Plasma P2
Single 18”
Powered Subwoofer
KeyFeatures:
•
•
800W Dynamic Output Power
Compact, Ergonomic Size for Easy
Transportation
•
•
•
EVX-180B, Direct Radiating 18” Woofer
Built-in Crossover
LPN-Filter to Compensate LF Transient
Distortion for Full Extended Bass Response
•
•
•
Integrated Heavy-Duty Casters
Linear Response, Fail-Safe Operation
Voice Coil Tracking Protection
General Description:
Technical Specifications:
TheElectro-Voice® PlasmaP2isanewgenerationofhi-power
compactsubwoofers. DesignedforEV’sPlasmaP1speakers,
it’sanidealsystemextensionforPlasmaP1poweredspeakers.
Freq. Response (-3 dB): 40 Hz - 100 Hz
Freq. Range (-10 dB)1: 30 Hz - 110 Hz
Calculated Max SPL: 132 dB
Amplifier Design: Class H
A class H amplifier requires no fans for quiet operation,
low maintenance, and long-term reliability. Coupled with
signal processing for linear acoustic response, and
unobtrusive protection it delivers the power required for
high-level reinforcement. Dynamic linearity is another
benefit of amplifiers designed for system integration with
large format transducer motors.
THD: < 0.05%
Input Impedance: 20K Ω
Amplifier Power: 550 W RMS (800W Peak)
Low-Pass Crossover: 100 Hz
Level Control: - θ to +6 dB
Input Sensitivity: +6 dB for full output
Transducer: 18" (460 mm) EVX180B
Connectors:
The Patented LPN (Low-Pass-Notch) filter compensates for
transient distortion of dynamic signals and allows, the Plasma
P2 to achieve a higher acoustic output than expected from a
compact cabinet.
Balanced Line Inputs: XLR and ¼" phone Combination
Balanced Output: XLR
Power Requirement: 100, 120, 230, or 240 VAC, 50-60Hz
Enclosure Material: 13-ply Birch Plywood
Cabinet Finish: Futura
P1’s applications are for where the highest quality sound
is required; Theater, A/V, Stage monitoring, Sound re-
inforcement.
Grille: Powder Coated Steel with Cloth
Hardware Included: Casters; Pole Mounting Flange
Dim (H x W x D): 35.8" x 18.8" x 23.6"
(910 x 476 x 600 mm)
Net Weight: 140 lbs (63.6 kg)
Shipping Weight: 150 lbs (68.1 kg)
|