CONTENTS
1
2
3
4
5
6
7
8
9
Introduction
Features
Connecting The HDMI To HDMI Plus Audio Converter
Supported Audio Formats
Audio Processing
Panel Layout
Panel Descriptions
Specifications
Warranty
INTRODUCTION
Congratulations on your purchase of the GefenTV HDMI to HDMI Plus Audio
Converter. Your complete satisfaction is very important to us.
GefenTV
GefenTV is a unique product line catering to the growing needs for innovative
home theater solutions. We specialize in total integration for your home theater,
while also focusing on going above and beyond customer expectations to ensure
you get the most from your hardware. We invite you to explore our distinct
product line and hope you find your solutions. Don’t see what you are looking for
here? Please call us so we can better assist you with your particular needs.
The GefenTV HDMI to HDMI Plus Audio Converter
The GefenTV HDMI to HDMI Audio Converter is a product that takes a Hi Def
source using HDMI and outputs it to an HDTV display using HDMI and, in addi-
tion, up to 8 channels of LPCM audio output through eight RCA connectors. Also,
if a Bitstream audio is desired it outputs this to an Optical digital connector.
Additional features include switchable audio selections between auto mode and
manual mode affording further selection between two-channel audio only, multi-
channel bitstream and 7.1 LPCM audio.
How It Works
Connect a Hi Def source to the GefenTV HDMI to HDMI Audio Converter’s input
with the included HDMI cable. Connect another HDMI cable from the output of
the Converter to an HDTV display. Connect an optical audio cable from the Con-
verter to an external amplifier. Alternatively connect an amplifier to the 8 channel
RCA connectors. Finally connect the 5V DC power supply to the locking connec-
tor and to an electric outlet.
See pages 4 and 5 for further information about the switches on the front panel.
1
FEATURES
Features
•
•
•
Resolution Supported up to 1080p Full HD
Switchable selection between Auto mode and Manual mode
HDMI v1.3 supported features:
Deep Color, Dolby TrueHD, DTS-HD Master Audio, Lip Sync (through the
HDMI connector only)
•
•
•
Bitstream Audio via Optical Toslink and LPCM 7.1 via 8 RCA connectors
Locking power supply
CEC pass-through
Package Includes
(1) HDMI to HDMI Audio (GTV-HDMI-2-HDMIAUD)
(1) 6 ft HDMI cable (M-M)
(1) 5V DC Power Supply
(1) User Manual
2
CONNECTING THE HDMI TO HDMI PLUS AUDIO CONVERTER
How to Connect the GefenTV HDMI to HDMI Plus Audio Converter
1. Connect a Hi Def source to the GefenTV HDMI to HDMI Audio Converter’s
input with the included HDMI cable.
2. Connect another HDMI cable from the output of the Converter to an HDTV
display.
3. Connect an optical audio cable from the Converter to an external amplifier.
Alternatively connect an amplifier to the 8 channel RCA connectors..
4. Finally connect the 5V DC power supply to the locking connector and to
an electric outlet and enjoy crisp and vibrant sound played through the
connected amplifier while watching clear video.
Wiring Diagram for the GefenTV HDMI to HDMI Plus Audio Converter
DIGITAL AUDIO (TOSLINK) CABLE
®
MULTI-CHANNEL RCA CABLE
HDMI CABLE
Hi Def Source
HDMI to HDMI Plus Audio Converter
Audio Receiver
HDTV Display
GTV-HDMI-2-HDMIAUD
3
SUPPORTED AUDIO FORMATS
The Audio Selector Switches
The audio output supports uncompressed LPCM 7.1 and lossless compressed
digital Bitstream (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio).
There are two switches on the front of the unit to the right of the power LED. (See
Panel Layout and Description on pages 6 and 7.) The switch at the left makes
changes to the input audio and the right switch changes from “Auto” to “Manual.”
Unless the right-hand switch is set to “Manual,” the audio selector switch will
not change the audio format from what is coming from the HDMI input. When
this switch is set to “Manual” the audio portion is changed according to what has
been selected.
Determining the Supported Audio Formats
The unit passes audio to its outputs according to the type of signal. See the table
below:
AUDIO FORMAT
HDMI OUT
TOSLINK
8CH-RCA
2 Channel LPCM
5.1 Channel LPCM
7.1 Channel LPCM
Dolby Digital
x
x
x
x
x
x
x
x
x (FR, FL only)
x
x
x
x
DTS
Dolby True HD
DTS-HD-
Master Audio
A Note About Audio Processing in the GefenTV HDMI to HDMI Plus Audio
Converter:
When “2.1” is selected, the audio signal is output to the FR and FL only.
When “5.1 / 7.1” is selected audio is output from the “Multi-CH” output. When
“Bitstream” is selected, the signal is output from the “Optical” output only. The
signal output from TOSLINK should be LPCM 2 ch, AC3 5.1, or DTS 5.1.
