5.1ch Decoder/AV Matrix Unit
MODEL
INSTALLATION MANUAL
Be sure to read this installation manual thoroughly prior to installation and making connections. If
installation methods or non-standard parts not specified in this installation manual are used, accidents
or injury may result.
Professional installation is recommended, contact the place of purchase to schedule an appointment.
After reading the owner's manual and the installation manual thoroughly, keep them in a safe place for
future reference.
To dealers:
Give this installation manual to the customer after installation and all connections have been
completed.
Contents
Components
2
3
Before
installation
For your safety in using the DCU105
Names and functions of terminals
Speaker connection examples
5
8
Connections
Installation
9
Installing the decorder unit
10
When measuring frequency response characteristics or carrying out automatic time alignment inside the vehicle
For your safety in using the DCU105
Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the DCU105.
They show safe and correct ways to handle the product to prevent personal injury to you and others and
avoid damage to property.
When reading through the manual, take the time to read through and learn the important information listed in
this section.
This "WARNING" sign indicates a situation in which incorrect handling may
result in death or serious personal injury.
This "CAUTION" sign indicates a situation in which incorrect handling may result in
personal injury or may result solely in damage to property.
This section contains information that can help to prevent problems and
Tip
damage to the unit, and also contain other useful information.
•
•
•
•
Do not install this product in locations where it may
obstruct the driver's view, or where it may endanger
passengers in the vehicle. Otherwise, an accident or
injury may result.
Never supply power to another electrical appliance
by splicing or tapping into this product's power lead
(battery supply or constant power wire). Otherwise,
the current capacity of the wire will be exceeded,
resulting in a fire or electric shock.
Do not install this product in locations where it may
interfere with the operation of the steering wheel,
shift lever, brake pedal, etc. Otherwise, an accident
or injury may result.
•
•
•
Never attempt to disassemble or modify the product.
Otherwise, an accident, fire or electric shock may
result.
To prevent damage to the vehicle, confirm the
locations of hoses, electrical wiring, and the fuel tank
prior to drilling holes to install this product. Also, take
all necessary precautions so that the product does
not interfere, nor come in contact with them.
Otherwise, a fire may result.
When replacing fuses, be sure to use fuses of the
specified capacity (amperage). Otherwise, damage
to the unit, fire, or an electric shock may result.
When installing the product into a vehicle with a
passenger side air bag, never install or secure the
product to the air bag's cover or in places where it
may impede air bag deployment. Otherwise, proper
air bag operation may not be ensured in the event of
an accident, causing injury or death.
•
•
•
•
When installing this product, never use the existing
nuts or bolts that secure parts of the fuel tank, the
steering, or braking systems. Otherwise, improper
steering or braking and / or a fire may result.
•
•
•
When making holes using drill or similar tool, be sure
to wear protective eyewear. Otherwise, an injury
such as loss of eyesight may result.
To prevent a short circuit from occurring, disconnect
the battery's negative terminal prior to installing this
product. Otherwise, an electric shock or injury may
result.
Exposed wires must be insulated with electrical tape.
Otherwise, a short circuit, fire, or electric shock may
result.
When using an existing nut and/or bolt from the
vehicle to ground this product, do not use any that
secure parts of the steering or braking systems.
Otherwise, an accident may result.
Do not modify this system for use other than that
specified herein. Also, do not deviate from the
installation procedures described herein; Eclipse will
not be held liable for damages including, but not
limited to serious injury, death or property damage
resulting from installations that enable unintended
operation.
Bundle cables and harnesses with electrical tape or
wire ties to prevent them from interfering with moving
parts. If they should entangle with the steering wheel,
shift lever or brake pedal, an accident may result.
- -
3
•
•
•
For best results, this product should be installed by a
professional installer.
Play the audio at a moderate volume level that
permits you to hear sounds from outside the vehicle.
Driving with the inability to not hear outside sounds
may result in an accident.
Contact the dealer whom you purchased the product
for an appointment.
•
•
•
When installing this product, be sure to use the
supplied mounting hardware. If parts other than
those supplied are used, the unit may be damaged
internally, or may not be held in place securely and
become dislodged.
