Model
GI492H
LIMITED WARRANTY
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of the original purchase, when utilized for
normal household use, subject to the following conditions, exclusions and exceptions.
1700 Watt Steam Iron
If your appliance fails to operate properly while in use under normal household conditions within
the warranty period, return the complete appliance and accessories, freight prepaid to
with Supersize Soleplate
EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. 12901
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC
will repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the cost of return
shipping and handling must be included. *
OWNER’S MANUAL
120 V., 60 Hz, 1700 Watt
Model GI492H
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to
any unit that has been tampered with or used for commercial purposes. This limited warranty does
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty
packaging or mishandling in transit. This warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alterations to the product or any of
its parts, which have been performed by a repair person not authorized by EURO-PRO Operating
LLC.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
PRODUCT REGISTRATION CARD
Please complete and return within ten (10) days of purchase. The registration will enable us to
contact you in the event a product defect is discovered. By returning this card you acknowledge
to have read and understood the instructions for use, and warnings set forth in the accompanying
instructions.
RETURN TO: EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. 12901
PURCHASER: ……………………………………………………………………………………………
ADDRESS: ……………………………………………………………………………………………….
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Model GI492H
DATE OF PURCHASE: ……………….. MODEL: ………..…………. SERIAL NO: .…………….
Tel.: 1 (800) 798-7398
NAME AND ADDRESS OF STORE: …………………………………………………………………..
Printed in China
11
IRONING CHART
GETTING TO KNOW YOUR IRON
Before using your 1700 Watt Steam
Also, before ironing with steam for the
first time, allow iron to heat, hold in a
horizontal position and hit the burst of
steam button several times. The iron
may emit some small particles from the
steam holes. This is normal and will
clear after pressing the burst of steam
button several times.
NOTE: Before starting to iron delicate
To select iron temperature, align
temperature selected on dial with
the indicator on the water tank.
Iron, remove any labels, stickers or tags
that may be attached to the body or
soleplate of the iron.
When turned on for the first time, your
new iron may emit an odor for up to 10
minutes. This is due to the initial
heating of the materials used in making
the iron. The odor is safe and should not
reoccur after initial heating.
fabrics, it is best to first test the
temperature of the iron on a hem or an
inside seam.
DIRECTIONS
ON LABEL
SYNTHETIC
FIBERS, e.g.
acrylic, nylon
polyester
SILK
COTTON
LINEN
FABRIC
WOOL
TEMP.
MIN
MAX
CONTROL
• • • • •
•
MINIMUM MAXIMUM
STEAM
CONTROL
0
STEAM
STEAM
1. Power Supply Cord
2. Auto Shut-Off Light
3. Temperature Ready Light
4. Headlight Plunger Switch
5. Variable Steam Control
6. Burst of Steam
BURST OF
STEAM
7. Spray Button
8. Water Filling Inlet Cover
9. Headlight
10. Spray Nozzle
11. Temperature Control Dial
12. Water Level Window
13. Stainless Steel Soleplate
14. Iron Heel Rest
SPRAY
15. Supersize Soleplate
16. Soleplate Clip
17. Soleplate Retaining Tabs
18. Water Flask
Technical Specifications
Voltage:
Power:
120V., 60Hz.
1700 Watts
9
2
FEATURES OF STEAM IRON WITH HEADLIGHT
OPERATING INSTRUCTIONS (CONT.)
STORAGE
SELF-CLEANING
1. BURST OF STEAM
7. BUILT-IN ANTI-CALCIUM
FILTER
1. Always turn the variable steam
control to “0” after you have
emptied the water tank.
2. Allow the iron to cool down.
3. Always store the iron in the upright
position to protect the soleplate.
4. From time to time, clean the exterior
of the iron with a damp cloth and
wipe dry.
5. If you use spray starch, wipe the
soleplate occasionally with a soft
damp cloth to prevent the build-up of
deposits.
