4. To change the dialing mode, press the 5or 6button. The display will
alternate between the two dialing modes.
5. Press the options button to store the dialing mode and return to the T/P
DIAL MODE display.
Connecting the Telephone Line
Caller ID Display Messages
Hearing Aid Compatibility (HAC)
Memory
Model 29267 Trimline
Memory Phone
User’s Guide
1. Plug the coiled cord into the jack on the handset.
2. Plug the long straight line cord into a modular wall telephone jack.
3. Set the RINGER switch on the base to HI.
The following special messages indicate the status of a message or the unit:
This telephone system meets FCC standards for Hearing Aid Compatibility.
Before you store a telephone number in memory, make sure the dialing
mode is correctly set for the type of service you have. The default dialing
mode is tone (touch-tone), so if you have pulse (rotary) service, you must first
change the dialing mode. See “To Set the Dial Mode.”
NO CALLS
The caller memory is empty.
Licensing
UNKNOWN CALLER Indicates incoming call is from an area not serviced by
Licensed under US Patent 6,427,009.
Exit Setup
NAME/NUMBER
CID or the CID information was not sent.
= HI - Sound will be loudest.
= LOW - Sound will be lower.
= OFF - Telephone will not ring.
4. Place the handset in the cradle.
NOTE: The unit is properly installed if you pick up the handset
and hear the dial tone. Otherwise, recheck all the installation
steps.
To exit the setup mode, select the EXIT SETUP menu and press the options
Battery power level is low. Please replace the batteries as soon
as possible in order to maintain Caller ID operation.
Storing Frequently Called Numbers
1. Pick up the handset.
2. Press the store button.
3. Push the desired memory location button. (0-9)
4. Press the store button.
5. Use the handset number keys to enter the telephone number (up to 16-
digits) and press the store button.
6. Hang up the handset.
NOTE: If you make a mistake, use the delete button to delete
wrong digits.
CAUTION:
button.
RISKOFELECTRICSHOCK
DONOTOPEN
REMINDER: The time and date is programmed automatically
when the first Caller ID record is successfully received after
the unit is setup.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
BLOCKED CALL
The incoming caller is registered as “Private Number” and Caller
ID information is withheld.
THE LIGHTNING
CAUTION: TO REDUCE THE
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO
HEAD WITHIN THE NOT REMOVE COVER (OR
WARNING:TO
WARNING SIGN
ALERTING YOU OF
IMPORTANT
PREVENT FIRE OR
ELECTRICAL SHOCK
HAZARD, DO NOT
EXPOSETHIS
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
START/END
You are at the beginning or the end of the Caller ID
memory log.
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT.
Telephone Basics
CALL WAITING
If you subscribe to Call Waiting Caller ID Service, this icon
flashes when you receive a call while you are on the phone.
PRODUCT TO RAIN
OR MOISTURE.
Adjusting the Volume
Wall Mount Installation
SEE MARKING ON BOTTOM / BACK OF PRODUCT
You may control the listening level with the VOLUME switch, which has three
levels.
Your telephone may also be mounted on a wall plate (not included).
Troubleshooting Tips
NOTE: To prevent the handset from falling out of the cradle
while the phone is hanging on the wall, you must reverse the
handset hook (located on the base).
1. Push the handset hook up and out with your
thumb, turn it over, and replace it in the slot on
the base.
2. Feed the line cord through the groove and
wrap the cord around the track on the bottom
of the base.
3. Feed the line cord through the groove on the
opposite side of the track, and plug the end
into the modular telephone jack.
Introduction
It remains at the last level set until you change it.
No dial tone.
Changing a Stored Number
Your telephone is designed to give you flexibility in use and high quality
performance. To get the most from your new telephone, we suggest that you
take a few minutes right now to read through this instruction manual.
• Check all cabling to make sure that all connections are secure and not damaged.
• Check the hook switch: Does it fully extend when handset is lifted from cradle?
No display
• Replace batteries.
• Make sure the batteries are properly installed.
