ROADWAY
50-250W
OVZ DROP LENS REFRACTOR
MH/HPS/MERCURY
ROADWAY LUMINAIRE
27 3/32" [688mm]
9 3/4"
[248mm]
12 5/8" [321mm]
STREETWORKS™
HOUSING
ORDERING INFORMATION
Die-cast aluminum housing and
latch. Standard grey polyester
powder coat finish. Other finish
colors available.
SAMPLE NUMBER: OVZ50SR22E4
LAMP TYPE 2
S=High Pressure
Sodium
BALLAST TYPE 2
C=CWI
VOLTAGE2
2=120V
DISTRIBUTION4
CUTOFF4
D=MCO
E=MSCO
OPTIONS +
ACCESSORIES
(See Below)
PRODUCT
FAMILY
OVZ
LAMP WATTAGE
50=50W
2=Type II
3=Type III
70=70W
H=Reac./HPF
K=10KV CWA 3
M=Mag. Reg.
N=Hi. Reac./NPF
P=Hi. Reac./HPF
R=Reac./NPF
W=CWA
0=208V
REFLECTOR
10=100W
15=150W 1
17=175W
20=200W
25=250W
V=Mercury
4=240V
The optical system is a
hydroformed anodized aluminum
reflector with a Dacron polyester
filter.
M=Metal Halide
7=277V
8=480V
9=347V
F=120/240 wired 120V
P=240 w/PCR wired 120V
W=Multi-Tap wired 120V
N=Multi-Tap wired 277V
V=Multi-Tap wired 240V
DOOR
Die-cast aluminum door frame
with integral hinges for hands free
installation, relamping and
maintenance. ANSI wattage/source
label.
OPTIONS + ACCESSORIES [ Must be listed in the order shown and separated by a dash]
LENS
OPTIONS (add as suffix)
ACCESSORIES (order separately)
1=Single Fuse, Internally Mounted (120 or 277V)
RA1001=Cutoff Visor
Removable prismatic refractor
for use with High Pressure Sodium,
Metal Halide and Mercury lamp
sources.
2=Double Fuse, Internally Mounted (208, 240, or 480V)
OA/RA1013=Photocontrol Shorting Cap
4=Photocontrol Receptacle
OA/RA1014=120V Photocontrol
WH=White
OA/RA1016=105V-285V Photocontrol
BK=Black
OA/RA1027=480V Photocontrol
BZ=Bronze
SOCKET
OA1028=Field Installed PCR Kit
E=150W/100V/HPS Ballast
Adjustable mogul-base porcelain
socket.
OA1216=TufGuard Vandal Shield
G=Borosilicate Glass Refractor (175W & below) 5
H=Plug-in Starter Receptacle
K=Level Indicator
BALLAST ASSEMBLY
Hard mounted ballast with
encapsulated starter for protection
from environmental abuse.
Standard two position tunnel type
compression terminal block. Three
position available.
M=MOV Lightning Surge Protector 6
P=Polycarbonate Refractor (250W Max.)
U=UL/CSA Listed
F=Flat Glass
OPTIONAL COLORS [ Standard color is grey, other finish colors available. Consult your Cooper Lighting representative]
MOUNTING
Two-bolt/one bracket slipfitter
with cast-in pipe stop and leveling
steps. Fixed-in-place birdguard seals
around 1 1/4" or 2" mounting arms.
WH
White
BK
Black
BZ
Bronze
EPA:
Effective Projective Area: .85
SHIPPING DATA
Approximate Net Weight:
31 lbs. (14 kgs.)
NOTE: 1 150W units are for S55 lamp. 2 Refer to technical section for lamp/ballast/voltage compatibility. 3 Available in 120/240V dual voltage or single voltage only (120, 208, 240, 277 or 480V). 50-150W. 4 Other distributions &
cutoffs available. Consult your Streetworks Representative. 5 Acrylic is standard on units 50W through 150W HPS and 175W mercury. Glass standard for 200-250W. 6 MOV option is not available for any system requiring
a three position terminal block (Example—240V with PCR wired 120V). In order for MOV option to function center terminal of three position terminal block must be connected to “Earth” ground.
112 STREETWORKS Outdoor Lighting Solutions
Cooper Lighting
|