GE Universal Remote 45608 User Manual

45608

Home Theater Remote

with Z-Wave^®Lighting Control

Manage your home

entertainment system and

lighting with one remote!

Controls

Audio/Video Devices

and up to

232

Z-Wave Devices

www.easyzwave.com

Introduction

Thank you for purchasing the GE model 45608 Remote Control.

This remote allows you to control up to 12 Audio/Video devices as

well as your Z-Wave Home Lighting Control network.

A Z-Wave home control network can include up to 232 Z-Wave

enabled devices. You can control up to 18 individual Z-Wave

lights, 18 groups of lights and 18 scenes for task or mood lighting.

Groups can include up to 232 Z-Wave devices and each scene

can include up to 32 Z-Wave devices. Lights can be included in

multiple groups. Scenes can include lights from

different groups.

Key Features include:

• Easy to use LCD menu system

• Backlit LCD and keys

• Learning function for audio/video devices not in

the IR code library

• Programmable Key Macros to perform multiple functions with

the press of one button

• Volume Control Lock lets you assign volume & mute functions

to a primary device like your stereo receiver

• Key Mover allows you to copy keys around the remote control

or between A/V devices

• Timed events allow you to turn On/Off a Z-Wave light, group or

scene at a programmed time.

• Control of Z-Wave enabled thermostats for your HVAC system.

• Z-Wave Light, Group & Scene labeling

• Supports Advanced Configuration for Z-Wave devices

For best results, please read all of the instructions before

programming and using this remote. Keep this guide for

future reference.

Audio/Video Key Chart

A. SET – Press & hold to enter setup mode. When in setup mode,

press & release to back up one level in the setup menu or press

& hold to cancel setup.

B. ARROWS – Scroll left or right to highlight desired menu item.

Highlighted menu item in center of display is active.

C. OK – Press & release to select highlighted menu item

D. NUMBER KEYS – Dependent upon Audio/Video device being

controlled. Examples: TV - channel selection; Receiver – input

selection

E. LAST – Selects last channel viewed

F. VOLUME UP & DOWN – Press & hold to adjust volume

G. EXIT / CANCEL – Closes program guide or device menus

H. GUIDE – Activates On-screen program guide for active video

I. Z-WAVE KEY – This key cycles the remote between Z-Wave

and A/V modes. In A/V mode, the green LED beneath the button

flashes to indicate an IR command being transmitted.

J. POWER – Turns current device On/Off. This key may be

programmed with a macro to turn multiple A/V devices on or off

with the touch of one button. A macro overrides individual

device control.

K. DASH – Used along with the number keys to enter digital TV

channels. Example: channel 4-1 or 4-2

L. MUTE – Mutes volume on currently selected device or on

primary device if Volume Control Lock is programmed

M. CHANNEL UP & DOWN – Changes channel on

active A/V device

N. CURSOR (ARROW) KEYS – Left, Right, Up & Down keys for use

in navigating on-screen Guides & Menus

O. SELECT – Press & release to select currently highlighted

on-screen Guide or Menu item

P. MENU – Device specific functions for setup.

Q. INFO – Device specific. Displays information on current video

source or program on TV screen

R. CONTROL KEYS – Device specific controls for the active

A/V device

Batteries

Four “AAA” Alkaline batteries (not included) are required.

Battery Use and Safety

• Use only fresh batteries of the required size and

recommended type.

• Do not mix old and new batteries or different types of batteries.

• If you do not plan to use the remote for an extended period,

remove the batteries. They can leak chemicals that can destroy

electronic parts.

• Dispose of old batteries promptly and properly.

Do not burn or bury them.

To Install Batteries

1. Open the battery compartment cover (located on the back of

the remote).

2. Note the + and - polarity symbols inside the

battery compartment.

3. Insert the batteries, making sure their polarity matches the

symbols in the compartment.

4. Replace the cover.

NOTE: The LCD screen will display BATTERY LOW to indicate that

the batteries need to be replaced. The remote retains all its user

settings except for the day & time while replacing the batteries.

Battery Conservation

If any key is pressed continuously for 30 seconds the remote will

stop transmission to conserve battery life.

Automatic Time-Out

During programming, the remote will exit programming mode if

30 seconds elapses after the last key press.

If a key is pressed longer than 60 seconds while scrolling through

the menu screen, the remote will time-out.

Setup

1. Make sure the remote is in A/V mode. (Press & release the large

Z-Wave key at the top of the remote to cycle between A/V and

Z-Wave modes.)

2. Press and hold the SET key to enter setup mode.

3. Use the ARROW keys to scroll through the menus and the OK

key to select devices or actions.

4. When in setup mode:

• Press and release the SET key to back up one level in

the menu.

• Press and hold the SET key to exit setup mode.

With the remote in A/V mode, press & hold the SET Key

for the following menu options

Advanced

Functions

Z-Wave

Setup

Initial Setup

About

Initial Setup (Audio/Video Devices)

Initial Setup

Change

Device

Code

Add

Device

View

Code

Delete

Device

Replace

Device

Note: Most devices can be added by entering its code or searching

for its code as described in the following two sections. (Be sure the

device you wish to add is turned on before adding or searching for

its code.) You also have the option of using your device’s original

remote to teach commands to this remote. This is covered in the

“Advanced Functions” section under the “Learn Function” heading.

Adding a Device by Entering Its Code

You can add a device by manually entering its manufacturer’s

code. See “Manufacturer’s Codes” on page 45.

1. Press and hold SET until the remote displays INITIAL SETUP.

2. Press OK. The remote displays ADD DEVICE. Press OK.

3. The bottom line of the display lists RECEIVER as the first device

you can add. Press OK or use the ARROW keys to scroll to a

different device to add and then press OK.

4. Enter the four-digit code for your device. The LED blinks once

for each digit entry. It blinks twice after you have entered the

final digit.

NOTE: If an invalid code is entered, the LED emits one long blink,

and the LCD displays INVALID.

5. The selected device turns off if the code was successful. You

can also try pressing additional keys on the remote to test

other functions.

6. If the code you entered functions properly for all keys tested,

Press OK to save the code.

7. If the code you entered does not function properly, Press SET

one time and repeat steps 2-6, trying the next available code

from the manufacturer’s code list.

8. If none of the codes listed for your brand/type of device

function properly, you can try searching for its code (next

section) or use the “Learn Function” as described on page 16.

Adding a Device by Searching for Its Code

1. Press and hold SET until the remote displays INITIAL SETUP.

Press OK.

2. The remote displays ADD DEVICE. Press OK

3. The bottom line of the display lists RECEIVER as the first device

you can add. Press OK or use the ARROW keys to scroll left or

right, select a different device to add and then press OK.

4. The remote displays the device name on the top line and Code

Setup on the next line.

5. Use the ARROW keys to slowly scroll through the

manufacturer’s codes for your device type (i.e., Receiver).

When you have selected the correct code, the device will turn

off. If you accidentally scroll past the correct code, you can use

the other arrow key to go back.

6. Press OK to save the code.

7. If none of the codes work for your device, you are offered the

option of using the “Learn Function” (see the instructions for

learning in the “Advanced Functions” section of this manual).

Press OK to learn or SET to go back one level in the menu.

NOTE: If you cannot find the working code or brand for your

receiver, try the codes for Amplifier, and then Misc. Audio.

Scroll left or right to search for the device when the remote

displays ADD DEVICE.

Changing a Device Code

NOTE: All settings of the current device (Key Mover, Learning,

and all other user-programmed features) will be retained.

1. From INITIAL SETUP press OK. The remote displays ADD

DEVICE. Use the ARROW keys to scroll to CHANGE DEVICE

CODE. Press OK.

2. The remote displays the device name in the center of the 2nd

line. Use the ARROW keys to scroll to the desired device and

press OK.

3. The four digit code can be entered using the number keys or

you can use the ARROW keys to scroll through the codes for

this type of device (see “Adding a Device by Searching for its

Code” above)

4. If you manually entered the code with the number keys or

found the correct code using the search method, press OK

to save it.

5. If using the search method and none of the codes work for

your device, you are offered the option of using the “Learn

Function” (see the instructions for learning in the “Advanced

Functions” section of this manual) Press OK to learn or SET to

go back one level in the menu.

Deleting a Device

6. From INITIAL SETUP press OK. The remote displays ADD

DEVICE. Use the ARROW keys and scroll to DELETE DEVICE.

Press OK.

7. The remote displays the device name and its code (for example,

CABLE BOX 1376). Use the ARROW keys to scroll to the other

devices you have set up.

8. To delete the displayed device, press OK. The remote displays

ARE YOU SURE? IF SO PUSH OK. Press OK.

9. The remote displays the name of the deleted device (for

example, CABLE BOX 1376 Has Been Deleted).

10.Press OK to delete another device or SET to exit.

Viewing a Programmed Device Code

1. From INITIAL SETUP press OK. The remote displays ADD

DEVICE. Use the ARROW keys to scroll to VIEW CODE and

Press OK.

2. The first line of the LCD displays the long device name of the

current device. The second line displays the abbreviated name

of the current device in the middle.

3. The third line displays the 4-digit code number (for example

0010) programmed for the current device.

4. Use the ARROW keys to view codes of other devices you have

set up.

5. After viewing the codes, press OK or SET to exit.

Replacing a Device

This replaces an existing device with a new device in your remote’s

programming. One example could be replacing your cable box

with a satellite receiver.

NOTE: The new device replaces and overwrites all settings of

the current device (Key Mover, Learning, and all other user-

programmed features). The one exception is with macros. The

new device code replaces the old device code within the macro.

1. From INITIAL SETUP press OK. The remote displays ADD DEVICE.

Use the ARROW keys to scroll to REPLACE DEVICE and Press OK.

2. The LCD displays REPLACE WHAT? on line 1 and the current

device type in the middle of line 2. Use the ARROW keys to scroll

to the device to replace.

3. Press OK to select the device type to replace. The LCD displays

WITH WHAT DEVICE? on line 1 and the current device (for

example, RCV) on line 2.

4. Use the ARROW keys to scroll to the new device type you want

to use.

5. When you have selected the replacement device, press OK.

6. The LCD displays the device code and its default ID. For

example, for a cable box the LCD displays CABLE BOX, CODE

SETUP, 1376. Press OK to complete the code setup and store the

new device.

Advanced Functions (Audio/Video Devices)

Advanced Functions

Set

Clock

Set Volume

Control

Key

Mover

Key

Macro

Reset

Remote

Learn

Functions

LCD

Timer

Contrast

To Access the Advanced Functions Menu:

1. With the remote in A/V mode, press and hold the SET key to

enter setup.

2. Use the ARROW keys to scroll to “ADVANCED FUNCTIONS”

and press OK.

Set Clock (Day and Time Setup)

1. From ADVANCED FUNCTIONS, highlight SET CLOCK and

Press OK.

2. The screen will display the day, hour, minute and AM/PM with

the day highlighted.

a. Press the CH + or CH - key to change the day.

b. Use the right ARROW key to highlight the hour, minute and

AM/PM and use the CH keys to adjust.

3. When you’ve completed setting the time press OK; the screen

will display SET CLOCK.

4. Use the ARROW keys to highlight a different menu item or

press SET to exit setup.

NOTE: You will need to reprogram the Day & Time when the

batteries are replaced.

Set Volume Control (Volume Lock)

Volume Lock allows you to control the volume of a primary A/V

device when another A/V device is active on the remote. For ex-

ample, if you use your stereo receiver for the audio while watching

TV or DVDs, you can set the remote to control the volume of your

stereo regardless of which device (TV or DVD) the remote is set

to control. By default, all your devices have independent volume

control. You can perform Individual Volume Unlock on a selected

device to set its volume control for independent operation.

Advanced Functions

Set Volume Control

Lock

Volume

Add Device to

Volume Lock

Remove Device

from Volume Lock

Locking Volume Control to Other Devices

1. From the INITIAL SETUP screen, use the ARROW keys to

highlight ADVANCED FUNCTIONS and Press OK.

2. The remote displays SET CLOCK.

3. Use the ARROW keys to scroll to SET VOLUME CONTROL and

Press OK.

4. The remote displays LOCK VOLUME. Press OK.

5. The remote displays USE < > TO SELECT VOLUME SOURCE

THEN PRESS OK.

6. Use the ARROW keys to select the device to be locked. The

remote displays the name of the device and its code (for

example, LOCK VOLUME TO RECEIVER 1158).

7. Press OK. The display changes to VOLUME CONTROL IS NOW

SET TO RECEIVER.

8. The display automatically changes to LOCK VOLUME after a

few seconds. Press SET to exit.

Adding a Device to Volume Lock

1. From LOCK VOLUME, use the ARROW keys to scroll to ADD

DEVICE TO VOLUME LOCK and Press OK.

2. The remote displays USE < > TO FIND DEVICE TO ADD THEN

PUSH OK. Use the ARROW keys to scroll to the device you want

to lock. The remote now displays the name of the device being

locked and the name of the locking device. For example, LOCK

TV2 TO RECEIVER.

3. Press OK. The remote now displays TV2 HAS BEEN ADDEDTO

VOLUME LOCK.

4. The display automatically changes to VOLUME LOCK after a

few seconds. Press SET to exit.

Removing a Device from Volume Lock

1. From LOCK VOLUME, use the ARROW keys to scroll to REMOVE

DEVICE FROM VOLUME LOCK and Press OK.

2. The remote displays USE < > TO SELECT FIND DEVICE TO

REMOVE THEN PUSH OK. Use the ARROW keys to select the

device to remove. The remote now displays REMOVE FROM

VOLUME LOCK and the abbreviated device name (TV2 for

example).

3. Press OK. The remote’s display changes to TV2 HAS BEEN

REMOVED FROM VOLUME LOCK.

4. The display automatically changes to REMOVE DEVICE FROM

VOLUME LOCK after a few seconds. Press OK to remove

another device from Volume Lock, or press SET to exit.

Key Mover

Key Mover allows you to copy keys around the remote control,

within a device, or from one device to another.

Advanced Functions

Key Mover

Add Key Mover

Delete Key Mover

Copying a Key

1. From ADVANCED FUNCTIONS, use the ARROW keys to scroll

to KEY MOVER. Press OK.

2. The remote displays ADD KEY MOVER. Press OK.

3. The remote displays FIND SOURCE MODE & PUSH OK. On

the bottom line, the remote displays the source device (for

example, SATELLITE). Scroll to the source device for the key

you intend to move. Press OK.

4. The remote displays SELECT SOURCE KEY TO COPY. All keys

except SET, Arrows, and Z-Wave are available for Key Mover.

5. Press the key you wish to copy. The remote displays FIND

DESTINATION MODE & PUSH OK. Scroll to the destination

device for the key you wish to copy. Press OK.

6. The remote displays SELECT DESTINATION KEY & PUSH OK.

Any key except SET, Z-Wave, Arrows and OK is a valid

destination key. Press the destination key and then Press OK.

7. The remote displays Key Mover Saved.

8. The remote displays PUSH OK TO ADD ANOTHER PUSH SET

TO EXIT. Press OK to return to step 3 above or press SET to

exit setup.

Deleting All Copied Keys

This deletes all Key Mover keys for a single mode (device).

