INTRODUCTION
Your GE Digital Answer-Phone™ is designed to give you flexibility in use, and
high quality perform ance. To get the m ost from your new telephone, we suggest
that you take a few m inutes right now to read through this instruction m anual. If
you have any questions or problem s, consult the Table of Contents, the Trouble-
shooting Guide, or the Index for the solution.
TABLE OF CONTENTS
INSTALLATION AND SETUP ................................................................................................................... 2
BEFORE YOU BEGIN ....................................................................................................................... 2
BATTERY INSTALLATION ................................................................................................................... 3
TABLETOP INSTALLATION ................................................................................................................. 4
WALL MOUNT INSTALLATION ........................................................................................................... 5
BATTERY LOW INDICATOR ................................................................................................................ 7
ANSWERING MACHINE SETUP ......................................................................................................... 7
CHOOSING/RECORDING AN OUTGOING ANNOUNCEMENT ...................................................................... 8
TELEPHONE OPERATION ...................................................................................................................... 9
FLASH BUTTON ............................................................................................................................. 9
REDIAL BUTTON .......................................................................................................................... 10
TEMPORARY TONE FEATURE .......................................................................................................... 10
MEMORY DIALING ........................................................................................................................... 11
STORING A NUMBER IN MEMORY ................................................................................................... 11
DIALING A NUMBER FROM MEMORY ............................................................................................... 12
ANSWERING MACHINE OPERATION ..................................................................................................... 13
MESSAGE PLAYBACK ................................................................................................................... 13
ERASING MESSAGES DURING MESSAGE PLAYBACK .......................................................................... 13
LEAVING A MEMO ....................................................................................................................... 14
CALL SCREENING/AUTO DISCONNECT ............................................................................................. 14
TOLL SAVER FEATURE .................................................................................................................. 15
ACCESSING THE ANSWERER FROM ANOTHER LOCATION ...................................................................... 15
TROUBLESHOOTING TIPS ................................................................................................................... 16
CARE AND MAINTENANCE ................................................................................................................. 18
SERVICE ......................................................................................................................................... 18
INDEX ............................................................................................................................................ 19
LIMITED WARRANTY ......................................................................................................................... 20
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
CAUTION: TO REDUCE THE THE EXCLAMATION
RISK OF ELECTRIC SHOCK, POINT WITHIN THE
DO NOT REMOVE COVER TRIANGLE IS
A
TRIANGLE IS
A
WARNING
SIGN
ALERTING YOU OF
T A
(OR BACK). NO US ER-
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
WARNING SIGN
ALERTING YOU OF
" D A N G E R O U S
VOLTAGE" INSIDE
THE PRODUCT.
I
M
P
O
R
N
T
WARNING: TO PREVENT FIRE
OR ELECTRICAL SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
I N S TRUCTI ON S
ACCOMPANYING
THE P RODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
2-9827 US IB E 2
1
1/31/98, 6:51 PM
BATTERY INSTALLATION
In the event of a power loss, the 9-volt alkaline battery backup enables the
answerer to retain m essages stored in m em ory, the outgoing announcem ent,
and tim e/day inform ation.
1. Unplug the telephone line from the
m odular jack on the wall.
2. Open the battery com partm ent door with a
Y
T T E B R A
flat tool.
3. Insert a 9-volt alkaline battery (not
included), as shown on the diagram inside
the battery com partm ent.
4. Snap battery com partm ent door into place.
NOTE: When the battery needs to be replaced,
the BATT. LOW indicator flashes.
BATTERY SAFETY PRECAUTIONS
For your safety, please follow these precautions:
•
•
•
•
Do not recharge, disassemble, mutilate, wet, or dispose of batteries in fire.
Keep batteries out of reach of children.
Replace with 9V battery only (not included).
When replacing batteries, be sure to unplug the phone line from the unit
before opening the battery compartment door and inserting the batteries.
3
2-9827 US IB E 2
3
1/31/98, 6:51 PM
TABLETOP INSTALLATION
6
ANSWERER
volume switch
2
1
PULSE/ TONE switch
RINGER volume switch
1. Plug the telephone line cord into PHONE LINE jack on the back of the unit
and the other end into a m odular jack RJ 11C .
2. Plug the handset cord into the handset and into the telephone jack on the
left side of the unit.
3. Set the PULSE/TONE switch on the left side of the phone to TONE if you use
touch-tone service; set it to PULSE if you have rotary service.
