EV9328-03
Coldrink 3-MC² System
Delivers premium quality water for fountain applications
B E N E F I T S
Reduces chlorine taste and odor and other
offensive contaminants
New and improved Micro-Pure II media inhibits
the growth of bacteria
Improves the taste of fountain beverages and
helps retain the drink's carbonation
Precoat submicron technology reduces dirt and
particles as small as 1/2 micron in size and
reduces health contaminants such as cysts
Protects drink system seals, pump, tubing and
small orifices from clogging, corrosion and
abrasive wear
20" prefilter reduces dirt and particles
Coldrink 3-MC² System: EV9328-03
Manifold features water shut off, flushing valve,
inlet and outlet pressure gauges
MC² Replacement Cartridge: EV9612-56
EC210 Prefilter Cartridge: EV9534-26
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
NSF Certified under NSF/ANSI Standards 42
and 53
A P P L I C A T I O N / S I Z I N G
I N S T A L L A T I O N T I P S
O P E R A T I O N T I P S
Choose a mounting location suitable to support
the full weight of the system when operating
Change cartridges on a regular 6 month
preventative maintenance program
For fountain beverage applications
For most dual carbonator dispensers
Never use saddle valve for connection
Use 3/4” water line
Change cartridges when capacity is reached or
when pressure falls below 10 psi
Or, for dispensers using more than 50 tanks of
syrup or bag-in-box per month
Service flow rate must not exceed 5.0 gpm
Install vertically with cartridges hanging down
Rated Capacity: 27,000 gallons
Always flush the filter cartridge at time of
installation and cartridge change
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Inspect EC210 cartridge periodically to determine
dirt load
Flush cartridges by running water through system
for five minutes at full flow
Replace EC210 cartridge when dirt has penetrated
through to the inner core of the cartridge
|