Remote Videoalarm
VEPRO
l EDGE/GSM or LAN Remote Alarm System
l Built-in communication module
l Wireless LAN connection
l Up to 4 IP Videocameras (Wi-Fi or LAN) management
l Up to 20 433MHz wireless sensors management
l Pre and post alarm image management
Security
DESCRIPTION
VEPRO System is the Digicom’s innovative solution for the remote
control and videoalarm.
A cutting edge solution of security projected and carried out by Digicom
to build a wireless videoalarm system with EDGE, GPRS or LAN
connectivity.
All the Vepro tecnology is mainly based on the concentrator, with
Gateway functions, that is able to monitor up to 4 IP videocameras
(via Wi-Fi or LAN) and up to 20 intelligent sensors (Smart series).
The concentrator is equipped with a Class 10 EDGE/GPRS
communication device that allows the remote control of the installation
status and to send the alarms to the headquarter.
The system is composed by Wi-Fi IP videocameras (IP Camera 300), by
wireless sensors and by backup systems to guarantee the operation
even when power is off.
The 433MHz wireless sensors are continuously
controlled by the concentrator that sends scheduled
SMS and checks the battery charge. Each sensor is
unique of its kind (as in high level alarm systems) and
allows an exact identification of the alarm zone.
The latest generation IP videocameras can operate by day and night as they are equipped
with a light sensor and an infrared led. Furthermore they can manage the Duplex function with
a double flow of images both in photo format (JPG) and in streaming in MPEG-4 format. The
videocamera can be supplied with a battery back-up device to guarantee the operation even when
power is off.
VEPRO 16/10/2008
For further information visit our
website
|