4. Adjust the RINGER volum e switch on the left side of the phone to the
desired setting (the phone will only ring with the ringer set to LO or HI).
5. Adjust the ANSWERER volum e switch on the right side of the phone to the
desired setting.
6. Plug the AC power adapter into the phone and into an AC outlet.
NOTE: Only use the Thomson 5-2399 AC adapter that came with this unit.
Using other adapters may damage the unit.
NOTE: Make sure that you have inserted the battery before installing the
phone. If you have not, see p. 3 for battery installation information.
4
2-9827 US IB E 2
4
1/31/98, 6:51 PM
WALL MOUNT INSTALLATION
Your phone can be m ounted on a wall
phone plate (not included). Before you
m ount the phone on the wall, write down
the 3-digit security code that is on the
underside of the phone. You need to know
this code in order to pick up your m es-
sages from another phone.
1. Rotate the handset hook one-half turn.
1
2. Plug one end of the telephone line
cord into the jack m arked PHONE LINE
on the back of the unit. Wrap the
excess cord around the plastic tabs.
Plug the other end of the telephone
line cord into a m odular wall jack.
2
3. Attach the wall m ount bracket by
turning the T-shaped bracket upside
down, as pictured. Then put the tabs
at the bottom of the bracket into the
m atching slots near the bottom of the
unit and snap the top tab into place.
3
4. Plug the AC adapter into the back of
the phone and into an AC outlet.
4
5
2-9827 US IB E 2
5
1/31/98, 6:51 PM
5. Slip the m ounting holes over
the wall plate posts and slide
the unit down firm ly into
place.
Mounting holes
5
6. Plug one end of the handset
cord into the handset and the
other end into the unit. Hang
up the phone.
ERASE
MESSAGES
REVIEW
ANSWER ON
SKIP
PLAY
•
STOP
MEMO
ANS. ON
7. Set the PULSE/TONE switch
on the left side of the phone
to TONE if you use touch-tone
service; set it to PULSE if you
have rotary service.
BATT LOW
MIC
ANNOUNCE
6
FLASH
REDIAL
STORE
MEMORY DIAL
1
4
ABC
2
DEF
3
GHI
J
KL
5
8
MNO
6
M
E
M
O
R
Y
L
O
G
PQRS7
TUV
WXYZ9
#
1
6
2
3
4
5
7
8
9
0
OPER
0
*
8. Adjust the RINGER volum e
switch on the left side of the
phone to the desired setting
(the phone will only ring with
the ringer set to LO or HI).
9. Adjust the ANSWERER
volum e switch on the right
side of the phone to the
desired setting.
ANSWERER volume
switch (right side)
9
8
7
O
R I
RINGER volume switch
PULSE/ TONE switch
NOTE: Make sure that you have
inserted the battery before
installing the phone. If you have
not, see p. 3 for battery installa-
tion information.
6
2-9827 US IB E 2
6
1/31/98, 6:52 PM
BATTERY LOW INDICATOR
When a battery has not been installed or needs
to be replaced, the BATT. LOW indicator
flashes rapidly.
MESSAGES/ ANSWER ON
indicator light
ANSWERING MACHINE SETUP
This section shows you how to set up your
answering m achine to receive incom ing calls.
Before you begin the setup, you m ust be sure
the answerer is on.
ERASE
MESSAGES
PLAY
ANSWER ON
STOP
•
REVIEW
SKIP
TURNING ON THE ANSWERING MACHINE
MEMO
ANS. ON
Press and hold the ANS.ON button to turn the
answering m achine on and off (the unit beeps
twice and a voice prom pts "functions on" or
"functions off").
BATT LOW
MIC
ANNOUNCE
ANS. ON button
NOTE: The unit takes approximately 10
seconds to emit the voice prompts
"functions on" and/ or "functions off."
When the answerer is on, the MESSAGES/
ANSWER ON indicator lights. When the day
and tim e need to be set or the outgoing
announcem ent needs to be recorded, the
MESSAGES/ANSWER ON indicator light
flashes rapidly.
BATT. LOW indicator light
SETTING THE VOICE TIME/ DAY
•
•
•
Press and hold the DAY button to set the
day of the week.
Press the HOUR button to set the hour
(a.m . or p.m .).
Press the MINUTE button to set the
m inute. When you hold the MINUTE
button, it advances the tim e in
5-m inute increm ents.
MINUTE button
HOUR button
DAY button
•
Press and quickly release the DAY button
to review the day/tim e setting.