No information is shown after the phone rings
• In order to receive Caller ID records, you must subscribe to the standard name and
number Caller ID service available through your local telephone company.
• Be sure to wait until the second ring before answering.
Phone does not ring
Redialing a Number
Repeat the storage sequence above. The new number replaces the old
number at the memory location.
If you want to call the last number you dialed again (up to 32 digits), use the
redial feature.
CAUTION: When using telephone equipment, there are
basic safety instructions that should always be followed.
Refer to the IMPORTANT SAFETY INSTRUCTIONS provided
with this product and save them for future reference.
1. Pick up the handset.
2. Press the redial button.
3. The last number called is automatically redialed.
Erasing a Stored Number
1. Pick up the handset.
2. Press the store button.
3. Press the memory location (0-9) to be erased.
4. Press delete for three seconds until the number in the display is erased.
5. Hang up the handset.
Using One Touch Redial
Before You Begin
If the last call you dialed was busy, you can redial it immediately by just
pressing the redial button and without hanging up the handset.
Parts Checklist
•
Make sure ringer switch is set to HI.
Dialing Frequently Called Numbers
1. Pick up the handset and press the mem button.
2. Press 0-9 for the memory location. The number dials automatically.
OR
1. Pick up the handset and press the dial button.
2. Press the 5or 6buttons for the desired memory location.
3. Press the dial button to dial the number.
OR
Make sure your package includes the following items:
4. Slip the mounting holes (on the bottom of the
base) over the wall plate posts and firmly slide
the unit down into place.
Caller ID (CID)
• You may have too many extension phones on your line. Unplug some extension
phones.
• Check for a dial tone. If there is no dial tone see solutions for “No dial tone.”
Other party cannot hear you
IMPORTANT: In order to use this unit’s Caller ID features, you
must subscribe to either the standard Name/Number Caller
ID Service or Call Waiting Caller ID Service. To know who is
calling while you are on the phone, you must subscribe to Call
Waiting Caller ID Service.
Equipment Approval Information
Your telephone equipment is approved for connection to the Public Switched
Telephone Network and is in compliance with parts 15 and 68, FCC Rules and
Regulations and the Technical Requirements for Telephone Terminal Equipment
published by ACTA.
Setting Up the Caller ID Menu
IMPORTANT: Do not plug the telephone into the wall jack
while setting up the Caller ID menu because an incoming call
may invalidate the information not yet saved.
1. Press the options button. SET 5OR 6appears in the display.
2. Press either REVIEW up or down button to scroll among the 7 menu
screens, which are:
• Make sure phone cord is securely plugged in.
abc
jkl
def
• Make sure extension phones are on the hook at the same time you’re using the
phone. It is normal for the volume to drop when additional extension phones are
used at the same time.
1
2
5
8
3
6
ghi
mno
wx
9yz
#
4
This unit receives and displays information transmitted by your local phone
company. This information can include the phone number, date, and time; or
the name, phone number, date, and time.
1
Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among other information, the US number
and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this
information to your telephone company.
pq
7rs
tuv
tone
oper
0
*
Cannot dial out
store
mem
redial
1. Press dial button while the handset is still in the cradle.
2. Press the 5or 6buttons for the desired memory location, lift the handset
and the number dials automatically.
flash
• Make sure the T/P dialing mode is set to the type of phone service you are
subscribed to.
New calls
Current time
Current date
The REN is useful in determining the number of devices you may connect to your
telephone line and still have all of these devices ring when your telephone number
is called. In most (but not all) areas, the sum of the RENs of all devices connected
to one line should not exceed 5. To be certain of the number of devices you may
connect to your line as determined by the REN, you should contact your local
telephone company.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
• SET 5OR 6
Service
Reviewing Numbers Stored in Memory
• Local Area Code (default - - -)
• Regional AC’s-1 (default - - - - - - - - -)
• CID LANGUAGE (default English)
• SELECT CONTRAST (default 3)
• T/P DIAL MODE (default tone)
• EXIT SETUP
NOTE: You may press dial anytime to exit the Caller ID Set Up
menu. If no buttons are pressed within 10 seconds, the phone
automatically exists the Caller ID Set Up menu and displays
NO CALLS.
