OWNER’S MANUAL
4-in-1 MULTI-USE Mixer
Model EP559V2
EURO-PRO Operating LLC
Boston, MA, 02465
1 (800) 798-7398
COPYRIGHT© EURO-PRO OPERATING LLC 2008
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS cont.
Before using your Bravetti Platinum Pro
Whisk:
5. Always release the blender switch
Low Speeds are suggested for
starting and blending dry and liquid
ingredients, folding in egg whites or to
break up potatoes for mashing.
Medium speeds are suggested for
beating egg whites, yolks or whole
eggs and whipping cream.
Higher speeds are suggested for all
medium speed applications as well as
light cake batters,and whipping cream
or mashing potatoes. Also for mixing
bread doughs with the dough hooks.
We recommend that you start at low
speed and gradually increase the
speed as required. For difficult or thick
mixtures, use “MAX” speed from the
outset to prevent the motor from
overloading.
Multi-Use Mixer for the first time, wash
the beaters, dough hooks, whisk and
containers in warm, sudsy water. Rinse
and dry thoroughly.
Warning: To avoid injury when inserting
or removing beaters, dough hooks,
whisk, hand blender or chopper, always
set the speed selector on ”0" and unplug
the appliance.
Warning: The unit is designed for
intermittent use. The maximum operating
time on settings “0-Max” is 5 minutes
non-stop with beaters, dough hooks, or
whisk. Maximum running time with the
chopper is 3 minutes and with the hand
blender 2 minutes.
The whisk is used to beat air into
mixtures such as egg whites, yolks or
cream. To insert whisk: There is only
one whisk provided. Hold whisk at stem
end and insert into one of the holes
until it clicks into place. DO NOT PUSH
WHISK IN FROM THE WIRE END AS
WIRES MAY BE DAMAGED.
before removing the stick blender
from the food, especially when using
the stick blender in liquids.
Always hold the unit with your hand
while processing. Never leave unit
unattended while plugged in .
Caution: Do not use the stick
blender on the stove. If you want to
use it in a saucepan while cooking,
you must first remove saucepan from
the stove and allow it to cool before
using the stick blender.
Adjustable Speed Control:
The speed control switch provides
variable speed selection.
Please Note: The stick blender
operates on one
speed ONLY - for
6. To remove the stick blender from
the main unit, first unplug the unit
from the power source and then turn
the stick blender 90º counter
clockwise and pull off.
safety reasons the
switch will not
Beaters, Dough Hooks, Whisk:
Select the attachment according to the
type of mixing required. Make sure that
the mixer is unplugged from power
source and speed selector is set on ”0"
before inserting or removing beaters,
dough hooks or whisk.
speed selector
function with the stick blender.
Warning: Never operate the appliance
without all the parts in place. Make sure
that all parts are properly assembled
before turning on the unit.
Caution: When using dough
Beaker:
hooks for heavy or thick dough, use
only MAX speed from the outset to
prevent the motor from overheating.
Always make sure that the beaters are
free to rotate properly in the container.
Use the beaker with with the stick
blender or you can use any other
container.
Do not use the beaker in the microwave
oven.
Do not use the beaker with beaters,
whisk or dough hooks.
The beaker is intended only for
processing small quantities with the stick
blender.
Stick Blender:
Beaters:
1. Make sure that the unit is unplugged
from power source before attaching
or removing the stick blender.
Use for liquid mixes such as creams,
egg-whites, confectionery doughs, etc.
insert stem end of beaters (one at a time)
into the openings in the mixer. Insert the
beater with the metal ring in the larger of
the two holes. The metal ring on the
beater must sit below the surface of the
mixer housing. To ease the inserting of
the beaters, a slight twisting motion will
aid in engaging the beater drive tabs.
Install the second beater in the same
manner as above. (If there is no ring on
one of your beaters, either beater can be
inserted into either hole of the mixer.)
Dough hooks:
Warning: To avoid personal injury
and damage to beaters, do not
attempt to scrape bowl while mixer is
operating , turn mixer OFF. Should
scraper or other object drop into bowl,
turn motor OFF before removing.
2. Remove the unit from the main
stand and open the safety cover.
3. Align the arrow on the stick blender
with the arrow on the main unit.
Once fully inserted, turn clockwise
90º to lock.
Hand Mixer:
To remove beaters, dough
hooks, or whisk set speed selector
on ’0', unplug unit from power source,
and press the release button to
remove the beaters, dough hooks, or
whisk from the hand mixer. This
button only works if the speed control
switch is set on ’0'.
To avoid spattering, always put beaters,
dough hooks or whisk into the ingredients
to be mixed before starting the mixer.
Make sure that the rear safety cover is
properly closed, otherwise, for safety
reasons the unit will not operate.
Use for light doughs. Insert dough hooks
in the same way as beaters above. See
installing instructions for beaters above.
Always use both dough hooks. Never try
to work with one beater and one dough
hook at the same time. Do not use
dough hooks at low speeds as this may
cause motor to overheat. When using
dough hooks for heavy or thick dough,
use only high speed (MAX) from the
beginning to prevent the motor from
overheating (blocking).
Warning: This appliance is designed
for intermittent use. Maximum
running time with the hand blender is
2 minutes. After this time, allow the
unit to cool.
1. Select the required speed using
your thumb to slide the speed
control switch to the required
position: “0 - Max”.
4. To avoid spattering, place the stick
blender first in the food to be beaten
or chopped and then press the
blender switch. Do not use the stick
blender in boiling or very hot
ingredients. Do not use on stove.
3
4
OPERATING INSTRUCTIONS cont.
OPERATING INSTRUCTIONS cont.
