Safety Instructions . . . . . . . . . . . . 2
Owner’s Manual
Operating Instructions
WNSB8060
WNSB9080
WNSB9100
Clothes Care Cycles . . . . . . . . . . . . .8
Controls . . . . . . . . . . . . . . . . . . . .3, 6
Controls Features . . . . . . . . . . . . . .9
Cycle Options . . . . . . . . . . . . . . . .10
Loading and Using
the Washer . . . . . . . . . . . . . . . .13–14
One Touch Cycles . . . . . . . . . . . .3–7
Other Features . . . . . . . . . . . . . . .11
Washer Features . . . . . . . . . . . . . .12
Troubleshooting Tips . . . . . . .15–18
Consumer Support
Consumer Support . . . . . Back Cover
Warranty . . . . . . . . . . . . . . . . . . . . 19
Write the model and serial
numbers here:
Model # ______________
Serial # ______________
You can find them in the
upper right corner on the
back of your washer.
175D1807P352 49-90090 02-02 JR
Easy ONE TOUCH Cycles.
GEAppliances.com
SafeyIructions
Your new washer offers the convenience of starting your wash loads with our easy ONE TOUCH cycles. Make one simple
selection, and your LOAD SIZE, SOIL LEVEL, WASH/RINSE TEMPERATURE, WASH SPEED and SPIN SPEED are automatically
set. Then all you have to do is press START.
ONE TOUCH
Quick Start Guide
OpeagIructions
• Close lid
• Select wash cycle
• Add clothes
• Push START
• Check load size setting
• Add detergent
• Add diluted fabric
softener (on models
with a fabric softener
dispenser)
Washer control panel for Models WNSB9080 and WNSB9100.
You can locate your model number behind the top edge of the control panel.
Model WNSB9080
T
rubleshotingT
ips
Model WNSB9100
CnsmeSuport
3
ONE TOUCH selections for Models WNSB9080 and WNSB9100.
Throughout this manual, features and appearance may vary from your model.
PRESS...
AUTOMATICALLY SELECTS...
THEN PRESS...
SafeyIructions
For heavy to lightly soiled cottons, household linens,
work and play clothes.
For heavy to lightly soiled cottons, household linens,
work and play clothes.
OpeagIructions
For non-colorfast cottons and blends, and items that
are labeled cold wash by the fabric manufacturer.
ips
For knits, wrinkle-free and permanent press items.
rubleshotingT
T
Changing the automatic settings.
You can change any of the automatic settings simply by pressing the desired pads. The wash/rinse temperature
can be changed by pressing TEMP WASH/RINSE.
CnsmeSuport
4
Special Wash Cycles. (on some models)
GEAppliances.com
SafeyIructions
Special Wash Cycles are customized to provide optimum washing for a variety of fabrics and clothing types.
PRESS...
AUTOMATICALLY SELECTS... THEN PRESS...
OpeagIructions
T
rubleshotingT
OR
ips
OR
CnsmeSuport
Changing the automatic settings.
You can change any of the automatic settings simply by pressing the desired pads. The wash/rinse temperature
can be changed by pressing TEMP WASH/RINSE.
5
Easy ONE TOUCH Cycles.
Your new washer offers the convenience of starting your wash loads with our easy ONE TOUCH cycles. Make one simple
selection, and your LOAD SIZE, SOIL LEVEL, WASH/RINSE TEMPERATURE and WASH/SPIN SPEED are automatically set.
Then all you have to do is press START.
ONE TOUCH
Quick Start Guide
SafeyIructions
• Close lid
• Select wash cycle
• Add clothes
• Push START
• Check load size setting
• Add detergent
• Add diluted fabric
softener (on models
with a fabric softener
dispenser)
OpeagIructions
Washer control panel for Model WNSB8060.
You can locate your model number behind the top edge of the control panel.
ips
rubleshotingT
T
CnsmeSuport
6
ONE TOUCH selections for Model WNSB8060.
GEAppliances.com
SafeyIructions
Throughout this manual, features and appearance may vary from your model.
PRESS... AUTOMATICALLY SELECTS... THEN PRESS...
For heavy to lightly soiled cottons, household linens,
work and play clothes.
OpeagIructions
For heavy to lightly soiled cottons, household linens,
work and play clothes.