1. From the ADD KEY MOVER screen, scroll to DELETE KEY

MOVER. Press OK.

2. The remote displays FIND MODE PUSH OK. On the bottom line,

the device name is displayed (for example, TV).

3. Scroll to the device you wish to delete all copied keys from.

Press OK.

4. The remote displays SELECT KEY TO DELETE OR OK TO

DELETE ALL. Press OK.

5. The remote displays DELETING ALL PUSH OK TO CONFIRM.

Press OK.

6. The remote displays ALL MOVED KEYS DELETED PUSH OK TO

DELETE MORE. Press OK to delete keys for a different device or

SET to exit.

Deleting a Single Copied Key

1. From the ADD KEY MOVER screen, scroll to DELETE KEY

MOVER. Press OK.

2. The remote displays FIND MODE PUSH OK. On the bottom line,

the device name is displayed (for example, TV).

3. Scroll to the device you wish to delete the copied keys from.

Press OK.

4. The remote displays SELECT KEY TO DELETE OR OK TO DELETE

ALL. Press the key to delete.

5. The remote displays KEY DELETED PUSH OK TO DELETE

ANOTHER. Press OK to delete another copied key, or SET

to exit.

Key Macros

Key Macros allow the user to program a series of keystrokes to a

single button. For example, you can program a Key Macro on the

POWER button that turns on and off all of your home entertain-

ment equipment with a single press of the POWER button. The Key

Macro function is not available in Z-Wave mode however; Z-Wave

individual light, group or scene commands can be included in

Audio/Video Key Macros. One example of this would be to change

the TV’s input to DVD, change the stereo receiver’s input to DVD,

turn on the DVD player and set room lights to low; all with one

press of the macro key.

When using a macro, the remote transmits the device commands

in sequence. The green LED (beneath the Z-Wave key) blinks once

for each transmitted command. The remote must be aimed at the

equipment during the entire macro sequence.

NOTE: Macro programming overrides the key’s original function in

all modes. However, you can access the key’s original function by

pressing and releasing SET, then the key where the macro is

assigned. The key then sends its original function, not the macro.

Advanced Functions

Key Macro

Add Key Macro

Delete Macro

Adding a Key Macro:

1. From ADVANCED FUNCTIONS, use the ARROW keys to scroll to

KEY MACRO. Press OK.

2. The remote displays ADD KEY MACRO. Press OK.

3. The remote displays SELECT MACRO KEY. Select any key but

Set, Z-Wave, OK or Arrows (scroll left & scroll right) to store

your macro.

4. The remote displays ENTER THE MACRO SEQUENCE with the

active device highlighted in the bottom line. Use the ARROW

keys to highlight the device for each command.

5. Press the command key that you want to add to the macro.

Note: As soon as you press the first command key, the display

changes to PUSH OK FOR 3 SECONDS TO SAVE. Do not press OK

until you have finished entering all macro commands!

6. To add Z-Wave commands to your macro, press & release the

Z-Wave key to change the remote to Z-wave mode. A small “Z”

will be shown in the upper left corner of the display. Press the

desired light, group or scene mode key, the desired number

key and the On or Off (CH+ / CH-) key to add this command to

the macro. Note: The display does not change to Z-Wave mode

while doing this.

7. Press and release the Z-Wave key to return to A/V mode and

finish programming your macro.

8. When you are finished entering commands for the macro,

press and hold the OK key for three seconds to save your

macro. The remote displays MACRO SAVED and returns to the

KEY MACRO screen.

NOTE: Macros can include up to 30 commands. If you try to

enter more than 30 keys into the macro, the remote displays

MEMORY FULL.

Deleting a Key Macro

1. From ADVANCED FUNCTIONS scroll to KEY MACRO. Press OK.

2. The remote displays ADD KEY MACRO. Scroll to DELETE

MACRO. Press OK.

3. The remote displays SELECT MACRO KEY TO DELETE AND

PUSH OK.

4. Once you have pressed a valid macro key, the remote displays

MACRO DELETED CHOOSE ANOTHER OR OK TO EXIT.

5. Repeat steps 2–4 above until you have finished deleting key

macros. Press SET when finished to return to normal operation.

Learning

Your remote can learn approximately 50 functions from other IR

remote controls if you cannot find your device code. (The actual

number of learnable functions will vary since each IR command

requires a different amount of memory.)

NOTE: Learning can not be done in Z-Wave mode.

NOTE: Make sure your original remote controls have fresh

batteries before programming.

NOTE: You must add the device you want to learn first. If you

cannot find a code that works with your device (for example,

RECEIVER), enter a “dummy” code (any four-digit code) so that

RCV is an available device.

Advanced Functions

Learn Functions

Add Learn Key

Delete Learn Key

1. From ADVANCED FUNCTIONS use the ARROW keys and scroll

to LEARN FUNCTIONS and press OK.

2. The remote displays ADD LEARN KEY. Press OK.

3. The remote displays FIND MODE TO LEARN AND PUSH OK.

The bottom line of the LCD displays the device type (for

example, SATELLITE). Use the ARROW keys to scroll to the

device you want the learned key associated with. Press OK.

4. The remote displays ALIGN REMOTES PUSH OK. Place the two

remotes as shown in the diagram below and press OK.

2”

5. The remote displays SELECT THE KEY TO LEARN TO. All keys

except SET, Z-Wave, OK, or Arrows (scroll left & scroll right)

are available for learning. Press the key you want to teach the

command to.

6. The remote displays WHEN BACKLIGHT TURNS OFF PUSH

TEACHING KEY. The backlight turns off. The display reads

LEARNING NOW! PRESS TEACHING KEY. Press the teaching

key on the original remote control.

7. If Learning is successful, then display and backlight turn back

on. The remote displays SUCCESS! PUSH OK TO LEARN PUSH

SET TO EXIT.

8. Press OK to learn another key or press SET to exit Learning

mode. If you press OK, the remote returns to step 5 above and

is ready to learn another key.

NOTE: If learning fails, the display reads LEARNING FAILED PUSH

OK TO LEARN PUSH SET TO EXIT.

Possible causes for learning failure:

• Your remotes are too close to a UV source (i.e. in sun light,

or close to fluorescent lighting)

• Your remotes are too far apart.

• The teaching remote is an RF (radio frequency) remote.

Teaching remotes must be IR (infrared).

• The remotes’ IR LEDs are not aligned.

• Batteries in one or both remotes may not have a sufficient

charge

Deleting All Learned Keys

To delete all learned keys for a selected device, perform the

steps below:

1. From ADD LEARN KEY use the ARROW keys to scroll to DELETE

LEARN KEY. Press OK.

2. The remote displays SELECT MODE THEN PUSH OK. The

device name is displayed on the bottom line of the display

(for example, TV). Use the ARROW keys to cycle through the

available device types. Press OK.

3. The remote displays SELECT KEY TO DELETE OR PUSH OK TO

DELETE ALL.

4. Press OK. The remote displays DELETING ALL PUSH OK TO

CONFIRM.

5. Press OK. The remote displays ALL LEARNED KEYS DELETED.

PUSH OK TO DELETE MORE.

6. Press SET to exit

Deleting a Single Learned Key

To delete a single learned key, follow steps 1–3 above.

Then perform the following steps:

1. Press the key containing the learned function to be deleted. The

remote displays KEY DELETED PUSH OK TO DELETE ANOTHER.

2. Press SET to exit or OK to delete another learned key.

Advanced Functions

Contrast

LCD Timer

Setting the LCD Display’s Contrast

1. From ADVANCED FUNCTIONS, scroll to CONTRAST. Press OK.

2. The LCD displays CONTRAST SETUP, with 10 blocks to show

the CONTRAST setting. Use the ARROW keys to raise or lower

the setting.

3. Press OK to save.

Adjusting the LCD Timer

You can adjust the LCD timer to control how long your display runs

before it times out and goes blank. The timer can be adjusted in

increments of 10, 20, or 30 seconds.

NOTE: This does not affect backlight settings. The backlight runs

for 10 seconds on your display, and 5 seconds on your keypad.

1. From ADVANCED FUNCTIONS, scroll to LCD TIMER. Press OK.

2. The LCD displays SET TO 20 SECONDS (or the timer of the last

active setting). Use the ARROW keys to adjust the LCD Time-

out period.

3. Press OK to save. The LED blinks twice and the display returns

to LCD TIMER.

Resetting the Remote

Advanced Functions

Reset Remote

To Reset all AV Features,

Push OK

To Reset to Factory

Setting, Push OK

Resetting All Audio/Video Features

You can reset all the remote’s programming, including Key Mover,

Key Macro, Learning, and Volume Lock, except for device codes.

To reset all programming, perform the following steps:

1. From ADVANCED FUNCTIONS, scroll to RESET REMOTE.

Press OK.

2. The remote displays TO RESET ALL AV FEATURES PUSH OK.

Press OK.

3. The remote displays PUSH OK TO CONFIRM OR SET TO

CANCEL. Press OK.

4. The remote displays RESET CONFIRMED.

Restoring Audio/Video Programming to Factory Settings

NOTE: This will remove all devices you have programmed, so use

caution when restoring factory settings.

1. From ADVANCED FUNCTIONS, scroll to RESET REMOTE.

Press OK.

2. When the remote displays TO RESET ALL AV FEATURES PUSH

OK, scroll to RESET TO FACTORY SETTING PUSH OK. Press OK.

3. The remote displays PUSH OK TO CONFIRM OR SET TO

CANCEL. Press OK.

4. The remote displays THIS CLEARS ALL EVEN CODE SETUP ARE

YOU SURE? Press OK.

5. The remote displays RESET CONFIRMED. Your remote is now

reset to its original factory programming.

Z-Wave Overview

Please note: The terms “Device”, “Node” and “Light” all refer to an

individual Z-Wave enabled device in your home control network

and are interchangeable within the context of these instructions.

If this remote is used as the primary controller, you must use it to

create your control network. You can use multiple remote controls

with your Z-Wave lighting control network; however, only one

remote will act as the primary controller. The primary controller

must be used to add or delete devices (lights / nodes) from your

network. All other remotes are considered secondary and can be

used to create groups and/or scenes and control your lighting

however secondary remotes cannot add or delete devices from

your control network.

NOTE: This product can be operated in one Z-Wave network with

Z-Wave certified devices from other manufacturers and/or other

applications. The different listening nodes within the network can

act as repeaters regardless of vendor.

! WARNING

RISK OF FIRE

RISK OF ELECTRICAL SHOCK

RISK OF BURNS

Not for use with Life Support Equipment!

Z-Wave enabled devices should never be used to supply power to or

control the On/Off status of medical and/or life support equipment!

Controlling Appliances:

Exercise extreme caution when using Z-Wave devices to control ap-

pliances. Operation of the Z-Wave device may be in a different room

than the controlled appliance, also an unintentional activation may

occur if the wrong button on the remote is pressed. Z-Wave devices

may automatically be powered on due to timed event programming.

Depending upon the appliance, these unattended or unintentional

operations could possibly result in a hazardous condition. For these

reasons, we recommend the following:

1. Assign Z-Wave controlled appliances to device numbers 10 – 18

on the GE remote. The likelihood of unintentionally turning on the

appliance will be reduced significantly because the “Shift” button

will need to be pressed before pressing device numbers 10-18.

2. Z-Wave devices controlling appliances should be removed from

“All” control setting. Instructions on how to do this are included in

the manual for your GE remote.

3. Do Not include Z-Wave devices in Groups or Scenes if they

control appliances.

4. Do Not use Z-Wave devices to control electric heaters or any

other appliances which may present a hazardous condition due

to unattended or unintentional or automatic power on control

Z-Wave Terminology

Primary Controller: This is the main device used to set up and

control your Z-Wave network. There can only be one primary

controller and it must be used to add or delete devices. A primary

controller can be a portable device like a hand-held remote, a

static controller (permanently installed & never moved), or

a Z-Wave enabled PC.

Secondary Controller: The Z-Wave network supports multiple

controllers so the consumer can use additional Z-Wave remotes

throughout the home. If the secondary controller is the same

brand and model as the primary, it will have all of the same capa-

bilities as the primary with one exception; the secondary controller

can not be used to add or delete devices.

Home Control Network: Your controllers and every Z-Wave device

you have added with the primary controller are linked together

into a wireless network. Each device in your network has a unique

address assigned to it and cannot be activated by your neighbor’s

Z-Wave controller.

Light/Node/Device: Node is the technical term used to describe a

Z-Wave device in your home control network. Please note that the

terms “Node”, “Device” and “Light” all refer to an individual Z-Wave

enabled device and are interchangeable.

Group: Multiple Z-Wave devices can be turned ON or OFF with a

single command when they are placed into a Group. One example

would be grouping your porch light, exterior garage lights and

patio lights together so that they could all be turned ON if you hear

a strange sound in the middle of the night.

Scene: A scene lets you establish preset brightness levels for

multiple Z-Wave controlled lights and then control them with one

command. This is ideal for mood or task lighting. Scene 1 could be

the family room lights set to dim for watching TV. Scene 2 could

have the same lights set to a different brightness level for other

activities like reading or entertaining.

Event: An event is something you want to happen at a specific

time and day. This could be everyday, a specific day of the week,

Monday through Friday, Saturday & Sunday only, or a one time oc-

currence. Events can be set up to control an individual device,

a group or a scene.

Wireless Range

This device complies with the Z-Wave standard of open-air, line

of sight transmission distances of 65 feet. Actual performance

in a home depends on the number of walls between the remote

controller and the destination device, the type of construction and

the number of Z-Wave enabled devices installed in the control

network. Every Z-Wave enabled device acts as a signal repeater

and multiple devices result in more possible transmission routes

which help eliminate “RF dead-spots”.

Things to consider regarding RF range:

• Each wall or obstacle (i.e.: refrigerator, big screen TV, etc.)

between the remote and the destination device will reduce the

maximum range by approximately 25-30%.

• Brick, tile or concrete walls block more of the RF signal than

walls made of wooden studs and plasterboard (drywall).

• Wall mounted Z-Wave devices installed in metal junction boxes

will suffer a significant loss of range (approximately 20%) since

the metal box blocks a large part of the RF signal.

Effects of Home Construction on Wireless Range Between

Z-Wave Enabled Devices

Note: The distances shown in the table below are typical

examples. Actual performance in your home will vary.

Type of Construction

From the Remote

(or repeating

Z-Wave module)

to destination

device:

Wood Frame w/Drywall Brick, Tile or Concrete

Plastic

Metal

Plastic

J-Boxes*

Metal

J-Boxes

J-Boxes*

J-Boxes

Number of Walls

or Obstacles

0** 100’

80’

56’

39’

27’

100’

60’

80’

48’

29’

17’

70’

49’

34’

36’

21’

* For Plug-in Modules or In-Wall Devices Installed in Plastic Junction Boxes

** Line of Sight / no obstructions

Please Note: Z-Wave home control networks are designed to work

properly alongside 802.11 wireless computer networks, Bluetooth

and other 2.4GHz or 5.8GHz devices. Some baby cams, wireless

video devices and older cordless phones using the 900MHz fre-

quency range may cause interference and limit Z-Wave function-

ality. Many 900MHz products have a switch to select channel “A”

or “B”. You may find that one of these channels will cause less

interference than the other.

