb Drive
Audio/Video Input & DVD Output
•
•
Using the DVD Output
Using the A/V Input
Company Information
•
•
•
Green Initiative
International Support
Contact Information
Customer Support: 1-888-999-4215
GPX - TD930
5
Introduction
seTUP
Press to access the
setup menu.
VolUMe +/-
Press to adjust the
volume and navigate
the setup menu.
CHAnnel +/-
Press to adjust the
television channel and
navigate the setup
menu.
POWER/
CHARGE
SOURCE
SCAN DISC/USB/SD
CHANNEL
VOLUME
SETUP
ENTER
sCAn
In TV mode, press to
auto-scan for available
channels.
DIsC/Usb/sD
enTeR
PoWeR/CHARGe
InDICAToR
Lights when powered
on. Blinks when
charging.
In DVD mode, press to
switch between DISC,
USB, and CARD mode.
Press to make selections
on a loaded DVD or the
setup menu.
soURCe
Press to switch between
TV, DVD, and AV IN.
AV IN/
PHONES
DVD OUT
RF InPUT
Use to connect a
television cable or
television antenna.
sTeReo HeADPHone
AV InPUT/DVD
oUTPUT
JACK
Usb PoRT
sD/MMC MeMoRY
CARD sloT
PoWeR
Use to power the TV/
DVD player off or on.
DC PoWeR InPUT
6
GPX - TD930
DIsC/Usb/sD
In DVD mode, press to
switch between DISC, USB,
and CARD modes.
soURCe
Press to switch between TV,
DVD, and AV IN.
POWER DISC/USB/SD
SOURCE
N/P
n/P
PoWeR
Press to turn the TV/DVD
player off or on.
Press to switch between
NTSC, PAL, and AUTO.
osD
nUMbeR KeYPAD
Press to view the on-screen
display, in DVD mode.
sToP
Press to stop a disc during
play, in DVD mode.
OSD
GOTO
GoTo
Press and use the NUMBER
KEYPAD to goto a specified
location on a loaded DVD.
PReV/neXT
Press to skip to the next or
previous chapter or track
on a loaded disc.
PlAY/PAUse
Press to play or pause a
loaded disc.
STOP PLAY/PAUSE
F.ReW/F.FWD
Press to rewind or fast
forward a loaded disc.
RePeAT
Press to repeat a chapter or
entire DVD, or to repeat a
track or entire CD.
F.REW
AUDIO
F.FWD
TITLE
PREV
A-B
NEXT
AUDIo
Press to adjust the audio
language on a playing DVD.
A-b (Repeat)
REPEAT
Press to repeat a specified
section of a playing DVD
or CD.
TITle
Press to access the title
menu on a loaded DVD.
SUBTITLE DVD MENU
ZOOM PROG/ANGLE
SETUP
PRoG/AnGle
DVD MenU
Press to access the DVD
menu on a loaded DVD.
Press to program a DVD
or CD to play chapters or
tracks in a specified order.
Press and hold to switch to
an alternate viewing angle
on supported DVDs.
CC
TV MENU
sUbTITle
Press to adjust the subtitle
language on a playing DVD.
EPG
OK
ZooM
TV MenU
In TV mode, press to access
the TV menu.
Press to zoom in or out on a
playing DVD or JPEG disc.
INFO
EXIT
MUTE
seTUP
CC
Press to turn closed
captioning off, on, or on
during mute.
Press to access the setup
menu.
CHANNEL
VOLUME
DIReCTIon() /oK
Press to navigate menus
and make selections.
ePG
Press to view the electronic
program guide.
MUTe
Press to mute the volume.
InFo
Press to view on-screen
info about the current TV
channel.
CHAnnel
Press to adjust the
television channel.
eXIT
Press to exit the setup
menu.
VolUMe
Press to adjust the volume.
Customer Support: 1-888-999-4215
GPX - TD930
7
Setup
Connecting to an AC Power outlet
Plug the included AC/DC power
adapter into the DC PoWeR InPUT on
the TV/DVD player and an AC power
outlet.
Connecting to a Car Power outlet
Plug the included 12V DC car adapter
into the DC PoWeR InPUT on the TV/
DVD player and a car power outlet.
battery Power
Built-in rechargeable battery.
To charge the built-in battery, simply
connect the TV/DVD player to an AC
power outlet or a DC car power outlet.
Remote battery
Requires 1 CR2025 battery (pre-
installed).
8
GPX - TD930
Attaching the TV stand
Customer Support: 1-888-999-4215
GPX - TD930
9
Television Setup
Connecting the RF Antenna
Auto-scanning for Channels
Connect the included RF antenna to
the RF InPUT on the TV/DVD player.
Before the TV/DVD player can begin
receiving television channels, a scan for
available channels must be run.
1. Connect an RF antenna or cable TV
source to the TV/DVD player.
2. Adjust the PoWeR sWITCH on the
TV/DVD player to the ON position.
3. Press the soURCe button
repeatedly to select TV mode. Press
the enTeR button.
4. Press the sCAn button on TV/DVD
player.
Connecting a Cable TV source
A dialog box will appear on the
display. Select YES if you want to run
the auto scan. Select NO to cancel.
Connect the cable TV source to the RF
InPUT on the TV/DVD player.
5. Press the VolUMe buttons to
select between AIR and CATV.
Select AIR if you have an RF
antenna connected to the TV/DVD
player.
Select CATV if you have a cable TV
source connected to the TV/DVD
player.