6. If the iron has not been used for a
few weeks, hold the iron horizontally
and allow to steam for 2 minutes
before ironing.
In order to remove calcium and built-up
particles, the self-cleaning system should be
run at least once a month.
• Fill the water beaker provided halfway
and then pour into the water reservoir.
• Set the variable steam control to the no
steam position.
• Insert the main plug into the wall socket.
• Set the temperature control dial to the
maximum temperature.
• Wait until the thermostat light goes off and
steam iron has reached preset
temperature.
The Burst of Steam provides
extra, sudden blasts of steam
which aid in removing stubborn
wrinkles from fabrics such as
denim, cotton or linen.
Prevents calcium build-up
and prolongs the life of the
iron.
8. STAINLESS STEEL
SOLEPLATE
2. ATOMIZER SPRAY
BUTTON
Provides maximum glide-
ability and heat retention.
Pressing this Button provides a
defined jet of spray which gently
moistens fabric.
9. PIVOT CORD
For left or right handed use.
Pivots up and down;
prevents dragging along the
fabric. The flexible cord
protector protects the cord
from fraying.
• Remove the plug from the wall socket.
• Hold the steam iron horizontally over a
sink.
3. VARIABLE STEAM
CONTROL
Minimum to maximum steaming for
different materials. Self cleaning
feature flushes internal sole plate
with water.
• Turn the variable steam control to
“Self-Clean
” position. Hot water and
WARNING: The anti-drip
function reduces water
steam will be emitted from the soleplate.
Swing the steam iron lightly back and forth
gently to allow lime and dust particles to
come out.
• When the water reservoir is empty, shift
the variable steam control from “Self-
Clean” position to “0”.
• Stand the iron upright and insert the plug
into the wall socket to let the iron heat up
again.
• Move the iron over a clean cotton cloth to
clean the soleplate and let the remaining
water on the soleplate evaporate.
dripping and water stains. It
does not prevent water
dripping or water stains if you
press the steam burst button
too often or if temperature is
too low. The amount of water
droplets will eventually
decrease after iron is used for
2 to 3 tankfuls of steaming
and ironing.
10. SELF-CLEANING
Flushes internal soleplate
with water.
4. TEMPERATURE CONTROL
Turn dial to select temperature.
Main temperature settings are
indicated by the 1, 2 and 3
11. HEADLIGHT
dots. (See “Ironing Chart.”)
Shadow free ironing.
5. ANTI-DRIP FUNCTION
Built-in Anti-Drip feature
12. SUPERSIZE SOLEPLATE
Removable supersize soleplate
requires fewer strokes when
ironing large surfaces. 40%
more coverage than regular
size soleplates.
helps reduce water spots by
cutting of water flow when
the iron temperature is too
low to build sufficient steam.
ANTI-DRIP FEATURE
Built-in Anti-Drip feature helps reduce
water spots by cutting of water flow
when the iron temperature is too low to
build sufficient steam. The anti drip
function reduces water dripping and
water stains. It does not prevent water
dripping and water stains if you press
the steam burst button too often or if the
temperature is too low. The amount of
water droplets will eventually decrease
after the iron is used for 2 to 3 tankfuls
of steaming and ironing.
6. WATER FILLING INLET
The cover prevents dust and
foreign matter from entering
the water tank. It also stops
any water from spilling during
ironing.
3
8
OPERATING INSTRUCTIONS (CONT.)
OPERATING INSTRUCTIONS
•
When reducing the temperature to
iron sensitive fabrics, allow
approximately 2 minutes for the iron
to cool to the new temperature
setting.
Fabrics such as velour, wool, linen
and silk are best ironed with an
ironing cloth to prevent shine marks.
ATTACHING THE SUPER-
SIZE SOLEPLATE
WARNING! Use caution when
attaching the soleplate to the
iron. Burns may occur from
touching hot metal surfaces, hot
water or steam.