Notes on Network Management

1. “Add a node, group or scene” can also be referred to as “include

a node, group or scene.” “Remove a node, group or scene” can

also be referred to as “Exclude a node, group or scene.”

2. If the screen displays FAIL during the setup or programming

process, you have pressed an invalid key or the desired action

has not been successfully completed. Please try again.

Important Notes on New Remotes

New remotes are, by default, primary remotes (controllers).

This means that a new remote can:

• Create a new control network.

• Be added to an existing network as a secondary controller.

• Be added to an existing network as the new primary

controller. In this case, the original remote is converted into

a secondary controller.

• Delete nodes from an existing control network and reset

them to their factory defaults. If devices in an existing

network are deleted by a primary controller that is not part

of that network, the entire network may suffer reliability

and control problems.

- The original remote will not be able to control those

devices even though they are still listed in its device and

routing tables.

- Devices that normally receive routed (relayed) command

signals through the deleted devices may fail to operate

as expected.

- A deleted device can be added back into the network

with that network’s primary controller, however, the

network’s controllers will indicated “failure” when

attempting to use Group, Scene or All commands

that include the deleted devices. In this situation, the

only solution is to reset (delete) every device, reset the

controllers and recreate the network.

Z-Wave Key Chart

A. SET – Press & hold to enter setup mode. When in setup mode,

press & release to back up one level in the setup menu or press

& hold to cancel setup.

B. SHIFT – For use in Z-Wave setup & operation modes. Press

& release to shift number key from devices 1 – 9 to 10 – 18.

C. ARROWS – scroll left or right to highlight desired menu item.

D. OK – Press & release to select highlighted menu item

E. BRT & DIM (Volume Up & Down) – Light mode only - Use AR-

ROW KEYS or number keys to select desired light (displayed in LCD)

and then press & hold to adjust brightness of Z-Wave lights (Must

be dimmable)

F. CANCEL (Exit) – Press & release to back up one menu level in Z-

Wave programming mode or exit the Z-Wave “waiting” mode

MODE KEYS:

G. LIGHT – Use to program and/or control individual lights

H. GROUP – Use to program and/or turn multiple lights On or Off

at the same time

I. SCENE – Use to program and/or control multiple lights with

preset brightness levels.

J. ALL – Use to turn On/Off all Z-Wave lighting at the same time.

Press & release “All” key, and then the On or Off key (Channel Up

or Down)

K. Z-WAVE KEY – This key cycles the remote between Z-Wave and

A/V modes. In Z-Wave mode, the green LED beneath the button

blinks to indicate the following:

1. Twice to indicate entering programming mode or a

programming success.

2. Once (long blink) to indicate an invalid action during

programming or a programming failure.

L. NUMBER KEYS – Use to select individual lights, groups or

scenes. Press & release SHIFT to change number keys from

devices 1 – 9 to 10 – 18.

M. ON & OFF (Channel Up & Down) – Select the desired mode and

use ARROW KEYS or number keys to select desired light, group or

scene (displayed in LCD) and then press & release to turn On or Off.

Also used for All-On and All-Off functions in All mode

N. Thermostat symbol (Info Key) – Press & release to select

Z-Wave thermostat

Z-Wave Setup

With the remote in Z-Wave mode, press & hold the

SET Key for the following menu options:

Z-Wave

About

Z-Wave Setup

Light

Setup

Group

Setup

Scene

Setup

All

Setup

Thermostat

Transfer

Network

Events

Advanced

Config.

Devices / Lights / Nodes

Light Setup

Add

Remove

Delete

Label

To Network

To A Key

Adding a Device (Node / Light) to the Network

In order to control the lights, they must be Z-Wave enabled and

you must first add them to your home network. There are two

ways to do this.

1. Add lights to your remote so that they can be controlled

individually using the number keys (maximum of 18). Adding

a device to your remote also adds it to your network. If the

device number you are trying to add is already associated with

another device, the previous information is lost.

2. Add devices to your home network (maximum of 232) without

assigning them to a specific number key. These devices

can only be controlled through the GROUP, SCENE or ALL

commands.

Add a device without assigning it to a specific number key

1. Enter Z-Wave setup mode. LIGHT SETUP is the default option.

2. Press OK; the screen will display ADD

3. Press OK; the screen will display TO NETWORK

4. Press OK; the letter “W” will be displayed in the upper left hand

corner and the green Z-Wave LED will begin blinking indicating

the remote is waiting to add your device.

5. Press the button on the device so that it communicates with

the remote.

6. When the screen displays SUCCESSFUL the device has been

added to your network.

7. The device can now be added to Groups and/or Scenes.

Add a device and assign it to a specific number key

1. Enter Z-Wave setup mode and highlight LIGHT SETUP

2. Press OK; the screen will display ADD

3. Press OK; the screen will display TO NETWORK

4. Press the left arrow key once; the screen will display TO A KEY

5. Press OK; the screen will display SEL DIGIT

6. Press a digit (1-9) for the device location you wish to add.

Press SET (SHIFT) and the digit (1-9) if you are adding devices 10

through 18. The screen will display the number you’ve chosen.

7. Press OK; the letter “W” will be displayed in the upper left hand

corner and the Z-Wave light will begin blinking indicating the

remote is waiting to connect to your device.

8. Press the button on the device so that it communicates with

the remote.

9. When the screen displays SUCCESSFUL the device has been

added to the selected key.

10. The device can now be added to Groups and/or Scenes.

Controlling an Individual Device (Node / Light)

You can control a light to turn on or off, or change its brightness

level. The operation of a specific device varies by product. Refer to

the manual for that device to learn its specific operation.

• In the Z-WAVE mode press the LIGHT key to put the remote

into “Individual Light Control” mode. Use the NUMBER or

ARROW keys to select the light you want to control. (Press and

release SHIFT to control lights 10 through 18.)

Turning a Light On or Off

• To turn a light on, press and release the CH + key for less than

one second. The screen will display ON above the selected

Light/Node.

• To turn a light off, press and release the CH - key for less than

one second. The screen will display OFF above the selected

Light/Node.

Setting a Light’s Brightness Level

• To brighten a light, press and hold the VOL + key for more than

one second. The screen will display BRIGHT UP above the

selected Light/Node. The light will continue to grow brighter

until the key is released.

• To dim a light, press and hold the VOL - key for more than one

second. The screen will display BRIGHT DOWN above the

selected Light/Node. The light will continue to grow dimmer

until the key is released.

Removing an Individual Device (Node / Light) From Your Remote

This only removes individual number key control. The device is still

part of your home control network and can be controlled through

the GROUP, SCENE and ALL commands.

1. Enter Z-Wave setup mode and highlight LIGHT SETUP

2. Press OK; the screen will display ADD

3. Press the right arrow key once; the screen will display REMOVE

4. Press OK; the screen will display SEL DIGIT

5. Press a digit (1-9) for the device location you wish to remove.

Press SHIFT and the digit (1-9) if you are removing devices 10

through 18. The screen will display the number you’ve chosen.

6. Press OK. When the screen displays SUCCESSFUL, the device

has been removed from the number key.

Deleting a Device (Node / Light) From Your Network

This completely removes the device from your home control

network and resets the device to its factory default settings.

1. Enter Z-Wave setup mode and highlight LIGHT SETUP

2. Press OK; the screen will display ADD

3. Press the right arrow key twice; the screen will display DELETE

4. Press OK; the letter “W” will be displayed in the upper left hand

corner and the Z-Wave light will begin blinking indicating the

remote is waiting to delete your device.

5. Press the button on the device so that it communicates with

the remote.

6. When the screen displays SUCCESSFUL, the device has been

deleted from your network and reset to its factory defaults.

Groups

You can create a collection of devices (lights / nodes) that you can

turn On or Off as a group. You can create up to a maximum of 18

groups. A group can contain up to 232 devices.

Group Setup

Add

Remove

Delete

Label

Create a Group or Add a Device to a Group

1. Enter Z-Wave setup mode and highlight GROUP SETUP

2. Press OK; the screen will display ADD

3. Press OK; the screen will display SEL DIGIT

4. Press a digit (1-9) for the group you wish to add the device to.

Press SHIFT and the digit (1-9) if you are adding a device to

groups 10 through 18. The screen will display the group

you’ve chosen.

5. Press OK; the letter “W” will be displayed in the upper left hand

corner and the Z-Wave light will begin blinking indicating the

remote is waiting to connect to your device.

6. Press the button on the device so that it communicates with

the remote.

7. When the screen displays SUCCESSFUL you have successfully

added the Node/Light to a group.

8. To add additional Node/Lights to your group repeat steps 1

thru 10.

To control a Group:

1. When in Z-Wave mode press the GROUP key once to put the

remote into “GROUP Control” mode.

2. Press the digit key for the group you wish to control (1-9).

Press SHIFT and the digit (1-9) if you are controlling groups 10

through 18. The screen will display the selected Group.

• To turn a GROUP on, press and release the CH + key for

less than one second. The screen will display ON above the

selected GROUP.

• To turn a GROUP off, press and release the CH - key for less

than one second. The screen will display OFF above the

selected GROUP.

Removing a Device (Node / Light) From a Group:

This only removes the device from a specific group. The device is

still part of your home control network and the group still exists (if

there were more than one device in it to start).

1. Enter Z-Wave setup mode and highlight GROUP SETUP

2. Press OK; the screen will display ADD

3. Press the right arrow key once; the screen will display REMOVE

4. Press OK; the screen will display SEL DIGIT

5. Press a digit (1-9) for the group you wish to remove the device

from. Press SHIFT and the digit (1-9) if you are removing a

device from groups 10 through 18. The screen will display the

group you’ve chosen.

6. Press OK; the letter “W” will be displayed in the upper left hand

corner and the Z-Wave light will begin blinking indicating the

remote is waiting to remove your device.

7. Press the button on the device so it communicates with

the remote.

8. When the screen displays SUCCESSFUL you have successfully

removed the Node/Light from the group.

Deleting a Group

This only deletes the specific group. All of the devices are still part

of your home control network.

1. Enter Z-Wave setup mode and highlight GROUP SETUP

2. Press OK; the screen will display ADD

3. Press the right arrow key twice; the screen will display DELETE

4. Press OK; the screen will display SEL DIGIT

5. Press a digit (1-9) for the group you wish to remove the device

from. Press SHIFT and the digit (1-9) if you are removing a

device from groups 10 through 18. The screen will display the

group you’ve chosen.

6. Press OK; the screen will display SUCCESSFUL to indicate the

group has been deleted.

Scenes

A scene is a single device or group of devices that can be preset to

turn on to a previously specified setting (for example, brightness

level). Scenes are ideal for task or mood lighting. You can set up

a maximum of 18 scenes, containing up to 32 devices per scene.

Scenes can include lights from different groups.

Scene Setup

Add

Remove

Delete

Label

Adding a Device (Node / Light) to a Scene

1. Enter Z-Wave setup mode and highlight SCENE SETUP

2. Press OK; the screen will display ADD

3. Press OK; the screen will display SEL DIGIT

4. Press a digit (1-9) for the scene you wish to add the device to.

Press SHIFT and the digit (1-9) if you are adding devices to

scenes 10 through 18. The screen will display the scene

you’ve chosen.

5. Press OK; the letter “W” will be displayed in the upper left hand

corner and the Z-Wave light will begin blinking indicating the

remote is waiting to connect to your device.

6. Press and release the button on the device so it communicates

with the remote.

7. When the screen displays SUCCESSFUL you have successfully

added the Node/Light to a scene. Immediately following this

the screen will display TO ADJUST LEVEL PUSH OK TO SAVE.

8. Within 30 seconds press and hold the button on the device to

adjust the brightness level. Release the button at your desired

setting, then press OK on the remote.

9. When the screen displays SUCCESSFUL you have successfully

added the Node/Light to a scene at your desired setting.

10.To add additional Node/Lights to your scene repeat steps 1

thru 12.

To control a scene:

1. While in the Z-Wave mode press SCENE once to put the remote

in SCENE mode.

2. Press the digit key for the scene you wish to control (1-9).

Press SHIFT and the digit (1-9) if you are controlling scenes 10

through 18. The screen will display the scene you’ve chosen.

• To turn a SCENE on, press and release the CH + key for less

than one second. The screen will display ON above the

selected SCENE.

• To turn a SCENE off, press and release the CH - key for less

than one second. The screen will display OFF above the

selected SCENE.

Removing a Device (Node / Light) From a Scene

This only removes the device from a specific scene. The device is

still part of your home control network and the scene still exists (if

there is more than one device in the scene).

1. Enter Z-Wave setup mode and highlight

SCENE SETUP

2. Press OK; the screen will display ADD

3. Press the right arrow key once; the screen will display REMOVE.

4. Press OK; the screen will display SEL DIGIT

5. Press a digit (1-9) for the scene you wish to add the device to.

Press SHIFT and the digit (1-9) if you are adding devices to

scenes 10 through 18. The screen will display the scene you’ve

chosen.

6. Press OK; the letter “W” will be displayed in the upper left hand

corner and the Z-Wave light will begin blinking indicating the

remote is waiting to remove your device.

7. Press the button on the device so it communicates with the

remote.

8. When the screen displays SUCCESSFUL you have successfully

removed the Node/Light from the scene.

Deleting a Scene

This only deletes the specific scene. All of the devices are still part

of your home control network.

1. Enter Z-Wave setup mode and highlight SCENE SETUP

2. Press OK; the screen will display ADD

3. Press the right arrow key twice; the screen will display DELETE.

4. Press OK; the screen will display SEL DIGIT

5. Press a digit (1-9) for the scene you wish to add the device to.

Press SHIFT and the digit (1-9) if you are adding devices to

scenes 10 through 18. The screen will display the scene you’ve

chosen.

6. Press OK; the screen will display SUCCESSFUL to indicate that

the scene has been deleted.

Labels

Individual LIGHTS, GROUPS and SCENES can all be labeled to help

identify their function or location in your home. The process is the

same for all three.

1. Enter Z-Wave setup mode and highlight LIGHT SETUP, GROUP

SETUP or SCENE SETUP. Press OK.

2. Use the ARROW keys to scroll to LABEL.

3. Press OK; the screen will display SEL DIGIT

4. Press a digit (1-9) for the LIGHT, GROUP or SCENE you would

like to label. Press SHIFT and the digit (1-9) if you are labeling for

keys 10 through 18. The screen will display the key number in

the mode you would like to label.

5. Press OK; the screen will display the current name of the

device in the mode you’ve selected with the first letter or digit

highlighted.

a. Use the right or left ARROW KEYS to scroll right or left.

b. Press the CH + key to move the letter or number forwards.

c. Press the CH - key to move the letter or number backwards.

6. When you’ve completed labeling the device press OK; the

screen will display SUCCESSFUL.

All-On and All-Off Control

The factory default setting for GE Z-Wave lighting control devices

is to be included in All-On and All-Off control. Other brands of Z-

Wave enabled lighting control devices may have to be manually

added to ALL control. If desired, specific devices can also be setup

to ignore the All-On and All-Off commands.