6. Press the enTeR button.
7. The TV/DVD player will now
automatically begin scanning for
available channels. This process
can take several minutes to
complete.
To exit the Auto-Scan before it has
completed, press the TV MENU
button on the remote.
10
GPX - TD930
Watching Television & the TV Menu
Watching Television
Before watching television, you must connect an
RF ANTENNA (included) or a cable TV source, and
following the instructions for Auto-Scanning for
Channels.
1. Adjust the PoWeR sWITCH on the TV/DVD
player to the ON position.
2. Press the soURCe button repeatedly to select TV
mode. Press the enTeR button.
3. Press the CHAnnel buttons to change the
channel and watch television.
TV Menu
Display
•
Picture Mode
•
•
•
•
Standard
Dynamic
Soft
Personal
•
•
•
•
•
Contrast
Brightness
Sharpness
Tint
•
•
•
Color
Audio
Antenna
•
•
Balance
Audio Language
•
Antenna
•
•
Air
CATV
•
•
•
English
Spanish
French
•
•
•
•
•
Auto Scan
Show/Hide
Favorite
Channel No.
Channel Label
Time
•
•
•
•
•
OSD Duration
Sleep Timer
Time Zone
Daylight Saving Time
Clock
Customer Support: 1-888-999-4215
GPX - TD930
11
DVD & DVD Setup Menu
loading a DVD or CD
Playing a DVD or CD
Programming a DVD or CD
1. Follow the instructions for Loading
a DVD or CD.
1. Follow the instructions for Loading
a DVD or CD and Playing a DVD or
CD.
2. Adjust the PoWeR sWITCH on the
TV/DVD player to the ON position.
2. Press the PRoG/AnGle button.
3. Press the soURCe button
repeatedly to select DVD mode.
Press the enTeR button.
3. Use the nUMbeR KeYPAD to enter
in titles and chapters or tracks in
the order you want them to play.
4. The loaded DVD or CD will begin
playing automatically.
4. Highlight the on-screen PLAY
button, and press the enTeR
button to begin playing the
programmed disc.
If the loaded DVD or CD doesn’t
begin playing automatically, press
the PLAY/PAUSE button.
To cancel the program, press the
PROGRAM button twice.
12
GPX - TD930
DVD setup Menu
sYsTeM seTUP
•
•
•
•
TV SYSTEM
SCREEN SAVER
TV TYPE
DEFAULT
lAnGUAGe seTUP
•
•
•
•
OSD LANGUAGE
AUDIO LANGUAGE
SUBTITLE LANGUAGE
MENU LANGUAGE
VIDeo seTUP
•
•
•
•
BRIGHTNESS
CONTRAST
HUE
SATURATION
sPeAKeR seTUP
•
DOWNMIx
Customer Support: 1-888-999-4215
GPX - TD930
13
SD/MMC Memory Card Slot & USB Port
Using an sD or MMC Memory Card
1. Insert an SD or MMC memory card
into the sD/MMC MeMoRY CARD
sloT as shown to the left.
2. Adjust the PoWeR sWITCH on the
TV/DVD player to the ON position.
3. Press the soURCe button. Press
the DIReCTIon buttons to select
DVD mode. Press the enTeR
button.
4. Press the DIsC/Usb/sD button to
select CARD mode via navigation
up/down button. Press the enTeR
button.
5. Use the DIReCTIon and enTeR
buttons to select and play media
from the loaded SD or MMC
memory card.
Using a Usb Thumb Drive
1. Insert a USB thumb drive into the
Usb PoRT as shown to the left.
2. Adjust the PoWeR sWITCH on the
TV/DVD player to the ON position.
3. Press the soURCe button. Press
the DIReCTIon buttons to select
DVD mode. Press the enTeR
button.
4. Press the DIsC/Usb/sD button to
select USB mode via navigation
up/down button. Press the enTeR
button.
5. Use the DIReCTIon and enTeR
buttons to select and play media
from the loaded USB thumb drive.
14
GPX - TD930
Audio/Video Input & DVD Output
Using the DVD output
Using the A/V Input
Requires an RCA audio/video cable (not Requires an RCA audio/video cable (not
included) and a 3.5mm to RCA adapter
(included)
1. Connect a 3.5mm to RCA adapter
to the A/V InPUT/DVD oUTPUT.
Connect an RCA audio/video cable
to the adapter and a television.
included) and a 3.5mm to RCA adapter
(included)
1. Connect a 3.5mm to RCA adapter
to the A/V InPUT/DVD oUTPUT.
Connect an RCA audio/video
cable to the adapter and an audio
source.
2. Adjust the PoWeR sWITCH on the
TV/DVD player to the ON position.
2. Adjust the PoWeR sWITCH on the
TV/DVD player to the ON position.
3. Press the soURCe button
repeatedly to select DVD mode.
Press the enTeR button.
3. Press the soURCe button
repeatedly to select AV IN mode.
Press the enTeR button.
4. Adjust the connected television to
the correct input setting.
4. Audio and video played from the
connected source will now play
through the TV/DVD player.
5. DVD’s played on the TV/DVD
player will now be output to the
connected television.
Customer Support: 1-888-999-4215
GPX - TD930
15
Company Information
International support
To download this User’s Guide in
English, Spanish, or French, visit the
Para transferir esta guía de usuario
en inglés, español, o francés, visite la
Pour télécharger ce guide de
l’utilisateur en anglais, espagnol, ou
français, visitez la section de soutien
Contact Information
Phone:
1-888-999-4215
Email:
Parts Email:
Website:
© 2009 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice
|