H5698
Instructions
Please keep this instruction sheet for future reference,
as it contains important information.
Requires three "AA" alkaline batteries (not included).
Adult assembly is required.
Tool required for battery installation:
Phillips screwdriver (not included).
Lil Movers Train™
Assembly
1
2
•"Snap" the farm into the
farm base.
•"Snap" the tree house into the
tree house base.
3
•Fit the two curved track pieces onto the center track, as shown.
4
•Fit the farm, station and tree house onto the tabs around the track, as shown.
PRINTED IN CHINA
H5698pr-0920
3
Battery Installation
Battery
Compartment
Door
1.5V x 3
"AA" (LR6)
Shown Actual Size
Battery Safety Information
Batteries may leak fluids that can
cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
•Do not mix old and new batteries
or batteries of different types:
alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
•Insert batteries as indicated inside
the battery compartment.
•Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
•Dispose of batteries safely. Do not
dispose of batteries in a fire. The
batteries may explode or leak.
•Never short-circuit the
Bottom View
•Locate the battery compartment door
on the bottom of the train engine.
•Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
•Insert three "AA" (LR6) alkaline
batteries.
Hint: We recommend using alkaline
batteries for longer life.
•Replace the battery compartment
door and tighten the screws with
a Phillips screwdriver. Do not
over-tighten.
•When sounds or motions become
faint or stop, it’s time for an adult to
change the batteries!
battery terminals.
•Use only batteries of the same or
equivalent type, as recommended.
•Do not charge non-rechargeable
batteries.
•Remove rechargeable batteries
from the toy before charging.
•If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
CAUTION
To prevent entanglement,
keep hair away from wheels.
4
Fun Sounds Around the Track!
Power Switch
•Locate the power switch on the bottom of the train engine.
•Slide the switch to the
turn it off.
position to turn the toy on and to the
position to
•Place a figure in the train engine and press down.
•As the train travels around the track, you'll hear sound effects as it passes the
farm and the tree swing. At the station, the train stops to play a song.
•Use the train off the track too!
Note: If your child is not actively playing with the train, it goes to sleep. To
"wake up" the train, press down on a figure in the driver's seat.
•For best performance, use on hard, flat surfaces. We do not recommend using
the train engine on carpets.
5
Care
•Wipe the surface with a clean cloth dampened with a mild soap and water
solution. Do not immerse this toy.
•This toy has no consumer serviceable parts. Do not take this toy apart.
Consumer Information
Questions? We'd like to hear from you!
®
Call Fisher-Price Consumer Relations, toll-free at 1-800-432-5437,
8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using
TTY/TDD equipment, please call 1-800-382-7470. Or, visit us on line at
Write to us at:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora, New York 14052.
FCC Note (United States Only)
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by the manufacturer responsible
for compliance could void the user’s authority to operate the equipment.
For countries outside the United States:
CANADA: Questions? 1-800-432-5437. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2;
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2005 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
|