E-iSERV Operation Guide
CD/USB Multi-Source Tuner with Bluetooth
wireless technology
We appreciate your purchase of this CD tuner.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
Load the downloaded data from the USB memory or CD-R to the unit. For details of
the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.
2
Audio customize
Importing Sound Data
Audio Customize
Audio Customize provides the best acoustic settings suited for your in-car environment with
ECLIPSE's unique acoustic correction algorithm.
How to download the Audio Customize setting files
Analyze the frequency characteristic and write it to the USB memory. Use the optional
(MEI-100) microphone to analyze the frequency characteristic.
1
For details of the operation, see 'Displaying measurement results and save to USB memory'
in the Owner's Manual.
Writing measurement results to the USB memory drive
ATTENTION
<When using a USB memory drive>
•
Sound quality data is written to USB memory drive as follows.
ECLIPSE
SOUND
208 000.ftn
*
File extension
Three digit number
Adjustment mode
(a: 3 Way, d: 4 Speaker)
• The folders and files that are required for E-iSERV sound effect customizations are created
automatically when the data is written to the USB memory drive.
• Select a file in
ECLIPSE
SOUND
when uploading sound quality data to E-iSERV (website).
Upload the analyzed frequency characteristic data to the E-iSERV website, and make
adjustment on the website. For details of the operation, see the HELP page on the
website.
2
3
Load the adjusted data from the USB memory to the unit.
For details of the operation, see 'Importing Sound Data (Sound Data)' in the Owner's
Manual.
ATTENTION
<When using a USB memory drive>
•
Data downloaded from the E-iSERV website should be saved to folders created in the USB drive
as shown below (NOTE: in order for the system to properly recognize and load audio customization
data, the user must create and name their folders as shown in the diagram below).
ECLIPSE
Must be created by user
DATA
208 X 00 .eis
Automatically generated filename
File extension
*
Two digit number
Adjustment pattern
Adjustment mode
(a: 3 Way d: 4 Speaker)
• Files retrieved from the E-iSERV website are automatically generated filenames upon
download.
<When using a CD-R>
• The main unit can only import files located in the root directory of the CD-R.
208 X 00 .eis
Automatically generated filename
File extension
*
Two digit number
Adjustment pattern
Adjustment mode
(a: 3 Way d: 4 speaker)
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* CD-ROMs written in MODE2_FORM2 cannot be read.
• The loading process may take longer if the CD-R contains unrelated data in addition to
the audio customization files to be imported.
Steering Remote Control
Importing steering remote data (U.S.A. only)
Steering Remote Control
The vehicle’s factory loaded steering remote becomes inoperable when the CD7200 mkII is
installed. The ECLIPSE website (E-iSERV) provides software that enables steering remote
operation even with the installation of the main unit. Import this software into your CD7200 mkII.
How to operate the Steering Remote Control
Download the file for Steering Remote setting from the E-iSERV website, then write
it to USB memory or CD-R.
1
ATTENTION
<When using a USB memory drive>
• Data downloaded from the E-iSERV website should be saved to folders created in the USB
drive as shown below (NOTE: in order for the system to properly recognize and load steering
remote data, the user must create and name their folders as shown in the diagram below).
ECLIPSE
Must be created by user
DATA
Automatically generated filename
File extension
XXXXXXX.ssw
•
Files retrieved from the E-iSERV website are given automatically generated filenames upon download.
• The main unit cannot be in USB music playing mode during this procedure.
<When using a CD-R>
• The main unit can only import files located in the root directory of the CD-R.
Automatically generated filename
File extension
XXXXXXX.ssw
• Disc formats that may be used are as follows:
• CD-ROM (MODE 1)
• CD-ROM (MODE2_FORM 1)
* CD-ROMs written in MODE2_FORM2 cannot be read.
• When data is imported from a CD-R, the importing process well take a long time if a lot
of data other than the import data has also been saved to the CD-R.
Load the downloaded data from the USB memory or CD-R to the unit. For details
of the operation, see ' Reading steering remote data (U.S.A. only) ' in the Owner's
Manual.
2
ATTENTION
• This function is available only for the vehicles that have steering remote with the voltage
detection type interface.
• For detail of the setting, please contact to ECLIPSE dealer.
|