Lit. #: 91-0177/03-01
™
Harbormaster
35 x 60
Refractor
Telescope
Model 78-6036
TELESCOPE ASSEMBLY
Thank you for purchasing the Bushnell
Harbormaster Telescope!
Remove all components from the carton and identify
all components. READ THROUGH ASSEMBLY
INSTRUCTION BEFORE YOU ASSEMBLE YOUR
TELESCOPE.
Your new telescope has been designed and crafted with the
highest standards so that you may have years of enjoyment
out of this wonderful window to the world. This instrument
comes complete with a vintage solid brass telescope crafted
and polished to perfection, a solid wood base with antique
cherry finish, and a precision ground 60mm lens.
1. Set-Up Base and Mount
• Locate the Altazimuth Yoke Mount (3) preassembled to
the brass stand. Insert the threaded end of the brass
stand into the threaded receiver on the solid wood base
and tighten.
We would like to take this time to illustrate some of the
inherent traits of brass. Brass has a tendency to have minor
imperfections that should not be considered as defective.
Rather, these should be considered just for what they are--
common occurrences within the brass that add to the
character and antiquity of this product.
2. Attach Telescope
• Locate Telescope Main Tube (2). Secure telescope to
Altazimuth Yoke Mount (3) by positioning the telescope
between yoke. Carefully insert the Altitude Lock Knobs
(4) through the yoke mount and into the threaded
brackets on the side of telescope tube and remove lens
cover from 60mm Objective Lens (1).
It is our hope that you will enjoy and appreciate this fine
example of Old World craftsmanship and its authentic
design for years to come.
STANDARD EQUIPMENT
Your Bushnell Telescope is now ready to be used. To
obtain the fullest enjoyment from your telescope,
please refer to the additional information
• Solid Brass Telescope
• Solid Wood Base with Antique Cherry Finish
• Altazimuth Yoke Mount
• Hardware Pack:
Altitude Lock Knobs
Continued on page 2
|