Bluetooth headset
BTHS-002 BLUETOOTH HEADSET
Bluetooth headset
BLUETOOTH HEADSET
USER MANUAL
Introduction
Thank you for choosing our BTHS-002 Bluetooth Headset. This manual will help you install
and use it properly. The product has been quality tested to ensure its reliability and
suitability for your needs. The Headset uses 2.4GHz BluetoothTM Technology to provide
wireless communication with all Bluetooth audio enabled mobile phones and other devices
that support a Bluetooth headset and/or hands free profiles. Its stylish and compact design
combined with a range of practical applications makes this Bluetooth Headset the only
Bluetooth Headset you will ever need.
Bluetooth headset
Package contents
o
o
o
o
Bluetooth Headset
AC Mains Charger
Ear Hook
User Manual
Bluetooth headset
Buttons and controls
Operating instructions
Charging the Bluetooth Headset
1.
Connect the AC charger to the wall socket (the charger supports 100-240 V and is suitable
for usage in Europe, Asia, USA and other countries), then connect the yellow tipped DC
plug into the Bluetooth headset's DC jack (mini charging jack) to commence charging.
During the charging the red indicator on the headset will first light up, then gradually fade
and finally switch off once charging is complete (in approximately 3 hours).
Bluetooth headset
2.
Pairing
Pairing is the creation and exchange of a link key between two Bluetooth devices.
Both devices use the link key for future authentication when exchanging information, in
order to successfully pair the Bluetooth headset with the Bluetooth mobile phone and other
Bluetooth devices such as PCs and notebook computers (for Bluetooth version 1.1). The
Bluetooth headset supports SCO (Synchronous Connection Oriented link) and ACL
(Asynchronous Connection Less) and has a transfer speed of 1 Mbps/sec.
For your convenience we have given some extra functions to the transparent 'Mode' button
on the Bluetooth headset, the table below explains how some of these extra features can
be used simply by pressing the 'Mode' button for a period of time:
Function
Time required
Description
Comments
Switching BTHS-002 on
Approximately 5 seconds
The green indicator will light up
You will hear
a
beeping sound as
every 4 seconds
BTHS-002 turns on
Pairing mode (pairing
code is 1234)
Approximately 10 seconds
Will emit a series of flashing
green and red lights
During pairing mode the green and red
indicator light will flash for approximately 1
minute
Bluetooth headset
Switching the Bluetooth
headset off
Approximately 5 seconds
Will emit a red indicator light
Once the headset is switched off, the
mobile phone will use its own speaker for
the sounds
which will stop once the
headset is off
Volume mute
Redial
Click and hold down the
volume adjustment button
(‘+’&’-‘) for 3-4 seconds
Click and hold down the
volume adjustment button
(’-‘) for 3 seconds
The Bluetooth headset will
mute the call
Redials the last call made from
the mobile phone
The mobile phone has to support the
Bluetooth redial function
Answer a call
End a call
Click the button once as
the call is coming through
Click the button once
during the call
Answers the incoming call
Ends the current call
Reject a call
Click and hold down the
button for 3 seconds
Reject s the incoming call
Re-connect to Bluetooth
device
Click the button once and
then click the button again
after 3 seconds
Will reconnect paired Bluetooth
devices if they have been
disconnected
Green indicator light will flash twice every
one second until the Bluetooth headset is
reconnected to the Bluetooth devices
The mobile phone has to support this
function
Voice control
Click the button once while
the Bluetooth headset is in
standby mode
Voice can be used for dialing,
redialing and answering calls
Follow the instructions in the table above and prepare the Bluetooth headset for pairing
(when the headset is ready it will emit a series of flashing green and red lights). Then turn
Bluetooth headset
the Bluetooth mobile phone on and follow the user manual supplied with the Mobile phone
to commence pairing. The mobile phone will display ‘BT headset' once the Bluetooth
headset has been detected. You will then be prompted to enter the passkey (1234) to
complete the pairing.
a) Volume control
To adjust the volume of the Bluetooth headset, please use the volume control
buttons with the '+' and '-' symbols on the headset. To increase the volume of the
headset please, press the '+' button, to decrease the volume, press the '-' button.
b) Listening to MP3 music
If your computer is Bluetooth enabled or is equipped with a Bluetooth dongle, you
can listen to your MP3 or other audio files on your computer with your Bluetooth
headset after pairing.
c) Wearing the Bluetooth headset
Place the ear hook around your ear (as illustrated below) and insert the ear piece into
you ear. Point the microphone downwards 45˚ for optimum comfort and sound
quality.
Bluetooth headset
Ergonomically designed, the ear hook can be placed on both sides of the headset so
that the product can be used on both the left and the right ear.
Technical specifications
Bluetooth Version
Effective range
Frequency
Compliant with Bluetooth version V1.1
10 meters
2.4GHZ-2.4835GHZ ISM Band
Point to point
Connection
Talk time
3.0 hours
Standby time
TX
100 hours
0dBm (Class II)
Encryption
128 bit encryption
Power consumption
Talking mode 20mA, standby mode 500uA
Bluetooth headset
Battery
Rechargeable Lithium 120mAh
5V DC input/100-240V AC adapter
2 to 3 hours
Charging
Charging
Operating temperature
Storage temperature
Certifications
Passkey
-10 to 55 degrees
-20 to 60 degrees
CE,FCC and BQB
1234
Dimensions
Weight
70*22*26 mm
15g
Accessory
AC charger
Pairing
One to one, can be paired to multiple Bluetooth device but can only be used
with one device at a time
Note
o
o
The Bluetooth headset is not suitable for use in or storage in areas with extreme
heat and humidity.
Please recharge the Bluetooth headset with the provided charger, since
non-approved charger might cause damage to the headset.
Bluetooth headset
Troubleshooting
Problem description
Troubleshooting
Unable to switch the headset on
-Click and hold the ‘Mode’ button for aproximately 5 seconds
-Recharge the headset
No audio after pairing
-Ensure that you are within the distance of 10 meters from the phone
-Remove pairing and start pairing again
-Recharge the mobile phone
Red indicator light is on
Charging indicator does not light up
-Check the physical connection of the charger and the DC jack
-The Bluetooth headset might need a short period of time to recover
from prolonged usage. After a certain time the charging indicator
should light up
Bluetooth headset switches off automatically
Echo is heard
-Switch the Bluetooth headset on
-Recharge for 2 to 3 hours
-Adjust the volume
-Move to a different location
Bluetooth headset
Noise is heard
-Change the distance between the mobile phone and the headset
-Move to a different location
Voice low volume by talking
-Point the microphone towards you
Regulatory Information
European Community Notice
We hereby declare that this Biuetooth Headset is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. Products bearing the
CE marking comply with the R& TTE Directive (1999/5/EC), EMC Directive (89/336/ EEC),
and/or the Low Voltage Directive (73/23/EEC) issued by the commission of the European
Community Compliance with these directives implies conformity to the following European
Norms (in parentheses are the equivalent international standards and regulations):
o
o
o
EN 60950 (IEC60950) Product Safety.
ETS 300 328 Technical requirements for radio equipment.
EN 301 489-17 General EMC requirements for radio equipment.
This product may be used in all EU and EFTA countries.
|