Turn all devices on or off

1. While in the Z-Wave mode press ALL once. The screen will

display ALL

2. Press the CH + key to turn all of the lights on. The display will

briefly display ON below ALL.

3. Press the CH - key to turn all of the lights off. The display will

briefly display OFF below ALL.

4. If the screen displays FAIL not all of the lights completely

received and responded to the remotes command. In this event

repeat steps 1 thru 3.

All Setup

Include All

On/Off

Exclude All

On Only

Exclude All

Off Only

Exclude All

On/Off

Adding or Excluding a Device To / From All Control

Menu options under ALL SETUP include EXCLUDE ALL ON OFF,

INCLUDE ALL ON OFF, EXCLUDE ALL ON ONLY and EXCLUDE ALL

OFF ONLY.

1. Enter Z-Wave setup mode and highlight ALL SETUP.

2. Press OK; the screen will display EXCLUDE ALL/ON OFF

3. Use the ARROW keys to scroll to the desired action.

4. Press OK; the letter “W” will be displayed in the upper left hand

corner and the Z-Wave light will begin blinking indicating the

remote is waiting to communicate with your device.

5. Press the button on the device so that it communicates with

the remote.

6. When the screen displays SUCCESSFUL you have successfully

completed the desired action.

Events

The GE 45608 LCD remote allows you to program automated

events such as turning on or off lights at a predetermined time

and day. An event can control an individual Light, a Group or a

Scene.

Note: Prior to programming an Event, you must set the day

and time.

Events

Add

Delete

All

Event View

Adding an Event

1. Enter Z-Wave setup mode and highlight EVENTS.

2. Press OK; the screen will display ADD

3. Press OK; the screen will display EVERYDAY

4. From this screen you can use the right and left arrow keys to

select the day or days you would like the event to occur. The

selections are;

a. EVERYDAY(The event will occur everyday)

b. MON – FRI (The event will occur Monday thru Friday)

c. SAT/SUN (The event will only occur on Saturday and Sunday)

d. ONETIME (The event will only occur onetime)

e. SUNDAY (The event will only occur on Sundays)

f. MONDAY (The event will only occur on Mondays)

g. TUESDAY (The event will only occur on Tuesdays)

h. WEDNESDAY (The event will only occur on Wednesdays)

i. THURSDAY (The event will only occur on Thursdays)

j. FRIDAY (The event will only occur on Fridays)

k. SATURDAY (The event will only occur on Saturdays)

Note: All events with the exception of “ONE TIME” will repeat on a

weekly basis until deactivated or deleted.

5. After selecting the occurrence of the event press OK; the

screen will display SEL DIGIT

6. Press a digit (1-9) for the key you wish to add the event to. Press

SHIFT and the digit (1-9) if you are adding events to keys 10

through 18. The screen will display the event you’ve chosen.

(Event 1 for example)

7. Press OK; the screen shows NORMAL. Press OK for exact

timing or use the ARROW keys to change to RANDOM. The

random option activates the event up to 15 minutes before or

after the programmed time. Note: The random option is not

available for one time events.

8. Press OK; the screen will display EVENT TYPE - LIGHT 1

9. Use the ARROW keys to scroll between event types. As you

scroll the screen will display;

a. LIGHT 1 (Controls the LIGHT set to key #1)

b. GROUP 1 (Controls the GROUP set to key #1)

c. SCENE 1 (Controls the SCENE set to key #1)

10. When you’ve scrolled to the event type you would like to

control, use the ARROW keys to select what number LIGHT,

GROUP or SCENE you would like to control.

11. After choosing the event type and number press OK; the

screen will display the hour, minute and AM or PM with the hour

highlighted above the words ON TIME.

12. To set the ON TIME of your event;

a. Use the right or left ARROW keys to scroll right or left.

b. Press the CH + key to move hour, minute, AM or PM forwards.

c. Press the CH - key to move the hour, minute, AM or PM

backwards.

13. When you’ve set the ON TIME, press OK; the screen will display

the hour, minute and AM or PM with the hour highlighted above

the words OFF TIME.

14.To set the OFF TIME of your event;

a. Use the right or left ARROW keys to scroll right or left.

b. Press the CH + key to move hour, minute, AM or PM forwards.

c. Press the CH - key to move the hour, minute, AM or PM

backwards.

15.When you’ve set the OFF TIME, press OK; the screen will

display SUCCESSFUL indicating you successfully programmed

your event.

Enabling or Disabling an Individual Event:

1. Enter Z-Wave setup mode and highlight EVENTS.

2. Press OK; the screen will display ADD.

3. Use the ARROW keys to scroll to EVENT VIEW. Press OK.

4. Use the ARROW keys to select the desired event. Press OK.

5. Use the ARROW keys to select ENABLED or DISABLED. Press OK.

Enabling or Disabling All Events:

1. Enter Z-Wave setup mode and highlight EVENTS.

2. Press OK; the screen will display ADD.

3. Use the ARROW keys to scroll to ALL. Press OK.

4. Use the ARROW keys to select ALL ON or ALL OFF. Press OK.

Deleting an Event

1. Enter Z-Wave setup mode and highlight EVENTS.

2. Press OK; the screen will display ADD.

3. Use the ARROW keys to scroll to DELETE.

4. Press OK; the screen will display SEL DIGIT

5. Use the number keys to select the event to be deleted. Press OK.

6. The screen will display SUCCESSFUL to indicate that the event

has been deleted.

Thermostats

The GE 45608 LCD remote allows you to program and control

multiple Z-Wave enabled Thermostats.

Thermostat

Add

Delete

Adding a Thermostat:

1. Enter Z-Wave setup mode and highlight THERMOSTAT

2. Press OK and the screen will display ADD

3. Press OK and the screen will display SETUP WAITING

4. Press the button on the thermostat’s Z-Wave interface

5. When the screen displays SUCCESS, you have successfully

added the THERMOSTAT to your remote control.

Controlling a Thermostat:

The features and functions that can be controlled vary by

manufacturer and you will need to review the user manual that

was provided to determine capabilities of your THERMOSTAT.

If supported by the thermostat, the 45608 LCD remote allows you

to check room temperature, adjust HVAC system modes (Heat,

Cool, Auto, Fan, etc.) and adjust temperature settings (SETPOINT).

Note: Your HVAC system may have to be set to “HEAT or

“COOL’” mode in order to remotely check and/or adjust the room

temperature. “AUTO” mode may not provide this function.

Deleting a Thermostat:

1. Enter Z-Wave setup mode and highlight THERMOSTAT

2. Press OK and the screen will display ADD

3. Use either ARROW keys to scroll until the screen displays

DELETE

4. Press OK and the screen will display SETUP WAITING

5. Press the button on the thermostat’s Z-Wave interface

6. When the screen displays SUCCESSFUL, you have successfully

deleted the thermostat.

Advanced Configuration

Adv. Config.

Parameter

Some Z-Wave devices provide advanced

capabilities available only through the use of a

remote control like the GE 45608. One example is

the GE 45606 in-wall dimmer which allows the

end user to change whether the LED is illuminated

when the light is On or when the light is Off.

Please refer to the instructions of your Z-Wave

device for available options and specific

instructions on changing its advanced

configuration.

Number of

Bytes

Configuration

Value

To Change Advanced Configuration Settings:

1. Enter Z-Wave setup mode and highlight ADV. CONFIG.

2. Press OK and screen will display PARAMETER 0

3. Use either ARROW key to scroll until the display reads the

proper parameter number (1 - 255) as indicated in the Z-Wave

device’s instructions

4. Press OK and the screen will read NUMBER OF BYTES

5. Use either ARROW key to scroll until the display reads the

proper number of bytes (1, 2 or 4) as indicated in the Z-Wave

device’s instructions

6. Press OK and the screen will display read CONFIGURATION

VALUE 1 = 0

7. Use either ARROW key to scroll until the display reads the

proper value (0 - 255) as indicated in the Z-Wave device’s

instructions

8. Press OK

9. Press the button on the device.

10.The screen will display SUCCESSFUL

Copying information to or from the remote control:

Create Secondary, Controller Swap and Receive are all methods

used in the process of replication.

Create Secondary Controller

A Primary controller must be used to add or delete devices from

your network; however, secondary controllers can be created to

enhance convenience (remotes in multiple locations like the

kitchen, master bedroom and family room) and functionality

(control of more than 18 individual lights, 18 groups or 18 scenes).

There are two ways to create a secondary controller. The first

way is to copy all network and device information while the

second is to copy just the network information. If the two remotes

are identical (two of the GE 45608s for example), the first method

creates an exact duplicate of all Z-Wave information including

groups, scenes, labels, etc. The second method copies only the

network and does not duplicate the groups, scenes, labels, etc.

Transfer

Create

Secondary

Controller

Swap

Receive

To send device and network information to a

secondary remote:

1. Enter Z-Wave setup mode and highlight TRANSFER

2. Press OK; the screen will display CREATE SECONDARY

3. Press OK; the screen will display ALL

4. Place the Secondary remote in RECEIVE mode. See the

following section on “Receiving Network and Device

Information” if the Secondary remote is a GE 45608 remote.

If the Secondary remote is a different GE model or different

brand, please refer to its instructions for details.

5. After the Secondary remote is in the RECEIVE mode press

OK on the Primary remote; the screen will display SENDING.

The Primary remote then transmits the network and device

information to the new Secondary remote.

6. Both remotes should indicate a successful completion of the

copying process.

a. The 45608’s screen will display SUCCESSFUL.

b. Other GE models or other brands will indicate success in

various ways, depending on the remote’s capabilities. Please

refer to its instructions for details.

7. Change individual devices, groups, scenes, etc. on the new

secondary remote as needed.

To send only network information to a secondary remote:

1. Enter Z-Wave setup mode and highlight TRANSFER

2. Press OK; the screen will display CREATE SECONDARY

3. Press OK; the screen will display ALL

4. Press the right arrow key once; the screen will display

NETWORK ONLY.

5. Place the Secondary remote in RECEIVE mode. See the

following section on “Receiving Network and Device

Information” if the Secondary remote is a GE 45608 remote.

If the Secondary remote is a different GE model or different

brand, please refer to its instructions for details.

6. After the Secondary remote is in the RECEIVE mode press

OK on the Primary remote; the screen will display SENDING.

The Primary remote then transmits the network and device

information to the new Secondary remote.

7. Both remotes should indicate a successful completion of the

copying process.

a. The 45608’s screen will display SUCCESSFUL.

b. Other GE models or other brands will indicate success in

various ways, depending on the remote’s capabilities.

Please refer to its instructions for details.

8. Change individual devices, groups, scenes, etc. on the new

secondary remote as needed.

Controller Swap (Transfer Primary)

You can transfer all of your remote’s information to another

remote, so it becomes the new Primary remote and the original

remote becomes a secondary controller. You can do this in two

ways: either transferring all information, or just transferring

network information.

Transferring all Device, Network and Primary

status to a new remote:

1. Enter Z-Wave setup mode and highlight TRANSFER

2. Press OK; the screen will display CREATE SECONDARY

3. Press the right ARROW key once; the screen will display

CONTROLLER SWAP.

4. Press OK; the screen will display ALL

5. Place the Secondary remote in RECEIVE mode. See the

following section on “Receiving Network and Device

Information” if the Secondary remote is a GE 45608 remote.

If the Secondary remote is a different GE model or different

brand, please refer to its instructions for details.

6. After the Secondary remote is in the RECEIVE mode press

OK on the Primary remote; the screen will display SENDING.

The Primary remote then transmits the network and device

information to the new Secondary remote.

7. Both remotes should indicate a successful completion of the

copying process.

a. The 45608’s screen will display SUCCESSFUL.

b. Other GE models or other brands will indicate success in

various ways, depending on the remote’s capabilities.

Please refer to its instructions for details.

Transferring only Network and Primary status to a new remote:

1. Enter Z-Wave setup mode and highlight TRANSFER

2. Press OK; the screen will display CREATE SECONDARY

3. Press the right arrow key once; the screen will display

CONTROLLER SWAP.

4. Press OK; the screen will display ALL

5. Press the right ARROW key once; the screen will display

NETWORK ONLY.

6. Place the Secondary remote in RECEIVE mode. See the

following section on “Receiving Network and Device

Information” if the Secondary remote is a GE 45608 remote.

If the Secondary remote is a different GE model or different

brand, please refer to its instructions for details.

7. After the Secondary remote is in the RECEIVE mode press

OK on the Primary remote; the screen will display SENDING.

The Primary remote then transmits the network and device

information to the new Secondary remote.

8. Both remotes should indicate a successful completion of the

copying process.

a. The 45608’s screen will display SUCCESSFUL.

b. Other GE models or other brands will indicate success in

various ways, depending on the remote’s capabilities.

Please refer to its instructions for details.

Receiving Network and Device Information

1. Enter Z-Wave setup mode and highlight TRANSFER

2. Press OK; the screen will display CREATE SECONDARY

3. Use the ARROW keys to scroll to RECEIVE.

4. Press OK; the screen will display RECEIVING

5. Place the Primary remote in “Transmit” mode. See the previous

section on “Creating a Secondary Controller” or “Controller

Swap” if the Primary controller is a GE 45608 remote. If the

Primary remote is a different GE model or different brand,

please refer to its instructions for details.

6. After the Primary remote is in the “Transmit” mode, press OK

on this remote; the screen will display RECEIVING. The Primary

remote then transmits the network and device information to

the new remote.

7. Both remotes should indicate a successful completion of the

copying process.

a. The 45608’s screen will display SUCCESSFUL.

b. Other GE models or other brands will indicate success in

various ways, depending on the remote’s capabilities. Please

refer to its instructions for details.

Network

Remove All

Failed Nodes

Reset

Recovery

Update

Resetting Your Network

You can reset your network to clear all device and Z-Wave

network information from the remote. This does not reset the

Z-Wave devices to their factory default. Each device still needs to

be deleted in order to reset them. Please refer to the section on

“Deleting a Device (Node/Light) from Your Network” for details.

To reset your network:

1. Enter Z-Wave setup mode and scroll to NETWORK

2. Press OK; the screen will display RESET

3. Press OK; the screen will display RESETTING

4. When the screen displays SUCCESSFUL your remote has

been reset.

5. Delete all individual devices to reset them to their factory

defaults. This step must be completed in order to use the

devices in a new network.

Recovering Network Information

This forces a re-discovery of all the devices in your network,

verifies communications between devices and rebuilds the

routing tables. The remote must be the Primary controller to

perform this function. All secondary controllers should be updated

using the “create secondary Controller” instructions after a

successful network recovery. You must have at least 2 nodes in

your network to perform a recovery.

To recover network information:

1. Enter Z-Wave setup mode and highlight NETWORK

2. Press OK; the screen will display RESET

3. Use the ARROW keys to scroll to RECOVER.

4. Press OK; the screen will display RECOVERING

5. When the screen displays SUCCESSFUL you have successfully

recovered network information and rebuilt the routing tables

Network Update

This function only works if you have a Static Update Controller

(SUC) in your network. An SUC is permanently installed in a specific

location and helps maintain up-to-date “neighbor lists” and routing

tables for your control network. This command sends a request

to the SUC for the current network topology and ensures that the

hand-held remote includes the latest network information.

