azur 340A/340A SE
Integrated amplifier
User’s manual
340A/340A SE Integrated amplifier
INTRODUCTION
Thank you for purchasing this Cambridge Audio Azur 340A or 340A SE
integrated amplifier.
The 340A has full protection against misuse and possible faults. The
overload and short-circuit protection systems continuously monitor the
voltage, current and temperature of the output devices, allowing the
protection to act positively in case of need, without triggering spuriously.
About the 340A
The design of a high quality but cost-effective audio amplifier presents
a major challenge. Providing first-class performance on an unlimited
budget is one matter; achieving the same performance within tight price
limits is quite another, and requires the expertise and experience that
Cambridge Audio brings to its product design process. We believe we
have succeeded in our aim of creating a first-class affordable amplifier.
About the 340A SE
The 340A Special Edition incorporates all the features of the 340A but
also has larger PSU reservoir capacitors for slightly more power coupled
to enhanced bass response and greater dynamics.
In addition the 340A SE has a convenient dedicated front mounted
TM
For instance, separate very high quality Integrated Circuit Amplifiers
modules are used for each channel for freedom from crosstalk and best
possible stereo imaging.
auxiliary MP3/iPod input for gaining the best possible sound quality
from portable music players. This input is automatically selected when
something is plugged into it.
The power supply is also a vital part of a power amplifier. A toroidal
transformer, selected for low external magnetic field, is used in
conjunction with generously specified reservoir capacitors and optimally
placed decoupling components.
Your amplifier can only be as good as the system it is connected to.
Please do not compromise on your source equipment, speakers or
cabling. Naturally we particularly recommend models from the
Cambridge Audio Azur range, which have been designed to the same
exacting standards as our amplifiers. Your dealer can also supply
excellent quality Cambridge Audio interconnects to ensure your system
realises its full potential.
Close attention has been paid to the performance and quality of the
passive components used, both in the signal paths and for decoupling
purposes.
Thanks for taking the time to read this manual, we do recommend you
keep it for future reference.
The 340A incorporates tone controls that give subtle control of the
frequency response, allowing the correction of imperfect source
material, and compensation for loudspeaker inadequacies or problems
with room acoustics. These tone controls can be switched completely
out of the audio path by use of the DIRECT switch, to give the shortest
possible audio path.
Matthew Bramble
Technical Director
Azur integrated amplifier 3
SAFETY PRECAUTIONS
The crossed-out wheeled bin is the European Union symbol for
indicating separate collection for electrical and electronic
equipment. This product contains electrical and electronic
equipment which should be reused, recycled or recovered and
should not be disposed of with unsorted regular waste. Please
return the unit or contact the authorised dealer from whom you
purchased this product for more information.
Checking the Power Supply Rating
For your own safety please read the following instructions carefully before attempting
to connect this unit to the mains.
Check that the rear of your unit indicates the correct supply voltage. If your mains
supply voltage is different, consult your dealer.
This unit is designed to operate only on the supply voltage and type that is
indicated on the rear panel of the unit. Connecting to other power sources may
damage the unit.
Plug Fitting Instructions (UK Only)
The cord supplied with this appliance is factory fitted with a 13 amp mains plug
fitted with a 3 amp fuse inside. If it is necessary to change the fuse, it is important
that a 3 amp one is used. If the plug needs to be changed because it is not suitable
for your socket, or becomes damaged, it should be cut off and an appropriate plug
fitted following the wiring instructions below. The plug must then be disposed of
safely, as insertion into a 13 amp socket is likely to cause an electrical hazard.
Should it be necessary to fit a 3-pin BS mains plug to the power cord the wires
should be fitted as shown in this diagram. The colours of the wires in the mains
lead of this appliance may not correspond with the coloured markings identifying
the terminals in your plug. Connect them as follows:
This equipment must be switched off when not in use and must not be used unless
correctly earthed. To reduce the risk of electric shock, do not remove the unit's
cover (or back). There are no user serviceable parts inside. Refer servicing to
qualified service personnel. If the power cord is fitted with a moulded mains plug
the unit must not be used if the plastic fuse carrier is not in place. Should you lose
the fuse carrier the correct part must be reordered from your Cambridge Audio
dealer.
The lightning flash with the arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of un-insulated
‘dangerous voltage’ within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter ‘N’ or coloured BLACK.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter ‘L’ or coloured RED.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
instructions in the service literature relevant to this appliance.
The wire which is coloured GREEN/YELLOW
must be connected to the terminal which is
marked with the letter ‘E’ or coloured GREEN.