The unit supports uncompressed digital LPCM 7.1, 5.1 or 2 channels and
compressed digital Bitstream (Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio) through the HDMI input and the RCA output.
It only supports Hi Res Audio via HDMI. It does not decode Hi Res Audio.
4
AUDIO PROCESSING
Audio Mode Selection:
AUTO MODE:
To use this mode, set the switch on the front panel to the AUTO position. The
converter will output the highest common video resolution and audio capability
according to the EDID data it retrieves from the connected display device.
MANUAL MODE
To use this mode, set the Switch on the front panel to the MANUAL position.
This mode will use a preset EDID that is stored in the converter from the factory.
This pre-programmed standard EDID data structure is compatible with most A/V
display devices. All resolutions and audio formats specified in this EDID will be
passed to the source device, allowing the user to set the video resolution and
audio capabilty.
Manual Audio Mode Switch Settings:
SWITCH POSITIONS
AUDIO FORMAT
AUDIO OUTPUT
2CH
LPCM 2 CH
FR, FL Analog and
HDMI only
LPCM
5.1/7.1
LPCM 5.1
Multi-Channel Analog and
HDMI
LPCM 7.1
Bitstream
LPCM 2CH
Optical Out and HDMI
Dolby AC3 5.1
DTS AC3 5.1
5
PANEL LAYOUT
Front Panel
1
2
3
Back Panel
4
5
6
7
8
6
PANEL DESCRIPTIONS
1
2
Power LED
When the LED is lit it shows that the unit is powered.
2.1 / 5.1 -7.1 / Bit Stream Switch
This enables the 3-way choice between 2.1, 5.1 and 7.1, and bit stream audio
(when in manual mode only) .
3
4
5
6
7
Mode Switch
This switch will toggle between MANUAL and AUTO modes. (See Page 5)
HDMI Input
Connect a Hi Def source device to this input port.
HDMI Output
Connect an HDMI cable to an HDTV display.
TOSLINK Optical Audio Output
Connect a TOSLINK (Optical) audio output here.
RCA 7.1 Surround-Sound Audio Output:
FR - The Front Right audio channel
FL - The Front Left audio channel
SUB - The low frequency Subwoofer audio channel
C - The Center audio channel
SR - The Side Right audio channel
SL - The Side Left audio channel
RR - The Rear Right audio channel
RL - The Rear Left audio channel
8
5V DC Power Input Receptacle
Using the power supply that was shipped with the unit use this to power the unit
7
SPECIFICATIONS
Digital Video Amplifier Bandwidth..............................................................225 MHz
Maximum Resolutions..............................................................1080p, 1920 x 1200
HDMI Input.....................................................................................1 x HDMI 19-pin
HDMI Output..................................................................................1 x HDMI 19-pin
Digital Audio output.............................................................................1 x TOSLINK
Analog Audio Outputs.................................................................................8 x RCA
Power Supply......................................................................................5V I 2.6A DC
Power Consumption.........................................................................13 Watts (max)
Operating Temperature..............................................................................0 - 40 °C
Dimensions..........................................................................10.25”W x1”H x 4.25”D
Shipping Weight...............................................................................................4 lbs
8
WARRANTY
Gefen warrants the equipment it manufactures to be free from defects in material
and workmanship.
If equipment fails because of such defects and Gefen is notified within two (2)
years from the date of shipment, Gefen will, at its option, repair or replace the
equipment, provided that the equipment has not been subjected to mechanical,
electrical, or other abuse or modifications. Equipment that fails under conditions
other than those covered will be repaired at the current price of parts and labor in
effect at the time of repair. Such repairs are warranted for ninety (90) days from
the day of reshipment to the Buyer.
This warranty is in lieu of all other warranties expressed or implied, including
without limitation, any implied warranty or merchantability or fitness for any
particular purpose, all of which are expressly disclaimed.
1. Proof of sale may be required in order to claim warranty.
2. Customers outside the US are responsible for shipping charges to and from
Gefen.
3. Copper cables are limited to a 30 day warranty and cables must be in their
original condition.
The information in this manual has been carefully checked and is believed to
be accurate. However, Gefen assumes no responsibility for any inaccuracies
that may be contained in this manual. In no event will Gefen be liable for
direct, indirect, special, incidental, or consequential damages resulting from
any defect or omission in this manual, even if advised of the possibility of such
damages. The technical information contained herein regarding the features and
specifications is subject to change without notice.
For the latest warranty coverage information, refer to the Warranty and Return
PRODUCT REGISTRATION
Please register your product online by visiting the Register Product page
under the Support section of the Gefen Web site.
9
Rev A2
20600 Nordhoff St., Chatsworth CA 91311
1-800-545-6900 818-772-9100 fax: 818-772-9120
Pb
This product uses UL listed power supplies.
|