If trouble is experienced with this equipment, for repair or warranty information, please
contact customer service at 1-800-448-0329. If the equipment is causing harm to the
telephone network, the telephone company may request that you disconnect the equipment
until the problem is resolved.
1. Press the mem button.
Handset
Base
2. Press 0-9 for the memory location. The number shows on the display.
Wall plate
Copy Caller ID Memory to User Memory
Telephone Jack Requirements
This product may be serviced only by the manufacturer or its authorized service agents.
Changes or modifications not expressly approved by Thomson Inc. could void the user’s
authority to operate this product. For instructions on how to obtain service, refer to the
warranty included in this guide or call customer service at 1-800-448-0329.
1. Pickup the handset.
To use this phone, you need an RJ11C type modular
telephone jack, which might look like the one pictured
here, installed in your home. If you don’t have a
modular jack, call your local phone company to find out
how to get one installed.
2. Press the 5or 6buttons to display the number you want to copy.
3. Press the store button.
4. Press 0-9 for the memory location. The display flashes if the memory
location is occupied.
5. Press the store button twice to replace the new information with the old,
or press the 5or 6buttons to select an empty location. The number is
automatically stored.
Modular
telephone
line jack
Or refer inquiries to:
Notes
Thomson Inc.
Manager, Consumer Relations
PO Box 1976
Caller ID number
• This equipment may not be used on coin service provided by the telephone
company.
• Party lines are subject to state tariffs, and therefore, you may not be able to use
your own telephone equipment if you are on a party line. Check with your local
telephone company.
• Notice must be given to the telephone company upon permanent disconnection of
your telephone from your line.
• If your home has specially wired alarm equipment connected to the telephone line,
ensure the installation of this product does not disable your alarm equipment. If you
have questions about what will disable alarm equipment, consult your telephone
company or a qualified installer.
Caller ID name
Important Installation Information
Receiving CID Records
Local Area Code
• Never install telephone wiring during a lightning storm.
Indianapolis, IN 46206
When you receive a call, the Caller ID information is transmitted between the
first and second ring. The Caller ID information appears on the display while
the phone rings, giving you a chance to monitor the information and decide
whether or not to answer the call.
The telephone uses the programmed area code to determine the number
format to display when a valid Caller ID signal is received. It is also used for
the Dialback feature.
Attach your sales receipt to the booklet for future reference or jot down the date this
product was purchased or received as a gift. This information will be valuable if service
should be required during the warranty period.
Purchase date ____________________________________________
Name of store _______________________________________________
• Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone such as
faxes, other phones, or modems.
6. Press the flash button or hook switch to exit.
NOTE: It is important that you format CID records correctly
BEFORE storing in internal memory as you cannot reformat
CID records stored in memory.
1. Press the options button. SET 5OR 6appears in the display.
2. Press the 5button until LOCAL AREA CODE:_ _ _ appears in the display.
3. To enter or change the area code, press the options button. The display
shows the area code stored in memory. The left-most digit, or a minus
sign (-) flashes, indicating the unit is ready to accept the area code entry.
4. Use the touch-tone pad to enter your 3-digit area code.
NOTE: If you make a mistake, you can simply repeat the
previous steps until your area code is set.
5. Press options to store the area code and return to the LOCAL AREA CODE
display.
Storing CID Records (In CID Memory)
Copy Redial Memory to User Memory
If you are not at home or cannot answer, your telephone’s Caller ID memory
stores the data for the 50 most recent calls you received so you can see who
called while you were unavailable. When the 51st call is received, the oldest
Caller ID record (1st call) is automatically deleted.
Limited Warranty
1. Pickup the handset.
What your warranty covers:
US Number is located on the cabinet bottom.
REN Number is located on the cabinet bottom.
• Defects in materials or workmanship.
For how long after your purchase:
• One year, from date of purchase.