This product complies with European Low
Voltage (73/23/EEC) and Electromagnetic Compatibility
(89/336/EEC) Directives when used and installed according to
this instruction manual. For continued compliance only
Cambridge Audio accessories should be used with this product
and servicing must be referred to qualified service personnel.
If your model does not have an earth wire, then disregard this instruction.
If a 13amp (BS 1363) plug is used, a 3amp fuse must be fitted, or if any other type
of plug is used a 3amp or 5amp fuse must be fitted, either in the plug or adaptor,
or on the distribution board.
4 Azur integrated amplifier
340A/340A SE Integrated amplifier
IMPORTANT SAFETY INSTRUCTIONS
Please take a moment to read these notes before installing your Azur
amplifier, they will enable you to get the best performance and prolong
the life of the product. We advise you follow all instructions, heed all
warnings and keep the instructions for future reference.
When using for the first time it is advisable that it is left on, playing
music, for at least 36 hours prior to critical listening. For subsequent
use, a warm up period of 10-15 minutes is recommended for maximum
enjoyment.
Only use the specified attachments/accessories with this unit.
This unit must be disconnected from the mains socket to be turned off
completely. If you do not intend to use this unit for a long period of time,
unplug it from the mains socket. Unplug this unit during lightning
storms.
The unit is of Class 1 construction and must be connected to a Mains
socket outlet with a protective earthing connection.
This unit must be installed on a sturdy, level surface. Do not place in a
sealed area such as a bookcase or in a cabinet. Any space open at the
back (such as a dedicated equipment rack) is fine however.
WARNING - To reduce the risk of fire or electric shock, do not expose this
unit to rain or moisture. This unit must not be exposed to dripping or
splashing water or other liquids. No objects filled with liquid, such as
vases, shall be placed on the unit. In the event of spillage, switch off
immediately, disconnect from the mains supply and contact your dealer
for advice.
When a cart is used, use caution when moving the cart to avoid
injury from tip-over.
The unit requires ventilation. Do not situate it on a rug or other soft
surface and do not obstruct any air inlets or outlet grilles. Do not install
near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any
cleaning fluids containing alcohol, ammonia or abrasives. Do not spray
an aerosol at or near the unit.
Ensure that small objects do not fall through any ventilation grille. If this
happens, switch off immediately, disconnect from the mains supply and
contact your dealer for advice.
Due to stray magnetic fields turntables should not be located nearby
due to interference.
It is recommended that when bi-amping, the same type power amplifiers
are used.
Refer all servicing to qualified service personnel. Servicing is required
when the unit has been damaged in any way, such as a damaged power-
supply cord or plug, liquid has been spilled or objects have fallen into the
unit, the unit has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
If you have checked the Troubleshooting section in this manual with no
improvement, do not attempt to repair, disassemble or reconstruct the
unit. A serious electric shock could result if this precautionary measure
is ignored.
Do not route the power cable so that it can be walked upon or damaged
by other items near it. The unit must be installed in manner that makes
disconnection of the mains plug from the mains socket outlet (or
appliance connector from the rear of the unit) possible.
Azur integrated amplifier 5
REAR PANEL CONNECTIONS
i g h t
t
e f
i g h t
t
e f
Caution
Serial Number Label Removed
azur 340A Integrated Amplifier
1
2
3
Designed and Enginin London, England
Power Rating: 230V AC 50Hz
Max Power Consumption 345W
u x
C D B A n u e T r / D V D
V / M D
e c - O u t
n I e p T a
Power AC
Caution
Risk of electric shock
Do not open
Impedance 4 - 8 ohms
Loudspeaker Terminals
t
L e f
4
Left
Avis
Risque de choc electrique
Ne pas ouvrir
5
Achtung Vorm offnen des gerates
R i g h
Right
Netzstecker ziehen
Manufactured in an ISO9002 approved facility
Right
Left
Right
Left
A
B
Aux
CD
Tuner / DAB
DVD
AV / MD
Rec-Out
Tape In
the other 5 inputs. For the 5 normal inputs, the source selected for
listening to will be sent out of Rec Out for recording. The source currently
being listened to and (optionally) recorded is then shown on the front
panel by a corresponding blue LED.
1 Aux, CD, Tuner/DAB, DVD, AV/MD
These inputs are suitable for any 'line level' source equipment such as
CD players, DAB or FM/AM tuners etc.
Note: These inputs are for analog audio signals only. They should not be
connected to the digital output of a CD player or any other digital device.