7
2-9827 US IB E 2
7
1/31/98, 6:52 PM
CHOOSING AN OUTGOING ANNOUNCEMENT OPTION
The outgoing announcem ent is the announcem ent callers hear when they call
you and your answering system picks up the call. You can record a personalized
outgoing announcem ent or use the default announcem ent that is program m ed
into the answering system .
USING THE DEFAULT ANNOUNCEMENT
If you choose to use the default announcem ent, callers will hear, "Please leave
your m essage after the tone."
This announcem ent also serves as the default announcem ent when the answer-
ing system loses power and is com pletely reset (unless you installed a 9-volt
battery). If you installed the battery and recorded a personalized outgoing
announcem ent, your answerer does not default to this announcem ent because
your personalized outgoing announcem ent is retained in m em ory by the
battery power.
If you recorded a personalized outgoing announcem ent and then decide that
you want to use the default announcem ent instead, press the ANNOUNCE
button and release it within 1 second after the unit beeps.
RECORDING A PERSONALIZED OUTGOING ANNOUNCEMENT
When recording your outgoing announcem ent, you should be about 9 inches
from the MIC, located on the front of the unit, and elim inate as m uch back-
ground noise as possible.
1. Press and hold the ANNOUNCE button.
2. Begin talking after you hear the tone.
3. Release the ANNOUNCE button when you're finished talking.
SAMPLE OUTGOING ANNOUNCEMENT
Hi, this is (use your name here), I can't answer the phone right now, so please leave your name,
number and a brief message after the tone, and I'll get back to you. Thanks.
REVIEWING THE OUTGOING ANNOUNCEMENT
You can review the outgoing announcem ent by pressing and quickly releasing
the ANNOUNCE button.
NOTE: You can stop the outgoing announcement by pressing STOP while the
announcement is playing.
8
2-9827 US IB E 2
8
1/31/98, 6:52 PM
TELEPHONE OPERATION
MAKING A CALL
1. Pick up the handset to get a dial tone.
ERASE
2. Dial the num ber.
MESSAGES
REVIEW
ANSWER ON
SKIP
RECEIVING A CALL
PLAY
•
STOP
Make sure that the RINGER (on the side of the
unit) is set to LO or HI.
MEMO
ANS. ON
BATT LOW
MIC
ANNOUNCE
1. Pick up the handset when the phone
rings.
FLASH
REDIAL
MEMORY DIAL
STORE
2. Put handset in cradle when finished with
conversation.
1
4
ABC 2
DEF
3
GHI
J KL
MNO
5
6
FLASH BUTTON
PQRS
7
TUV
WXYZ9
8
To activate custom calling services such as
call waiting or call transfer, press the FLASH
button instead of using the hook switch.
(Custom calling services are provided by your
local phone com pany.)
OPER
0
#
*
FLASH button
9
2-9827 US IB E 2
9
1/31/98, 6:52 PM
REDIAL BUTTON
Redial the last num ber you called by pressing
the REDIAL button after you get a dial tone.
NOTE: Your phone's memory retains the
last phone number you dialed (as many as
32 digits). If you pressed any numbers after
dialing the phone number, (for example,
when accessing a voice-menu system) those
numbers are also redialed.
ERASE
MESSAGES
REVIEW
ANSWER ON
SKIP
PLAY
•
STOP
MEMO
ANS. ON
BATT LOW
MIC
ANNOUNCE
FLASH
REDIAL
MEMORY DIAL
STORE
TEMPORARY TONE FEATURE
The tem porary tone feature enables a pulse
phone to tem porarily change to a tone phone.
People with pulse-tone (rotary) service would
use this feature in order to access voice infor-
m ation that requires touch-tone service, such
as getting inform ation from a local bank or
using a voicem ail system . To use tem porary
tone:
1
4
ABC 2
DEF
3
GHI
J KL
MNO
5
6
PQRS
7
TUV
WXYZ9
8
OPER
0
#
*
1. Dial the num ber of the service.
REDIAL button
Tone button
2. Press the tone button (
) after you have
*
connected to the service in order to enable
touch-tone dialing.
3. When you hang up, the phone autom ati-
cally returns to pulse dialing m ode.
1 0
2-9827 US IB E 2
10
1/31/98, 6:52 PM
MEMORY DIALING
Store as m any as 10 num bers in m em ory for easy dialing. Num bers can be
stored in the num bered keys (0-9).