For knits, wrinkle-free and permanent press items.
T
rubleshotingT
For lingerie and items labeled hand-washable with
light soils. Provides periods of agitation and soak
during wash and rinse.
ips
For wrinkle-free and permanent press items and knits.
CnsmeSuport
For knits and washable sweaters.
Changing the automatic settings.
You can change any of the automatic settings simply by pressing the desired pads.
7
About the variable speed motor. (on some models)
Models WNSB9080 and WNSB9100 use an advanced variable speed motor to provide you
with superior clothes care and wash cycle flexibility. The use of this motor allows your
washer to agitate more slowly than a conventional washer, and to spin at speeds that
more closely meet the needs of your clothing.
Some wash cycles are pulsed, and will agitate and soak to provide you with better
cleaning and less wear on your clothing. Some spin cycles will start slowly and then
accelerate, allowing more water to be removed from the clothes with less wrinkling.
These functions are a normal part of your new washer.
SafeyIructions
About Clothes Care Cycles.
Throughout this manual, features and appearance may vary from your model.
STAIN WASH (on some models)
For heavily soiled or stained items. Adds an extra agitation and soak at the beginning
of the wash cycle.
OpeagIructions
QUICK RINSE (on some models)
Use this feature to quickly rinse chlorine, perspiration, stains, etc. out of clothes.
■ The washer fills with water, agitates for three minutes, drains and spins. You may
change the automatic settings if desired.
ips
HANG DRY (on some models)
If you air dry your clothes without the aid of a dryer, you may find that the slower final
spin speed of the Hang Dry setting produces fewer wrinkles in your clothing. This may
significantly reduce your ironing chore.
rubleshotingT
T
DRAIN & SPIN
DRAIN & SPIN any cycle at any time.
DRAIN
& SPIN
CnsmeSuport
8
About controls features.
GEAppliances.com
SafeyIructions
Throughout this manual, features and appearance may vary from your model.
START
■ After you have selected a new cycle, press once to start the cycle.
■ Press twice to select the last cycle used and start the washer.
■ If the washer is running, press once to interrupt the cycle; press again to continue
the cycle.
STOP
This pad should not be used to interrupt or pause a cycle.
OpeagIructions
Pressing this pad will cancel the current settings and the settings will be lost.
Estimated Time Remaining
■ Displays the approximate time remaining until the end of the cycle.
E
ST.
TIME REMAINING
■ If the estimated time remaining is more than 60 minutes, “1H” will flash in the
display, followed by the additional remaining minutes. When the time remaining is
less than 60 minutes, the timer will count down.
■ Cycle time is affected by how long it takes the washer to fill. This depends on the
water pressure in your home. The “smart” timer “learns” the amount of time it
takes to fill your washer and adjusts the total time accordingly.
NOTE: If PRESOAK is selected and a follow up wash cycle is not chosen, two dashes
will come up in the display.
T
rubleshotingT
Spot Spray
Provides a short spray of water to allow you to dampen clothing when you pretreat stains.
Open the washer lid.
1
2 Press the SPOT SPRAY button. (You will see a short stream of water.)
Dampen your soiled garment with the SPOT SPRAY option and rub your favorite
3
ips
pretreatment product into soiled area.
NOTE: The SPOT SPRAY option will not work if
■ the washer lid is down
■ the washer tub is filling
■ the water has already reached the level you selected.
CnsmeSuport
BLEACH SIGNAL (on some models)
The Bleach Signal is a reminder signal that can be turned on to remind you to add bleach at
the proper time in the wash cycle. Adding detergent and bleach at the same time reduces the
effectiveness of both the enzymes in the detergent and the chlorine in the bleach. By adding
bleach later in the wash cycle, you allow the detergent’s enzymes to remove dirt and stains first,
and then provide a more effective dose of liquid bleach to whiten and sanitize your clothes.
9
About cycle options.
SIGNAL
Alerts you when the cycle is complete.
On some models, press SIGNAL to turn the beeper on or off.
On some models, press SIGNAL to select low or high volume, or to turn the beeper off.
Appearance may vary.
SafeyIructions
2ND RINSE
Adds a second rinse to any cycle.
EXTEND SPIN
Extends the last spin of a wash cycle. This will extract more water from your clothes.
Clothes will be drier when you use this option.