However, when the Tape Mon Input is selected a second LED will
illuminate indicating that the Tape Monitor Input is now being listened to
with a different source being sent out of the Rec output for recording.
The recording source is shown by the first LED and can be changed by
pressing the other source buttons. To switch Tape Monitor off, simply
press the Tape Mon button again, toggling this function off.
2 Record Out
This socket can be connected to a tape deck or to the analog Record In
sockets on a MiniDisc or CD recorder.
This feature is most useful when using 3-head analog cassette decks
which allow the signal being recorded to be played back live off tape (via
a 3rd head) whilst it is simultaneously recorded. It is then possible by
toggling the Tape Monitor input on and off to compare directly in real
time the original and recorded signal so that adjustments to the
recording parameters of the tape machine can be made (consult the
manual of your 3-head analog cassette deck for full details).
3 Tape In
Connect to a tape deck or to the analog output sockets on a MiniDisc,
portable digital music player or CD recorder using an interconnect cable
from the recorder's Line Out sockets to the amplifier's Tape In sockets.
The Tape Input circuit of the amplifier is a "monitor" type, different from
6 Azur integrated amplifier
340A/340A SE Integrated amplifier
4 Loudspeaker terminals
Two sets of loudspeaker terminals are available, A (main loudspeaker
terminals) and B (secondary switchable loudspeaker terminals).
Connect the wires from your left channel loudspeaker to the LEFT + & -
terminals, and the wires from the right channel loudspeaker to the
RIGHT + & - terminals. In each case, the red terminal is the positive
output and the black terminal is the negative output.
Care should be taken to ensure no stray strands of wire are shorting speaker
outputs together. Please ensure that the loudspeaker terminals have been
tightened adequately to provide a good electrical connection. It is possible
for the sound quality to be affected if the screw terminals are loose.
Note: When using one pair of speakers, use speakers with a nominal
impedance of between 4-8 ohms. When using two pairs of speakers,
use speakers with a nominal impedance of between 6-8 ohms each.
5
AC power socket
Once you have completed all connections to the amplifier, plug the AC
power cable into an appropriate mains socket. Your amplifier is now
ready for use.
Azur integrated amplifier 7
CONNECTING
When designing our amplifiers we have tried to include features that
allow you to connect your system in various ways. The inclusion of
features such as Speaker B connections mean that you can flexibly
configure your system depending on your requirements. The following
diagrams are designed to make connection easy.
Tape connection
The diagram below shows how to connect the amplifier to a tape
recorder or other source with a record and monitor connection.
Please note that either of the tape loop outputs can be used (as they are
both the same signal in parallel).
Basic connection
The diagram below shows the basic connection of your amplifier to a CD
player and a pair of loudspeakers.
Amplifier
Amplifier
i g h t
A
t
L e f
i g h t
t
e f
i g h t
A
t
e f
R i g h t
t
e f
Caution
Caution
Serial Number Label Removed
Serial Number Label Removed
azur 340A Integrated Amplifier
azur 340A Integrated Amplifier
Designed and Engineered in London, England
D B D / A r e n T V D
Designed and Engineered in London, England
Power Rating: 230V AC 50Hz
Max Power Consumption345W
Power Rating: 230V AC 50Hz
Max Power Consumption345W
x A u
u
M
/ D A V
- e c - O u t
e p I n T a
x A u
C D
B A
u n e r
/
D
D D V
D
M / A V
- e c - O u t
n
a p e
I
Power AC
Power AC
Caution
Risk of electric shock
Do not open
Caution
Risk of electric shock
Do not open
Impedance
Loudspeaker Terminals
4
-
8
ohms
Impedance
Loudspeaker Terminals
4
-
8
ohms
t
L e f
t
e f
Left
Left
Avis
Risque de choc electrique
Ne pas ouvrir
Avis
Risque de choc electrique
Ne pas ouvrir
Achtung Vorm offnen des gerates
Netzstecker ziehen
Achtung Vorm offnen des gerates
Netzstecker ziehen
R i g h
i g h t
Right
Right
Manufactured in an ISO9002 approved facility
Manufactured in an ISO9002 approved facility
Right
A
Left
Right
B
Left
Right
A
Left
Right
B
Left
Aux
CD
Tuner
/
DAB
DVD
AV
/
MD
Rec-Out
Tape In
Aux
CD
Tuner
/
DAB
DVD
AV
/
MD
Rec-Out
Tape In
CD Player
Tape / MD Player
azur 340C Compact Disc Player
Rec In
Rec Out
8 Azur integrated amplifier
340A/340A SE Integrated amplifier
Speaker B connections
The Speaker B connections on the back of the amplifier allow for a
second set of speakers to be used (ie speakers located in another
room). The Speaker B button on the front panel allows this second set
of speakers to be switched on and off.