1. Lift the soleplate clamp and place
the iron on the soleplate making sure
that the heel of the iron is fitted into
the two retaining tabs on the back of
the super-size soleplate.
2. Lower the nose of the iron and close
the soleplate clamp to secure the
iron in place. See figure 10.
1. Turn temperature dial to "MIN" and
This appliance is for HOUSEHOLD USE
ONLY and may be plugged into any
120V AC polarized electrical outlet. Do
not use any other type of outlet.
slide the variable steam control lever
all the way down to "0".
2. Plug the cord into a polarized, 120V
AC electrical outlet. The power "ON"
light will come on, indicating that the
iron is receiving power.
3. Turn the temperature dial to the
desired setting. (See "Ironing Guide"
for a guide to temperature selection.)
4. Place iron on its heel (on a stable,
protected surface) while iron is
•
BEFORE FIRST USE
Remove any labels, stickers or tags
which may be attached to the body or
the soleplate of the iron before using
the iron.
Before you start using your iron, read all
the instructions in the manual and do
the following in order to eliminate any
odor and small white residue particles
and to ensure optimum steam
performance.
EMPTYING THE IRON
1. Always empty iron after each use.
2. When finished using the iron, turn
the variable steam control to“0” and
the temperature control dial to "MIN".
3. Unplug the iron from the electrical
outlet.
warming to desired temperature.
STEAM IRONING
4. Set variable steam control to "MAX".
5. Turn the iron upside down over the
sink with the tip pointing downward
and allow the water to flow from the
opening. See figure 11.
6. Set variable steam control to "0".
7. Allow iron to cool in an upright
position before storing.
CAUTION! DO NOT aim iron
at face, towards yourself, or
anyone else while using or
adjusting steam. Burns or
serious injury may occur.
1. Fill the iron with regular tap water.
(See page 6 for filling instructions.)
2. Set the temperature control dial to its
highest setting and the variable
steam control to “0”.
3. When the temperature ready light
goes off, the iron has reached the
selected temperature. Set the
variable steam control to the highest
setting.
4. Keep the iron in a horizontal position
and allow it to steam until the water
runs out. Press the burst of steam
button to eliminate white residue
particles.
5. Repeat this procedure for two or
three fillings of water.
WARNING! Before filling the
iron with water, be sure the
iron is not plugged into the
electrical outlet. The iron may
be filled with water while it is
hot.
WARNING! Use caution when
emptying the iron. Burns may
occur from touching hot metal
surfaces, hot water or steam.
Fig. 10
CAUTION! TO PREVENT THE
RISK OF BURNS, use caution
when filling iron with water.
Burns can occur from touching
hot metal parts, hot water, or
steam.
3. To remove the super-size soleplate,
lift the soleplate clamp and remove
the iron.
IRONING HINTS
DRY IRONING
WARNING! To prevent fire, do
not leave iron unattended while
connected.
All marked settings on the temperature
dial can be used for dry ironing. Slide
the variable steam control lever all the
way down as shown in Figure 1. This
will cut off the steam flow if water is in
the tank.
Fig. 11
NOTE: Because of the soleplate design,
ordinary tap water may be used with this
iron. However, in very hard water areas,
we recommend using distilled or
demineralized water.
•
•
Sort articles to be ironed according
to the type of fabric. This will reduce
the need to adjust the temperature
for different types of garments.
If you are not sure of the fiber
content of a garment, test a small
area such as a seam or inside hem
section before ironing a visible area.
Start with a low temperature setting
and gradually increase to find the
best setting.
For Dry Ironing:
WARNING: Never fill the iron
with fabric conditioner,
starches or any other liquid, as
these will damage the steam
mechanism. Do not use
0
contaminated water.
Fig. 1
7
4
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS (CONT.)
6. Steam is produced as soon as the
NOTE: If the tank runs dry, remove the
NOTE: Before starting to iron delicate
1. Turn temperature dial to "••" or "•••"
and slide the variable steam control
to “0”.
iron is held in the horizontal position.