(The warranty period for rental units begins with the first rental or 45 days from date of
shipment to the rental firm, whichever comes first.)
2. Press store.
Handset Layout
3. Press 0-9 for the memory location. The display flashes if the memory
location is occupied. Press the 5or 6buttons to select a different
location. The display flashes if the memory location is occupied.
4. Press the store button again to confirm.
5. Press the redial button, and then press the store button again.
6. Press the flash button or the hook switch to exit.
2
Rights of the Telephone Company
You may review the stored information at any time. Calls received since your
last review show as NEW in the display. .
Should your equipment cause trouble on your line which may harm the telephone
network, the telephone company shall, where practicable, notify you that
temporary discontinuance of service may be required. Where prior notice is not
practicable and the circumstances warrant such action, the telephone company
may temporarily discontinue service immediately. In case of such temporary
discontinuance, the telephone company must: (1) promptly notify you of such
temporary discontinuance; (2) afford you the opportunity to correct the situation;
and (3) inform you of your right to bring a complaint to the Commission pursuant to
procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.
The telephone company may make changes in its communications facilities,
equipment, operations or procedures where such action is required in the
operation of its business and not inconsistent with FCC Rules and Regulations. If
these changes are expected to affect the use or performance of your telephone
equipment, the telephone company must give you adequate notice, in writing, to
allow you to maintain uninterrupted service.
Reviewing CID Records
What we will do:
volume
switch
• Press either the 5or 6 down button to view the newest call record.
• Provide you with a new or, at our option, a refurbished unit. The exchange unit is under
warranty for the remainder of the original product’s warranty period.
How you get service:
• Properly pack your unit. Include any cables, etc., which were originally provided with the
product. We recommend using the original carton and packing materials.
• ”Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that
the product is within the warranty period, must be presented to obtain warranty service.”
For rental firms, proof of first rental is also required. Also print your name and address
and a description of the defect. Send via standard UPS or its equivalent to:
• Press the 6button to scroll through the call records from the most
recent to the oldest.
• Press the 5button to scroll through the call records from the oldest to
the newest.
• When all of the messages have been viewed, START/END appears in the
display.
Regional Area Codes for 10-Digit Dialing
dial
(button)
Storing a Pause in Memory
Like the Local Area Code, the telephone uses the programmed area codes
to determine the number format to display when a valid Caller ID signal
is received. Calls that match any of the programmed regional area codes
are displayed as 10 digits. This is helpful in areas that have multiple or
overlapping area codes and require 10-digit dialing.
display
The redial button has dual functionality. It becomes a pause button if the
store button is pressed first. It is valid only when storing a number into
memory. Use the redial button to insert a pause when a delay is needed
in an automatic dialing sequence. For example, when you must dial a 9 to
get an outside line, or when you enter codes to access your long distance
company.
abc
jkl
def
1
2
5
8
3
6
ghi
mno
wx
9yz
#
4
+
pq
7rs
tuv
o
p
options
(button)
e
t
dial
-
o
delete
n
e
tone
oper
s
0
d
*
1. Press the options button. SET 5OR 6appears in the display.
2. Press the 5button until REGIONAL AC’S-1: _ _ _ _ _ _ _ _ _ shows in the
display.
3. To enter or change the area code, press the options button. The display
shows the area code stored in memory. The left-most digit, or minus sign
(-), flashes, indicating the unit is ready to accept the area code entry.
Deleting CID Records
(button)
store
Thomson Inc.
11721 B Alameda Ave.
Socorro, Texas 79927
store
mem
redial
• To delete the record showing in the display, press the delete button once.
(button)
flash
You may need to adjust the length of the pause. It can be adjusted from 1 to
9 seconds. The default setting is 4 seconds.
1. Pickup the handset.
2. Press the store button.
3. Press the redial button.
4. Press 1-9 (1 = 1 second, 2 = 2 seconds, etc.)
5. Press store again.
6. Press the flash button or the hook switch to exit.
redial
(button)
• To delete all records while reviewing, press and hold the delete button
until ERASE ALL? shows in the display then press the delete button again
to confirm.
