R133
Multimedia Speaker
R133
User's Manual
Edifier Enterprises Canada Inc.
Made in China
Introduction
Completely MDF wooden case.
4 Long-throw subwoofer driver.
3 full range satellite speaker.
Power indicate.
Bass and volume controllers.
Magnetically shield speakers.
Open the packing
Please check the speaker Model number marked on the packing carton. Please contact the seller as soon as
possible if you find the speaker is the incorrect model or has sustained shipping damage.
R133 packing list:
Overview
1 x Sub Woofer
2 x satellite Speakers(with cord)
1 x User's Manual
Introduction of backpanel
1
2
3
4
5
6
7
8
9
Sub Woofer
R133
Satellite Speakers (left and right)
Volume Control
Multimedia speaker
Power Indicator
I
POWER
BASS
Inverse-phase hole
Line in Connector
Satellite Speakers Connector
Power Cord
SPEAKER
OUT
LINE
IN
Power Switch
10 Super Bass Control
11 User's Manual
CONNECTING
R133
Multimedia speaker
I
POWER
BASS
SPEAKER
OUT
LINE
IN
R
L
Connected
with AC power
Operating
1
2
3
Connecting
Connect the 3.5 Stereo Earphone Plug of the satellite speakers to the output port on the back panel of the
Subwoofer.
Connecting the Audio device
Connect the 3.5 Stereo Earphone Plug on the subwoofer rear panel to the Audio Device (Such as the
computer Sound Card, LINE-OUT, SPK-OUT).
Playing the audio device
Plug the AC power plug into the wall outlet and turn on the power switch.Now your speaker system is ready for
use. Adjust the volume control , then you can enjoy the music.
SPECIFICATIONS:
Total Power Output :
Input Impedance:
Input Sensitive:
RMS 2W x 2 + 6W
10K Ohm
400 mV
Bass Unit:
4
3
Aluminum voicecoil, 6 Ohm
Paper voicecoil, 4 Ohm
Tweeter Unit:
Frequency Response:
Dimension(Subwoofer):
Dimension(Satellite):
Gross Weight:
48 Hz ~ 20KHz
151(W) x 223(H) x 245(D)mm
86(W) x 162(H) x 121(D)mm
About 4.1 Kg
|