Note: When using two pairs of speakers, use speakers with a nominal
impedance of between 6-8 ohms each.
Amplifier
g h t
t
L e f
i g h t
t
e f
Caution
Serial Number Label Removed
azur 340A Integrated Amplifier
Designed and Engineered in London, England
Power Rating: 230V AC 50Hz
Max Power Consumption345W
x A u
D
B A
n u e T r / D
V D
D
M / A V
e c - O u t
n
I e p T a
Power AC
Caution
Risk of electric shock
Do not open
Impedance
Loudspeaker Terminals
4
-
8
ohms
t
L e f
Left
Avis
Risque de choc electrique
Ne pas ouvrir
Achtung Vorm offnen des gerates
Netzstecker ziehen
R i g h
Right
Manufactured in an ISO9002 approved facility
Right
A
Left
Right
B
Left
Aux
CD
Tuner
/
DAB
DVD
AV
/
MD
Rec-Out
Tape In
CD Player
azur 340C Compact Disc Player
Azur integrated amplifier 9
FRONT PANEL CONTROLS
Volume
azur 340A
Integrated Amplifier
6
8
9
Bass
Treble
Balance
1
3
4
5
10
11
Power
Aux
CD
Tuner /DAB
DVD
AV / MD
Tape Mon
Phones
Speaker B
Direct
7
1 Power
3 Phones
Switches the unit on and off.
Allows for the connection of headphones with a ¼" jack plug connector.
Headphones with an impedance of 32 and 600 ohms are
recommended. When the headphones are connected, the loudspeaker
relay is released switching off the output to the loudspeakers (speakers
A and B).
2
Auxillary MP3 In (340A SE only)
Bass
Treble
2
Power
MP3 In
Phones
Speaker B
Direct
4
Speaker B
Turns on/off the secondary set of loudspeaker terminals on the back
panel. This can be used for listening to an extra set of loudspeakers in
another room.
Connect your MP3/iPod/portable music player to the 340A SE with a
3.5mm to 3.5mm jack plug lead. Plugging a source into the MP3 input
causes the 340A SE to automatically select this input. Remove the plug
to return to normal use.
Note: When using two pairs of speakers, use speakers with a nominal
impedance of between 6-8 ohms each.
Note: It is possible to use both the front and rear auxillary inputs
separately. The front input is selected by inserting a jack plug, while the
rear input is selected by pressing Aux on the front panel or remote.
10 Azur integrated amplifier
340A/340A SE Integrated amplifier
9
5 Direct
Balance
This control gives the audio signal a more direct path to the power
amplifier stage of your amplifier, bypassing the tone control circuits for
the purest possible sound quality.
This control allows you to adjust the relative output levels of the left and
right channels. In the central position the output from each channel is
equal. This control only modifies the sound through your loudspeakers
and the Pre-Out sockets, it does not affect the signals sent through the
Tape Out connections.
6 Bass and Treble
These controls allow subtle adjustments to the tonal balance of the
sound. In the central position these controls have no effect. These
controls only modify the sound through your loudspeakers and the Pre-
Out sockets, they do not affect the signals sent through the Tape Out
connections. With a well produced CD and a good system the tone
controls are unnecessary and can be switched out by the Direct switch.
If the musical recording is of poor quality or other factors are affecting
the sound quality, it may be necessary to adjust the tone controls to
compensate.
Aux, CD, Tuner/DAB, DVD, AV/MD
10
Push the appropriate input selection button to select the source
component that you wish to listen to. The signal selected is also fed to
the Tape Out sockets so that it may be recorded. The input should not
be changed whilst recording (but the recorded signal can be checked
using the tape input Tape Monitor).
11
Tape Monitor
This control lets you listen to the output signal from a tape recorder or
signal processor connected to the amplifier's Tape In/Rec Out sockets.
When Tape Monitor is selected, the source component chosen by the
input selection push buttons continues to be routed to the Rec Out
sockets for recording or processing.
7
Infrared sensor
Receives IR commands from the supplied Azur remote control. A clear
unobstructed line of sight between the remote control and the sensor is
required.
Volume
8
Use to increase/decrease the level of the sound from the outputs of the
amplifier. This control affects the level of the loudspeaker output, the
pre-amp output and the headphone output. It does not affect the Tape
Out connections. It is advisable to turn the Volume control fully anti-
clockwise before switching the amplifier on.