This product must be operated only as on-board
equipment, or it may cause electrical shock or injury.
Do not play distorted sounds for long periods of time;
the speakers may overheat and cause a fire.
•
Avoid installing this product in places where it may
get wet, such as near windows, or in places that are
moist, damp, or dusty. Presence of liquid, moisture,
or dust inside this product can cause short circuiting
resulting in smoke and / or fire.
Do not cover the ventilation holes or the cooling plate
of the product. If the ventilation holes or cooling plate
are covered, heat will build up inside the product and
fire may result.
•
Do not clean the cables or cords with volatile
chemicals such as alcohol, kerosene, thinner or
gasoline. Using such chemicals may cause warping,
discoloration or other damage.
•
•
If this product is not connected properly, a short
circuit, fire, and / or accident may occur.
When routing cables, use care so that they do not
contact sharp metal parts such as brackets or screw
tips. Otherwise, a short circuit, electric shock, fire and
/ or accident may result.
- -
4
Names and functions of terminals
•
•
Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
The cables should be secured with tape or similar securing method so that they will not cause an
obstruction while driving. If they get wound or entangled around components such as the steering
wheel, shifting lever, or brake pedal, accidents may result.
DECODER UNIT
1
[ LEFT SIDE ]
F
E
16P
INTERCONNECTING CABLE
2
(Power and speaker connector)
B
C
1
6
3
D
4
G
5
2
[ RIGHT SIDE ]
3
INTERCONNECTING
CABLE
DECODER UNIT
1
(Video input connector)
12P
Q
M
N
O
J
20P
K
R
P
L
A
H
4
INTERCONNECTING
CABLE
I
(VTR input/output connector)
Tip
•Refer to page 6 for details on the wire colors and connection points for interconnecting cables
.
2
•Refer to page 6 and 7 for details on connection points
through
for the main unit cables
A
R
and terminals.
- -
5
Wire colors and connection points for connection cables
2
Never connect the power supply to the speaker leads (No.5 and No.6),
otherwise it will cause damage to the main unit.
Caution
1
B+ (Yellow)
Connect where the power is constantly available, regardless of the ignition key's position.
2
Ground (Black)
Connect where good body grounding is available.
3
DVD MUTE wire (Pink)
If not using
and , insulate
Connect to H/A MUTE or DVD MUTE on the main unit.
3
4
them using PVC tape or similar.
If they are not insulated, incorrect
operation may result.
4
NAVI MUTE wire (Brown)
Connect to NAVI MUTE on the navigation unit.
5
Front speaker output leads
Connect to the front speakers.
White: Left +
White/Black:
Gray/Black:
Left -
Right -
Gray:
Right +
6
Rear speaker output leads
Connect to the rear speakers.
Green: Left +
Purple: Right +
Green/Black:
Purple/Black:
Left -
Right -
Main unit connectioms
E-LAN terminal
A
Connect to the main unit or to a CD changer (sold separately) if one is being used with the system.
Line-out terminal (Front Mid-Low)
B
C
D
Connect to the RCA input Connectors of an external
amplifier.
Line-out terminal (Front / Front Mid)
White : Left signal
Red :
Right signal
Line-out terminal (Front Hi)
•
•
•
The speakers to connect will vary depending on whether the speaker layout is 1-way speaker or
3-way speaker. (Refer to the instruction manual for details on switching the speaker layout.)
*
•
If the speaker layout is "1-way speaker":
Use the "LINE OUT" (Front/Front/Mid) terminal
.
C
Terminals
If the speaker layout is "3-way speaker":
Connect to the low-range speaker (woofer), connect
(squawker), and connect to the high-range speaker (tweeter).
and
are not used.
B
D
•
to the mid-range speaker
B
C
D
E
Line-out terminal (Rear)
Connect to the RCA input Connectors of an external amplifier.
White : Left signal
Red : Right signal
- -
6
Center speaker line-out terminal
F
If using a center speaker (sold separately ), connect it to the RCA input connector of an external
amplifier.