• Pay any charges billed to you by the Exchange Center for service not covered by the
warranty.
• Insure your shipment for loss or damage. Thomson Inc. accepts no liability in case of
damage or loss.
• A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding operating
instructions and user controls. Any additional information, should be obtained from your
dealer.)
• Installation and setup service adjustments.
• Batteries.
Interference Information
mem
(memory
button)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference; and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
flash
(button)
5
/6
Dialing Back
arrow
4. Use the touch-tone pad to enter your 3-digit area code.
When reviewing Caller ID records, you may dialback the phone numbers
shown on the display by pressing the dial button.
(buttons)
5. Press the options button again to enter the next three-digit regional
area code and repeat step 4 until all the REGIONAL AC’S-1 (RAC#1) and
REGIONAL AC’S-2 (RAC#1) are entered. A total of 6 sets of Regional Area
Codes may be entered.
6. Press the options button to store the setting and return to the REGIONAL
AREA CODE display.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
Installing the Phone
Installing the Batteries
If you programmed your local area code in the setup menu
1. Use the 5and 6buttons to scroll to the number you want to dial.
• If you see a number with 7 digits (i.e. 555-1234), then the call was
received from within your area code. However, this does not guarantee
the call is a local call.
• If you see a number with 11 digits (i.e. 1-234-555-1234), then the call
received was not from your area code.
2. Press the dial button and the display shows PICKUP or ADJ. A 10 second
timer also starts in the upper right side of the display, letting you know
the time remaining until the unit returns to the display. If you adjust the
number to be dialed, the timer automatically resets itself.
3. To adjust the phone number, press the dial button. For instance, a 7-digit
local number sometimes cannot be dialed because it requires a 10-digit
or 11-digit format. Press the dial button repeatedly to scroll through the 7,
10, and 11-digit numbers.
Chain Dialing
IMPORTANT: You will have approximately 60 seconds to
replace the batteries before the memories stored in the
handset are lost. Please read the instructions before
replacing the batteries and have the batteries ready to be
inserted beforehand. As a precaution, you may want to write
down any stored information you do not want erased.
Privacy of Communications may not be ensured when using this product.
This process allows you to dial a succession of stored numbers from
separate memory locations. This is useful when you must dial several
sequences of numbers, such as with frequent calls via a telephone company
long distance provider.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or
television that is “receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications
equipment and receiving antenna.
7. Press dial to exit.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
CID Language
This setting allows you to display Caller ID display prompt messages in
English, French or Spanish.
For example
Memory location
Your Caller ID phone uses 4 AA-size alkaline batteries for receiving and
storing Caller ID records and for the numbers you use for memory dialing.
1. If the telephone line cord is connected, disconnect it from the wall.
2. Use a ballpoint pen or other tool to open the battery compartment door.
Local access number of long distance company
Authorization code (ID)
6
7
8
Product Registration:
1. Press the options button. SET 5OR 6appears in the display.
2. Press the 5button until CID LANGUAGE appears in the display.
3. Press the options button to show the current language setting. The default
is English.
4. Press the 5or 6button to change the language.
5. Press options to store the language and return to the CID LANGUAGE
display.
• Please complete and mail the Product Registration Card packed with your unit. It will
make it easier to contact you should it ever be necessary. The return of the card is not
required for warranty coverage.
Long distance phone number
1. Pick up the handset.
Limitation of Warranty:
• The warranty stated above is the only warranty applicable to this product. All other
warranties, express or implied (including all implied warranties of merchantability or
fitness for a particular purpose) are hereby disclaimed. No verbal or written information
given by Thomson Inc., its agents, or employees shall create a guaranty or in any way
increase the scope of this warranty.
• Repair or replacement as provided under this warranty is the exclusive remedy of the
consumer. Thomson Inc. shall not be liable for incidental or consequential damages
resulting from the use of this product or arising out of any breach of any express or
implied warranty on this product. This disclaimer of warranties and limited warranty
are governed by the laws of the state of Indiana. Except to the extent prohibited by
applicable law, any implied warranty of merchantability or fitness for a particular purpose
on this product is limited to the applicable warranty period set forth above.
