®
Bush Hog TOUGH
3210 Series Rotary Cutters
BUSH HOG® TOUGH FeaTUReS
TOUGH 10 Gauge Deck Construction
TOUGH 7 Gauge Strongbacks
TOUGH 1/4 Inch Sidebands
TOUGH Rubber Cushioned axle arms
TOUGH 5 Year Gearbox Limited Warranty
TOUGH Powder Coat Paint
Model 3210
MODeLS
3210
3210 Offset
1/2
1/2
ft
Cutting Width
Cutting Capacity
10
ft
10
1/2
1/2
2
inch diameter
N/A
2
inch diameter
Offset Beyond Tractor Center Line
7 ft 10 inches
(Offset Models Only)
Dimensions (width x length)
Transport Width
11 ft 1 inch x 9 ft 10 inches (Lift)
10 ft 11 inches
11 ft 1 inch x 13 ft 5 inches (Pull)
10 ft 11 inches
Type Hitch
3 Point Category II & III Standard and
Quick Hitch, Cat. II & III Semi-Mount
and Center Pull (self leveling)
3 Point Category II & III Semi-Mount
and Pull Type (self leveling)
Cutting Height
Deck Thickness
Side Bands
2 to 13 inches
10 gauge
2 to 13 inches
10 gauge
1/4
1/4
x 10 inches
x 10 inches
Minimum Tractor HP
Driveline
60 PTO (Lift), 50 PTO (Pull)
55 PTO (Semi-Mount), 50 PTO (Pull)
ASAE Cat. 5 (540 RPM - Lift, Pull and
Semi-Mount), ASAE Cat. 4 (1000 RPM Pull)
ASAE Cat. 5 (540 RPM - Pull and Semi-Mount)
Cross Shaft
ASAE Cat. 5 Rubber Element
(3) 205 Center, 190 Outboard
540/1000 RPM
ASAE Cat. 5 Rubber Element
(2) 205 Main, 190 Outboard
540 RPM
Gearbox HP
Tractor PTO Speed
Driveline Protection
Height adjustment
Blade Holder(s)
Blades
4 Plate PTO Slip Clutch
Manual or hydraulic
Round
4 Plate PTO Slip Clutch
Manual or hydraulic
Round
1/2
1/2
x 4 inches - Uplift
x 4 inches - Uplift
Blade Tip Speed
Tires
16,881 FPM/540 RPM; 17,400/1000 RPM
Laminated, Pneumatic, Aircraft
16,881 FPM/540 RPM; 17,400/1000 RPM
Laminated, Pneumatic, Aircraft
axles
Rubber Cushioned, Choice of Single or Dual Axles for Pull Models
Deflectors
Front Belting, Rear Band, Optional Chains
Standard for Pull Models
2741 lbs
Front Belting, Rear Band, Optional Chains
Standard for Pull Models
2624 lbs
Safety Tow Chain
approximate Weight (Pull with Single Axle)
Options
Chain Shielding, Third Tailwheel for Lift or Semi-Mount Models
Warranty
1 year limited warranty with a 5 year gearbox limited warranty
• High blade tip speeds • Deep sidebands
FeaTUReS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 24
|