Interoperability with Z-Wave^™Devices

A Z-Wave^™network can integrate devices of various classes, and

these devices can be made by different manufacturers. Although

every Z-Wave certified product is designed to work with all other

Z-Wave certified products, your controller must include the appro-

priate device classifications in order to control non-lighting Z-wave

devices. As an example, the GE 45600 basic remote is designed

only for controlling Z-Wave devices using the lighting control

classification. The GE 45601 remote with LCD readout can control

other Z-Wave certified devices like thermostats as well as lighting.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off or on, the user should:

• Relocate or reorient the TV or radio antenna

• Increase the separation between the device and the receiver.

Any changes or modifications to the equipment without JASCO’s

express consent will void the user’s right to operate this equipment.

FCC ID: MG345608

Compliance with IC Rules and Regulations

IC: 6924A-45608

Jasco Products Company

Model: 45608

Object is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference

that may cause undesired operation of the device.”

WARRANTY

JASCO Products warrants this product to be free from

manufacturing defects for a period of two years from the

original date of consumer purchase. This warranty is limited to the

repair or replacement of this product only and does not extend to

consequential or incidental damage to other products that may be

used with this product. This warranty is in lieu of all other warran-

ties, expressed or implied. Some states do not allow limitations

on how long an implied warranty lasts or permit the exclusion or

limitation of incidental or consequential damage, so the above

limitations may not apply to you. This warranty gives you specific

rights, and you may also have other rights which vary from state

to state. Please contact Customer Service at 800-654-8483

(option 4) between 7:30AM – 5:00PM CST or via our website

(www.jascoproducts.com) if the unit should prove defective within

the warranty period.

JASCO Products Company

10 E Memorial Rd.

Oklahoma City, OK 73114

The GE logo is a trademark of the General Electric

Company and is used under license to

Jasco Products Company LLC.

Made in China

Setup Codes for Compatible Brands of

Audio/Video Devices

Códigos de Programación de Audio/Video de Marcas Compatibles

For Home Automation

Automatización del Hogar

Frigidaire . . . . . . . . . . . . . . . . . . . . 1333 Security System. . . . . . . . . . . . . . 0167

GE. . . . . . . . . . . . . . . . . . . . . . . . . . . 0240 Universal . . . . . . . . . . . . . . . . . . . . 0167

Marmitek . . . . . . . . . . . . . . . . . . . . 0167 Universal X10. . . . . . . . . . . . . . . . 0167

One For All. . . . . . . . . . . . . . . . . . . 0167 Whirlpool . . . . . . . . . . . . . . . . . . . . 1332

RadioShack. . . . . . . . . . . . . . . . . . 0240 X10. . . . . . . . . . . . . . . . . . . . . . . . . . 0167

Russound. . . . . . . . . . . . . . 1232, 1233

Receptores de Audio

For Audio - Receiver

ADC . . . . . . . . . . . . . . . . . . . . . . . . . 0531 Onkyo . . . . . 0842, 1298, 1320, 1531

Aiwa. . . . . . . 1405, 0121, 1388, 1641 Optimus . . . . . . . . .1023, 0014, 0121,

. . . . . . . . . . . . . . . . . . 0531, 0670, 1074

Oritron. . . . . . . . . . . . . . . . . . . . . . . 1366

Panasonic . . . . . . .1308, 1518, 1288,

. . . . . . 1316, 1548, 1633, 1763, 1764

Philips . . . . . 1189, 1269, 0891, 1266

Pioneer . . . . . . . . . .1023, 0014, 0150,

. . . . . . . . . . . . . . . . . . 0531, 0630, 1384

Polk Audio . . . . . . . . . . . . . . . . . . . 1289

Proscan . . . . . . . . . . . . . . . . . . . . . 1254

RadioShack. . . . . . . . . . . . . . . . . . 1609

RCA . . . . . . .1023, 1609, 1254, 0531,

. . . . . . . . . . . . . . . . . . 1074, 1390, 1511

Realistic . . . . . . . . . . . . . . . 1609, 0121

Rio . . . . . . . . . . . . . . . . . . . . . . . . . . 1869

Samsung . . . . . . . . 1295, 1304, 1500

Sansui . . . . . . . . . . . . . . . . . . . . . . . 1189

Sanyo . . . . . . . . . . . . . . . . . 1469, 1801

Sherwood . . . . . . . . . . . . . 1077, 1653

Sonic Blue . . . . . . . . . . . . . . . . . . . 1869

Sony. . . . . . .1058, 1441, 1258, 1759,

. . . . . . 1622, 1558, 1658, 1758, 1858

Soundesign. . . . . . . . . . . . . . . . . . 0670

Stereophonics . . . . . . . . . . . . . . . 1023

Sunfire. . . . . . . . . . . . . . . . . . . . . . . 1313

Teac. . . . . . . . . . . . . 1074, 1390, 1528

Technics. . . . . . . . . 1308, 1518, 1633

Thorens . . . . . . . . . . . . . . . . . . . . . 1189

Toshiba. . . . . . . . . . . . . . . . . . . . . . 0842

Venturer. . . . . . . . . . . . . . . . . . . . . 1390

Wards . . . . . . . . . . . . . . . . . . . . . . . 0014

Yamaha . . . . . . . . .1023, 0176, 1176,

. . . . . . . . . . . . . . . . . . 1276, 1331, 1375

Zenith . . . . . . . . . . . . . . . . . . . . . . . 1293

Alco . . . . . . . . . . . . . . . . . . . . . . . . . 1390

AMC . . . . . . . . . . . . . . . . . . . . . . . . . 1077

Anam. . . . . . . . . . . . . . . . . . 1609, 1074

Arcam . . . . . . . . . . . . . . . . . . . . . . . 1189

Audiotronic . . . . . . . . . . . . . . . . . . 1189

Audiovox . . . . . . . . . . . . . . . . . . . . 1390

B & K . . . . . . . . . . . . . . . . . . 0701, 0840

Bose. . . . . . . . . . . . . 1229, 1253, 1933

Capetronic. . . . . . . . . . . . . . . . . . . 0531

Carver. . . . . . . . . . . 1189, 0121, 1289

Curtis Mathes. . . . . . . . . . . . . . . . 0014

Denon . . . . . 1360, 0121, 1142, 1306

Emerson. . . . . . . . . . . . . . . . . . . . . 0531

Fisher. . . . . . . . . . . . . . . . . . . . . . . . 1801

Harman/Kardon . . . . . . .0110, 0891,

. . . . . . . . . . . . . . . . . . 1289, 1304, 1306

Hitachi . . . . . . . . . . . . . . . . . . . . . . 1801

Insignia. . . . . . . . . . . . . . . . . . . . . . 1077

Integra . . . . . . . . . . 0842, 1298, 1320

JBL . . . . . . . . . . . . . . . . . . . . 0110, 1306

JVC. . . . . . . . . . . . . . 1058, 1374, 1495

Kawasaki. . . . . . . . . . . . . . . . . . . . 1390

Kenwood . . . . . . . . . . . . . . 1313, 1570

KLH . . . . . . . . . . . . . . . . . . . 1390, 1428

Koss. . . . . . . . . . . . . . . . . . . . . . . . . 1366

LG . . . . . . . . . . . . . . . . . . . . . . . . . . . 1293

Magnavox . . . . . . .1189, 1269, 0531,

. . . . . . . . . . . . . . . . . . . . . . . . 1266, 1514

Marantz . . . 1189, 1269, 0891, 1289

McIntosh . . . . . . . . . . . . . . . . . . . . 1289

Micromega . . . . . . . . . . . . . . . . . . 1189

Myryad . . . . . . . . . . . . . . . . . . . . . . 1189

Nakamichi. . . . . . . . . . . . . . . . . . . 1313

Amplificadores de Audio

For Audio - Amplifier

Mark Levinson . . . . . . . . . . . . . . . 1483

McIntosh . . . . . . . . . . . . . . . . . . . . 0251

NEC . . . . . . . . . . . . . . . . . . . . . . . . . 0264

Parasound. . . . . . . . . . . . . . . . . . . 1934

Philips . . . . . . . . . . . . . . . . . . . . . . . 0892

Polk Audio . . . . . . . . . . . . . . . . . . . 0892

Primare. . . . . . . . . . . . . . . . . . . . . . 1395

Shure. . . . . . . . . . . . . . . . . . . . . . . . 0264

Sony. . . . . . . . . . . . . . . . . . . . . . . . . 1126

Victor. . . . . . . . . . . . . . . . . . . . . . . . 0331

Yamaha . . . . . . . . . . . . . . . 0354, 0133

Adcom . . . . . . . . . . . . . . . . . . . . . . 1100

Bel Canto Design . . . . . . . . . . . . 1583

Bose. . . . . . . . . . . . . . . . . . . . . . . . . 0674

Carver. . . . . . . . . . . . . . . . . . . . . . . 0892

Classe . . . . . . . . . . . . . . . . . . . . . . . 1461

Halcro . . . . . . . . . . . . . . . . . . . . . . . 1934

Harman/Kardon . . . . . . . . . . . . . 0892

JVC. . . . . . . . . . . . . . . . . . . . . . . . . . 0331

Left Coast . . . . . . . . . . . . . . . . . . . 0892

Lexicon. . . . . . . . . . . . . . . . . . . . . . 1802

Marantz . . . . . . . . . . . . . . . . . . . . . 0892

Reproductores de CDs

For Audio - CD

DKK . . . . . . . . . . . . . . . . . . . . . . . . . 0000 RadioShack. . . . . . . . . . . . 0000, 0180

Fisher. . . . . . . . . . . . . . . . . . . . . . . . 0000 RCA . . . . . . . . . . . . . . . . . . . . . . . . . 1062

Harman/Kardon . . . . . . . . . . . . . 0100 Realistic . . . . . . . . . . . . . . . 0000, 0180

Inkel. . . . . . . . . . . . . . . . . . . . . . . . . 0180 Sansui . . . . . . . . . . . . . . . . . . . . . . . 0000

Integra . . . . . . . . . . . . . . . . . . . . . . 0101 Sanyo . . . . . . . . . . . . . . . . . . . . . . . 0000

JVC. . . . . . . . . . . . . . . . . . . . . . . . . . 0072 Sharp. . . . . . . . . . . . . . . . . . . . . . . . 0180

Kenwood . . . . . . . . . . . . . . . . . . . . 0000 Sherwood . . . . . . . . . . . . . . . . . . . 0180

Marantz . . . . . . . . . . . . . . . . . . . . . 0180 Sony. . . . . . . . . . . . .0490, 0000, 0100,

. . . . . . . . . . . . . . . . . . . . . . . . 1364, 0185

Symphonic . . . . . . . . . . . . . . . . . . 0180

Teac. . . . . . . . . . . . . . . . . . . 0490, 0180

Victor. . . . . . . . . . . . . . . . . . . . . . . . 0072

Yamaha . . . . . . . . . 0490, 0036, 1292

Yorx . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Memorex . . . . . . . . . . . . . . . . . . . . 0000

Miro . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Modulaire. . . . . . . . . . . . . . 0000, 0180

Onkyo . . . . . . . . . . . . . . . . . 1327, 0101

Optimus . . . . . . . . . . . . . . . . . . . . . 0000

Panasonic . . . . . . . . . . . . . 0388, 0752

Pioneer . . . . . . . . . . . . . . . . 1062, 1087

Reproductores de Audiocasete

For Audio - Cassette Deck

Aiwa. . . . . . . . . . . . . . . . . . . . . . . . . 0029 Philips . . . . . . . . . . . . . . . . . . . . . . . 0029

Carver. . . . . . . . . . . . . . . . . . . . . . . 0029 Pioneer . . . . . . . . . . . . . . . . . . . . . . 0027

Denon . . . . . . . . . . . . . . . . . . . . . . . 0076 Polk Audio . . . . . . . . . . . . . . . . . . . 0029

Grundig . . . . . . . . . . . . . . . . . . . . . 0029 RCA . . . . . . . . . . . . . . . . . . . . . . . . . 0027

Harman/Kardon . . . . . . . 0182, 0029 Sansui . . . . . . . . . . . . . . . . . . . . . . . 0029

JVC. . . . . . . . . . . . . . . . . . . . . . . . . . 0244 Sony. . . . . . . . . . . . . 0243, 0170, 0291

Magnavox . . . . . . . . . . . . . . . . . . . 0029 Wards . . . . . . . . . . . . . . . . . . . . . . . 0027

Marantz . . . . . . . . . . . . . . . . . . . . . 0029 Yamaha . . . . . . . . . . . . . . . . . . . . . 0097

Optimus . . . . . . . . . . . . . . . . . . . . . 0027

Accesorios de Audio

For Audio - Accessory

Aiwa. . . . . . . . . . . . . . . . . . . . . . . . . 0159 DLO . . . . . . . . . . . . . . . . . . . . . . . . . 1155

Altec Lansing . . . . . . . . . . 0607, 1056 Imerge . . . . . . . . . . . . . . . . . . . . . . 1491

Apple. . . . . . . . . . . . . . . . . . 1115, 1644 iPort . . . . . . . . . . . . . . . . . . . . . . . . . 2042

D-Link . . . . . . . . . . . . . . . . . . . . . . . 1522 Marantz . . . . . . . . . . . . . . . . . . . . . 1491

Accesorios de Audio, cont.

For Audio - Accessory, cont.