AUTO SOAK
This option provides the flexibility to add short agitation and a soaking period to the
beginning of any selected wash cycle.
OpeagIructions
ips
rubleshotingT
T
CnsmeSuport
10
About other features.
GEAppliances.com
SafeyIructions
Cycle Status Indicator Lights
The cycle status indicator lights display what part of the cycle the washer is in.
PerfecTemp Plus
PerfecTemp Plus senses the incoming water temperature and adjusts the temperature
of the fill water.
The lid must be closed for PerfecTemp Plus to work.
If your water is too cold, detergent will not dissolve effectively and clothes may not get
clean. If the water is too hot, fabrics could be damaged.
OpeagIructions
PerfecTemp Plus adjusts these water temperature extremes for better washing
performance.
You may hear the water valves turning off and on while the water temperature is being
adjusted. This is normal.
Some models have an indicator light that tells you when PerfecTemp Plus is active.
Auto Balance (on some models)
The Auto Balance feature senses the wash load distribution for an even spin. Models
with Auto Balance have an indicator light that tells you when the feature is active.
T
rubleshotingT
ips
CnsmeSuport
11
About washer features.
Liquid Bleach Dispenser
The dispenser dilutes liquid chlorine bleach before it reaches into your wash load.
1 Check clothing care labels for special instructions.
2 Measure liquid bleach carefully, following instructions on the bottle.
■ Never pour undiluted liquid chlorine bleach directly onto clothes or into the wash basket.
■ Do not pour powdered bleach into bleach dispenser.
SafeyIructions
Before starting the washer, pour measured amount of bleach directly into bleach
dispenser. Avoid splashing or over-filling dispenser. If you prefer to use powdered
bleach, add it into the wash basket with your detergent.
3
■ Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing
can produce a toxic gas which may cause death.
The Agitator Cap or Fabric Softener Dispenser
Add water to dispenser until it reaches
the maximum fill line.
The agitator cap fits into the top of the
agitator. If it accidentally comes off, simply
put it back on.
3
The fabric softener dispenser automatically
releases liquid fabric softener at the proper
time during the cycle.
OpeagIructions
Do not stop the washer during the first spin.
This will cause the dispenser to empty too
soon.
To use, follow these steps:
Do not pour anything into the agitator if
the agitator cap or dispenser is removed.
ips
Make sure dispenser is securely
attached to agitator.
1
Use only liquid fabric softener.
2
Pour into dispenser, using amount
recommended on package.
Never pour fabric softener directly on
clothes. It may stain them.
rubleshotingT
T
▼
▼
Cleaning the Fabric Softener Dispenser
1 Remove the dispenser from the top of the agitator.
Separate the dispenser cup from the cover by grasping the top and pushing down on
the inside of the cup with your fingers. Dispenser cup will pop free from the cover.
2
To clean the dispenser, soak both the dispenser cup and the dispenser cover in the
following solution:
3
■ 1 US gallon (3.8 liters) warm water
■ 1/4 cup (60 ml) heavy duty liquid detergent
■ 1 cup (240 ml) bleach
Separate for cleaning.
If necessary, loosen build-up with a clean, soft cloth after soaking. Do not use a stiff
brush; you may roughen the surface of the dispenser.
4
CnsmeSuport
5 Rinse and reassemble dispenser. Place dispenser back on the agitator.
12
Loading and using the washer.
Always follow fabric manufacturer’s care label when laundering.
GEAppliances.com
SafeyIructions
Sorting Wash Loads
Sort by color (whites, lights, colors), soil level,
fabric type (sturdy cottons, easy care, delicates),
and whether the fabric produces lint (terry cloth,
chenille), or collects lint (velveteen, corduroy).
Proper Use of Detergent
Using too much detergent is a common cause
of laundry problems. Today’s detergents are
formulated to be effective without highly visible
sudsing. Be sure to carefully read and follow
manufacturer’s recommendations for how
much detergent to use in your wash.
You can use less detergent if you have soft water,
a smaller load or a lightly soiled load.
OpeagIructions
Loading the Washer
Load dry items loosely, no higher than the
top row of holes in the washer basket.
When loading wet items make sure you set
the load/water level high enough to allow
the items to move freely. Water level should
just cover the clothes. To add items after
washer has started, lift the lid and submerge
additional items next to the agitator.