ICE CRUSHING:
CLEANING & MAINTENANCE:
CHOPPER:
Caution: Always hold the hand
mixer with your hand while
processing. Do not leave the
appliance unattended when plugged
in.
Make sure that the unit is unplugged
from power source and speed control
switch is on ”0" before inserting or
removing the chopper attachment.
•
•
•
Make sure that the unit is switched
“OFF” and disconnected from
power outlet before cleaning.
Never immerse the hand mixer or
power cord in water or any other
liquid.
Caution: Always unplug the unit
from power outlet before changing
or assembly of accessories.
1. Place the blade support and the
chopping blade into the chopping
bowl.
Do not use to chop very hard foods
such as coffee beans or nutmeg.
Use for hard cheese, carrots, onions,
tomatoes, parsley, etc.
Warning: Use extreme caution-
blades are sharp. Always hold the
chopper blade by the spindle.
Beaters, Dough Hooks and
Whisk: Eject beaters, dough hooks
and whisk from mixer and wash in
warm soapy water as soon as
possible after use before foods set
and dry. Rinse and dry after
washing. Beaters, dough hooks and
whisk can be washed in dishwasher.
Stick Blender Attachment: Use
caution - blade is sharp. Detach
stick blender from mixer and wash
with warm soapy water. Do not use
any sharp objects to clean residue
under the blade, as this may
damage the housing. Do not wash
in dishwasher.
2. Add ice to be crushed. Do not
attempt to chop more than four or
five ice cubes at a time.
1. Remove the blade cover from the
chopper blade.
Important: To mince meat, cut the
meat into 1" cubes and do not mince
more than 200 grams (7 ounces) at
once. Make sure the meat is fully
defrosted and all bones and gristle
have been removed.
2. Place the blade support into the
chopping bowl ensuring that the
locator pins are engaged.
3. Put the blade assembly on the
blade support of the chopper
bowl .
4. Place the chopper bowl on the anti-
skid base (bowl cover).
5. Place the food to be chopped in the
bowl.
6. Position the gear box on the
chopper bowl, fitting the grooves on
the gear box and bowl so that they
engage the bowl.
7. Insert the gear box drive shaft
into the corresponding opening on
the bottom of the hand mixer until
the gear box is securely locked in
place.
3. Install the gearbox as per chopping
instructions on page 4.
4. Plug the unit into the power outlet.
•
•
5. Firmly hold the chopping bowl with
one hand while momentarily
Always allow cooked food to cool
before placing in the chopping bowl.
The anti-skid base can also be used as
a cover for the chopper bowl.
depressing the power switch on the
main unit. Do not run the unit
continuously for more than 4
seconds at a time when crushing
ice. Use short bursts of power.
Note: The processing time required
depends upon the type and quantity of
food to be processed and on the
degree of fineness you require. Meat
(200 grams/7 ounces - 1 inch cubes),
hard cheese (100 grams/3 1/2 ounces -
1 inch pieces) and carrots (150 grams/5
1/4 ounces - cut in pieces) usually
would require approximately 15
seconds. Onions (quartered) require
approximately 5-10 seconds. Parsley
(stems removed) approximately 15-20
seconds.
Chopper Attachment: Use extra
caution when handling the chopping
blade. Always hold by the spindle.
Do not immerse the gear box in
water.
•
•
Clean the stand with warm soapy
water.
The hand mixer unit, power cord
and gear box should be wiped with
a damp cloth and then dried
thoroughly.
Drive Shaft
•
Chopper blade, blade support,
chopper bowl, beaker and anti-skid
base/lids can be put in the
dishwaser.
Insert drive
shaft in
small hole
WARNING: This appliance is
designed for intermittent use.
Maximum running time with chopper is
3 minutes. After 3 minutes, allow the
unit to cool.
5
6
Model EP559V2
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in m aterial and
workm anship for a period of one (1) year from the date of purchase when utilized for normal
household use.
If your appliance fails to operate properly while in use under normal household conditions
within the warranty period, return the com plete appliance and accessories, freight prepaid. For
If the appliance is found by EURO-PRO Operating LLC to be defective in m aterial or
workm anship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of
purchase date and $9.95 to cover the cost of return shipping and handling must be included.*
The liability of EURO-PRO Operating LLC is lim ited solely to the cost of the repair or
replacement of the unit at our option. This warranty does not cover norm al wear of parts and
does not apply to any unit that has been tampered with or used for com m ercial purposes. This
lim ited warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or m ishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal
and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is
lim ited to the specific obligations expressly assum ed by it under the term s of the lim ited
warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential
damages of any nature whatsoever. Som e states do not permit the exclusion or lim itation of
incidental or consequential dam ages, so the above m ay not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
*Important: Carefully pack item to avoid dam age in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, com plete
address and phone num ber with a note giving purchase inform ation, m odel number and
what you believe is the problem with item. W e recomm end you insure the package (as
damage in shipping is not covered by your warranty). M ark the outside of your package
“ATTENTION CUSTOM ER SERVICE”.
OW NERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please fill out and mail the product registration card within ten (10) days of purchase. The
registration will enable us to contact you in the unlikely event of a product safety notification. By
returning this card you acknowledge to have read and understood the instructions for use, and
warnings set forth in the accom panying instructions.
RETURN TO EURO-PRO Operating LLC, 4400 Bois Franc, St-Laurent, QC, H4S 1A7
________________________________________________________________
Model EP559V2
Appliance m odel
________________________________________________________________
Date purchased
Nam e of store
________________________________________________________________
Owner’s nam e
________________________________________________________________
Address
City
Prov
Postal Code
Printed in China
|