NaviPod . . . . . . . . . . . . . . . . . . . . . 1644 Sonance. . . . . . . . . . . . . . . . . . . . . 2042

Netgear . . . . . . . . . . . . . . . . . . . . . 1785 Sony. . . . . . . . . . . . . . . . . . . . . . . . . 0159

Roku. . . . . . . . . . . . . . . . . . . . . . . . . 1828 SSI. . . . . . . . . . . . . . . . . . . . . . . . . . . 1522

Slim Devices . . . . . . . . . . . . . . . . . 1844 Yamaha . . . . . . . . . . . . . . . 1809, 1810

For Cable Set Top Box

Convertidores de Cable

Nova Vision. . . . . . . . . . . . . . . . . . 0008

Novaplex . . . . . . . . . . . . . . . . . . . . 0008

Pace. . . . . . . 1877, 0877, 0237, 0008

Panasonic . 0000, 0008, 0144, 0107

Paragon . . . . . . . . . 0000, 0008, 0525

Penney . . . . . . . . . . . . . . . . . . . . . . 0000

A-Mark . . . . . . . . . . . . . . . . 0008, 0144

ABC . . . . . . . . . . . . . 0237, 0003, 0008

Accuphase . . . . . . . . . . . . . . . . . . 0003

Acorn. . . . . . . . . . . . . . . . . . . . . . . . 0237

Action . . . . . . . . . . . . . . . . . . . . . . . 0237

Active . . . . . . . . . . . . . . . . . . . . . . . 0237

Archer . . . . . . . . . . . . . . . . . . . . . . . 0237 Philips . . . . . . . . . . . . . . . . . 1305, 0317

BCC . . . . . . . . . . . . . . . . . . . . . . . . . 0276 Pioneer . . . . 1877, 0877, 0144, 0533

British Telecom . . . . . . . . . . . . . . 0003 Pulsar . . . . . . . . . . . . . . . . . . . . . . . 0000

Century. . . . . . . . . . . . . . . . . . . . . . 0008 Quasar . . . . . . . . . . . . . . . . . . . . . . 0000

Digeo. . . . . . . . . . . . . . . . . . . . . . . . 1187 Regal . . . . . . . . . . . . . . . . . . . . . . . . 0276

Director. . . . . . . . . . . . . . . . . . . . . . 0476 Runco . . . . . . . . . . . . . . . . . . . . . . . 0000

Fosgate . . . . . . . . . . . . . . . . . . . . . 0276 Samsung . . . . . . . . . . . . . . 0003, 0144

GE. . . . . . . . . . . . . . . . . . . . . . . . . . . 0144 Scientific Atlanta. . . . . . .1877, 0877,

. . . . . . 0477, 0237, 0003, 0000, 0008

General Instrument . . . .0476, 0810,

. . . . . . . . . . . . . . . . . . . . . . . . 0276, 0003 Sony. . . . . . . . . . . . . . . . . . . . . . . . . 1006

Gibralter. . . . . . . . . . . . . . . . . . . . . 0003 Sprucer. . . . . . . . . . . . . . . . . . . . . . 0144

GoldStar. . . . . . . . . . . . . . . . . . . . . 0144 Starcom . . . . . . . . . . . . . . . . . . . . . 0003

Hitachi . . . . . . . . . . . . . . . . 0003, 0008 Supercable . . . . . . . . . . . . . . . . . . 0276

Insight. . . . . . . . . . . . . . . . . 0476, 0810 Torx . . . . . . . . . . . . . . . . . . . . . . . . . 0003

Jerrold. . . . . 0476, 0810, 0276, 0003 Toshiba. . . . . . . . . . . . . . . . . . . . . . 0000

Memorex . . . . . . . . . . . . . . . . . . . . 0000 United Cable. . . . . . . . . . . 0276, 0003

Mitsubishi . . . . . . . . . . . . . . . . . . . 0003 US Electronics . . . 0276, 0003, 0008

Motorola. . . . . . . . .1376, 0476, 0810, Videoway. . . . . . . . . . . . . . . . . . . . 0000

. . . . . . . . . . . . . . . . . . . . . . . . 0276, 1187

Zenith . . . . . . . . . . . . . . . . . 0000, 0525

For Satellite Set Top Box

Receptores de Satélite

Funai . . . . . . . . . . . . . . . . . . . . . . . . 1377

GE. . . . . . . . . . . . . . . . . . . . . 0392, 0566

GOI. . . . . . . . . . . . . . . . . . . . 0775, 1775

Hitachi . . . . . . . . . . . . . . . . 0749, 0819

Bell ExpressVu . . . . . . . . . . . . . . . 0775

Chaparral. . . . . . . . . . . . . . . . . . . . 0216

DirecTV. . . . . . . . . . . . . . . . . . . . . .1377,

0392, 0566, 0639, 1639, 1142, 0247,

0749,1749, 0724, 0819, 1856, 1076, Houston . . . . . . . . . . . . . . . . . . . . . 0775

1392, 1442,1609, 1640

HTS. . . . . . . . . . . . . . . . . . . . 0775, 1775

Hughes Network Systems. . . .1142,

. . . . . . . . . . . . . . . . . . 0749, 1749, 1442

JVC. . . . . . . . . . . . . . . . . . . . 0775, 1775

Magnavox . . . . . . . . . . . . . 0724, 0722

Memorex . . . . . . . . . . . . . . . . . . . . 0724

Dish Network System . .1505, 1005,

. . . . . . . . . . . . . . . . . . . . . . . . 0775, 1775

Dishpro. . . . 1505, 1005, 0775, 1775

Echostar. . . 1505, 1005, 0775, 1775

Expressvu . . . . . . . . . . . . . 0775, 1775

For Satellite Set Top Box, cont.

Convertidores de Cable, cont.

Mitsubishi . . . . . . . . . . . . . . . . . . . 0749 Samsung . . . . . . . .1377, 1142, 1276,

. . . . . . . . . . . . . . . . . . . . . . . . 1442, 1609

SKY. . . . . . . . . . . . . . . . . . . . . . . . . . 0856

Sony. . . . . . . . . . . . . 0639, 1639, 1640

Thomson . . . . . . . . . . . . . . 0392, 0566

Tivo. . . . . . . . . . . . . . . . . . . . 1142, 1442

Motorola. . . . . . . . . . . . . . . . . . . . . 0856

Optimus . . . . . . . . . . . . . . . . . . . . . 0724

Panasonic . . . . . . . . . . . . . 0247, 0701

Paysat. . . . . . . . . . . . . . . . . . . . . . . 0724

Philips . . . . .1142, 0749, 1749, 0775,

. . . . . . 0724, 0819, 1076, 0722, 1442 Toshiba. . . . . . . . . . 0749, 1749, 1285

Pioneer . . . . . . . . . . . . . . . . 1142, 1442 UltimateTV . . . . . . . . . . . . 1392, 1640

Proscan . . . . . . . . . . . . . . . 0392, 0566 Uniden . . . . . . . . . . . . . . . . 0724, 0722

RadioShack. . . . . . . . . . . . 0566, 0775 Zenith . . . . . . . . . . . . . . . . . 0856, 1856

RCA . . . . . . .0392, 0566, 1142, 0775,

. . . . . . . . . . . . 0855, 0143, 1392, 1442

Reproductores Laser Disk (LD)

For Video - Laser Disk Player

Carver. . . . . . . . . . . . . . . . . 0064, 0194 Pioneer . . . . . . . . . . . . . . . . . . . . . . 0059

Denon . . . . . . . . . . . . . . . . . 0059, 0172 Polk Audio . . . . . . . . . . . . . . . . . . . 0194

Harman/Kardon . . . . . . . . . . . . . 0194 Quasar . . . . . . . . . . . . . . . . . . . . . . 0204

Magnavox . . . . . . . 0064, 0194, 0217 Sony. . . . . . . . . . . . . . . . . . . 0193, 0201

Marantz . . . . . . . . . . . . . . . 0064, 0194 Technics. . . . . . . . . . . . . . . . . . . . . 0204

Mitsubishi . . . . . . . . . . . . . . . . . . . 0059 Theta Digital . . . . . . . . . . . . . . . . . 0194

NAD . . . . . . . . . . . . . . . . . . . . . . . . . 0059 Toshiba. . . . . . . . . . . . . . . . . . . . . . 0059

Optimus . . . . . . . . . . . . . . . . . . . . . 0059 Wards . . . . . . . . . . . . . . . . . . . . . . . 0059

Panasonic . . . . . . . . . . . . . . . . . . . 0204 Yamaha . . . . . . . . . . . . . . . . . . . . . 0217

Philips . . . . . . . . . . . . . . . . . 0064, 0194

Reproductores DVD

For Video - DVD

3D LAB . . . . . . . . . . . . . . . . 0503, 0539 Dual . . . . . . . . . . . . . . . . . . . . . . . . . 0675

Accurian. . . . . . . . . . . . . . . . . . . . . 0675 DVD2000 . . . . . . . . . . . . . . . . . . . . 0521

Akai . . . . . . . . . . . . . . . . . . . 0695, 0899 Emerson. . . . . . . . . . . . . . . 0591, 0675

Alba . . . . . . . . . . . . . . . . . . . . . . . . . 0672 Enterprise . . . . . . . . . . . . . . . . . . . 0591

Alco . . . . . . . . . . . . . . . . . . . . . . . . . 0790 Entivo . . . . . . . . . . . . . . . . . 0503, 0539

Apex Digital. . . . . . . . . . . . 0533, 0672 Funai . . . . . . . . . . . . . . . . . . . . . . . . 0675

Audiovox . . . . . . . . . . . . . . . . . . . . 0790 GE. . . . . . . . . . . . . . . . . . . . . . . . . . . 0522

Blue Parade . . . . . . . . . . . . . . . . . 0571 Go Video. . . . . . . . . . . . . . . 0573, 1075

Blue Sky . . . . . . . . . . . . . . . . . . . . . 0695 Goodmans . . . . . . . . . . . . . . . . . . 0790

Broksonic. . . . . . . . . . . . . . . . . . . . 0695 Gradiente. . . . . . . . . . . . . . . . . . . . 0490

California Audio Labs . . . . . . . . 0490 Grundig . . . . . . . . . . . . . . . . . . . . . 0539

Centrex. . . . . . . . . . . . . . . . . . . . . . 0672 Hitachi . . . . . . . . . . . . . . . . 0573, 0664

Citizen . . . . . . . . . . . . . . . . . . . . . . . 0695 Hiteker . . . . . . . . . . . . . . . . . . . . . . 0672

Clairtone . . . . . . . . . . . . . . . . . . . . 0571 Integra . . . . . . . . . . . . . . . . 0571, 0627

Creative . . . . . . . . . . . . . . . 0503, 0539 JMB . . . . . . . . . . . . . . . . . . . . . . . . . 0695

CyberHome. . . . . . . . . . . . . . . . . . 0816 JVC. . . . . . . . 0558, 0623, 0867, 1164

Denon . . . . . . . . . . . . . . . . . 0490, 0634 Kawasaki. . . . . . . . . . . . . . . . . . . . 0790

Digitrex. . . . . . . . . . . . . . . . . . . . . . 0672 Kenwood . . . . . . . . . . . . . . 0490, 0534

Disney. . . . . . . . . . . . . . . . . . . . . . . 0675 KLH . . . . . . . . . . . . . . . . . . . . . . . . . 0790

Reproductores DVD, cont.

For Video - DVD, cont.

Kloss . . . . . . . . . . . . . . . . . . . . . . . . 0533 Realistic . . . . . . . . . . . . . . . . . . . . . 0571

Lasonic. . . . . . . . . . . . . . . . . . . . . . 0627 Reoc. . . . . . . . . . . . . . . . . . . . . . . . . 0752

Lecson . . . . . . . . . . . . . . . . . . . . . . 1533 Rotel . . . . . . . . . . . . . . . . . . . . . . . . 0623

LG . . . . . . . . . . . . . . . . . . . . . . . . . . . 0591 Sampo . . . . . . . . . . . . . . . . . . . . . . 0752

Magnasonic . . . . . . . . . . . . . . . . . 0675 Samsung . . . . . . . .0490, 0573, 0820,

. . . . . . . . . . . . . . . . . . . . . . . . 0899, 1075

Sansui . . . . . . . . . . . . . . . . . . . . . . . 0695

Sanyo . . . . . . . . . . . . . . . . . 0675, 0695

Schwaiger . . . . . . . . . . . . . . . . . . . 0752

Sharp. . . . . . . . . . . . 0630, 0675, 0752

Shinsonic . . . . . . . . . . . . . . . . . . . . 0533

Sonic Blue . . . . . . . . . . . . . . . . . . . 0573

Sony. 0533, 1533, 0864, 1033, 1431

Sylvania . . . . . . . . . . . . . . . . . . . . . 0675

Symphonic . . . . . . . . . . . . . . . . . . 0675

Teac. . . . . . . . . . . . . 0571, 0790, 0809

Magnavox . 0503, 0539, 0646, 0675

Marantz . . . . . . . . . 0503, 0539, 0675

McIntosh . . . . . . . . . . . . . . . . . . . . 1533

Memorex . . . . . . . . . . . . . . . . . . . . 0695

Microsoft . . . . . . . . . . . . . . . . . . . . 0522

Minato. . . . . . . . . . . . . . . . . . . . . . . 0752

Mitsubishi . . . . . . . . . . . . . 1521, 0521

Onkyo . . . . . . . . . . . . . . . . . 0503, 0627

Optimus . . . . . . . . . . . . . . . . . . . . . 0571

Palsonic . . . . . . . . . . . . . . . . . . . . . 0672

Panasonic . . . . . . .0503, 0490, 0571,

. . . . . . . . . . . . 0703, 1362, 1462, 1762 Technics. . . . . . . . . . . . . . . 0490, 0703

Philco. . . . . . . . . . . . . . . . . . . . . . . . 0675 Theta Digital . . . . . . . . . . . . . . . . . 0571

Philips . . . . .0503, 0539, 0646, 0675, Thomson . . . . . . . . . . . . . . . . . . . . 0522

. . . . . . . . . . . . . . . . . . 0854, 1260, 1354

Toshiba. . . .0503, 0573, 0539, 0695,

Pioneer . . . . . . . . . . 0525, 0571, 0631 . . . . . . . . . . . . . . . . . . . . . . . . 1045, 1154

Polk Audio . . . . . . . . . . . . . . . . . . . 0539 Universum. . . . . . . . . . . . . . . . . . . 0591

Presidian . . . . . . . . . . . . . . . . . . . . 0675 Urban Concepts . . . . . . . 0503, 0539

Proceed . . . . . . . . . . . . . . . . . . . . . 0672 Venturer. . . . . . . . . . . . . . . . . . . . . 0790

Proscan . . . . . . . . . . . . . . . . . . . . . 0522 Xbox. . . . . . . . . . . . . . . . . . . . . . . . . 0522

RadioShack. . . . . . . . . . . . . . . . . . 0571 Yamaha . . . . . . . . . 0490, 0539, 0545

RCA . 0522, 0571, 0790, 0822, 1132 Zenith . . . . . . . . . . . . . . . . . 0503, 0591

For Video - VCR

Reproductores VCR

A-Mark . . . . . . . . . . . . . . . . . . . . . . 0000 Criterion . . . . . . . . . . . . . . . . . . . . . 0000

ABS. . . . . . . . . . . . . . . . . . . . . . . . . . 1972 Crosley . . . . . . . . . . 0035, 0081, 0000

Admiral. . . . . . . . . . . . . . . . . . . . . . 0060 Curtis Mathes. . . . 0060, 0035, 0000

Adventura . . . . . . . . . . . . . . . . . . . 0000 CyberPower . . . . . . . . . . . . . . . . . 1972

Aiwa. . . . . . . . . . . . . . . . . . . . . . . . . 0000 Daewoo . . . . . . . . . . . . . . . . . . . . . 0045

Alienware. . . . . . . . . . . . . . . . . . . . 1972 Dell. . . . . . . . . . . . . . . . . . . . . . . . . . 1972

American High. . . . . . . . . 0035, 0081 Denon . . . . . . . . . . . . . . . . . 0081, 0042

DirecTV. . . . . . . . . . . . . . . . . . . . . . 0739

Amstrad . . . . . . . . . . . . . . . . . . . . . 0000

Dual . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Astra . . . . . . . . . . . . . . . . . . . . . . . . 0035

Dynatech. . . . . . . . . . . . . . . . . . . . 0000

Avis . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Electrohome. . . . . . . . . . . 0060, 0000

Bell & Howell. . . . . . . . . . . 0035, 0000

Emerex . . . . . . . . . . . . . . . . . . . . . . 0032

Broksonic. . . . . . . . . . . . . . . . . . . . 1479

Emerson. . . . . . . . . . . . . . . 0000, 1479

Canon . . . . . . . . . . . . . . . . . . . . . . . 0035

Fisher. . . . . . . . . . . . . . . . . . . . . . . . 0000

Carver. . . . . . . . . . . . . . . . . 0035, 0081

Fuji . . . . . . . . . . . . . . . . . . . . 0035, 0033

Citizen . . . . . . . . . . . . . . . . . 0035, 0000

Fujitsu . . . . . . . . . . . . . . . . . . . . . . . 0000

Colortyme . . . . . . . 0060, 0035, 0045

Funai . . . . . . . . . . . . . . . . . . . . . . . . 0000

Colt. . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Reproductores VCR, cont.