STORING A NUMBER IN MEMORY
1. Pick up the handset.
ERASE
MESSAGES
PLAY
ANSWER ON
STOP
2. Press STORE.
•
REVIEW
SKIP
3. Dial the num ber to be stored.
MEMO
ANS. ON
4. Press STORE followed by a Mem ory
Location (0-9 on the keypad).
BATT LOW
MIC
ANNOUNCE
FLASH
REDIAL
MEMORY DIAL
STORE
5. Write the phone num ber on the m em ory
directory (located in the cradle area of the
base, under the plastic cover).
1
4
ABC 2
DEF
3
GHI
J KL
MNO
5
6
ADDING A PAUSE TO THE DIALING SEQUENCE
Use the REDIAL button to insert a pause in the
dialing sequence when storing a num ber (for
exam ple, when you m ust dial 9 to get an outside
line or enter codes to access your bank's infor-
m ation line). Press REDIAL at the point in the
dialing sequence in which a pause is required.
PQRS
TUV
WXYZ9
7
8
OPER
0
#
*
STORE button
For exam ple, if you want to add a pause to the
dialing sequence when storing a num ber in
m em ory because you m ust dial 9 to get an
outside line:
MEMORY DIAL button
1. Pick up the handset.
2. Press STORE.
3. Press 9.
4. Press REDIAL to add a pause and then dial
the phone num ber to be stored in m em ory.
5. Press STORE followed by a Mem ory
Location (0-9 on the keypad).
1 1
2-9827 US IB E 2
11
1/31/98, 6:52 PM
CHANGING A STORED NUMBER
Change a stored num ber by replacing it with a different num ber (see "Storing a
Num ber in Mem ory"). Be sure to update your m em ory directory when you
change num bers.
DIALING A NUMBER FROM MEMORY
You can dial num bers from m em ory when using the handset. When you get a
dial tone, press the MEMORY DIAL button followed by the Mem ory Location
(0-9) for the num ber you want to dial.
CAUTION: If you make test calls to emergency numbers, remain on the line
and explain the reason for the call. Also, make these calls in off-peak hours,
such as early morning or late evening.
1 2
2-9827 US IB E 2
12
1/31/98, 6:52 PM
ANSWERING MACHINE
O
PERATION
This section discusses the buttons and features on the answering m achine.
ERASE button
REVIEW button
MEMO button
PLAY • STOP button
ERASE
SKIP button
MESSAGES
REVIEW
ANSWER ON
SKIP
PLAY
•
STOP
ANS. ON button
MEMO
ANS. ON
ANNOUNCE button
BATT LOW
MIC
ANNOUNCE
MIC
MESSAGE PLAYBACK
The MESSAGES/ANSWER ON indicator light lets you know when som ebody has
left a m essage. When you have new m essages the light blinks. If you have old
m essages that have not been erased, the light stays on. To hear m essages,
press and release the PLAY•STOP button. Incom ing m essages are lim ited to 3
m inutes each. Press and hold PLAY•STOP for 2 seconds to hear only new
m essages. (If no new m essages, old m essages will play).
While a m essage is playing, you can do the following:
•
•
Press PLAY•STOP to stop m essage playback.
Press and release REVIEW to restart the current m essage; continue to press
and release REVIEW to go to previous m essages.
•
•
•
Press and hold REVIEW to review current m essage.
Press and release SKIP to go to the next m essage.
Press and hold SKIP to fast forward through current m essage.
ERASING MESSAGES DURING MESSAGE PLAYBACK
Press and release the ERASE button to erase the m essage that is playing.
NOTE: Messages erased during playback cannot be restored.
1 3
2-9827 US IB E 2
13
1/31/98, 6:52 PM
TOTAL MESSAGE ERASE
You can erase all the m essages from m em ory by pressing and holding the
ERASE button when the unit is not playing m essages (the unit beeps to confirm
the m essages are erased). Note that total m essage erase cannot be com pleted if
there are any unplayed m essages.
NOTE: If you hear several high-pitched beeps, your answerer has not erased the
messages because some of them or all of them have not been played.
You can restore m essages erased this way by pressing the PLAY•STOP button—
but only if you haven‘t activated any other answerer functions or received new
m essages after erasing the m essages.
LEAVING A MEMO
Leaving a m em o is just like recording an outgoing announcem ent, except you
use the MEMO button instead of the ANNOUNCE button.
