10003M Micro Mortice
Water-Proof Electromagnetic Lock
Dimension
32
32
200
170
152
Magnet
Armature
10
Magnet
Armature
Unit: mm
(Power Off)
(On Power)
24
Application
Suitable for sliding door
Unique Anti-Residual design
When there is no power, there will be no holding force, and the
push-off button will pop out immediately, to release the
Electromagnetic Lock and the Armature Plate for no residual
magnetism.
Statement
Sliding
Door
The fail-safe Electromagnetic Lock design with no
mechanical parts but magnetic force to secure and release the
doors, suitable for use in areas which required access
controlled or egress such as sliding gate etc.
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandal-
resistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
Frame
We offers up to 300 pounds holding force with 12V DC power
input (24V DC input voltage available by special order). It is
the best choice for electronic security industry and system
integrators.
Regular Installation
Specifications
Voltage Tolerance: 15%
Current Draw: 300mA@12Vdc (at temperature 20C)
(Further notice for diverse input voltage on special order requirement)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
)current temperature +20C (
Warranty
Holding Force: Up to 300 lbs )136 Kg(
Dimensions:
Magnet:(L) 200, (W) 32, (D) 24 mm
Armature Plate:(L) 152, (W) 32, (D) 10 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 1.5 Kg
The product is warranted against defects in material and
workmanship while used in normal service for a period of
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
5
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-10003M Ver. C Published on 2008.05.12
|