For Video - VCR, cont.

Mitsubishi . . . . . . .0060, 0000, 0042,

. . . . . . . . . . . . . . . . . . . . . . . . 0067, 0807

Motorola. . . . . . . . . . . . . . . . . . . . . 0035

MTC . . . . . . . . . . . . . . . . . . . . . . . . . 0000

MTX . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Multitech . . . . . . . . . . . . . . . . . . . . 0000

NEC . . . . . . . . . . . . . . . . . . . . . . . . . 0067

Niveus Media . . . . . . . . . . . . . . . . 1972

Northgate . . . . . . . . . . . . . . . . . . . 1972

Olympus. . . . . . . . . . . . . . . . . . . . . 0035

Optimus . . . . . . . . . 1062, 0035, 0000

Orion . . . . . . . . . . . . . . . . . . 0000, 1479

Panama . . . . . . . . . . . . . . . . . . . . . 0035

Panasonic . . . . . . .1062, 0035, 0000,

. . . . . . . . . . . . . . . . . . 0225, 0614, 0616

Penney . . . .0035, 0081, 0000, 0042,

. . . . . . . . . . . . . . . . . . . . . . . . 0067, 1237

Pentax. . . . . . . . . . . . . . . . . . . . . . . 0042

Philco. . . . . . . . . . . . 0035, 0081, 0000

Philips . . . . .0035, 0081, 0045, 0000,

. . . . . . . . . . . . . . . . . . 0616, 0618, 0739

Pioneer . . . . . . . . . . 0081, 0042, 0067

Polk Audio . . . . . . . . . . . . . . . . . . . 0081

Proscan . . . . . . . . . . . . . . . 0060, 1060

Protec . . . . . . . . . . . . . . . . . . . . . . . 0000

Quartz. . . . . . . . . . . . . . . . . . . . . . . 0035

Quasar . . . . . . . . . . . . . . . . . . . . . . 0035

RadioShack. . . . . . . . . . . . 0035, 0000

RCA . . . . . . .0060, 0035, 0045, 0000,

. . . . . . . . . . . . 0042, 0807, 0880, 1060

Realistic . . . . . . . . . . . . . . . 0035, 0000

ReplayTV . . . . . . . . . . . . . . 0614, 0616

Ricavision. . . . . . . . . . . . . . . . . . . . 1972

Samsung . . . . . . . .0060, 0045, 0000,

. . . . . . . . . . . . . . . . . . . . . . . . 0739, 1014

Sansui . . . . . . . . . . . 0000, 0067, 1479

Sanyo . . . . . . . . . . . . . . . . . . . . . . . 0000

Scott . . . . . . . . . . . . . . . . . . . . . . . . 0045

Sears . . . . . .0060, 0035, 0033, 0045,

. . . . . . . . . . . . 0000, 0042, 0067, 1237

Sharp. . . . . . . . . . . . 0032, 0000, 0807

Shintom . . . . . . . . . . . . . . . . . . . . . 0000

Signature . . . . . . . . 0060, 0035, 0000

Sonic Blue . . . . . . . . . . . . . 0614, 0616

Sony. . . . . . .0035, 0032, 0033, 0000,

. . . . . . . . . . . 0067, 0636, 1232, 1972

Garrard. . . . . . . . . . . . . . . . . . . . . . 0000

Gateway. . . . . . . . . . . . . . . . . . . . . 1972

GE. . . 0060, 0035, 0000, 0807, 1060

Gemini . . . . . . . . . . . . . . . . . . . . . . 0060

Genexxa. . . . . . . . . . . . . . . . . . . . . 0000

Go Video. . . . . . . . . . . . . . . . . . . . . 0614

GoldStar. . . . . . . . . 0035, 0000, 1237

Goodmans . . . . . . . . . . . . 0081, 0000

Gradiente. . . . . . . . . . . . . . . . . . . . 0000

Granada. . . . . . . . . . . . . . . 0081, 0042

Grundig . . . . . . . . . . . . . . . . . . . . . 0081

Harley Davidson . . . . . . . . . . . . . 0000

Harman/Kardon . . . . . . . . . . . . . 0081

Hewlett Packard . . . . . . . . . . . . . 1972

HI-Q . . . . . . . . . . . . . . . . . . . 0035, 0000

Hitachi . . . . 0035, 0045, 0000, 0042

Howard Computers . . . . . . . . . . 1972

HP. . . . . . . . . . . . . . . . . . . . . . . . . . . 1972

Hughes Network Systems. . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . 0042, 0739

Humax . . . . . . . . . . . . . . . . . . . . . . 0739

Hush . . . . . . . . . . . . . . . . . . . . . . . . 1972

Hytek. . . . . . . . . . . . . . . . . . . . . . . . 0000

iBUYPOWER . . . . . . . . . . . . . . . . . 1972

Jensen . . . . . . . . . . . . . . . . . . . . . . 0067

JVC. . . . . . . . . . . . . . . . . . . . . . . . . . 0067

Kenwood . . . . . . . . . . . . . . . . . . . . 0067

Kodak . . . . . . . . . . . . . . . . . . . . . . . 0035

KTV. . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Linksys . . . . . . . . . . . . . . . . . . . . . . 1972

Lloyd’s. . . . . . . . . . . . . . . . . . . . . . . 0000

Loewe . . . . . . . . . . . . . . . . . . . . . . . 0081

Logik . . . . . . . . . . . . . . . . . . . . . . . . 0000

LXI. . . . . . . . . . . . . . . 0000, 0042, 0067

Magnasonic . . . . . . . . . . . . . . . . . 0000

Magnavox . . . . . . .0035, 0081, 0000,

. . . . . . . . . . . . . . . . . . . . . . . . 0618, 1781

Marantz . . . . . . . . . . . . . . . 0035, 0081

Matsushita . . . . . . . . . . . . 0035, 0081

Media Center PC . . . . . . . . . . . . . 1972

MEI . . . . . . . . . . . . . . . . . . . . . . . . . . 0035

Memorex . . . . . . . . 0035, 0000, 1237

MGA. . . . . . . . . . . . . . . . . . . . . . . . . 0060

Microsoft . . . . . . . . . . . . . . . . . . . . 1972

Mind. . . . . . . . . . . . . . . . . . . . . . . . . 1972

Minolta . . . . . . . . . . . . . . . . . . . . . . 0042

Reproductores VCR, cont.

For Video - VCR, cont.

Soundmaster . . . . . . . . . . . . . . . . 0000 TMK . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Stack 9 . . . . . . . . . . . . . . . . . . . . . . 1972 Toshiba. . . . . . . . . .0045, 0000, 0845,

. . . . . . . . . . . . . . . . . . . . . . . . 1972, 1996

Touch . . . . . . . . . . . . . . . . . . . . . . . 1972

Ultra. . . . . . . . . . . . . . . . . . . . . . . . . 0045

Vector . . . . . . . . . . . . . . . . . . . . . . . 0045

Victor. . . . . . . . . . . . . . . . . . . . . . . . 0067

Video Concepts . . . . . . . . . . . . . . 0045

Videosonic. . . . . . . . . . . . . . . . . . . 0000

Viewsonic . . . . . . . . . . . . . . . . . . . 1972

Villain. . . . . . . . . . . . . . . . . . . . . . . . 0000

Voodoo. . . . . . . . . . . . . . . . . . . . . . 1972

Wards . . . . .0060, 0035, 0081, 0033,

. . . . . . . . . . . . . . . . . . 0045, 0000, 0042

White Westinghouse. . . . . . . . . 0000

XR-1000 . . . . . . . . . . . . . . . 0035, 0000

Zenith . . . . . . . . . . . . . . . . . . 0033, 000

STS . . . . . . . . . . . . . . . . . . . . . . . . . . 0042

SV2000 . . . . . . . . . . . . . . . . . . . . . . 0000

SVA. . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Sylvania . . . 0035, 0081, 0000, 1781

Symphonic . . . . . . . . . . . . . . . . . . 0000

Systemax. . . . . . . . . . . . . . . . . . . . 1972

Tagar Systems. . . . . . . . . . . . . . . 1972

Tandy . . . . . . . . . . . . . . . . . . . . . . . 0000

Tatung . . . . . . . . . . 0081, 0000, 0067

Teac. . . . . . . . . . . . . . . . . . . 0000, 0067

Technics. . . . . . . . . . . . . . . 0035, 0000

Teknika . . . . . . . . . . . . . . . . 0035, 0000

Thomas . . . . . . . . . . . . . . . . . . . . . 0000

Thomson . . . . . . . . . . . . . . . . . . . . 0060

Tivo. . . . . . . . 0618, 0636, 0739, 1996

For Video - Accessory

Accesorios de Video

ABS. . . . . . . . . . . . . . . . . . . . . . . . . . 1272 Mind. . . . . . . . . . . . . . . . . . . . . . . . . 1272

Alienware. . . . . . . . . . . . . . . . . . . . 1272 Niveus Media . . . . . . . . . . . . . . . . 1272

CyberPower . . . . . . . . . . . . . . . . . 1272 Northgate . . . . . . . . . . . . . . . . . . . 1272

D-Link . . . . . . . . . . . . . . . . . . . . . . . 1554 Ricavision. . . . . . . . . . . . . . . . . . . . 1272

Gateway. . . . . . . . . . . . . . . . . . . . . 1272 Sony. . . . . . . . . . . . . 1272, 1324, 1364

Hewlett Packard . . . . . . . 1272, 1267 Stack 9 . . . . . . . . . . . . . . . . . . . . . . 1272

Howard Computers . . . . . . . . . . 1272 Systemax. . . . . . . . . . . . . . . . . . . . 1272

HP. . . . . . . . . . . . . . . . . . . . . 1272, 1267 Tagar Systems. . . . . . . . . . . . . . . 1272

Hush . . . . . . . . . . . . . . . . . . . . . . . . 1272 Toshiba. . . . . . . . . . . . . . . . . . . . . . 1272

iBUYPOWER . . . . . . . . . . . . . . . . . 1272 Touch . . . . . . . . . . . . . . . . . . . . . . . 1272

Linksys . . . . . . . . . . . . . . . . 1272, 1365 Viewsonic . . . . . . . . . . . . . . . . . . . 1272

Media Center PC . . . . . . . . . . . . . 1272 Voodoo. . . . . . . . . . . . . . . . . . . . . . 1272

Microsoft . . . . . . . . . . . . . . . . . . . . 1272

For Television Televisores

Alleron. . . . . . . . . . . . . . . . . . . . . . . 0030

Ambassador. . . . . . . . . . . . . . . . . 0150

America Action . . . . . . . . . . . . . . 0180

American High. . . . . . . . . 0000, 0060

A-Mark . . . . . . . . . . . . . . . . 0047, 0054

Accuscan. . . . . . . . . . . . . . . . . . . . 0047

Action . . . . . . . . . . . . . . . . . . . . . . . 0030

Admiral. . . . . . . . . .0047, 0054, 0017,

. . . . . . . . . . . . 0051, 0093, 0463, 0180 Amstrad . . . . . . . . . . . . . . . . . . . . . 0171

Advent . . . . . . . . . . . . . . . . . . . . . . 0761 Amtron . . . . . . . . . . . . . . . . 0000, 0180

Adventuri . . . . . . . . . . . . . . . . . . . . 0000 Anam. . . . . . . . . . . . . . . . . . . . . . . . 0180

Agna . . . . . . . . . . . . . . . . . . . . . . . . 0150 AOC . . . . . . . . . . . . . . . . . . . 0180, 0030

Aiko . . . . . . . . . . . . . . . . . . . . . . . . . 0092 Apex Digital. . . . . . . . . . . . 0156, 0765

Akai . . . . . . . . . . . . .0060, 0812, 0702, Audinac . . . . . . . . . . . . . . . . . . . . . 0180

. . . . . . . . . . . . . . . . . . . . . . . . 0030, 0145

Audiovox . . . . . . . . 0451, 0180, 0092

Televisores, cont.

For Television, cont.

Electroband . . . . . . . . . . . . . . . . . 0000

Electrograph. . . . . . . . . . . . . . . . . 1755

Electrohome. . . . .0154, 0000, 0463,

. . . . . . . . . . . . . . . . . . 0150, 0178, 0030

Emerald . . . . . . . . . . . . . . . . . . . . . 0178

Emerson. . . . . . . . .0047, 0154, 0451,

0236, 0463, 0180, 0150, 0178, 0171

Envision . . . . . . . . . . . . . . . . . . . . . 0030

ESA. . . . . . . . . . . . . . . . . . . . 0812, 0171

Fisher. . . . . . . . . . . . 0054, 0154, 0000

Fortress . . . . . . . . . . . . . . . . . . . . . 0093

Fujitsu . . . . . . . . . . . . . . . . . 0683, 0809

Funai . . . . . . . . . . . . 0000, 0180, 0171

Futuretech. . . . . . . . . . . . . . . . . . . 0180

Gateway. . . . . . . . . . . . . . . 1756, 1755

GE. . . . . . . . .1447, 0047, 0000, 0051,

0451, 0060, 0178, 0030, 1347

Gemini . . . . . . . . . . . . . . . . . . . . . . 0047

Gibralter. . . . . . . . . 0017, 0000, 0030

GoldStar. . . 0047, 0054, 0178, 0030

Gradiente. . . . . . . . . . . . . . . . . . . . 0053

Grundig . . . . . . . . . . . . . . . . . . . . . 0683

Grundy . . . . . . . . . . . . . . . . . . . . . . 0180

Grunpy . . . . . . . . . . . . . . . . . . . . . . 0180

Hallmark . . . . . . . . 0236, 0180, 0178

Harley Davidson . . . . . . .0000, 0180,

. . . . . . . . . . . . . . . . . . 0060, 0178, 0030

Harman/Kardon . . . . . . . . . . . . . 0054

Harvard . . . . . . . . . . . . . . . . . . . . . 0180

Havermy . . . . . . . . . . . . . . . . . . . . 0093

Heathkit . . . . . . . . . . . . . . . . . . . . . 0017

Hello Kitty . . . . . . . . . . . . . . . . . . . 0451

Hitachi . . . .0047, 0054, 0017, 0000,

. . . . . . . . . . . . . . . . . . 0051, 1145, 0145

Ima. . . . . . . . . . . . . . 0236, 0180, 0178

Infinity. . . . . . . . . . . . . . . . . . . . . . . 0054

Aventura . . . . . . . . . . . . . . . . . . . . 0171

Baysonic . . . . . . . . . . . . . . . . . . . . 0180

Beaumark . . . . . . . 0017, 0178, 0030

Belcor . . . . . . . . . . . . . . . . . . . . . . . 0030

Bell & Howell. . . . . 0054, 0154, 0093

Bradford. . . . . . . . . . . . . . . . . . . . . 0180

Brockwood . . . . . . . . . . . . 0178, 0030

Broksonic. . . . . . . . 0236, 0463, 0180

Candle. . . . . . . . . . . . . . . . . . . . . . . 0030

Capehart . . 0017, 0178, 0030, 0092

Carnivale . . . . . . . . . . . . . . . . . . . . 0030

Carver. . . . . . . . . . . . . . . . . . . . . . . 0054

Celebrity. . . . . . . . . . . . . . . . . . . . . 0000

Celera . . . . . . . . . . . . . . . . . . . . . . . 0765

Changhong. . . . . . . . . . . . 0156, 0765

Cineral. . . . . . . . . . . . . . . . . 0451, 0092

Citek. . . . . . . . . . . . . . . . . . . . . . . . . 0047

Citizen . . . . .0054, 0000, 0451, 0463,

. . . . . . 0180, 0060, 0030, 0171, 0092

Clarion . . . . . . . . . . . . . . . . . . . . . . 0180

Classic. . . . . . . . . . . . . . . . . 0030, 0092

Colortyme . . . . . . .0047, 0054, 0017,

. . . . . . . . . . . . . . . . . . 0060, 0178, 0030

Commercial Solutions. . 1447, 0047

Conic . . . . . . . . . . . . . . . . . . . . . . . . 0178

Contec . . . . . . . . . . . . . . . . . . . . . . 0180

Craig . . . . . . . . . . . . . . . . . . 0180, 0171

Crosley . . . . . . . . . .0054, 0000, 0180,

. . . . . . . . . . . . . . . . . . . . . . . . 0030, 0171

Crown . . . . . . . . . . . . . . . . . 0093, 0180

Curtis Mathes. . . . . . . . . .0047, 0054,

0154, 0000, 0051, 0451, 0093, 0180,

0060, 0702, 0178, 0030, 0145, 0166,

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1347

CXC . . . . . . . . . . . . . . . . . . . . . . . . . 0180

Daewoo . . . . . . . . .0451, 0178, 0092,

. . . . . . . . . . . . . . . . . . . . . . . . 1756, 1755 Insignia. . . . . . . . . . . . . . . . . . . . . . 0171

