Gianni Industries Door DG 700 User Manual

DG-700  
Stand alone Access Controller  
Features  
Auxiliary reader  
Allows up to 65000 proximity cards  
Detects the working as machine automatic reply  
Has security preserves the hypothesis/Relieves the function  
The Unit will operate with card only, PIN or card, PIN + card.  
Gate position surveillance input function  
Built-in Proximity Reader  
Anti-Passive tag along warning output function  
Relay and Push to Exit Button function  
Proximity automatic setting function  
Tricolor LED  
May establish 2 Master Cards  
GEMPROX-E  
Specifications  
The auxiliary reader must not be further than 50 meters from  
the DG-700. Also this reader should be nearer than 60  
centimeters, to avoid disturbance. The suggested wire gauge  
is #22~26 AWG. Split of units for DG-700 and auxiliary reader  
in ranging up to 50 M bring out the friendly system device for  
low cost but high security with anti-tampering as well as  
convenience and reliability.  
Input: Request-to-exit  
Relay Electric Current: 3A Max@30VDC; 3A@120VAC  
Operating Voltage: 10~15VDC  
Operating Temperature: -5~60C  
Proximity Cards: 65000  
Keyboard: 12digits Keypad (0~9,*,#)  
Waterproof Design: Waterproof Type Key Pads  
Auxiliary Reader: (WG26, WG34)  
Transmitting Frequency: 125 kHz  
Visual Signals: LED (Red, Blue, Green)  
Relay delay timer: 1~255 seconds  
Interface: Optional with (RS232 or Rs485)  
Read Range: Up to 10 cm  
Warranty  
(Depending on local installation conditions)  
Size: 110(H)x76(W)x23.5(D)mm  
Ambient Humidity: 5%~95%  
The product is warranted against defects in material and  
workmanship while used in normal service for a period of  
1
year from the date of sale to the original customer. The GEM  
policy is one of continual development and improvement;  
therefore GEM reserves the right to change specifications  
without notice.  
GIANNI INDUSTRIES, INC.  
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,  
Tu-Cheng City, Taipei, Taiwan 23678  
The products are manufactured under an ISO  
9001  
&
QC 080000 Certified Quality  
Management Program environment back its  
product quality, performance and commitment  
to customer satisfaction.  
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876  
Website: gianni.tw  
Copyright 2008 Gianni industries, inc. All rights reserved.  
DM-CA-DG-700 Ver. E Published on 2008.06.09  
 

Esoteric DVD Player D 03 User Manual
Euphonix Music Mixer EuCon User Manual
Exmark Lawn Mower OCD01 User Manual
Fisher Paykel Food Warmer OB60SL11DCPX1 User Manual
Fluke Thermostat 51 Series User Manual
FUNAI CRT Television CSF420G User Manual
Fusion Speaker CP SW100 User Manual
Garland Food Warmer Regal Series User Manual
GarrettCom Switch ES42 User Manual
Goodman Mfg Air Conditioner energy efficient air conditition User Manual