Fujitsu Carrying Case FPCCC47 User Manual

F u j i t s u C o m p u t e r S y s t e m s  
Bump Case User’s Guide  
FPCCC47  
I N S T R U C T I O N S  
These instructions provide details on using the  
FPCCC47 Bump Case. This case is designed for  
use with your Tablet PC. The bump case provides  
added protection when transporting, using, or  
storing the Tablet PC.  
We strongly recommend that you read these  
instructions prior to using the bump case with  
your computer.  
 
Installing the Tablet PC  
Prior to installing the Tablet PC into the bump  
case, remove the pen. Once the system is  
installed, you will not be able to remove the  
pen. Store the pen in the pen holder. (Figure 1)  
Battery Release Latch access  
Velcro  
Strips  
Side Flap  
D-Rings  
(4 places)  
Hand straps  
WLAN switch access  
Figure 2. Bump case - Rear  
This bump case is designed to accommodate a  
system with a standard main battery or an  
optional high-capacity battery installed. The  
high-capacity battery is wider than the main  
battery, so a battery strap and a foam bumper  
(see Figures 3 and 4) are provided to secure  
the system when a main battery is installed.  
3
 
To install your Tablet PC into the bump case, position the  
case face down as shown in Figure 3. Open the side flap of  
the case. The flap is secured by a long strip of Velcro® that is  
attached to the back of the bump case. Note that the left side  
of the case is open for port access, but the system cannot be  
inserted or removed from that side.  
System with high-capacity battery installed:  
Remove the foam bumper that is attached to the Velcro strip  
on the flap prior to installing a system with a high capacity  
battery. Retain the bumper for when you use the system with  
a main battery.  
Slide the system into the bump case, with the screen facing  
the open window. (See Figure 3). Reattach the flap to the  
side of the case.  
Battery strap  
Bump case  
Tablet PC  
(rear, with side flap open)  
Figure 3. Inserting Tablet PC into Bump Case  
4
 
System with the main battery installed:  
Slide the system all the way into the bump case until it meets  
the opposite end of the case (see Figure 3).  
Pull the battery strap down tightly and tuck it under the  
battery so that it is snug against the side of the battery. (See  
Figure 4). Insert the foam bumper into the case, with the  
Velcro side facing out to the right. Reattach the flap to the  
side of the case.  
Note that either the strap or bumper can be used separately  
to secure the system, but for optimal security, both should  
be used.  
Tablet with  
6-cell battery  
Battery Strap  
Extra  
space  
Side flap  
Bumper  
Figure 4. Securing Main Battery in Bump Case  
5
 
Attaching a Shoulder Strap  
The ends of the elasticized handstraps have D-rings to which  
you can attach the shoulder strap. To secure the shoulder  
strap, attach the strap clips to two of the D-rings. The bump  
case can be carried vertically, horizontally, or diagonally,  
depending on how you orient the clips.  
You can also use one of the D-rings to attach a pen tether.  
Caring for the bump case  
The bump case is made of rugged materials, and is designed  
to withstand daily use. Treat the case as you would a brief-  
case or purse.  
Occasionally, the bump case may become soiled. To clean it,  
use a clean cloth and warm soapy water to wash the soiled  
area.  
6
 
7
 
1250 E. Arques Avenue (M/S 122),  
Sunnyvale, California 94085  
For more information, call  
1-877-372-3473 or visit our Web site at:  
us.fujitsu.com/computers  
For technical support call: 1-800-8fujitsu (1-800-838-5487)  
or e-mail us at: [email protected]  
Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu, Ltd. All other  
trademarks mentioned herein are the property of their respective owners.  
Product description data represents Fujitsu design objectives and is provided  
for comparative purposes; actual results may vary based on a variety of  
factors. Specifications are subject to change without notice.  
© 2003 Fujitsu Computer Systems Corporation. All rights reserved.  
FPC58-1044-01  
8
 

Eizo Computer Monitor F931 User Manual
Eton Weather Radio Sound 100 User Manual
Excalibur electronic Games ET454 User Manual
Fisher Price Doll 78157 User Manual
Fujitsu Computer Accessories Fujitsu SPARC64 V User Manual
GE Microwave Oven JE1050 User Manual
GE Washer Dryer S4200 User Manual
Global Machinery Company Automobile C4500 User Manual
Global Machinery Company Drill MX1G100 User Manual
Goodman Mfg Furnace GDH80453AXCA User Manual