AREA
70-400W
RC AREA LUMINAIRE
MH/HPS/SMH
ARM-MOUNTED AREA/SITE LUMINAIRE
23 7/8" [606mm]
10" [254mm]
8"
[203mm]
STREETWORKS™
15 1/2" [394mm]
IP65 RATED
HOUSING
ORDERING INFORMATION
SAMPLE NUMBER: RCL70SP23D4
Die-cast aluminum housing and
door. ANSI wattage/source label.
PRODUCT
FAMILY
RCL=Arm Mount
RCS=Slipfitter Mount
LAMP WATTAGE
70=70W
VOLTAGE 3
DISTRIBUTION
OPTIONS +
ACCESSORIES
(See Below)
LAMP TYPE 3
S=HPS
BALLAST TYPE 3
H=Reac./HPF
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
LENS
2=120V
1D=Type I MCO
Tempered glass lens.
10=100W
15=150W 2
17=175W
20=200W
25=250W
31=310W
40=400W
0=208V
R=SMH
2D=Type II MCO
1
4=240V
M=MH
3D=Type III MCO
REFLECTOR
AC=Area Cutoff-Type IV 4
7=277V
Hydroformed anodized aluminum
reflector.
8=480V
W=Multi-Tap wired 120V
F=120/240 wired 120V
P=240V
C=CWI
K=10KV CWA
SOCKET
Mogul-base porcelain lamp socket.
24=250/400W wired 250W
42=400/250W wired 400W
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
GASKET
The optical chamber is sealed with
a die-cut, dacron polyester gasket.
OPTIONS + ACCESSORIES [ Must be listed in the order shown and separated by a dash]
BALLAST
OPTIONS (add as suffix)
ACCESSORIES (order separately)
OA1224=TufGuard Vandal Shield
OA1016=105-285V Photocontrol
OA1013=Shorting Cap
Removable swing-down ballast
assembly available on arm mount
RCL only. Ballast standard hard
mounted in RCS slipfitter. Optional
hard mount ballast. (RCL only).
1=Single Fused, Internally Mounted (120 or 277V)
2=Double Fused, Internally Mounted (208, 240, or 480V)
4=Photocontrol Receptacle
WH=White
BK=Black
AP=Grey
V=External, Auxiliary Vandal Shield, 1/8" Thick Polycarbonate
B=House Side Cutoff
H=Plug-in Starter Receptacle
P=Prismatic Drop Lens
OA1027=480V Photocontrol
OA1061=Direct Mount Plate for Square Pole
OA1062=10" Arm for Square Pole (EPA .53)
OA1063=Direct Mount Plate for Round Pole
OA1064=10" Arm for Round Pole (EPA .53)
OA1065=Wall Mount Bracket
DOOR
Die-cast aluminum with
spring-loaded latches for toolless
entry.
OA1090=Adjustable Slipfitter for 2 3/8" O.D. Vertical Tenon
SLIPFITTER (RCS)
Optional internal slipfitter fits
1 1/4"-2 3/8" O.D. pipe.
R=Hard Mount Ballast (for arm mount fixture only)
T=Terminal Block
U=U.L. Listed
AIR=Arm Included for Round Pole
AIS=Arm Included for Square Pole
FINISH
Standard polyester powder coat
finish in bronze. For more color
options see optional colors or
consult your Streetworks
represenatitive for more
information.
OPTIONAL COLORS [ Standard color is bronze, other finish colors available. Consult your Cooper Lighting representative]
WH
BK
AP
White
Black
Grey
SHIPPING DATA
Approximate Net Weight:
46 lbs. (21 kgs.)
NOTE: 1 Hard mount ballast only. 2 150W HPS units are for S55 lamp. 3 Refer to technical section for lamp/ballast/voltage compatibility. 4 ED28 Lamp.
102 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
|