MIMO Wireless LAN Router
MIMO XR™
MIMO Wireless LAN AP Router
IEEE 802.11g/b with MIMO Solution
BR-6216Mg
Introduction :
The MIMO (Multiple-Input Multiple-Output) technology enables you to
connect to wireless networks from further distances than before, the MIMO
solution has two antennas for signal reception and one antenna for high
power signal transmission. Not only the reach is enhanced, but also the
“dead spots” in the network are reduced.
The features Packet-OVERDRIVE™ (Turbo Mode) technology that
combines Packet Burst and Frame Aggregation for up to 35 Mbps
throughput, without resorting to channel bonding that decreases available
channels and increases interference.
In addition, the MIMO solution remains backwards compatible, and works
perfectly with existing 802.11g/b products and doesn’t make previous Wi-Fi
investments redundant.
Features :
lP Sharing
The NAT/NAPT function lets you share the ADSL line with all the Intranet
users (supports up to 253 users). It also provides virtual server and virtual
DMZ functions to let your internal servers be accessed from the Internet.
Wireless MIMO Access Point
The wireless MIMO access point function offers your IEEE 802.11g/b
wireless client devices access to the Intranet through this router and
provides improved throughput and a broader reach than existing 802.11g/b.
Supports Special Applications
The router can let you setup trigger ports of special applications, and let
you utilize Internet services smoothly.
Virtual Server and DMZ
The virtual server and DMZ function lets you setup your servers in the
Intranet and still provides services to the Internet users.
|