■ Do not wrap long items like sheets or pants
around the agitator.
■ Do not wash fabrics containing flammable
materials (waxes, cleaning fluids, etc.).
T
rubleshotingT
■ Agitation will not start with the lid up.
ips
CnsmeSuport
13
Loading and using the washer.
Always follow fabric manufacturer’s care label when laundering.
Care and Cleaning of the Washer
Wash Basket: Leave the lid open after washing to
allow moisture to evaporate. If you want to clean
the basket, use a clean soft cloth dampened with
liquid detergent, then rinse. (Do not use harsh
or gritty cleaners.)
Moving and Storage: Ask the service technician to
remove water from drain pump and hoses. See the
Installation Instructions packed with product for
information on how to reinstall the shipping rod to
keep the tub stationary when moving the washer.
For more information, visit GEAppliances.com, or
call 800.GE.CARES (800.432.2737). Do not store
the washer where it will be exposed to the weather.
SafeyIructions
Fill Hoses: Hoses connecting washer to faucet
should be replaced every 5 years.
Lint Filter: The lint filter is located under the agitator.
Long Vacations: Be sure water supply is shut off at
faucets. Drain all water from hoses if weather will
be below freezing.
It is self-cleaning and requires no maintenance.
Exterior: Immediately wipe off any spills. Wipe with
damp cloth. Try not to hit surface with sharp objects.
Fabric Care Labels
Below are fabric care label “symbols” that affect the clothing you will be laundering.
WASH LABELS
OpeagIructions
Machine
wash
cycle
Normal
Permanent Press/
wrinkle resistant
Do not wash
Do not wring
Gentle/
delicate
Hand wash
Water
temperature
Hot
(50°C/120°F)
Warm
(40°C/105°F)
Cold/cool
(30°C/85°F)
ips
DRY LABELS
Tumble
dry
Do not dry
(used with
do not wash)
Dry
T
Normal
Permanent Press/
wrinkle resistant
Gentle/
delicate
Do not tumble dry
T
Heat
setting
High
Medium
Low
No heat/air
Special
instructions
Dry flat
Line dry/
hang to dry
In the shade
Drip dry
BLEACH LABELS
Bleach
symbols
CnsmeSuport
Any bleach
(when needed)
Do not bleach
Only non-chlorine bleach
(when needed)
14
Before you call for service…
GEAppliances.com
SafeyIructions
Troubleshooting Tips
Save time and money! Review the charts on the following pages,
or visit GEAppliances.com. You may not need to call for service.
PERFECTEMP PLUS
Possible Causes
What To Do
PerfecTemp Plus wash
temperature is incorrect
• This is normal. The PerfecTemp Plus feature is designed
not to activate during a cold rinse cycle to improve the
energy efficiency of your washer.
(Review PerfecTemp
Plus in the About other
features section)
• Wait until the water in the water heater is heated to the
correct temperature.
OpeagIructions
PERFORMANCE
Clothes too wet
Possible Causes
What To Do
• Make sure the spin cycle selected matches the load you
are washing. Some fabrics will feel wetter when rinsed
with cold water.
Colored spots
• Check fabric softener package for instructions and follow
directions for using dispenser.
• Pretreat stain and rewash.
• Sort whites or lightly colored items from dark colors.
Grayed or yellowed
clothes
• Use more detergent (especially with larger loads).
Be sure to follow detergent manufacturer’s directions.
• Use a water conditioner like Calgon brand or install
a water softener.
T
rubleshotingT
• Make sure water heater is delivering water at
120°F–140°F (48°C–60°C).
• Select load size to match clothes load.
• Add detergent as wash basket fills with water before
you load clothes.
• Sort clothes by color. If fabric label states wash separately,
unstable dyes may be indicated.
ips
Lint or residue on
clothes
• If you do not dry your clothes with a clothes dryer, your
clothes may retain more lint.
• Separate lint producers from lint collectors.
• Wash small loads for a shorter time than larger loads.
• Add detergent as wash basket fills with water, before you
load clothes.
CnsmeSuport
• Try a liquid detergent.
• Use warmer water temperature.
• Load clothes no higher than the top row of holes in the
washer tub.
• Make sure load size selected matches clothes load size.
• Check fabric softener package for instructions and follow
directions for using dispenser.