2. Press mem button, then press number “6” for the memory location.
3. When you hear the access tone, press the mem button, and then press “7”.
4. At the next access tone, press the mem button and then “8”.
5. The number dials automatically.
• Connect the telecommunications equipment into an outlet on a circuit different
from that to which the receiving antenna is connected.
Battery compartment
If these measures do not eliminate the interference, please consult your dealer or an
experienced radio/television technician for additional suggestions. Also, the Federal
Communications Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C. 20402. Please specify stock number
004-000-00345-4 when ordering copies.
7-digits:
7-digit telephone number (i.e. 555-5555)
10-digits:
3-digit area code + 7-digit telephone number (i.e.
425-555-5555)
Select Contrast
Using Flash
This adjustment allows you to adjust the contrast of the display.
1. Press the options button until SET 5OR 6appears.
2. Press the 5button until SELECT CONTRAST appears in the display.
11-digits:
long distance code 1 + 3-digit area code + 7-digit
telephone number (i.e. 1-425-555-5555)
This feature is used to activate customer calling services available through
your local phone company, such as Call Waiting. These services generally
require an extra monthly fee. If you subscribe to any of these services, please
refer to the phone company’s instructions on how to use flash.
4. To dial the displayed number, pick up the handset before the timer
reaches 0. NOW DIALING shows in the display and the number is dialed.
If you did not program your local area code in the setup menu
1. Use the 5and 6buttons to display the number you want to dial. You will
only see 10-digit numbers (i.e. 234-555-1234).
Notice: The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
3. Press the options button to show the current contrast setting. There are 5
levels of contrast, with the default set to 3.
4. To decrease the contrast, press 6. To increase the contrast,
press 5.
5. Press the options button to store the contrast setting and return to the
SELECT CONTRAST display.
To answer an incoming call while having a conversation:
• After you hear the Call Waiting tone, press and release the flash button.
The first call is placed on hold while the second call can be answered.
To return to your first call and put the second call on hold:
• Press and release the flash button again. The first call can continue while
the second call is put on hold.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts so the above limitations or
exclusions may not apply to you.
• This warranty gives you specific legal rights, and you also may have other rights that vary
from state to state.
If you purchased your product outside the USA:
• This warranty does not apply. Contact your dealer for warranty information.
3. Insert 4 AA-size alkaline batteries (not included) as shown on the diagram
inside the compartment.
4. Replace the battery compartment door.
5. Re-attach the line cord to the wall and check your memory locations. If
installation takes longer than 90 seconds, you may need to re-enter your
memory locations.
IMPORTANT: If you’re not going to use the telephone for more
than 30 days, remove the batteries because they can leak and
damage the unit.
2. See steps 2 through 4 in the above section to complete the dialback
sequence.
T/P Dial Mode
NOTE: IF PICKUP PHONE shows on the display, no other
changes to the number can be made. The information sent
from the telephone company is known to be a valid number to
dial back (available only in limited areas). Once you pickup the
phone, the number is automatically dialed.
This adjustment allows you to select tone (touch-tone) or pulse (rotary)
dialing.
Using Temporary Tone Dialing
If you have pulse service, you can temporarily change from pulse to tone
service. After dialing the telephone number, press and release the *TONE
button on the telephone. This allows access to phone services that require
a tone, such as banking and long-distance services. After you hang up the
handset, the telephone automatically returns to pulse service.
Thomson Inc.
1. Press the options button until SET 5OR 6appears.
2. Press the 5button until T/P DIAL MODE appears in the display.
3. Press the options button to show the current dial mode. The default is set
to tone.
10330 North Meridian St.
Indianapolis, IN 46290-1024
© 2007 Thomson Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)
Model 29267B
16258160 (Rev. 3 Dom E/S)
07-17
Printed in China
|