Dayton . . . . . . . . . . . . . . . . . . . . . . 0092 Inteq . . . . . . . . . . . . . . . . . . 0017, 0145

Daytron . . . . . . . . . 0178, 0030, 0092 JBL . . . . . . . . . . . . . . . . . . . . . . . . . . 0054

Dell. . . . . . . . . . . . . . . . . . . . . . . . . . 1178 JCB. . . . . . . . . . . . . . . . . . . . . . . . . . 0000

Jensen . . . . . . . . . . . . . . . . . . . . . . 0761

Denon . . . . . . . . . . . . . . . . . . . . . . . 0145

JIL. . . . . . . . . . . . . . . . . . . . . . . . . . . 0030

Dumont . . . . . . . . . 0017, 0180, 0178

Jutan. . . . . . . . . . . . . . . . . . . . . . . . 0030

Durabrand. . . . . . .0463, 0180, 0178,

JVC. . . . . . . .0054, 0053, 0030, 0650,

. . . . . . . . . . . . . . . . . . . . . . . . 0731, 1253

Kamp. . . . . . . . . . . . . . . . . . 0017, 0180

Kawasho . . . . . . . . . . . . . . . . . . . . 0030

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0171

Dwin . . . . . . . . . . . . . . . . . . . . . . . . 0093

Dynex . . . . . . . . . . . . . . . . . . . . . . . 1463

Eaton. . . . . . . . . . . . . . . . . . . . . . . . 0060

Televisores, cont.

For Television, cont.

Orion . . . . . .0017, 0236, 0463, 0180,

. . . . . . . . . . . . . . . . . . . . . . . . 0178, 1463

Pace. . . . . . . . . . . . . . . . . . . . . . . . . 0092

Panasonic . . . . . . .0054, 0000, 0156,

. . . . . . 0250, 0051, 0236, 0030, 0650

Paxonic. . . . . . . . . . . . . . . . 0060, 0030

PCE. . . . . . . . . . . . . . . . . . . . 0156, 0060

Penney . . . .0047, 0000, 0156, 0250,

. . . . . . 0051, 0060, 0178, 0030, 1347

Philco. . . . . . 0054, 0463, 0030, 0145

Philips . . . . .1454, 0054, 0030, 0171,

. . . . . . . . . . . . . . . . . . . . . . . . 0690, 1254

Pilot . . . . . . . 0051, 0060, 0178, 0030

Pioneer . . . . . . . . . . . . . . . . 0166, 0679

Polaroid . . . . . . . . . . . . . . . . . . . . . 0765

Portland . . . . . . . . . . . . . . . 0451, 0092

Precision. . . . . . . . . . . . . . . 0236, 0180

Prima. . . . . . . . . . . . . . . . . . . . . . . . 0761

Prism . . . . . . . . . . . . . . . . . . 0250, 0051

Proscan . . . . . . . . . 1447, 0047, 1347

Proton. . . . . . . . . . . . . . . . . . . . . . . 0178

Pulsar . . . . . . . . . . . . . . . . . 0017, 0092

Pulser . . . . . . . . . . . . . . . . . 0178, 0092

Quartz. . . . . . . . . . . . . . . . . 0150, 0178

Quasar . . . . . . . . . . 0250, 0051, 0650

KEC. . . . . . . . . . . . . . . . . . . . 0180, 0060

Kenwood . . . . . . . . . . . . . . 0180, 0030

KLH . . . . . . . . . . . . . 0156, 0180, 0765

Kloss . . . . . . . . . . . . . . . . . . . . . . . . 0030

Konka . . . . . . . . . . . . . . . . . . . . . . . 0180

KTV. . . . . . . . . . . . . . 0463, 0180, 0030

Lark . . . . . . . . . . . . . . . . . . . . . . . . . 0154

LG . . . . . . . . .0054, 1265, 0060, 0178,

. . . . . . . . . . . . . . . . . . 0030, 0856, 1178

Lloyd’s. . . . . . . . . . . 0236, 0180, 0030

Logik . . . . . . . . . . . . . . . . . . 0236, 0180

LXI. . 0047, 0054, 0017, 0154, 0000,

0156, 0051, 0093, 0060, 0053, 0178,

. . . . . . . . . . . . . . . . . . 0030, 0171, 0166

Magnasonic . . . . .0054, 0000, 0156,

. . . . . . . . . . . . . . . . . . 0093, 0030, 0092

Magnavox . . . . . . .0047, 1454, 0054,

0154, 0000, 0250, 0051, 0180, 0060,

. . . . . . 0030, 0171, 0092, 1254, 1755

Majestic . . . . . . . . . . . . . . . . . . . . . 0017

Marantz . . . . . . . . . 1454, 0054, 0030

Matsushita . . . . . . 0250, 0051, 0650

Maxent . . . . . . . . . . . . . . . . 1756, 1755

Megatron. . . . . . . . 0047, 0178, 0145

Memorex . . . . . . . .0154, 0463, 0180,

. . . . . . . . . . . . . . . . . . 0150, 0178, 0030 Rabbit . . . . . . . . . . . . . . . . . . . . . . . 0047

MGA. . . . . . . . . . . . . 0150, 0178, 0030 RadioShack. . . . . .0047, 0154, 0180,

. . . . . . . . . . . . . . . . . . 0150, 0178, 0030

RCA . . . . . . .1447, 0047, 0054, 0000,

0051, 0093, 0178, 0090, 0679, 1047,

. . . . . . . . . . . . . . . . . . . . . . . . 1347, 1547

Realistic . . .0047, 0154, 0180, 0150,

. . . . . . . . . . . . . . . . . . . . . . . . 0178, 0030

Runco . . . . . . . . . . . 0017, 0060, 0030

Sampo . . . . 0047, 0030, 1756, 1755

Samsung . .0047, 0054, 0017, 0154,

0060, 0812, 0702, 0178, 0030, 1060

Sanky . . . . . . . . . . . . . . . . . 0060, 0030

Sansui . . . . . . . . . . . 0463, 0060, 0030

Sanyo . . . . .0047, 0054, 0154, 0000,

Sanyo . . . . . . . . . . . 0463, 0171, 1755

Saville . . . . . . . . . . . . . . . . . . . . . . . 0060

Scotch. . . . . . . . . . . . . . . . . . . . . . . 0178

Scott . . . . . . 0236, 0180, 0178, 0030

Sears . . . . . .0047, 0054, 0017, 0154,

0000, 0156, 0051, 0093, 0060, 0053,

. . . . . . . . . . . . 0178, 0030, 0171, 0166

Sharp. . . . . . . . . . . . 0054, 0093, 0180

MGN Technology . . . . . . . . . . . . 0178

Micro Genius. . . . . . . . . . . . . . . . . 0150

Midland. . . . . . . . . . 0047, 0017, 0051

Mitsubishi .0154, 0093, 1250, 0150,

. . . . . . . . . . . . . . . . . . 0178, 0030, 0836

Motorola. . . 0054, 0051, 0093, 0150

MTC . . . . . . . 0180, 0060, 0030, 0092

Multitech . . . . . . . . . . . . . . . . . . . . 0180

NAD . . . . . . . 0156, 0178, 0166, 1156

NEC . . . . . . . 0047, 0178, 0030, 1704

NetTV . . . . . . . . . . . . . . . . . . . . . . . 1755

Nikko . . . . . . . . . . . . 0178, 0030, 0092

Nikkodo . . . . . . . . . 0178, 0030, 0092

Nishi. . . . . . . . . . . . . . . . . . . . . . . . . 0030

NTC . . . . . . . . . . . . . . . . . . . . . . . . . 0092

Nyon . . . . . . . . . . . . . . . . . . . . . . . . 0000

Onwa. . . . . . . . . . . . . . . . . . . . . . . . 0180

Optimus . . .0154, 0250, 0093, 0180,

. . . . . . 0150, 0178, 0030, 0166, 0650

Optonica . . . . . . . . . . . . . . . . . . . . 0093

Televisores, cont.

For Television, cont.

TNCi . . . . . . . . . . . . . . . . . . . . . . . . . 0017

Tocom. . . . . . . . . . . . . . . . . . . . . . . 0156

Toshiba. . . .0154, 1256, 0156, 0150,

1265, 0060, 1145, 0145, 0166, 0650,

. . . . . . . . . . . . 0845, 1156, 1656, 1704

Totevision . . . . . . . . . . . . . . . . . . . 0051

Toyomenka. . . . . . . . . . . . . . . . . . 0178

Truetone. . . . . . . . . . . . . . . 0250, 0051

TVS. . . . . . . . . . . . . . . . . . . . . . . . . . 0463

Ultra. . . . . . . . . . . . . . . . . . . . . . . . . 0092

Universal . . . . . . . . . . . . . . . . . . . . 0047

V . . . . . . . . . . . . . . . . 1756, 0885, 1755

Vector Research . . . . . . . . . . . . . 0030

Victor. . . . . . . . . . . . . . . . . . . . . . . . 0053

Vidikron . . . . . . . . . . . . . . . . . . . . . 0054

Vidtech . . . . . . . . . . . . . . . . . . . . . . 0178

Viewsonic . . . . . . . . . . . . . 0885, 1755

Viking . . . . . . . . . . . . . . . . . . . . . . . 0060

Vizio. . 1756, 0885, 1755, 0178, 1265

Wards . . . . .0047, 0054, 0017, 0154,

0000, 0051, 0093, 0236, 0178, 0030,

. . . . . . . . . . . . . . . . . . . . . . . . 0166, 1156

Waycon . . . . . . . . . . . . . . . . . . . . . 0156

Welton . . . . . . . . . . . . . . . . . . . . . . 0178

Westinghouse . . . 0000, 0451, 0885

White Westinghouse. . .0451, 0236,

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0463

World. . . . . . 0451, 0236, 0463, 0180

XR-1000 . . . . . . . . . 0154, 0180, 0171

Yamaha . . . . . . . . . . . . . . . . . . . . . 0030

Yorx . . . . . . . . . . . . . . . . . . . . . . . . . 0030

Zenith . . . . .0047, 0017, 0000, 0093,

0463, 1265, 0812, 0178, 0030, 1145,

. . . . . . . . . . . . . . . . . . 0145, 0171, 0092

Sheng Chia . . . . . . . . . . . . . . . . . . 0093

Shivaki. . . . . . . . . . . . . . . . . . . . . . . 0178

Siemens . . . . . . . . . . . . . . . . . . . . . 0145

Signature . . . . . . . . 0047, 0093, 0030

Simpson . . . . . . . . . . . . . . . 0178, 0030

Singer . . . . . . . . . . . . . . . . . 0060, 0092

Solar Drape. . . . . . . . . . . . . . . . . . 0000

Sony. . . . . . .0017, 0154, 1100, 0000,

. . . . . . . . . . . . . . . . . . . . . . . . 0150, 0053

Soundesign. . . . . . . . . . . . 0180, 0178

Spectravision . . . . . . . . . . 0156, 0178

Squareview. . . . . . . . . . . . . . . . . . 0171

SR2000 . . . . . . . . . . . . . . . . 0154, 0171

SSS . . . . . . . . . . . . . . . . . . . . . . . . . . 0180

Starlite. . . . . . . . . . . . . . . . . 0236, 0180

Superscan. . . . . . . . . . . . . . . . . . . 0093

Supreme . . . . . . . . . . . . . . . . . . . . 0000

SV2000 . . . . . . . . . . . . . . . . . . . . . . 0054

Sylvania . . .0047, 0054, 0154, 0000,

. . . . . . 0051, 0178, 0030, 0171, 0092

Symphonic 0000, 0180, 0178, 0171

Tandy . . . . . . . . . . . . . . . . . . . . . . . 0093

Tatung . . . . . . . . . . 0000, 0051, 1756

Teac. . . . . . . . . . . . . . . . . . . . . . . . . 0154

Technics. . . . . . . . . 0054, 0250, 0051

Technovox. . . . . . . . . . . . . . . . . . . 0030

Techwood . . . . . . . 0250, 0051, 0060

Teknika . . . .0054, 0463, 0180, 0150,

. . . . . . . . . . . . . . . . . . 0060, 0178, 0092

Telecolor. . . . . . . . . . . . . . . . . . . . . 0017

Telefunken. . . . . . . . . . . . . . . . . . . 0702

Thomas . . . . . . . . . . . . . . . 0047, 0178

Thomson . . . . . . . . . . . . . . 1447, 0047

TMK . . . . . . . . . . . . . 0236, 0180, 0178

Echo Trimmer PAS 260 User Manual
Electro Voice Portable Speaker FM 1502 User Manual
Eureka Vacuum Cleaner 2969 User Manual
Fisher Price Baby Accessories P7866 User Manual
Fisher Price Baby Toy H4159 User Manual
Frigidaire Air Conditioner FGHD2472PF User Manual
Frigidaire Cooktop FGEC3065K User Manual
Fundex Games Games El Chavo Dominoes User Manual
GBC Laminator ORCA IV User Manual
Global Machinery Company Power Hammer DEC004DC User Manual