I N S T A L L A T I O N I N S T R U C T I O N S
Fusion Extender Bracket
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FHB3032
Installation Instructions
FHB3032
TOOLS / PARTS FOR INSTALLATION
A (2)
[Extender
Bracket]
B (4)
5/16-18"
C (4)
5/16"
ASSEMBLY AND INSTALLATION
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the maximum weight
installed on the interface bracket doesn’t exceed 75 lbs
(34 kg).
1. Use four 5/16-18" hex nuts (B) and four flat washers (C) to
connect Fusion uprights to extender brackets (A). (See
Figure 1)
(A) x 2
x 4
3
(C) x 4
(B) x 4
1
(A) x 2
Figure 1
2. Lay display face down on a soft surface.
Figure 2
3. Use four M6x16mm Phillips machine screws (included with
mount) to attach extender brackets (A) to display. (See
Figure 2)
4. Complete the installation following the mount installation
instructions.
3
FHB3032
Installation Instructions
USA/International
Europe
A
P
F
A
P
F
6436 City West Parkway, Eden Prairie, MN 55344
800.582.6480 / 952.225.6000
877.894.6918 / 952.894.6918
Franklinstraat 14, 6003 DK Weert, Netherlands
+31 (0) 495 580 852
+31 (0) 495 580 845
Chief, a products division of
Milestone AV Technologies
Asia Pacific
A
Office No. 1 on 12/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
852 2145 4099
852 2145 4477
8800-002541 Rev00
¤2014 Milestone AV Technologies
02/14
P
F
|