Azur integrated amplifier 11
REMOTE CONTROL
iPOD COMPATIBILITY
The 340A and 340A SE are supplied with an Azur remote control
that operates both this amplifier and Cambridge Audio Azur range
CD players. Insert the supplied AAA batteries to activate. The
functions relevant to the amplifier are as follows:
The 340A/340A SE remote control can now control the
basic functions of Apple iPods when mounted in Apple’s
Universal Dock (or other docks or IR receivers compatible
with the Apple Remote). Refer to your dock’s instruction
manual on how to connect it to your amplifier. We
recommend you plug your dock into the auxillary (Aux)
input on the rear of the unit.
Power
Switches Azur CD players between Standby and On.
To use the Azur remote to control the docked iPod, hold
down the Aux button whilst pressing one of the following
buttons:
Note: The 340A/340A SE is switched On/Off from the front panel
only.
Mute
Play/Pause
Mutes the audio on the amplifier. The mute mode is indicated by
the channel LED flashing. Press again to cancel mute.
Press to play the iPod, press again to pause play.
Skip
Volume +/-
Press once to skip forwards or backwards one track.
Increase or decrease the volume of the amplifier output.
Release the Aux button to return the remote control to
Aux, CD, Tuner/DAB, DVD, AV/MD, Tape Mon
normal functionality.
The six source select buttons are used to change the input source
to the amplifier.
For the 340A SE there is also a dedicated auxillary
MP3/iPod input on the front panel. Plugging a source into
the MP3 input causes the 340A SE to automatically select
the front auxillary input. Remove the plug to return to
normal use.
12 Azur integrated amplifier
340A/340A SE Integrated amplifier
PROTECTION SYSTEM
The Azur 340A/340A SE protection system comprises of:
Remedy - Ensure ventilation is not obstructed, and loudspeakers are not
of too low impedance. Switch the amplifier off for 15 minutes to cool
down if necessary.
1. Overload and Short-Circuit Protection
Indicator - Output distorted and at unexpectedly low level.
3. DC offset protection
Description - The amplifier is fully protected against excessively low load
impedances. The overload and short-circuit protection systems
continuously monitor the voltage, current and temperature conditions of
each of the output devices, and comparing them with the defined Safe
Operating Area or SOA. This sophisticated system allows the protection
to act positively in case of genuine necessity, but without false
triggering.
Indicator - Amplifier will not operate; all input LEDs are flashing.
Description - The DC offset protection system immediately isolates the
amplifier from the loudspeakers by positively opening an output relay, in
the unlikely event of an amplifier fault. Errors of either polarity on both
channels are detected.
Remedy - This can sometimes be triggered by excessive mains noise etc;
if so switching the unit off and on again will reset it. If unit will not reset
then there is an amplifier fault that will require servicing. Switch the unit
off and contact your dealer.
Remedy - Check loudspeaker impedance is not too low. Very often
loudspeakers of too low an impedance can be driven at low levels but
not high levels.
2. Over temperature detection
4. Voltage clamping
Indicator - Output appears to cut out frequently, independently on the
When rapid transients are applied to reactive loads in extreme
circumstances, flyback pulses can be generated which are larger than
the amplifier supply rail voltages and have the potential to cause harm
to the output devices. The amplifier has a comprehensive voltage
clamping system that ensures that such pulses are safely absorbed by
the amplifier and no damage can result.
two channels.
Description - The instantaneous temperatures of the output devices of
the amplifier are continuously monitored to ensure that junction
temperatures do not get dangerously high. When an over temperature
condition occurs, the output is muted until the devices cool. The
operation is carefully controlled to minimise the exposure of the output
devices to wide temperature variations, which can impair reliability by
thermal cycling. This is accomplished by making the muting periods
relatively short, so the amplifier appears to be turning on and off. This
puts the least stress on the output devices.
Azur integrated amplifier 13
TROUBLESHOOTING
There is no power
There is a loud buzz or hum
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
Check turntable or tone arm for ground and connection lead fault.
Ensure no interconnects are loose or defective.
Ensure that your tape deck/turntable is not too close to the amplifier.
There is no sound
Unable to make or play tape recordings
Make sure the unit is not in Standby mode.
Check that TAPE MON and TAPE OUT have been connected correctly.
Check that source component is properly connected.
Check that 'TAPE MON' is not switched on (unless tape input is required).
Check that your speakers are properly connected.