Woofer speaker line-out terminal
G
If using a woofer speaker (sold separately ), connect it here.
Connect the output cable of external
VTR input terminals (CH1)
H
I
video equipment sach as a VTR.
Yellow : Video signal
VTR input terminals (CH2)
White : Audio (left) signal
Red :
Audio (right) signal
Connect to the monitor's video input.
Yellow : Video signal
VTR output terminals (CH1)
VTR output terminals (CH2)
J
K
L
White : Audio (left) signal
Red :
Audio (right) signal
Video input terminal
Connect to the AV output terminal of the main unit.
Yellow : Video signal
White :
Red :
Audio (left) signal
Audio (right) signal
NAVI-VOICE input terminal
M
N
O
Connect to the NAVI sound volume output terminal of the main unit.
Video output terminal
Connect to the video input terminal of the main unit.
Digital input terminal
Connect to the digital output terminal of the main unit.
RCA digital input terminal (DIGITAL 1 )
P
Q
R
Connect to digital output terminal
of the external unit.
Optical digital input terminal (DIGITAL 2 )
MIC terminal 3.5 mm mini-jack
If measuring frequency response characteristics or carrying out automatic time alignment, connect
the accessory measuring microphone here.
- -
7
Speaker connection examples
If not connecting an external amplifier (sold separately)
DECODER UNIT
1
INTERCONNECTING CABLE
2
(Power and speaker connector)
Rear speakers
To center speaker (with amplifier)
L
R
L
CENTER
FRONT
Front speakers
R
REAR
SW
Hi
M
id
M
idLow
To sub-woofer (with amplifier)
DECODER UNIT
1
For a front 1-way speaker system
INTERCONNECTING CABLE
2
(Power and speaker connector)
NO CONNECTION
To center speaker
(with amplifier) or
external amplifier
To external anplifier
NO CONNECTION
L
R
L
CENTER
FRONT
R
REAR
SW
Hi
M
id
M
idLow
To sub-woofer
(with amplifier) or external
amplifier
To external anplifier
For a front 3-way speaker system
DECODER UNIT
1
INTERCONNECTING CABLE
2
(Power and speaker connector)
NO CONNECTION
To center speaker (with amplifier) or external amplifier
To external anplifier
To external anplifier
NO CONNECTION
L
L
CENTER
FRONT
R
R
REAR
SW
Hi
M
id
M
idLow
To external anplifier
To external anplifier
To sub-woofer (with amplifier) or external amplifier
- -
8
Installing the decoder unit
Install the side brackets to the sides of the
decoder unit with the supplied screws.
1
2
Hex-head bolt [x4 ]
7
Attach the self-adhesive pads to the base of the
side brackets.
Decoder unit
1
Side bracket [x2 ]
5
Life up the carpet underneath the vehicle seat
and find a suitable mounting location.
3
Self-ahesive pad [x 2 ]
6
Make marks on the floor to indicate the bracket
mounting location.
4
5
Use a knife to cut slits
Remove the side brackets from the decoder unit,
and attach the side brackets to the floor at the
indicated mounting location.
Use a knife to cut slits in the carpet at positions
corresponding to the top of the brackets.
6
5
SIDE BRACKETS [x 2 ]
Install the decoder unit to the side brackets.
7
Decoder unit
1
Hex-head bolt [x4 ]
7
- -
9
When measuring frequency response characteristics or carrying out
automatic time alignment inside the vehicle
Connect the accessory measuring microphone to
the decoder unit.
1
2
Microphone for measuing
frequency characteristics
13
Install the microphone to the headrest of the
driver's seat.
Tip
WIRE
•Using the supplied velcro strap, secure the
microphone to the base of the headrest.
•Refer to the owners manual of the main unit for
the correct procedures when taking
measurements.
Front of vehicle
DRIVER'S SEAT
- -
10
- -
11
“ECLIPSE” is a registered trademark of
FUJITSU TEN LIMITED in 48 countries
including the U.S. and Japan.
090003-28580700
0507DE (CN)
- -
12
|