1. Press and hold MEMO.
2. When you hear a beep, continue holding MEMO and leave your m essage.
3. Release MEMO when you finish your m essage.
The m em o is included in the m essage count represented by the num ber of
tim es the MESSAGES/ANSWER ON indicator light flashes.
CALL SCREENING/ AUTO DISCONNECT
Because the answerer autom atically stops recording when an extension phone
is picked up (Auto Disconnect feature), you can screen incom ing calls. Listen as
the caller leaves a m essage and pick up the handset (or any extension phone) if
you want to talk to that caller.
MEMORY FULL
When the m em ory is full, you m ust erase old m essages so that there is room in
the m em ory for new m essages.
If the m em ory is full, the unit answers on the 10th ring and the MESSAGES/
ANSWER ON light flashes rapidly. When using the rem ote access feature, you
can enter your security code and then access your m essages.
NOTE: The unit answers on the 10th ring when it is turned off or the memory is
full. To access the answerer, enter the 3-digit security code after the beep. If
memory is full, play messages and erase some of them to restore memory. If the
answerer is off, press 6 to turn it on.
1 4
2-9827 US IB E 2
14
1/31/98, 6:52 PM
ACCESSING THE ANSWERER FROM ANOTHER LOCATION
You can access your answering m achine from a touch-tone phone by
entering the three-digit, security code after you hear the announcem ent.
The security code is located on the underside of your telephone.
1. Dial the phone num ber for the answering m achine.
2. Enter the 3-digit security code after you hear the tone.
3. Follow the voice m enu instructions to perform the answerer functions.
The rem ote feature enables you to perform the following functions:
To
Press this Button
Play m essage
1
Repeat m essage
8 (while m essages are playing)
Play previous m essage
Stop m essage playback
Erase m essage
7 (while m essages are playing)
3 (while m essages are playing)
0 (while m essages are playing)
Skip m essage
9 (while m essages are playing)
Turn answerer off
Turn answerer on
Record new announcem ent
Leave a m essage
5
6
8
7
Play outgoing announcem ent
2
TIP: You can bypass the outgoing announcement by pressing any numbered key
on the keypad while the announcement is playing. Then, after the beep you can
enter your security code to access the answering machine.
TOLL SAVER FEATURE
If you call to retrieve m essages and there are no saved m essages or new
m essages, the unit answers on the 5th ring. If there are new m essages, the unit
answers on the 2nd ring. If you're calling long distance or from a pay phone to
pick up your m essages, you can hang up after 3rd ring and save the cost of the
call.
1 5
2-9827 US IB E 2
15
1/31/98, 6:52 PM
TROUBLESHOOTING TIPS
TELEPHONE PROBLEM
SOLUTION/ EXPLANATION
•
•
Check hook switch to m ake sure it pops up.
No dial tone
Can't dial out
Make sure TONE/PULSE is set to correct
position.
•
Unplug the phone, wait 30 seconds, and
plug the phone back in.
•
•
Check RINGER VOLUME.
Phone doesn’t ring
Could have too m any phones on one line.
(See FCC inform ation regarding REN)
•
This is norm al as power is fluctuating with
phone outpulsing.
Light and tone feedback
flutter w hen dialing in
pulse m ode.
•
•
Make sure phone cord is securely plugged in.
Can’t be heard by
other party
Make sure you entered num bers correctly.
(See "Mem ory Dialing.")
Mem ory dialing
problem s
1 6
2-9827 US IB E 2
16
1/31/98, 6:52 PM
ANSWERING MACHINE PROBLEM
SOLUTION/ EXPLANATION
Can’t hear m essages
•
•
Adjust answerer volum e (p.4)
Tim e/ Day Stam p
stuck at 1 a.m Monday
Set the tim e/day clock (p. 7).
Answ ers on 10th ring
•
•
Make sure answerer is turned on.
Mem ory is full. Play m essages and
erase them . (p. 14)
Incom ing m essages
are incom plete
•
Was an extension phone picked up
while the caller was leaving a m essage?
•
•
Mem ory is full.
You accidentally pressed the
PLAY•STOP button during playback and
stopped the m essage.
•
•
•
Must use a tone-dial phone.
Won’t respond to
com m ands w hen
you call m achine from
another location
Must enter correct security code (p. 15)
Did the unit hang up? If you take no
action for a period of tim e, it autom ati-
cally hangs up.
Answ er function
operates erroneously
or not at all.
•
Unplug the power cord from the back of
the unit and plug it back in to reset the
answerer.