15
Before you call for service…
PERFORMANCE (cont.)
Pilling
Possible Causes
What To Do
• While this is not caused by the washer, you can slow the
pilling process by washing garments inside out.
Snags, holes, tears, rips
or excessive wear
• Fasten snaps, hooks, buttons and zippers.
• Remove loose items like pins, objects in pockets
and sharp buttons.
SafeyIructions
• Turn knits (which snag easily) inside out.
• Check bleach package instructions for proper amount.
• Never add undiluted bleach to wash or allow clothes
to come in contact with undiluted bleach.
• Rinse items that may have chemicals on them before
washing.
Wrinkling
• Avoid mixing heavy items (like work clothes) with
light items (like blouses).
• Try a fabric softener.
• Load your washer so clothes have enough room
to move freely.
OpeagIructions
• Match Cycle selection to the type of fabric you are
washing (especially for easy care loads).
• Wash in warm or cold water.
ips
OPERATION
Possible Causes
HAND WASH CASUALS
What To Do
Washer pauses in cycle
• This is normal. The washer alternates between agitate
and soak during the HAND WASH and CASUALS cycles
to get your clothes cleaner with less wear.
Washer won’t operate
• Make sure cord is plugged securely into a working outlet.
• Turn both hot and cold faucets fully on.
• Check controls.
rubleshotingT
T
• Close lid and reset cycle, to the beginning if necessary.
• Check house circuit breakers/fuses. Replace fuses or
reset breaker. Washer should have separate outlet.
• Unplug washer, wait 2 minutes, plug back in, and press
START.
• Press START.
• Press START again.
CnsmeSuport
16
GEAppliances.com
SafeyIructions
WATER
Too many suds
Possible Causes
What To Do
• Switch to a lower sudsing detergent brand and follow
instructions on package.
• Try less detergent.
• Measure your detergent carefully. Use less soap if you
have soft water, a smaller load or a lightly soiled load.
Water leaks
• Make sure hose connections are tight at faucets
and at washer.
• Make sure end of drain hose is properly connected
to washer and correctly inserted in and secured to
drain facility.
OpeagIructions
• Check household plumbing. You may need to call a
plumber.
• Tighten hoses at the faucets and turn the water off after
each use.
• Check condition of the fill hoses; they should be
replaced every 5 years.
• Use less detergent. Use less soap if you have soft water,
a smaller load or a lightly soiled load.
Water temperature
is incorrect
• Check water temperature control and adjust.
• Turn both hot and cold faucets fully on and make sure
hoses are connected to correct faucets.
•
Turn off the water source and disconnect water fill
hoses from the upper back of the washer. Use a brush or
toothpick to clean the screens in the machine. Reconnect
the hoses and turn the water back on.
T
rubleshotingT
• Make sure house water heater is delivering water
at 120°F–140°F (48°C–60°C).
PerfecTemp Plus
• The lid must be closed for PerfecTemp Plus to work.
• Reset cycle.
Water pumped out
before cycle is
complete
ips
Water won’t drain
• Straighten drain hose and make sure washer is not sitting
on it.
• Top of drain outlet should be less than 8 ft (2.5 m)
above floor.
Water spraying during
spin cycle
• Spray rinse during a spin cycle is normal.
CnsmeSuport
Washer did not fill
to chosen level
(PerfecTemp Plus
and START lights
are flashing)
• Press the START button again.
• Straighten hoses.
•
Turn off the water source and disconnect water fill
hoses from the upper back of the washer. Use a brush or
toothpick to clean the screens in the machine. Reconnect
the hoses and turn the water back on.
Water fills and drains
at the same time
• Drain stand pipe must be above 30″ (76.2 cm).
17
Before you call for service…
NOISE
Washer is noisy
Possible Causes
What To Do
• To level the front of the washer, adjust the front leveling
legs by rotating the individual leg in the proper direction
for up or down. To level back of washer, lift back of
machine 4″ (11 cm) and set down.
• Press START to pause the washer, open the lid and
redistribute the load evenly. Close the lid and press
START again.
SafeyIructions
• To remove shipping rod from washer, pull yellow tag and
attached rod from the bottom right hand side of washer.
• Pull washer away from the wall; about 4″ (11 cm)
is needed.
