DEV9100-23
CGS-23 20" Parallel Housing
Foodservice System Housing for Drop-In Cartridges
B E N E F I TS
20" low profile Slim Line dual bowl housing in
Parallel configuration
Manufactured of durable polypropylene and has
excellent chemical resistance
System includes pre-mounted water pressure
gauge
Equipped with a pressure relief button to relieve
water pressure during cartridge changes
Includes wall mounting bracket and hardware for
fast and easy installation
System is shipped fully assembled
Always install two cartridges of the same type
Cartridges sold separately
CGS-23 20" Dual Parallel Housing: DEV9100-23
AP P LI C ATI ON / S I ZI N G
I N S TALLATI ON TI P S
OP E R ATI ON TI P S
Choose a mounting location suitable to support
the full weight of the system when operating
Change cartridges on a regular 6 month
preventative maintenance program
For foodservice applications
Bowl housing assembly accepts drop in cartridges
Capacity: varies according to filter cartridge used
Install vertically so bowls hang down
Change cartridges when capacity is reached or
when pressure decreases
Allow 2-1/2” clearance below the cartridge for
easy cartridge replacement
Always inspect O-ring; change and/or lubricate
if necessary
Make sure O-ring on bowl is sufficiently
lubricated
Clean bowl with mild solution of detergent
before inserting new cartridge
Always screw on bowls by hand; do not use a
housing wrench
Always flush the filter cartridge at time of
installation and cartridge change
Flush filter by running water through filter
according to cartridge instructions
|