1 7
2-9827 US IB E 2
17
1/31/98, 6:52 PM
CARE AND MAINTENANCE
To keep your GE telephone working and looking good, follow these few sim ple
guidelines:
•
Avoid putting the phone near heating appliances and devices that generate
electrical noise. (i.e., m otors, fluorescent lam ps.)
•
•
•
Phone should not be exposed to direct sunlight or m oisture.
Avoid dropping the handset and other rough treatm ent.
Clean telephone with a soft cloth. (Rem em ber to first unplug the phone
from the wall outlet.)
•
•
Never use a strong cleaning agent or abrasive powder, as this will
dam age the finish.
Retain the original packaging for future use.
SERVICE
The FCC requires this product be serviced only by the m anufacturer or its
authorized service agents. In accordance with FCC requirem ents, changes or
m odifications not expressly approved by Thom son Consum er Electronics could
void the user’s authority to operate this product. For instructions on how to
obtain service, refer to the warranty included in this guide or call custom er
service's telephone num ber: 800-448-0329.
Attach your sales receipt to the booklet for future reference or jot down the date
this product was purchased or received as a gift. This inform ation will be
valuable if service should be required during the warranty period.
Purchase date
Store Nam e
1 8
2-9827 US IB E 2
18
1/31/98, 6:52 PM
INDEX
P
A
Parts checklist
2
ANS. ON button
7
Pulse (rotary) service 4, 6, 10
PULSE/TONE switch 4, 6
Answering machine setup
Accessing answering machine from
another location 15
7
R
REDIAL button 10
Remote access
from another location 15
Review an outgoing announcement
REVIEW button 13
RINGER volume switch 4, 6
B
Battery Installation
Battery safety precautions
BATT. LOW indicator
3
3
8
7
C
Care and maintenance 18
S
Security code 15
Service 18
Setup 2-7
SKIP button 13
STOP button 13
E
ERASE button 13
Erasing messages 13, 14
F
FLASH button
9
T
Tabletop installation
4
H
Temporary tone feature 10
Time/Day stamp, setting up
Troubleshooting tips 16
Handset
2
7
M
Memo 14
Memory dialing
storing a number 11
W
Wall mount installation
5
dialing a stored number 12
Message playback 13
Modular jack
2
O
Outgoing announcement
8
recording
reviewing
8
8
1 9
2-9827 US IB E 2
19
1/31/98, 6:52 PM
LIMITED WARRANTY
What your w arranty covers:
•
Any defect in m aterials or workm anship.
For how long after your purchase:
•
Two years.
(The warranty period for rental units begins with the first rental or 45 days from date of shipm ent
to the rental firm , whichever com es first.)
What w e w ill do:
•
•
Provide you with a new, or at our option, a refurbished unit.
The exchange unit is under warranty for the rem ainder of the original product’s warranty
period.
How to m ake a w arranty claim :
•
Properly pack your unit. Include any cables, etc., which were originally provided with the
product. We recom m end using the original carton and packing m aterials.
Include in the package evidence of purchase date such as the bill of sale. Also print your nam e
and address and a description of the defect. Send standard UPS or its equivalent to:
Thom son Consum er Electronics, Inc.
•
Product Exchange Center
32 Spur Drive
El Paso, Texas 79906
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
A new or refurbished unit will be shipped to you prepaid freight.
What your w arranty does not cover:
3
•
Custom er instruction. (Your Owner’s Manual provides inform ation regarding operating instruc-
tions and user controls. For additional inform ation, ask your dealer.)
Installation and set-up service adjustm ents.
•
•
•
•
•
•
Batteries.
Dam age from m isuse or neglect.
Products which have been m odified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of God, such as but not lim ited to lightning dam age.
Product Registration:
•
Please com plete and m ail the Product Registration Card packed with your unit. It will m ake it
easier to contact you should it ever be necessary. The return of the card is not required for
warranty coverage.
How state law relates to this w arranty:
•
This warranty gives you specific legal rights, and you m ay have other rights which vary from
state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty inform ation.
•
Model 2-9827A
347A8329-0001 (Rev. 2 E/S)
97-15
P.O. Box 1976, Indianapolis, IN 46206
© 1997 Thom son Consum er Electronics, Inc.
Tradem ark(s) ® Registered
Printed in China
Marca(s) Registerada(s)
2-9827 US IB E 2
20
1/31/98, 6:52 PM
|