PerfecTemp Plus
Possible Causes
• This is normal. PerfecTemp Plus turns water valves off
and on to adjust water temperature.
OTHER
What To Do
Labels on the exterior
of the washer will not
peel off cleanly
• Use a hair dryer set at the lowest heat setting, directing
the air at the label for a short amount of time. This will
release the adhesive easily, without damaging the surface
of the washer.
OpeagIructions
ips
rubleshotingT
T
CnsmeSuport
18
GE Washer Warranty.
SafeyIructions
All warranty service provided by our Factory Service Centers,
Staple your receipt here.
Proof of the original purchase
date is needed to obtain service
under the warranty.
or an authorized Customer Care® technician. To schedule service,
on-line, 24 hours a day, visit us at GEAppliances.com, or call
800.GE.CARES (800.432.2737).
For The Period Of: We Will Replace:
One Year
From the date of the
original purchase
Any part of the washer which fails due to a defect in materials or workmanship. During this
full one-year warranty, GE will also provide, free of charge, all labor and related service costs
to replace the defective part.
Second Year
From the date of the
original purchase
Any part of the washer which fails due to a defect in materials or workmanship. During this
additional one-year limited warranty, you will be responsible for any labor or related service costs.
OpeagIructions
Third through
The suspension rod and spring assembly, and main electronic control board, if any of these parts
should fail due to a defect in materials or workmanship. GE will also replace the washer lid or
cover, if they should rust under operating conditions. During this additional three-year limited
warranty, you will be responsible for any labor or related service costs.
Fifth Year
From the date of the
original purchase
Third through
The transmission and outer washer tub, if any of these parts should fail due to a defect in materials
or workmanship. During this additional eight-year limited warranty, you will be responsible for any
labor or related service costs.
Tenth Year
From the date of the
original purchase
Lifetime of Product
From the date of the
original purchase
The washer basket, if it should fail due to a defect in materials or workmanship. During this
product lifetime limited warranty, you will be responsible for any labor or related service costs.
What Is Not Covered:
T
■
■
■
■
rubleshotingT
■
■
This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. In Alaska, the
warranty excludes the cost of shipping or service calls to your home.
ips
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. To know what your legal rights are, consult your local or state consumer affairs office or
your state’s Attorney General.
Warrantor: General Electric Company. Louisville, KY 40225
CnsmeSuport
19
Consumer Support.
GE Appliances Website
GEAppliances.com
Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day,
any day of the year! For greater convenience and faster service, you can now download Owner’s Manuals,
order parts, catalogs, or even schedule service on-line. You can also “Ask Our Team of Experts™”
your questions, and so much more...
Schedule Service
GEAppliances.com
Expert GE repair service is only one step away from your door. Get on-line and schedule your service at
your convenience 24 hours any day of the year! Or call 800.GE.CARES (800.432.2737) during normal
business hours.
Real Life Design Studio
GEAppliances.com
GE supports the Universal Design concept–products, services and environments that can be used by
people of all ages, sizes and capabilities. We recognize the need to design for a wide range of physical and
mental abilities and impairments. For details of GE’s Universal Design applications, including kitchen
design ideas for people with disabilities, check out our Website today. For the hearing impaired, please call
800.TDD.GEAC (800.833.4322).
Extended Warranties
GEAppliances.com
Purchase a GE extended warranty and learn about special discounts that are available while your warranty
is still in effect. You can purchase it on-line anytime, or call 800.626.2224 during normal business hours.
GE Consumer Home Services will still be there after your warranty expires.
Parts and Accessories
GEAppliances.com
Individuals qualified to service their own appliances can have parts or accessories sent directly to their
homes (VISA, MasterCard and Discover cards are accepted). Order on-line today, 24 hours every day or
by phone at 800.626.2002 during normal business hours.
Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally
should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause
unsafe operation.
Contact Us
GEAppliances.com
If you are not satisfied with the service you receive from GE, contact us on our Website with all the details
including your phone number, or write to: General Manager, Customer Relations
GE Appliances, Appliance Park
Louisville, KY 40225
Register Your Appliance
GEAppliances.com
Timely product registration will allow for
enhanced communication and prompt service under the terms of your warranty, should the need arise.
You may also mail in the pre-printed registration card included in the packing material.
Printed in the United States
|