Steam will stop coming out when the
iron is put on its heel in a vertical
position or by turning the steam
control dial to "0".
plug from wall outlet. Then, fill the iron
with water and re-prime the pump. The
iron may be filled with water while it is
hot.
fabrics, it is best to first test the
temperature of the iron on a hem or
an inside seam.
2. Holding the iron at a slight angle,
pour water slowly into the water
filling inlet. See figure 2. Fill tank to
desired level or to the “MAX”
AUTOMATIC SHUT-OFF
4. For vertical steam,
press the burst of
steam button while
holding the iron
in a vertical
The auto shut-off safety function of your
Professional Iron is designed to engage
after approx. 7 minutes of non-use. The
auto shut-off indicator light will flash
when the auto shut-off has activated. To
reset your iron and continue ironing
follow these steps. See figure 9.
BURST OF STEAM
WARNING! DO NOT aim iron
at face, towards yourself, or
anyone else while using or
adjusting steam. Burns or
serious injury may occur.
water level marking using the water
filling flask. (When the iron is upright,
see-through water tank allows you to
gauge the amount of water.) DO
NOT overfill the tank.
position. See
figure 5. The
vertical steam
1) Lift the iron.
function is useful
for steaming
curtains and
The burst-of-steam button is useful
when ironing denim, cotton, and linens.
It provides extra, sudden blasts of
steam which aid in removing stubborn
wrinkles.
2) Holding the iron horizontally in front of
you, gently rock the iron back and
forth several times. This motion will
reset the safety switch inside the iron.
Do Not Shake the Iron.
The red temperature ready light will
illuminate when the auto shut-off system
has been reset. Allow time for the iron to
re-heat. The red temperature indicator
light will go out when the iron is ready for
use.
Fig. 5
drapes while still hanging.
WATER SPRAY
The burst-of-steam feature can be used
with Dry or Steam ironing as desired.
The water spray is
useful on fabrics
with stubborn
wrinkles. Press the
spray button and a
jet of water will
1. Make sure the water tank is at least
1/2 filled with water.
2. Set the temperature dial. Place the
iron on its heel (on a stable,
protected surface) and allow it to
heat for approximately 2 minutes.
3. With the iron in a horizontal position,
press the burst of steam button
several times to prime the pump.
See Figure 4.
Fig. 2
3. Plug the cord into a polarized, 120V
AC electrical outlet.
spray onto the
fabric being ironed.
Fig. 6
See Figure 6. The water spray can be
used with dry or steam ironing as
desired.
4. Turn the temperature dial to any of
the temperatures within the red
steam band and allow the iron to
heat for approximately 2 minutes
before ironing. Place iron on its
heel (on a stable, protected
Fig. 9
SELECTING IRON TEMPERATURES
Always read garment labels and follow
the manufacturer's ironing instructions.
Refer to the "Ironing Chart" on page 9
for temperature recommendations: See
figures 7 & 8.
HEADLIGHT
The headlight is used for shadow free
ironing.
To have the headlight on all the time,
hold the headlight plunger switch,
push it in a little and turn it clockwise.
The headlight will turn off only when
you place the iron on the heel rest. If
you do not want the headlight on, hold
the headlight plunger switch, push it in
a little and turn if counter clockwise.
surface) while the iron is warming to
desired temperature.
5. Slide the steam lever up to increase
the amount of steam. (See figure 3)
When using extra steam, the iron
uses more water and it may be
necessary to fill the tank more often.
See page 6 for refilling the iron with
water.
•
Use low settings for synthetics.
•• Use moderate settings for wool,
silks, and blends.
••• Use high settings for cottons and
linens.
Fig. 4
For Steam Ironing:
Variable Steam Control
0
Fig. 7
Fig. 3
Fig. 8
5
7
|