If using Speaker B terminals check they are switched on.
If channel LED is flashing turn mute off.
There is weak bass or diffused stereo imaging
Ensure that speakers are not wired out of phase.
There is no sound on one channel
Ensure that balance control is in the correct position.
Check speaker connections.
Check interconnects.
14 Azur integrated amplifier
340A/340A SE Integrated amplifier
TECHNICAL SPECIFICATIONS
This guide is designed to make installing and using this product as easy as
possible. Information in this document has been carefully checked for accuracy at
the time of printing; however, Cambridge Audio's policy is one of continuous
improvement, therefore design and specifications are subject to change without
prior notice. If you notice any errors please feel free to email us at:
340A
340A SE
Power output
40 watts (into 8Ω) 45 watts (into 8Ω)
50 watts (into 4Ω) 55 watts (into 4Ω)
This document contains proprietary information protected by copyright. All rights
are reserved. No part of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior written permission of the
manufacturer. All trademarks and registered trademarks are the property of their
respective owners.
Max power consumption
Total harmonic distortion
345w
360w
1kHz < 0.01%
1kHz < 0.01%
20kHz < 0.09%
20kHz < 0.09%
iPod is a registered trademark of Apple Computer, Inc. All rights reserved.
© Copyright Cambridge Audio Ltd 2006
Frequency response (-1dB) 5Hz - 50kHz
5Hz - 50kHz
92dB
S to N ratio (unweighted)
Slew rate (into 8Ω)
92dB
20V/uS
20V/uS
Dimensions (H x W x D)
70 x 430 x 310mm 70 x 430 x 310mm
(2.8 x 16.9 x 12.2”) (2.8 x 16.9 x 12.2”)
Weight
6.2kg (13.6Lbs)
6.2kg (13.6Lbs)
Azur integrated amplifier 15
LIMITED WARRANTY
Cambridge Audio warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below).
Cambridge Audio will repair or replace (at Cambridge Audio's option) this
product or any defective parts in this product. Warranty periods may vary
from country to country. If in doubt consult your dealer and ensure that
you retain proof of purchase.
Cambridge Audio dealer, or authorised service agent which is authorised
to do Cambridge Audio warranty work. Any unauthorised repairs will void
this Warranty. This Warranty does not cover products sold AS IS or WITH
ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY
ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. CAMBRIDGE AUDIO
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY IN
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND
IMPLIED WARRANTIES WHATSOEVER INCLUDING, BUT NOT LIMITED TO,
THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL
PURPOSE.
To obtain warranty service, please contact the Cambridge Audio
authorised dealer from which you purchased this product. If your dealer
is not equipped to perform the repair of your Cambridge Audio product,
it can be returned by your dealer to Cambridge Audio or an authorised
Cambridge Audio service agent. You will need to ship this product in
either its original packaging or packaging affording an equal degree of
protection.
Proof of purchase in the form of a bill of sale or receipted invoice, which
is evidence that this product is within the warranty period, must be
presented to obtain warranty service.
Some countries and US states do not allow the exclusion or limitation of
incidental or consequential damages or implied warranties so the above
exclusions may not apply to you. This Warranty gives you specific legal
rights, and you may have other statutory rights, which vary from state to
state or country to country.
This Warranty is invalid if (a) the factory-applied serial number has been
altered or removed from this product or (b) this product was not
purchased from a Cambridge Audio authorised dealer. You may call
Cambridge Audio or your local country Cambridge Audio distributor to
confirm that you have an unaltered serial number and/or you purchased
from a Cambridge Audio authorised dealer.
This Warranty does not cover cosmetic damage or damage due to acts
of God, accident, misuse, abuse, negligence, commercial use, or
modification of, or to any part of, the product. This Warranty does not
cover damage due to improper operation, maintenance or installation,
or attempted repair by anyone other than Cambridge Audio or a
16 Azur integrated amplifier
340A/340A SE Integrated amplifier
Azur integrated amplifier 17
|
Billy Goat Blower 440140 User Manual
Black Box Switch Blackbox ServTray User Manual
Blue Rhino Gas Grill GBT1030 User Manual
Bowers Wilkins Speaker 800D User Manual
Braun Food Processor MC 100 User Manual
Cecilware Kitchen Grill MFSGA 120 User Manual
CFM Corporation Outdoor Fireplace ODSHR42 User Manual
Chauvet Printer B 550 User Manual
Chevrolet Automobile 2008 Corvette User Manual
Chief Manufacturing Indoor Furnishings KSY220 User Manual