WPB Series
Wireless Push Button
Application
Statement
WPB wireless Push Button units which can be applied to distant
access control. WPB series is not only convenient for people who
do not work in the same location constantly that are able to unlock
the door from distance, but also a best choice for the locations
which are difficult to set necessity cables.
WPB-900
WPB-025JS
Specifications
Remote Transmitter
1.Power: 12V battery
2.433 KHz transmitting frequency
3.LED indicator: Judge the volume of dry battery at 12V by
LED's brightness.
4.Transmitting distance for the antenna: Max. 50 ~ 60 M
5.Embedded modules: Hopping Code IC
Dimension
6.The Lowest voltage: Not under 6.28V for the battery of
remote transmitter
40
RF Hopping Code Controller
130
1.Power: DC12~24V
2.Output contact: SPDT rated 3A@12V DC dry contact
3.Buzzer indicator: The receiver will alarm from the internal
buzzer as a signal of low-battery which is under DC9.2V.
115
4.LED indicator:
Green LED: Power
Red LED: Receive & input
130
5.Timer setting: 1, 3, 5, 10 seconds
6.The quantity of saving remote transmitter: 6 pcs
62
83
Unit:mm
Remote Transmitter
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of
1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-WPB Ver. C Published on 2008.07.07
|